From 071106ecf68c401173c58808b1cf5f68cc50d390 Mon Sep 17 00:00:00 2001
From: hc <hc@nodka.com>
Date: Fri, 05 Jan 2024 08:39:27 +0000
Subject: [PATCH] change wifi driver to cypress
---
kernel/arch/mips/include/asm/barrier.h | 187 ++++++++++++----------------------------------
1 files changed, 51 insertions(+), 136 deletions(-)
diff --git a/kernel/arch/mips/include/asm/barrier.h b/kernel/arch/mips/include/asm/barrier.h
index a5eb1bb..49ff172 100644
--- a/kernel/arch/mips/include/asm/barrier.h
+++ b/kernel/arch/mips/include/asm/barrier.h
@@ -9,117 +9,26 @@
#define __ASM_BARRIER_H
#include <asm/addrspace.h>
+#include <asm/sync.h>
-/*
- * Sync types defined by the MIPS architecture (document MD00087 table 6.5)
- * These values are used with the sync instruction to perform memory barriers.
- * Types of ordering guarantees available through the SYNC instruction:
- * - Completion Barriers
- * - Ordering Barriers
- * As compared to the completion barrier, the ordering barrier is a
- * lighter-weight operation as it does not require the specified instructions
- * before the SYNC to be already completed. Instead it only requires that those
- * specified instructions which are subsequent to the SYNC in the instruction
- * stream are never re-ordered for processing ahead of the specified
- * instructions which are before the SYNC in the instruction stream.
- * This potentially reduces how many cycles the barrier instruction must stall
- * before it completes.
- * Implementations that do not use any of the non-zero values of stype to define
- * different barriers, such as ordering barriers, must make those stype values
- * act the same as stype zero.
- */
+static inline void __sync(void)
+{
+ asm volatile(__SYNC(full, always) ::: "memory");
+}
-/*
- * Completion barriers:
- * - Every synchronizable specified memory instruction (loads or stores or both)
- * that occurs in the instruction stream before the SYNC instruction must be
- * already globally performed before any synchronizable specified memory
- * instructions that occur after the SYNC are allowed to be performed, with
- * respect to any other processor or coherent I/O module.
- *
- * - The barrier does not guarantee the order in which instruction fetches are
- * performed.
- *
- * - A stype value of zero will always be defined such that it performs the most
- * complete set of synchronization operations that are defined.This means
- * stype zero always does a completion barrier that affects both loads and
- * stores preceding the SYNC instruction and both loads and stores that are
- * subsequent to the SYNC instruction. Non-zero values of stype may be defined
- * by the architecture or specific implementations to perform synchronization
- * behaviors that are less complete than that of stype zero. If an
- * implementation does not use one of these non-zero values to define a
- * different synchronization behavior, then that non-zero value of stype must
- * act the same as stype zero completion barrier. This allows software written
- * for an implementation with a lighter-weight barrier to work on another
- * implementation which only implements the stype zero completion barrier.
- *
- * - A completion barrier is required, potentially in conjunction with SSNOP (in
- * Release 1 of the Architecture) or EHB (in Release 2 of the Architecture),
- * to guarantee that memory reference results are visible across operating
- * mode changes. For example, a completion barrier is required on some
- * implementations on entry to and exit from Debug Mode to guarantee that
- * memory effects are handled correctly.
- */
+static inline void rmb(void)
+{
+ asm volatile(__SYNC(rmb, always) ::: "memory");
+}
+#define rmb rmb
-/*
- * stype 0 - A completion barrier that affects preceding loads and stores and
- * subsequent loads and stores.
- * Older instructions which must reach the load/store ordering point before the
- * SYNC instruction completes: Loads, Stores
- * Younger instructions which must reach the load/store ordering point only
- * after the SYNC instruction completes: Loads, Stores
- * Older instructions which must be globally performed when the SYNC instruction
- * completes: Loads, Stores
- */
-#define STYPE_SYNC 0x0
+static inline void wmb(void)
+{
+ asm volatile(__SYNC(wmb, always) ::: "memory");
+}
+#define wmb wmb
-/*
- * Ordering barriers:
- * - Every synchronizable specified memory instruction (loads or stores or both)
- * that occurs in the instruction stream before the SYNC instruction must
- * reach a stage in the load/store datapath after which no instruction
- * re-ordering is possible before any synchronizable specified memory
- * instruction which occurs after the SYNC instruction in the instruction
- * stream reaches the same stage in the load/store datapath.
- *
- * - If any memory instruction before the SYNC instruction in program order,
- * generates a memory request to the external memory and any memory
- * instruction after the SYNC instruction in program order also generates a
- * memory request to external memory, the memory request belonging to the
- * older instruction must be globally performed before the time the memory
- * request belonging to the younger instruction is globally performed.
- *
- * - The barrier does not guarantee the order in which instruction fetches are
- * performed.
- */
-
-/*
- * stype 0x10 - An ordering barrier that affects preceding loads and stores and
- * subsequent loads and stores.
- * Older instructions which must reach the load/store ordering point before the
- * SYNC instruction completes: Loads, Stores
- * Younger instructions which must reach the load/store ordering point only
- * after the SYNC instruction completes: Loads, Stores
- * Older instructions which must be globally performed when the SYNC instruction
- * completes: N/A
- */
-#define STYPE_SYNC_MB 0x10
-
-
-#ifdef CONFIG_CPU_HAS_SYNC
-#define __sync() \
- __asm__ __volatile__( \
- ".set push\n\t" \
- ".set noreorder\n\t" \
- ".set mips2\n\t" \
- "sync\n\t" \
- ".set pop" \
- : /* no output */ \
- : /* no input */ \
- : "memory")
-#else
-#define __sync() do { } while(0)
-#endif
+#define fast_mb() __sync()
#define __fast_iob() \
__asm__ __volatile__( \
@@ -132,17 +41,8 @@
: "m" (*(int *)CKSEG1) \
: "memory")
#ifdef CONFIG_CPU_CAVIUM_OCTEON
-# define OCTEON_SYNCW_STR ".set push\n.set arch=octeon\nsyncw\nsyncw\n.set pop\n"
-# define __syncw() __asm__ __volatile__(OCTEON_SYNCW_STR : : : "memory")
-
-# define fast_wmb() __syncw()
-# define fast_rmb() barrier()
-# define fast_mb() __sync()
# define fast_iob() do { } while (0)
#else /* ! CONFIG_CPU_CAVIUM_OCTEON */
-# define fast_wmb() __sync()
-# define fast_rmb() __sync()
-# define fast_mb() __sync()
# ifdef CONFIG_SGI_IP28
# define fast_iob() \
__asm__ __volatile__( \
@@ -178,32 +78,32 @@
#endif /* !CONFIG_CPU_HAS_WB */
-#define wmb() fast_wmb()
-#define rmb() fast_rmb()
-
#if defined(CONFIG_WEAK_ORDERING)
-# ifdef CONFIG_CPU_CAVIUM_OCTEON
-# define __smp_mb() __sync()
-# define __smp_rmb() barrier()
-# define __smp_wmb() __syncw()
-# else
-# define __smp_mb() __asm__ __volatile__("sync" : : :"memory")
-# define __smp_rmb() __asm__ __volatile__("sync" : : :"memory")
-# define __smp_wmb() __asm__ __volatile__("sync" : : :"memory")
-# endif
+# define __smp_mb() __sync()
+# define __smp_rmb() rmb()
+# define __smp_wmb() wmb()
#else
-#define __smp_mb() barrier()
-#define __smp_rmb() barrier()
-#define __smp_wmb() barrier()
+# define __smp_mb() barrier()
+# define __smp_rmb() barrier()
+# define __smp_wmb() barrier()
#endif
+/*
+ * When LL/SC does imply order, it must also be a compiler barrier to avoid the
+ * compiler from reordering where the CPU will not. When it does not imply
+ * order, the compiler is also free to reorder across the LL/SC loop and
+ * ordering will be done by smp_llsc_mb() and friends.
+ */
#if defined(CONFIG_WEAK_REORDERING_BEYOND_LLSC) && defined(CONFIG_SMP)
-#define __WEAK_LLSC_MB " sync \n"
+# define __WEAK_LLSC_MB sync
+# define smp_llsc_mb() \
+ __asm__ __volatile__(__stringify(__WEAK_LLSC_MB) : : :"memory")
+# define __LLSC_CLOBBER
#else
-#define __WEAK_LLSC_MB " \n"
+# define __WEAK_LLSC_MB
+# define smp_llsc_mb() do { } while (0)
+# define __LLSC_CLOBBER "memory"
#endif
-
-#define smp_llsc_mb() __asm__ __volatile__(__WEAK_LLSC_MB : : :"memory")
#ifdef CONFIG_CPU_CAVIUM_OCTEON
#define smp_mb__before_llsc() smp_wmb()
@@ -219,9 +119,24 @@
#define nudge_writes() mb()
#endif
-#define __smp_mb__before_atomic() __smp_mb__before_llsc()
+/*
+ * In the Loongson3 LL/SC workaround case, all of our LL/SC loops already have
+ * a completion barrier immediately preceding the LL instruction. Therefore we
+ * can skip emitting a barrier from __smp_mb__before_atomic().
+ */
+#ifdef CONFIG_CPU_LOONGSON3_WORKAROUNDS
+# define __smp_mb__before_atomic()
+#else
+# define __smp_mb__before_atomic() __smp_mb__before_llsc()
+#endif
+
#define __smp_mb__after_atomic() smp_llsc_mb()
+static inline void sync_ginv(void)
+{
+ asm volatile(__SYNC(ginv, always));
+}
+
#include <asm-generic/barrier.h>
#endif /* __ASM_BARRIER_H */
--
Gitblit v1.6.2