From 08f87f769b595151be1afeff53e144f543faa614 Mon Sep 17 00:00:00 2001
From: hc <hc@nodka.com>
Date: Wed, 06 Dec 2023 09:51:13 +0000
Subject: [PATCH] add dts config
---
kernel/arch/arm/boot/dts/at91-sama5d2_xplained.dts | 305 ++++++++++++++++++++++++++++++++++++++------------
1 files changed, 228 insertions(+), 77 deletions(-)
diff --git a/kernel/arch/arm/boot/dts/at91-sama5d2_xplained.dts b/kernel/arch/arm/boot/dts/at91-sama5d2_xplained.dts
index fcc85d7..08c5182 100644
--- a/kernel/arch/arm/boot/dts/at91-sama5d2_xplained.dts
+++ b/kernel/arch/arm/boot/dts/at91-sama5d2_xplained.dts
@@ -1,56 +1,28 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
/*
* at91-sama5d2_xplained.dts - Device Tree file for SAMA5D2 Xplained board
*
* Copyright (C) 2015 Atmel,
* 2015 Nicolas Ferre <nicolas.ferre@atmel.com>
- *
- * This file is dual-licensed: you can use it either under the terms
- * of the GPL or the X11 license, at your option. Note that this dual
- * licensing only applies to this file, and not this project as a
- * whole.
- *
- * a) This file is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of the
- * License, or (at your option) any later version.
- *
- * This file is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * Or, alternatively,
- *
- * b) Permission is hereby granted, free of charge, to any person
- * obtaining a copy of this software and associated documentation
- * files (the "Software"), to deal in the Software without
- * restriction, including without limitation the rights to use,
- * copy, modify, merge, publish, distribute, sublicense, and/or
- * sell copies of the Software, and to permit persons to whom the
- * Software is furnished to do so, subject to the following
- * conditions:
- *
- * The above copyright notice and this permission notice shall be
- * included in all copies or substantial portions of the Software.
- *
- * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
- * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
- * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
- * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
- * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
- * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
- * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
- * OTHER DEALINGS IN THE SOFTWARE.
*/
/dts-v1/;
#include "sama5d2.dtsi"
#include "sama5d2-pinfunc.h"
#include <dt-bindings/mfd/atmel-flexcom.h>
#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/regulator/active-semi,8945a-regulator.h>
/ {
model = "Atmel SAMA5D2 Xplained";
compatible = "atmel,sama5d2-xplained", "atmel,sama5d2", "atmel,sama5";
+
+ aliases {
+ serial0 = &uart1; /* DBGU */
+ i2c0 = &i2c0;
+ i2c1 = &i2c1;
+ i2c2 = &i2c2; /* XPRO EXT2 */
+ };
chosen {
stdout-path = "serial0:115200n8";
@@ -108,6 +80,58 @@
};
apb {
+ qspi0: spi@f0020000 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_qspi0_default>;
+ status = "disabled"; /* conflict with sdmmc1 */
+
+ flash@0 {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ compatible = "jedec,spi-nor";
+ reg = <0>;
+ spi-max-frequency = <80000000>;
+ spi-tx-bus-width = <4>;
+ spi-rx-bus-width = <4>;
+ m25p,fast-read;
+
+ at91bootstrap@00000000 {
+ label = "at91bootstrap";
+ reg = <0x00000000 0x00040000>;
+ };
+
+ bootloader@00040000 {
+ label = "bootloader";
+ reg = <0x00040000 0x000c0000>;
+ };
+
+ bootloaderenvred@00100000 {
+ label = "bootloader env redundant";
+ reg = <0x00100000 0x00040000>;
+ };
+
+ bootloaderenv@00140000 {
+ label = "bootloader env";
+ reg = <0x00140000 0x00040000>;
+ };
+
+ dtb@00180000 {
+ label = "device tree";
+ reg = <0x00180000 0x00080000>;
+ };
+
+ kernel@00200000 {
+ label = "kernel";
+ reg = <0x00200000 0x00600000>;
+ };
+
+ misc@00800000 {
+ label = "misc";
+ reg = <0x00800000 0x00000000>;
+ };
+ };
+ };
+
spi0: spi@f8000000 {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_spi0_default>;
@@ -145,16 +169,6 @@
};
};
- pdmic@f8018000 {
- pinctrl-names = "default";
- pinctrl-0 = <&pinctrl_pdmic_default>;
- atmel,model = "PDMIC @ sama5d2_xplained";
- atmel,mic-min-freq = <1000000>;
- atmel,mic-max-freq = <3246000>;
- atmel,mic-offset = <0x0>;
- status = "okay";
- };
-
uart1: serial@f8020000 {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_uart1_default>;
@@ -165,8 +179,11 @@
i2c0: i2c@f8028000 {
dmas = <0>, <0>;
- pinctrl-names = "default";
+ pinctrl-names = "default", "gpio";
pinctrl-0 = <&pinctrl_i2c0_default>;
+ pinctrl-1 = <&pinctrl_i2c0_gpio>;
+ sda-gpios = <&pioA PIN_PD21 GPIO_ACTIVE_HIGH>;
+ scl-gpios = <&pioA PIN_PD22 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
i2c-sda-hold-time-ns = <350>;
status = "okay";
@@ -181,49 +198,102 @@
regulator-name = "VDD_1V35";
regulator-min-microvolt = <1350000>;
regulator-max-microvolt = <1350000>;
+ regulator-allowed-modes = <ACT8945A_REGULATOR_MODE_FIXED>,
+ <ACT8945A_REGULATOR_MODE_LOWPOWER>;
+ regulator-initial-mode = <ACT8945A_REGULATOR_MODE_FIXED>;
regulator-always-on;
+
+ regulator-state-mem {
+ regulator-on-in-suspend;
+ regulator-suspend-min-microvolt=<1400000>;
+ regulator-suspend-max-microvolt=<1400000>;
+ regulator-changeable-in-suspend;
+ regulator-mode=<ACT8945A_REGULATOR_MODE_LOWPOWER>;
+ };
};
vdd_1v2_reg: REG_DCDC2 {
regulator-name = "VDD_1V2";
regulator-min-microvolt = <1100000>;
regulator-max-microvolt = <1300000>;
+ regulator-allowed-modes = <ACT8945A_REGULATOR_MODE_FIXED>,
+ <ACT8945A_REGULATOR_MODE_LOWPOWER>;
+ regulator-initial-mode = <ACT8945A_REGULATOR_MODE_FIXED>;
regulator-always-on;
+
+ regulator-state-mem {
+ regulator-off-in-suspend;
+ };
};
vdd_3v3_reg: REG_DCDC3 {
regulator-name = "VDD_3V3";
regulator-min-microvolt = <3300000>;
regulator-max-microvolt = <3300000>;
+ regulator-allowed-modes = <ACT8945A_REGULATOR_MODE_FIXED>,
+ <ACT8945A_REGULATOR_MODE_LOWPOWER>;
+ regulator-initial-mode = <ACT8945A_REGULATOR_MODE_FIXED>;
regulator-always-on;
+
+ regulator-state-mem {
+ regulator-off-in-suspend;
+ };
};
vdd_fuse_reg: REG_LDO1 {
regulator-name = "VDD_FUSE";
regulator-min-microvolt = <2500000>;
regulator-max-microvolt = <2500000>;
+ regulator-allowed-modes = <ACT8945A_REGULATOR_MODE_NORMAL>,
+ <ACT8945A_REGULATOR_MODE_LOWPOWER>;
+ regulator-initial-mode = <ACT8945A_REGULATOR_MODE_NORMAL>;
regulator-always-on;
+
+ regulator-state-mem {
+ regulator-off-in-suspend;
+ };
};
vdd_3v3_lp_reg: REG_LDO2 {
regulator-name = "VDD_3V3_LP";
regulator-min-microvolt = <3300000>;
regulator-max-microvolt = <3300000>;
+ regulator-allowed-modes = <ACT8945A_REGULATOR_MODE_NORMAL>,
+ <ACT8945A_REGULATOR_MODE_LOWPOWER>;
+ regulator-initial-mode = <ACT8945A_REGULATOR_MODE_NORMAL>;
regulator-always-on;
+
+ regulator-state-mem {
+ regulator-off-in-suspend;
+ };
};
vdd_led_reg: REG_LDO3 {
regulator-name = "VDD_LED";
regulator-min-microvolt = <3300000>;
regulator-max-microvolt = <3300000>;
+ regulator-allowed-modes = <ACT8945A_REGULATOR_MODE_NORMAL>,
+ <ACT8945A_REGULATOR_MODE_LOWPOWER>;
+ regulator-initial-mode = <ACT8945A_REGULATOR_MODE_NORMAL>;
regulator-always-on;
+
+ regulator-state-mem {
+ regulator-off-in-suspend;
+ };
};
vdd_sdhc_1v8_reg: REG_LDO4 {
regulator-name = "VDD_SDHC_1V8";
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <1800000>;
+ regulator-allowed-modes = <ACT8945A_REGULATOR_MODE_NORMAL>,
+ <ACT8945A_REGULATOR_MODE_LOWPOWER>;
+ regulator-initial-mode = <ACT8945A_REGULATOR_MODE_NORMAL>;
regulator-always-on;
+
+ regulator-state-mem {
+ regulator-off-in-suspend;
+ };
};
};
@@ -255,20 +325,29 @@
status = "disabled"; /* conflict with ISC_D2 & ISC_D3 data pins */
uart5: serial@200 {
- compatible = "atmel,at91sam9260-usart";
- reg = <0x200 0x200>;
- interrupts = <19 IRQ_TYPE_LEVEL_HIGH 7>;
- clocks = <&flx0_clk>;
- clock-names = "usart";
+ dmas = <0>, <0>;
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_flx0_default>;
- atmel,fifo-size = <32>;
status = "okay";
+ };
+
+ i2c2: i2c@600 {
+ dmas = <0>, <0>;
+ pinctrl-names = "default", "gpio";
+ pinctrl-0 = <&pinctrl_flx0_default>;
+ pinctrl-1 = <&pinctrl_i2c2_gpio>;
+ sda-gpios = <&pioA PIN_PB28 GPIO_ACTIVE_HIGH>;
+ scl-gpios = <&pioA PIN_PB29 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+ i2c-sda-hold-time-ns = <350>;
+ i2c-analog-filter;
+ i2c-digital-filter;
+ i2c-digital-filter-width-ns = <35>;
+ status = "disabled"; /* conflict with ISC_D2 & ISC_D3 data pins */
};
};
shdwc@f8048010 {
- atmel,shdwc-debouncer = <976>;
+ debounce-delay-us = <976>;
atmel,wakeup-rtc-timer;
input@0 {
@@ -279,6 +358,12 @@
watchdog@f8048040 {
status = "okay";
+ };
+
+ i2s0: i2s@f8050000 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_i2s0_default>;
+ status = "disabled"; /* conflict with can0 */
};
can0: can@f8054000 {
@@ -299,26 +384,30 @@
atmel,flexcom-mode = <ATMEL_FLEXCOM_MODE_TWI>;
status = "okay";
- i2c2: i2c@600 {
- compatible = "atmel,sama5d2-i2c";
- reg = <0x600 0x200>;
- interrupts = <23 IRQ_TYPE_LEVEL_HIGH 7>;
+ i2c6: i2c@600 {
dmas = <0>, <0>;
- dma-names = "tx", "rx";
- #address-cells = <1>;
- #size-cells = <0>;
- clocks = <&flx4_clk>;
- pinctrl-names = "default";
+ pinctrl-names = "default", "gpio";
pinctrl-0 = <&pinctrl_flx4_default>;
- atmel,fifo-size = <16>;
+ pinctrl-1 = <&pinctrl_flx4_gpio>;
+ sda-gpios = <&pioA PIN_PD12 GPIO_ACTIVE_HIGH>;
+ scl-gpios = <&pioA PIN_PD13 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+ i2c-analog-filter;
+ i2c-digital-filter;
+ i2c-digital-filter-width-ns = <35>;
status = "okay";
};
};
i2c1: i2c@fc028000 {
dmas = <0>, <0>;
- pinctrl-names = "default";
+ pinctrl-names = "default", "gpio";
pinctrl-0 = <&pinctrl_i2c1_default>;
+ i2c-analog-filter;
+ i2c-digital-filter;
+ i2c-digital-filter-width-ns = <35>;
+ pinctrl-1 = <&pinctrl_i2c1_gpio>;
+ sda-gpios = <&pioA PIN_PD4 GPIO_ACTIVE_HIGH>;
+ scl-gpios = <&pioA PIN_PD5 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
status = "okay";
at24@54 {
@@ -392,12 +481,16 @@
bias-pull-up;
};
- pinctrl_classd_default: classd_default {
+ pinctrl_classd_default_pfets: classd_default_pfets {
pinmux = <PIN_PB1__CLASSD_R0>,
- <PIN_PB2__CLASSD_R1>,
- <PIN_PB3__CLASSD_R2>,
- <PIN_PB4__CLASSD_R3>;
+ <PIN_PB3__CLASSD_R2>;
bias-pull-up;
+ };
+
+ pinctrl_classd_default_nfets: classd_default_nfets {
+ pinmux = <PIN_PB2__CLASSD_R1>,
+ <PIN_PB4__CLASSD_R3>;
+ bias-pull-down;
};
pinctrl_flx0_default: flx0_default {
@@ -412,15 +505,57 @@
bias-disable;
};
+ pinctrl_flx4_gpio: flx4_gpio {
+ pinmux = <PIN_PD12__GPIO>,
+ <PIN_PD13__GPIO>;
+ bias-disable;
+ };
+
pinctrl_i2c0_default: i2c0_default {
pinmux = <PIN_PD21__TWD0>,
<PIN_PD22__TWCK0>;
bias-disable;
};
+ pinctrl_i2c0_gpio: i2c0_gpio {
+ pinmux = <PIN_PD21__GPIO>,
+ <PIN_PD22__GPIO>;
+ bias-disable;
+ };
+
pinctrl_i2c1_default: i2c1_default {
pinmux = <PIN_PD4__TWD1>,
<PIN_PD5__TWCK1>;
+ bias-disable;
+ };
+
+ pinctrl_i2c1_gpio: i2c1_gpio {
+ pinmux = <PIN_PD4__GPIO>,
+ <PIN_PD5__GPIO>;
+ bias-disable;
+ };
+
+ pinctrl_i2c2_gpio: i2c2_gpio {
+ pinmux = <PIN_PB28__GPIO>,
+ <PIN_PB29__GPIO>;
+ bias-disable;
+ };
+
+ pinctrl_i2s0_default: i2s0_default {
+ pinmux = <PIN_PC1__I2SC0_CK>,
+ <PIN_PC2__I2SC0_MCK>,
+ <PIN_PC3__I2SC0_WS>,
+ <PIN_PC4__I2SC0_DI0>,
+ <PIN_PC5__I2SC0_DO0>;
+ bias-disable;
+ };
+
+ pinctrl_i2s1_default: i2s1_default {
+ pinmux = <PIN_PA15__I2SC1_CK>,
+ <PIN_PA14__I2SC1_MCK>,
+ <PIN_PA16__I2SC1_WS>,
+ <PIN_PA17__I2SC1_DI0>,
+ <PIN_PA18__I2SC1_DO0>;
bias-disable;
};
@@ -455,10 +590,20 @@
bias-disable;
};
- pinctrl_pdmic_default: pdmic_default {
- pinmux = <PIN_PB26__PDMIC_DAT>,
- <PIN_PB27__PDMIC_CLK>;
- bias-disable;
+ pinctrl_qspi0_default: qspi0_default {
+ sck_cs {
+ pinmux = <PIN_PA22__QSPI0_SCK>,
+ <PIN_PA23__QSPI0_CS>;
+ bias-disable;
+ };
+
+ data {
+ pinmux = <PIN_PA24__QSPI0_IO0>,
+ <PIN_PA25__QSPI0_IO1>,
+ <PIN_PA26__QSPI0_IO2>,
+ <PIN_PA27__QSPI0_IO3>;
+ bias-pull-up;
+ };
};
pinctrl_sdmmc0_default: sdmmc0_default {
@@ -540,10 +685,16 @@
classd: classd@fc048000 {
pinctrl-names = "default";
- pinctrl-0 = <&pinctrl_classd_default>;
+ pinctrl-0 = <&pinctrl_classd_default_pfets &pinctrl_classd_default_nfets>;
atmel,pwm-type = "diff";
atmel,non-overlap-time = <10>;
status = "okay";
+ };
+
+ i2s1: i2s@fc04c000 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_i2s1_default>;
+ status = "disabled"; /* conflict with spi0, sdmmc1 */
};
can1: can@fc050000 {
@@ -563,7 +714,7 @@
bp1 {
label = "PB_USER";
gpios = <&pioA PIN_PB9 GPIO_ACTIVE_LOW>;
- linux,code = <0x104>;
+ linux,code = <KEY_PROG1>;
wakeup-source;
};
};
--
Gitblit v1.6.2