From 071106ecf68c401173c58808b1cf5f68cc50d390 Mon Sep 17 00:00:00 2001
From: hc <hc@nodka.com>
Date: Fri, 05 Jan 2024 08:39:27 +0000
Subject: [PATCH] change wifi driver to cypress
---
kernel/drivers/iio/adc/Kconfig | 331 +++++++++++++++++++++++++++++++++++++++++++++++++++----
1 files changed, 306 insertions(+), 25 deletions(-)
diff --git a/kernel/drivers/iio/adc/Kconfig b/kernel/drivers/iio/adc/Kconfig
index e758537..2760f1e 100644
--- a/kernel/drivers/iio/adc/Kconfig
+++ b/kernel/drivers/iio/adc/Kconfig
@@ -1,3 +1,4 @@
+# SPDX-License-Identifier: GPL-2.0-only
#
# ADC drivers
#
@@ -5,10 +6,50 @@
menu "Analog to digital converters"
+config AB8500_GPADC
+ bool "ST-Ericsson AB8500 GPADC driver"
+ depends on AB8500_CORE && REGULATOR_AB8500
+ default y
+ help
+ AB8500 Analog Baseband, mixed signal integrated circuit GPADC
+ (General Purpose Analog to Digital Converter) driver used to monitor
+ internal voltages, convert accessory and battery, AC (charger, mains)
+ and USB voltages integral to the U8500 platform.
+
config AD_SIGMA_DELTA
tristate
select IIO_BUFFER
select IIO_TRIGGERED_BUFFER
+
+config AD7091R5
+ tristate "Analog Devices AD7091R5 ADC Driver"
+ depends on I2C
+ select REGMAP_I2C
+ help
+ Say yes here to build support for Analog Devices AD7091R-5 ADC.
+
+config AD7124
+ tristate "Analog Devices AD7124 and similar sigma-delta ADCs driver"
+ depends on SPI_MASTER
+ select AD_SIGMA_DELTA
+ help
+ Say yes here to build support for Analog Devices AD7124-4 and AD7124-8
+ SPI analog to digital converters (ADC).
+
+ To compile this driver as a module, choose M here: the module will be
+ called ad7124.
+
+config AD7192
+ tristate "Analog Devices AD7190 AD7192 AD7193 AD7195 ADC driver"
+ depends on SPI
+ select AD_SIGMA_DELTA
+ help
+ Say yes here to build support for Analog Devices AD7190,
+ AD7192, AD7193 or AD7195 SPI analog to digital converters (ADC).
+ If unsure, say N (but it's safe to say "Y").
+
+ To compile this driver as a module, choose M here: the
+ module will be called ad7192.
config AD7266
tristate "Analog Devices AD7265/AD7266 ADC driver"
@@ -33,6 +74,16 @@
To compile this driver as a module, choose M here: the
module will be called ad7291.
+config AD7292
+ tristate "Analog Devices AD7292 ADC driver"
+ depends on SPI
+ help
+ Say yes here to build support for Analog Devices AD7292
+ 8 Channel ADC with temperature sensor.
+
+ To compile this driver as a module, choose M here: the
+ module will be called ad7292.
+
config AD7298
tristate "Analog Devices AD7298 ADC driver"
depends on SPI
@@ -46,17 +97,47 @@
module will be called ad7298.
config AD7476
- tristate "Analog Devices AD7476 and similar 1-channel ADCs driver"
+ tristate "Analog Devices AD7476 1-channel ADCs driver and other similar devices from AD an TI"
depends on SPI
select IIO_BUFFER
select IIO_TRIGGERED_BUFFER
help
- Say yes here to build support for Analog Devices AD7273, AD7274, AD7276,
- AD7277, AD7278, AD7475, AD7476, AD7477, AD7478, AD7466, AD7467, AD7468,
- AD7495, AD7910, AD7920, AD7920 SPI analog to digital converters (ADC).
+ Say yes here to build support for the following SPI analog to
+ digital converters (ADCs):
+ Analog Devices: AD7273, AD7274, AD7276, AD7277, AD7278, AD7475,
+ AD7476, AD7477, AD7478, AD7466, AD7467, AD7468, AD7495, AD7910,
+ AD7920.
+ Texas Instruments: ADS7866, ADS7867, ADS7868.
To compile this driver as a module, choose M here: the
module will be called ad7476.
+
+config AD7606
+ tristate
+ select IIO_BUFFER
+ select IIO_TRIGGERED_BUFFER
+
+config AD7606_IFACE_PARALLEL
+ tristate "Analog Devices AD7606 ADC driver with parallel interface support"
+ depends on HAS_IOMEM
+ select AD7606
+ help
+ Say yes here to build parallel interface support for Analog Devices:
+ ad7605-4, ad7606, ad7606-6, ad7606-4 analog to digital converters (ADC).
+
+ To compile this driver as a module, choose M here: the
+ module will be called ad7606_parallel.
+
+config AD7606_IFACE_SPI
+ tristate "Analog Devices AD7606 ADC driver with spi interface support"
+ depends on SPI
+ select AD7606
+ help
+ Say yes here to build spi interface support for Analog Devices:
+ ad7605-4, ad7606, ad7606-6, ad7606-4 analog to digital converters (ADC).
+
+ To compile this driver as a module, choose M here: the
+ module will be called ad7606_spi.
config AD7766
tristate "Analog Devices AD7766/AD7767 ADC driver"
@@ -69,6 +150,31 @@
To compile this driver as a module, choose M here: the module will be
called ad7766.
+
+config AD7768_1
+ tristate "Analog Devices AD7768-1 ADC driver"
+ depends on SPI
+ select IIO_BUFFER
+ select IIO_TRIGGER
+ select IIO_TRIGGERED_BUFFER
+ help
+ Say yes here to build support for Analog Devices AD7768-1 SPI
+ simultaneously sampling sigma-delta analog to digital converter (ADC).
+
+ To compile this driver as a module, choose M here: the module will be
+ called ad7768-1.
+
+config AD7780
+ tristate "Analog Devices AD7780 and similar ADCs driver"
+ depends on SPI
+ depends on GPIOLIB || COMPILE_TEST
+ select AD_SIGMA_DELTA
+ help
+ Say yes here to build support for Analog Devices AD7170, AD7171,
+ AD7780 and AD7781 SPI analog to digital converters (ADC).
+
+ To compile this driver as a module, choose M here: the
+ module will be called ad7780.
config AD7791
tristate "Analog Devices AD7791 ADC driver"
@@ -116,6 +222,16 @@
To compile this driver as a module, choose M here: the
module will be called ad7923.
+config AD7949
+ tristate "Analog Devices AD7949 and similar ADCs driver"
+ depends on SPI
+ help
+ Say yes here to build support for Analog Devices
+ AD7949, AD7682, AD7689 8 Channel ADCs.
+
+ To compile this driver as a module, choose M here: the
+ module will be called ad7949.
+
config AD799X
tristate "Analog Devices AD799x ADC driver"
depends on I2C
@@ -130,6 +246,43 @@
To compile this driver as a module, choose M here: the module will be
called ad799x.
+config AD9467
+ tristate "Analog Devices AD9467 High Speed ADC driver"
+ depends on SPI
+ depends on ADI_AXI_ADC
+ help
+ Say yes here to build support for Analog Devices:
+ * AD9467 16-Bit, 200 MSPS/250 MSPS Analog-to-Digital Converter
+
+ The driver requires the assistance of the AXI ADC IP core to operate,
+ since SPI is used for configuration only, while data has to be
+ streamed into memory via DMA.
+
+ To compile this driver as a module, choose M here: the module will be
+ called ad9467.
+
+config ADI_AXI_ADC
+ tristate "Analog Devices Generic AXI ADC IP core driver"
+ select IIO_BUFFER
+ select IIO_BUFFER_HW_CONSUMER
+ select IIO_BUFFER_DMAENGINE
+ depends on HAS_IOMEM
+ depends on OF
+ help
+ Say yes here to build support for Analog Devices Generic
+ AXI ADC IP core. The IP core is used for interfacing with
+ analog-to-digital (ADC) converters that require either a high-speed
+ serial interface (JESD204B/C) or a source synchronous parallel
+ interface (LVDS/CMOS).
+ Typically (for such devices) SPI will be used for configuration only,
+ while this IP core handles the streaming of data into memory via DMA.
+
+ Link: https://wiki.analog.com/resources/fpga/docs/axi_adc_ip
+ If unsure, say N (but it's safe to say "Y").
+
+ To compile this driver as a module, choose M here: the
+ module will be called adi-axi-adc.
+
config ASPEED_ADC
tristate "Aspeed ADC"
depends on ARCH_ASPEED || COMPILE_TEST
@@ -143,8 +296,8 @@
config AT91_ADC
tristate "Atmel AT91 ADC"
- depends on ARCH_AT91
- depends on INPUT && SYSFS
+ depends on ARCH_AT91 || COMPILE_TEST
+ depends on INPUT && SYSFS && OF
select IIO_BUFFER
select IIO_TRIGGERED_BUFFER
help
@@ -189,7 +342,7 @@
config BCM_IPROC_ADC
tristate "Broadcom IPROC ADC driver"
- depends on ARCH_BCM_IPROC || COMPILE_TEST
+ depends on (ARCH_BCM_IPROC && OF) || COMPILE_TEST
depends on MFD_SYSCON
default ARCH_BCM_CYGNUS
help
@@ -274,7 +427,7 @@
config EXYNOS_ADC
tristate "Exynos ADC driver support"
- depends on ARCH_EXYNOS || ARCH_S3C24XX || ARCH_S3C64XX || (OF && COMPILE_TEST)
+ depends on ARCH_EXYNOS || ARCH_S3C24XX || ARCH_S3C64XX || ARCH_S5PV210 || (OF && COMPILE_TEST)
depends on HAS_IOMEM
help
Core support for the ADC block found in the Samsung EXYNOS series
@@ -326,7 +479,7 @@
This driver uses two GPIOs, one acts as the clock and controls the
channel selection and gain, the other one is used for the measurement
- data
+ data
Currently the raw value is read from the chip and delivered.
To get an actual weight one needs to subtract the
@@ -345,6 +498,27 @@
help
Say yes here to build support for TI INA2xx family of Power Monitors.
This driver is mutually exclusive with the HWMON version.
+
+config INGENIC_ADC
+ tristate "Ingenic JZ47xx SoCs ADC driver"
+ depends on MIPS || COMPILE_TEST
+ select IIO_BUFFER
+ help
+ Say yes here to build support for the Ingenic JZ47xx SoCs ADC unit.
+
+ This driver can also be built as a module. If so, the module will be
+ called ingenic_adc.
+
+config INTEL_MRFLD_ADC
+ tristate "Intel Merrifield Basin Cove ADC driver"
+ depends on INTEL_SOC_PMIC_MRFLD
+ help
+ Say yes here to have support for Basin Cove power management IC (PMIC) ADC
+ device. Depending on platform configuration, this general purpose ADC can
+ be used for sampling sensors such as thermal resistors.
+
+ To compile this driver as a module, choose M here: the module will be
+ called intel_mrfld_adc.
config IMX7D_ADC
tristate "Freescale IMX7D ADC driver"
@@ -406,6 +580,16 @@
To compile this driver as a module, choose M here: the module will be
called ltc2485.
+config LTC2496
+ tristate "Linear Technology LTC2496 ADC driver"
+ depends on SPI
+ help
+ Say yes here to build support for Linear Technology LTC2496
+ 16-Bit 8-/16-Channel Delta Sigma ADC.
+
+ To compile this driver as a module, choose M here: the module will be
+ called ltc2496.
+
config LTC2497
tristate "Linear Technology LTC2497 ADC driver"
depends on I2C
@@ -422,8 +606,8 @@
select IIO_BUFFER
select IIO_TRIGGERED_BUFFER
help
- Say yes here to build support for Maxim SPI ADC models
- max1027, max1029 and max1031.
+ Say yes here to build support for Maxim SPI {10,12}-bit ADC models:
+ max1027, max1029, max1031, max1227, max1229 and max1231.
To compile this driver as a module, choose M here: the module will be
called max1027.
@@ -449,6 +633,16 @@
To compile this driver as a module, choose M here: the module will be
called max1118.
+config MAX1241
+ tristate "Maxim max1241 ADC driver"
+ depends on SPI_MASTER
+ help
+ Say yes here to build support for Maxim max1241 12-bit, single-channel
+ ADC.
+
+ To compile this driver as a module, choose M here: the module will be
+ called max1241.
+
config MAX1363
tristate "Maxim max1363 ADC driver"
depends on I2C
@@ -468,7 +662,7 @@
To compile this driver as a module, choose M here: the module will be
called max1363.
-config MAX9611
+config MAX9611
tristate "Maxim max9611/max9612 ADC driver"
depends on I2C
help
@@ -501,18 +695,28 @@
This driver can also be built as a module. If so, the module will be
called mcp3422.
+config MCP3911
+ tristate "Microchip Technology MCP3911 driver"
+ depends on SPI
+ help
+ Say yes here to build support for Microchip Technology's MCP3911
+ analog to digital converter.
+
+ This driver can also be built as a module. If so, the module will be
+ called mcp3911.
+
config MEDIATEK_MT6577_AUXADC
- tristate "MediaTek AUXADC driver"
- depends on ARCH_MEDIATEK || COMPILE_TEST
- depends on HAS_IOMEM
- help
- Say yes here to enable support for MediaTek mt65xx AUXADC.
+ tristate "MediaTek AUXADC driver"
+ depends on ARCH_MEDIATEK || COMPILE_TEST
+ depends on HAS_IOMEM
+ help
+ Say yes here to enable support for MediaTek mt65xx AUXADC.
- The driver supports immediate mode operation to read from one of sixteen
- channels (external or internal).
+ The driver supports immediate mode operation to read from one of sixteen
+ channels (external or internal).
- This driver can also be built as a module. If so, the module will be
- called mt6577_auxadc.
+ This driver can also be built as a module. If so, the module will be
+ called mt6577_auxadc.
config MEN_Z188_ADC
tristate "MEN 16z188 ADC IP Core support"
@@ -536,6 +740,16 @@
To compile this driver as a module, choose M here: the
module will be called meson_saradc.
+config MP2629_ADC
+ tristate "Monolithic MP2629 ADC driver"
+ depends on MFD_MP2629
+ help
+ Say yes to have support for battery charger IC MP2629 ADC device
+ accessed over I2C.
+
+ This driver provides ADC conversion of system, input power supply
+ and battery voltage & current information.
+
config NAU7802
tristate "Nuvoton NAU7802 ADC driver"
depends on I2C
@@ -544,6 +758,16 @@
To compile this driver as a module, choose M here: the
module will be called nau7802.
+
+config NPCM_ADC
+ tristate "Nuvoton NPCM ADC driver"
+ depends on ARCH_NPCM || COMPILE_TEST
+ depends on HAS_IOMEM
+ help
+ Say yes here to build support for Nuvoton NPCM ADC.
+
+ This driver can also be built as a module. If so, the module
+ will be called npcm_adc.
config PALMAS_GPADC
tristate "TI Palmas General Purpose ADC"
@@ -596,6 +820,26 @@
To compile this driver as a module, choose M here: the module will
be called qcom-spmi-vadc.
+config QCOM_SPMI_ADC5
+ tristate "Qualcomm Technologies Inc. SPMI PMIC5 ADC"
+ depends on SPMI
+ select REGMAP_SPMI
+ select QCOM_VADC_COMMON
+ help
+ This is the IIO Voltage PMIC5 ADC driver for Qualcomm Technologies Inc.
+
+ The driver supports multiple channels read. The ADC is a 16-bit
+ sigma-delta ADC. The hardware supports calibrated results for
+ conversion requests and clients include reading voltage phone
+ power, on board system thermistors connected to the PMIC ADC,
+ PMIC die temperature, charger temperature, battery current, USB voltage
+ input, voltage signals connected to supported PMIC GPIO inputs. The
+ hardware supports internal pull-up for thermistors and can choose between
+ a 100k, 30k and 400k pull up using the ADC channels.
+
+ To compile this driver as a module, choose M here: the module will
+ be called qcom-spmi-adc5.
+
config RCAR_GYRO_ADC
tristate "Renesas R-Car GyroADC driver"
depends on ARCH_RCAR_GEN2 || COMPILE_TEST
@@ -609,9 +853,19 @@
To compile this driver as a module, choose M here: the
module will be called rcar-gyroadc.
+config RN5T618_ADC
+ tristate "ADC for the RN5T618/RC5T619 family of chips"
+ depends on MFD_RN5T618
+ help
+ Say yes here to build support for the integrated ADC inside the
+ RN5T618/619 series PMICs:
+
+ This driver can also be built as a module. If so, the module
+ will be called rn5t618-adc.
+
config ROCKCHIP_SARADC
tristate "Rockchip SARADC driver"
- depends on ARCH_ROCKCHIP || (ARM && COMPILE_TEST)
+ depends on ARCH_ROCKCHIP || COMPILE_TEST
depends on RESET_CONTROLLER
select IIO_BUFFER
select IIO_TRIGGERED_BUFFER
@@ -708,12 +962,20 @@
select REGMAP_MMIO
select IIO_BUFFER
select IIO_BUFFER_HW_CONSUMER
+ select IIO_TRIGGERED_BUFFER
help
Select this option to support ADCSigma delta modulator for
STMicroelectronics STM32 digital filter for sigma delta converter.
This driver can also be built as a module. If so, the module
will be called stm32-dfsdm-adc.
+
+config STMPE_ADC
+ tristate "STMicroelectronics STMPE ADC driver"
+ depends on OF && MFD_STMPE
+ help
+ Say yes here to build support for ST Microelectronics STMPE
+ built-in ADC block (stmpe811).
config STX104
tristate "Apex Embedded Systems STX104 driver"
@@ -834,7 +1096,7 @@
config TI_ADS1015
tristate "Texas Instruments ADS1015 ADC"
- depends on I2C && !SENSORS_ADS1015
+ depends on I2C
select REGMAP_I2C
select IIO_BUFFER
select IIO_TRIGGERED_BUFFER
@@ -847,7 +1109,7 @@
config TI_ADS7950
tristate "Texas Instruments ADS7950 ADC driver"
- depends on SPI
+ depends on SPI && GPIOLIB
select IIO_BUFFER
select IIO_TRIGGERED_BUFFER
help
@@ -858,6 +1120,16 @@
To compile this driver as a module, choose M here: the
module will be called ti-ads7950.
+config TI_ADS8344
+ tristate "Texas Instruments ADS8344"
+ depends on SPI && OF
+ help
+ If you say yes here you get support for Texas Instruments ADS8344
+ ADC chips
+
+ This driver can also be built as a module. If so, the module will be
+ called ti-ads8344.
+
config TI_ADS8688
tristate "Texas Instruments ADS8688"
depends on SPI && OF
@@ -867,6 +1139,16 @@
This driver can also be built as a module. If so, the module will be
called ti-ads8688.
+
+config TI_ADS124S08
+ tristate "Texas Instruments ADS124S08"
+ depends on SPI && OF
+ help
+ If you say yes here you get support for Texas Instruments ADS124S08
+ and ADS124S06 ADC chips
+
+ This driver can also be built as a module. If so, the module will be
+ called ti-ads124s08.
config TI_AM335X_ADC
tristate "TI's AM335X ADC driver"
@@ -941,7 +1223,6 @@
config XILINX_XADC
tristate "Xilinx XADC driver"
- depends on ARCH_ZYNQ || MICROBLAZE || COMPILE_TEST
depends on HAS_IOMEM
select IIO_BUFFER
select IIO_TRIGGERED_BUFFER
--
Gitblit v1.6.2