From 071106ecf68c401173c58808b1cf5f68cc50d390 Mon Sep 17 00:00:00 2001
From: hc <hc@nodka.com>
Date: Fri, 05 Jan 2024 08:39:27 +0000
Subject: [PATCH] change wifi driver to cypress
---
kernel/arch/arm64/boot/dts/rockchip/rk3568-evb1-ddr4-v10.dtsi | 157 +++++-----------------------------------------------
1 files changed, 16 insertions(+), 141 deletions(-)
diff --git a/kernel/arch/arm64/boot/dts/rockchip/rk3568-evb1-ddr4-v10.dtsi b/kernel/arch/arm64/boot/dts/rockchip/rk3568-evb1-ddr4-v10.dtsi
index f45ce09..dc9ad42 100644
--- a/kernel/arch/arm64/boot/dts/rockchip/rk3568-evb1-ddr4-v10.dtsi
+++ b/kernel/arch/arm64/boot/dts/rockchip/rk3568-evb1-ddr4-v10.dtsi
@@ -75,7 +75,7 @@
regulator-max-microvolt = <3300000>;
vin-supply = <&vcc5v0_sys>;
};
-#if 0
+
vcc_camera: vcc-camera-regulator {
compatible = "regulator-fixed";
gpio = <&gpio0 RK_PC1 GPIO_ACTIVE_HIGH>;
@@ -86,106 +86,6 @@
regulator-always-on;
regulator-boot-on;
};
-#endif
-
- ndj_io_init {
- compatible = "nk_io_control";
- pinctrl-names = "default";
- pinctrl-0 = <&nk_io_gpio>;
-
- //gpio_op0 = <&gpio1 RK_PD0 GPIO_ACTIVE_HIGH>;
-
- vcc_5v {
- gpio_num = <&gpio1 RK_PA4 GPIO_ACTIVE_HIGH>; //VCC5_IO_EN_GPIO1_A4_3V3
- gpio_function = <0>;
- };
-
- vcc_12v {
- gpio_num = <&gpio0 RK_PC7 GPIO_ACTIVE_HIGH>; //VCC12_IO_EN_GPIO0_C7_3V3
- gpio_function = <0>;
- };
-
- hub_host2_rst {
- gpio_num = <&gpio4 RK_PD2 GPIO_ACTIVE_HIGH>; //HUB_RST_GPIO4_D2_3V3
- gpio_function = <3>;
- };
-
- hub_host3 {
- gpio_num = <&gpio4 RK_PB2 GPIO_ACTIVE_HIGH>; //HOST3_EN_GPIO4_B2_1V8
- gpio_function = <0>;
- };
-
- wake_4g {
- gpio_num = <&gpio1 RK_PB1 GPIO_ACTIVE_LOW>; //4G_WAKEUP_GPIO01_B1_3V3
- gpio_function = <0>;
- };
-
- air_mode_4g {
- gpio_num = <&gpio1 RK_PB0 GPIO_ACTIVE_LOW>; //4G_AIR_MODE_GPIO01_B0_3V3
- gpio_function = <0>;
- };
-
- reset_4g {
- gpio_num = <&gpio1 RK_PB2 GPIO_ACTIVE_LOW>; //4G_RST_GPIO01_B2_3V3
- gpio_function = <3>;
- };
-
- en_4g {
- gpio_num = <&gpio0 RK_PC6 GPIO_ACTIVE_HIGH>; //4G_PWREN_H_GPIO0_C6
- gpio_function = <0>;
- };
-
- hp_en {
- gpio_num = <&gpio3 RK_PA6 GPIO_ACTIVE_HIGH>;//HP_EN_GPIO3_A6_3V3
- gpio_function = <0>;
- };
-
- wifi_power_en {
- gpio_num = <&gpio3 RK_PC6 GPIO_ACTIVE_HIGH>; //WIFI_PWREN_GPIO3_C6_1V8
- gpio_function = <0>;
- };
- #if 0
- do1 {
- gpio_num = <&gpio1 RK_PD0 GPIO_ACTIVE_LOW>;
- gpio_function = <0>;
- };
-
- do2 {
- gpio_num = <&gpio1 RK_PD2 GPIO_ACTIVE_HIGH>;
- gpio_function = <0>;
- };
-
- do3 {
- gpio_num = <&gpio1 RK_PD1 GPIO_ACTIVE_HIGH>;
- gpio_function = <0>;
- };
-
- do4 {
- gpio_num = <&gpio1 RK_PD3 GPIO_ACTIVE_HIGH>;
- gpio_function = <0>;
- };
-
- do5 {
- gpio_num = <&gpio2 RK_PD6 GPIO_ACTIVE_LOW>;
- gpio_function = <0>;
- };
-
- do6 {
- gpio_num = <&gpio2 RK_PD7 GPIO_ACTIVE_LOW>;
- gpio_function = <0>;
- };
-
- do7 {
- gpio_num = <&gpio3 RK_PA0 GPIO_ACTIVE_LOW>;
- gpio_function = <0>;
- };
-
- di1 {
- gpio_num = <&gpio2 RK_PD5 GPIO_ACTIVE_HIGH>;
- gpio_function = <1>;
- };
- #endif
-};
};
&combphy0_us {
@@ -201,11 +101,11 @@
};
&csi2_dphy_hw {
- status = "disabled";
+ status = "okay";
};
&csi2_dphy0 {
- status = "disabled";
+ status = "okay";
ports {
#address-cells = <1>;
@@ -249,7 +149,7 @@
* when dsi0 is enabled
*/
&dsi0 {
- status = "disabled";
+ status = "okay";
};
&dsi0_in_vp0 {
@@ -257,7 +157,7 @@
};
&dsi0_in_vp1 {
- status = "disabled";
+ status = "okay";
};
&dsi0_panel {
@@ -325,14 +225,14 @@
rx_delay = <0x2f>;
phy-handle = <&rgmii_phy0>;
- status = "disabled";
+ status = "okay";
};
&gmac1 {
phy-mode = "rgmii";
clock_in_out = "output";
- snps,reset-gpio = <&gpio3 RK_PB0 GPIO_ACTIVE_LOW>;
+ snps,reset-gpio = <&gpio2 RK_PD1 GPIO_ACTIVE_LOW>;
snps,reset-active-low;
/* Reset time is 20ms, 100ms for rtl8211f */
snps,reset-delays-us = <0 20000 100000>;
@@ -364,7 +264,7 @@
};
&i2c4 {
- status = "disabled";
+ status = "okay";
gc8034: gc8034@37 {
compatible = "galaxycore,gc8034";
status = "okay";
@@ -373,10 +273,10 @@
clock-names = "xvclk";
pinctrl-names = "default";
pinctrl-0 = <&cif_clk>;
+ power-domains = <&power RK3568_PD_VI>;
reset-gpios = <&gpio3 RK_PB6 GPIO_ACTIVE_LOW>;
pwdn-gpios = <&gpio4 RK_PB4 GPIO_ACTIVE_LOW>;
rockchip,grf = <&grf>;
- power-domains = <&power RK3568_PD_VI>;
rockchip,camera-module-index = <0>;
rockchip,camera-module-facing = "back";
rockchip,camera-module-name = "RK-CMK-8M-2-v1";
@@ -410,7 +310,7 @@
};
};
ov5695: ov5695@36 {
- status = "disabled";
+ status = "okay";
compatible = "ovti,ov5695";
reg = <0x36>;
clocks = <&cru CLK_CIF_OUT>;
@@ -448,7 +348,7 @@
};
&video_phy0 {
- status = "disabled";
+ status = "okay";
};
&video_phy1 {
@@ -490,32 +390,6 @@
rockchip,pins = <2 RK_PB1 RK_FUNC_GPIO &pcfg_pull_none>;
};
};
-
- nk_io_init{
- nk_io_gpio: nk-io-gpio{
- rockchip,pins = <0 RK_PB0 RK_FUNC_GPIO &pcfg_pull_none>,
- <0 RK_PB7 RK_FUNC_GPIO &pcfg_pull_none>,
- <0 RK_PC4 RK_FUNC_GPIO &pcfg_pull_none>,
- <4 RK_PD2 RK_FUNC_GPIO &pcfg_pull_none>,
- <4 RK_PB2 RK_FUNC_GPIO &pcfg_pull_none>,
- <1 RK_PA4 RK_FUNC_GPIO &pcfg_pull_none>,
- <0 RK_PC7 RK_FUNC_GPIO &pcfg_pull_none>,
- <1 RK_PB2 RK_FUNC_GPIO &pcfg_pull_none>,
- <1 RK_PB0 RK_FUNC_GPIO &pcfg_pull_none>,
- <1 RK_PB1 RK_FUNC_GPIO &pcfg_pull_none>,
- <3 RK_PA6 RK_FUNC_GPIO &pcfg_pull_none>,
- <3 RK_PD2 RK_FUNC_GPIO &pcfg_pull_none>,
- <3 RK_PD3 RK_FUNC_GPIO &pcfg_pull_none>,
- <3 RK_PD4 RK_FUNC_GPIO &pcfg_pull_none>,
- <3 RK_PD5 RK_FUNC_GPIO &pcfg_pull_none>,
- <3 RK_PD1 RK_FUNC_GPIO &pcfg_pull_none>,
- <2 RK_PD5 RK_FUNC_GPIO &pcfg_pull_none>,//93 SPI2_CS0_M1_3V3
- <2 RK_PD6 RK_FUNC_GPIO &pcfg_pull_none>,//94 SPI2_MOSI_M1_3V3
- <2 RK_PD7 RK_FUNC_GPIO &pcfg_pull_none>,//95 SPI2_MISO_M1_3V3
- <3 RK_PA0 RK_FUNC_GPIO &pcfg_pull_none>,//96 SPI2_CLK_M1_3V3
- <0 RK_PC6 RK_FUNC_GPIO &pcfg_pull_none>;
- };
- };
};
&rk809_sound {
@@ -523,11 +397,11 @@
};
&rkisp {
- status = "disabled";
+ status = "okay";
};
&rkisp_mmu {
- status = "disabled";
+ status = "okay";
};
&rkisp_vir0 {
@@ -545,7 +419,7 @@
};
&route_dsi0 {
- status = "disabled";
+ status = "okay";
connect = <&vp1_out_dsi0>;
};
@@ -560,7 +434,8 @@
&sdmmc2 {
max-frequency = <150000000>;
- supports-sdio;
+ no-sd;
+ no-mmc;
bus-width = <4>;
disable-wp;
cap-sd-highspeed;
--
Gitblit v1.6.2