From 071106ecf68c401173c58808b1cf5f68cc50d390 Mon Sep 17 00:00:00 2001
From: hc <hc@nodka.com>
Date: Fri, 05 Jan 2024 08:39:27 +0000
Subject: [PATCH] change wifi driver to cypress
---
kernel/arch/arm64/boot/dts/rockchip/rk3568-evb1-ddr4-v10.dtsi | 469 ++++++++--------------------------------------------------
1 files changed, 66 insertions(+), 403 deletions(-)
diff --git a/kernel/arch/arm64/boot/dts/rockchip/rk3568-evb1-ddr4-v10.dtsi b/kernel/arch/arm64/boot/dts/rockchip/rk3568-evb1-ddr4-v10.dtsi
index fb8880f..dc9ad42 100644
--- a/kernel/arch/arm64/boot/dts/rockchip/rk3568-evb1-ddr4-v10.dtsi
+++ b/kernel/arch/arm64/boot/dts/rockchip/rk3568-evb1-ddr4-v10.dtsi
@@ -8,21 +8,12 @@
#include <dt-bindings/gpio/gpio.h>
#include <dt-bindings/pinctrl/rockchip.h>
-#include <dt-bindings/display/media-bus-format.h>
#include "rk3568.dtsi"
#include "rk3568-evb.dtsi"
/ {
model = "Rockchip RK3568 EVB1 DDR4 V10 Board";
compatible = "rockchip,rk3568-evb1-ddr4-v10", "rockchip,rk3568";
-
- rk_headset: rk-headset {
- compatible = "rockchip_headset";
- headset_gpio = <&gpio0 RK_PD5 GPIO_ACTIVE_LOW>;
- spk_ctl_gpio = <&gpio4 RK_PC2 GPIO_ACTIVE_LOW>;//AMP_SD_GPIO4_C2_3V3
- pinctrl-names = "default";
- pinctrl-0 = <&hp_det>;
- };
vcc2v5_sys: vcc2v5-ddr {
compatible = "regulator-fixed";
@@ -84,7 +75,7 @@
regulator-max-microvolt = <3300000>;
vin-supply = <&vcc5v0_sys>;
};
-#if 0
+
vcc_camera: vcc-camera-regulator {
compatible = "regulator-fixed";
gpio = <&gpio0 RK_PC1 GPIO_ACTIVE_HIGH>;
@@ -94,174 +85,7 @@
enable-active-high;
regulator-always-on;
regulator-boot-on;
- };
-#endif
- ndj_io_init {
- compatible = "nk_io_control";
- pinctrl-names = "default";
- pinctrl-0 = <&nk_io_gpio>;
-
- //gpio_op0 = <&gpio1 RK_PD0 GPIO_ACTIVE_HIGH>;
-
- vcc_5v {
- gpio_num = <&gpio1 RK_PA4 GPIO_ACTIVE_HIGH>; //VCC5_IO_EN_GPIO1_A4_3V3
- gpio_function = <0>;
- };
-
- vcc_12v {
- gpio_num = <&gpio0 RK_PC7 GPIO_ACTIVE_HIGH>; //VCC12_IO_EN_GPIO0_C7_3V3
- gpio_function = <0>;
- };
-
- hub_host2_rst {
- gpio_num = <&gpio4 RK_PD2 GPIO_ACTIVE_HIGH>; //HUB_RST_GPIO4_D2_3V3
- gpio_function = <3>;
- };
-
- hub_host3 {
- gpio_num = <&gpio4 RK_PB2 GPIO_ACTIVE_HIGH>; //HOST3_EN_GPIO4_B2_1V8
- gpio_function = <0>;
- };
-
- wake_4g {
- gpio_num = <&gpio1 RK_PB1 GPIO_ACTIVE_LOW>; //4G_WAKEUP_GPIO01_B1_3V3
- gpio_function = <0>;
- };
-
- air_mode_4g {
- gpio_num = <&gpio1 RK_PB0 GPIO_ACTIVE_LOW>; //4G_AIR_MODE_GPIO01_B0_3V3
- gpio_function = <0>;
- };
-
- reset_4g {
- gpio_num = <&gpio1 RK_PB2 GPIO_ACTIVE_LOW>; //4G_RST_GPIO01_B2_3V3
- gpio_function = <3>;
- };
-
- en_4g {
- gpio_num = <&gpio0 RK_PC6 GPIO_ACTIVE_HIGH>; //4G_PWREN_H_GPIO0_C6
- gpio_function = <0>;
- };
-
- hp_en {
- gpio_num = <&gpio3 RK_PA6 GPIO_ACTIVE_HIGH>;//HP_EN_GPIO3_A6_3V3
- gpio_function = <0>;
- };
-
- usb_ogt {
- gpio_num = <&gpio0 RK_PC2 GPIO_ACTIVE_HIGH>; //OTG_EN_OC_GPIO0_C2
- gpio_function = <0>;
- };
-
- m2_wifi_pwr {
- gpio_num = <&gpio3 RK_PC6 GPIO_ACTIVE_HIGH>;//WIFI_PWREN_GPIO3_C6_1V8
- gpio_function = <0>;
- };
-
-
- #if 0
- do1 {
- gpio_num = <&gpio1 RK_PD0 GPIO_ACTIVE_LOW>;
- gpio_function = <0>;
- };
-
- do2 {
- gpio_num = <&gpio1 RK_PD2 GPIO_ACTIVE_HIGH>;
- gpio_function = <0>;
- };
-
- do3 {
- gpio_num = <&gpio1 RK_PD1 GPIO_ACTIVE_HIGH>;
- gpio_function = <0>;
- };
-
- do4 {
- gpio_num = <&gpio1 RK_PD3 GPIO_ACTIVE_HIGH>;
- gpio_function = <0>;
- };
-
- do5 {
- gpio_num = <&gpio2 RK_PD6 GPIO_ACTIVE_LOW>;
- gpio_function = <0>;
- };
-
- do6 {
- gpio_num = <&gpio2 RK_PD7 GPIO_ACTIVE_LOW>;
- gpio_function = <0>;
- };
-
- do7 {
- gpio_num = <&gpio3 RK_PA0 GPIO_ACTIVE_LOW>;
- gpio_function = <0>;
- };
-
- di1 {
- gpio_num = <&gpio2 RK_PD5 GPIO_ACTIVE_HIGH>;
- gpio_function = <1>;
- };
- #endif
- };
-#if 0
- nk_io_init {
- compatible = "nk_io_control";
-// vcc3_io_en_gpio = <&gpio0 RK_PC4 GPIO_ACTIVE_HIGH>; //VCC3_IO_EN_GPIO0_C4_3V3
- hub_host2_5V_rest_gpio = <&gpio4 RK_PD2 GPIO_ACTIVE_HIGH>; //HUB_RST_GPIO4_D2_3V3
- hub_host3_5v_gpio = <&gpio4 RK_PB2 GPIO_ACTIVE_HIGH>; //HOST3_EN_GPIO4_B2_1V8
- vcc_5v_io = <&gpio1 RK_PA4 GPIO_ACTIVE_HIGH>; //VCC5_IO_EN_GPIO1_A4_3V3
- vcc_12v_io = <&gpio0 RK_PC7 GPIO_ACTIVE_HIGH>; //VCC12_IO_EN_GPIO0_C7_3V3
- en_4g_gpio = <&gpio0 RK_PC6 GPIO_ACTIVE_HIGH>; //4G_PWREN_H_GPIO0_C6
- reset_4g_gpio = <&gpio1 RK_PB2 GPIO_ACTIVE_HIGH>; //4G_RST_GPIO01_B2_3V3
- air_mode_4g_gpio = <&gpio1 RK_PB0 GPIO_ACTIVE_HIGH>; //4G_AIR_MODE_GPIO01_B0_3V3
- wake_4g_gpio = <&gpio1 RK_PB1 GPIO_ACTIVE_HIGH>; //4G_WAKEUP_GPIO01_B1_3V3
- hp_en_gpio = <&gpio3 RK_PA6 GPIO_ACTIVE_HIGH>;//HP_EN_GPIO3_A6_3V3
-// spk_out_gpio = <&gpio4 RK_PC2 GPIO_ACTIVE_HIGH>;//AMP_SD_GPIO4_C2_3V3
- wifi_power_en_gpio = <&gpio3 RK_PC6 GPIO_ACTIVE_HIGH>; //WIFI_PWREN_GPIO3_C6_1V8
-// pcie_power_en_gpio = <&gpio0 RK_PD4 GPIO_ACTIVE_HIGH>;//PCIE_PWREN_H_GPIO0_D4
- pinctrl-names = "default";
- pinctrl-0 = <&nk_io_gpio>;
- };
-#endif
- panel: panel {
- compatible = "simple-panel";
- backlight = <&backlight>;
- power-supply = <&vcc3v3_lcd0_n>;
- enable-gpios = <&gpio2 RK_PD4 GPIO_ACTIVE_HIGH>; //LCD0_VDD_H_GPIO2_D4
- edp-bl-gpios = <&gpio0 RK_PB7 GPIO_ACTIVE_HIGH>; //LCD0_PWBLK_H_GPIO0_B7
- edp-bl-en = <&gpio0 RK_PB0 GPIO_ACTIVE_HIGH>; //LCD0_BKLT_EN_3V3
- bus-format = <MEDIA_BUS_FMT_RGB888_1X24>;
- bpc = <8>;
- prepare-delay-ms = <200>;
- enable-delay-ms = <20>;
- lvds-gpio0 = <&gpio3 RK_PD2 GPIO_ACTIVE_HIGH>; //7511_GPIO0-GPIO3_D2
- lvds-gpio1 = <&gpio3 RK_PD3 GPIO_ACTIVE_HIGH>; //7511_GPIO1-GPIO3_D3
- lvds-gpio2 = <&gpio3 RK_PD4 GPIO_ACTIVE_HIGH>; //7511_GPIO2-GPIO3_D4
- lvds-gpio3 = <&gpio3 RK_PD5 GPIO_ACTIVE_HIGH>; //7511_GPIO3-GPIO3_D5
- nodka-lvds = <15>;
-
- display-timings {
- native-mode = <&timing>;
- timing: timing {
- clock-frequency = <72500000>;
- hactive = <1280>;
- vactive = <800>;
- hfront-porch = <70>;
- hsync-len = <2>;
- hback-porch = <88>;
- vfront-porch = <7>;
- vsync-len = <4>;
- vback-porch = <17>;
- hsync-active = <21>;
- vsync-active = <0>;
- de-active = <0>;
- pixelclk-active = <0>;
- };
- };
- port {
- panel_in_lvds: endpoint {
- remote-endpoint = <&lvds_out>;
- };
- };
- };
+ };
};
&combphy0_us {
@@ -277,11 +101,11 @@
};
&csi2_dphy_hw {
- status = "disabled";
+ status = "okay";
};
&csi2_dphy0 {
- status = "disabled";
+ status = "okay";
ports {
#address-cells = <1>;
@@ -324,12 +148,8 @@
* video_phy0 needs to be enabled
* when dsi0 is enabled
*/
-&video_phy0 {
- status = "disabled";
-};
-
&dsi0 {
- status = "disabled";
+ status = "okay";
};
&dsi0_in_vp0 {
@@ -337,7 +157,7 @@
};
&dsi0_in_vp1 {
- status = "disabled";
+ status = "okay";
};
&dsi0_panel {
@@ -365,30 +185,7 @@
};
&edp {
- //hpd-gpios = <&gpio0 RK_PC2 GPIO_ACTIVE_HIGH>;
- force-hpd;
- status = "disabled";
-};
-
-&lvds {
- status = "disabled";
- ports {
- port@1 {
- reg = <1>;
- lvds_out: endpoint {
- remote-endpoint = <&panel_in_lvds>;
- };
- };
-
- };
-};
-
-&route_lvds{
- status = "disabled";
- connect = <&vp2_out_lvds>;
-};
-
-&lvds_in_vp2 {
+ hpd-gpios = <&gpio0 RK_PC2 GPIO_ACTIVE_HIGH>;
status = "okay";
};
@@ -397,65 +194,18 @@
};
&edp_in_vp0 {
- status = "disabled";
+ status = "okay";
};
&edp_in_vp1 {
- status = "okay";
-
-};
-
-&route_edp {
- status = "okay";
- connect = <&vp1_out_edp>;
-};
-
-
-/*
-* edp_end
-*/
-
-/*
-* Hdmi_start
-*/
-
-&hdmi {
- status = "okay";
- rockchip,phy-table =
- <92812500 0x8009 0x0000 0x0270>,
- <165000000 0x800b 0x0000 0x026d>,
- <185625000 0x800b 0x0000 0x01ed>,
- <297000000 0x800b 0x0000 0x01ad>,
- <594000000 0x8029 0x0000 0x0088>,
- <000000000 0x0000 0x0000 0x0000>;
-};
-
-&route_hdmi {
- status = "okay";
- connect = <&vp0_out_hdmi>;
-};
-
-&hdmi_in_vp0 {
- status = "okay";
-};
-
-&hdmi_in_vp1 {
status = "disabled";
};
-
-&hdmi_sound {
- status = "okay";
-};
-
-/*
- * Hdmi_END
-*/
&gmac0 {
phy-mode = "rgmii";
clock_in_out = "output";
- snps,reset-gpio = <&gpio2 RK_PC6 GPIO_ACTIVE_LOW>;
+ snps,reset-gpio = <&gpio2 RK_PD3 GPIO_ACTIVE_LOW>;
snps,reset-active-low;
/* Reset time is 20ms, 100ms for rtl8211f */
snps,reset-delays-us = <0 20000 100000>;
@@ -475,16 +225,14 @@
rx_delay = <0x2f>;
phy-handle = <&rgmii_phy0>;
-
- status = "disabled";
-
+ status = "okay";
};
&gmac1 {
phy-mode = "rgmii";
clock_in_out = "output";
- snps,reset-gpio = <&gpio3 RK_PB0 GPIO_ACTIVE_LOW>;
+ snps,reset-gpio = <&gpio2 RK_PD1 GPIO_ACTIVE_LOW>;
snps,reset-active-low;
/* Reset time is 20ms, 100ms for rtl8211f */
snps,reset-delays-us = <0 20000 100000>;
@@ -511,26 +259,12 @@
* power-supply should switche to vcc3v3_lcd1_n
* when mipi panel is connected to dsi1.
*/
-
-
-&i2c3 {
- status = "okay";
- //mac eeprom
- eeprom@51 {
- //compatible = "atmel,24c02";
- compatible = "atmel,24c256";
- reg = <0x51>;
- };
-
- //nk-mcu
- nkmcu@15 {
- compatible = "nk_mcu";
- reg = <0x15>;
- };
+>1x {
+ power-supply = <&vcc3v3_lcd0_n>;
};
&i2c4 {
- status = "disabled";
+ status = "okay";
gc8034: gc8034@37 {
compatible = "galaxycore,gc8034";
status = "okay";
@@ -539,6 +273,7 @@
clock-names = "xvclk";
pinctrl-names = "default";
pinctrl-0 = <&cif_clk>;
+ power-domains = <&power RK3568_PD_VI>;
reset-gpios = <&gpio3 RK_PB6 GPIO_ACTIVE_LOW>;
pwdn-gpios = <&gpio4 RK_PB4 GPIO_ACTIVE_LOW>;
rockchip,grf = <&grf>;
@@ -575,7 +310,7 @@
};
};
ov5695: ov5695@36 {
- status = "disabled";
+ status = "okay";
compatible = "ovti,ov5695";
reg = <0x36>;
clocks = <&cru CLK_CIF_OUT>;
@@ -595,19 +330,6 @@
data-lanes = <1 2>;
};
};
- };
-};
-
-&i2c5 {
- status = "okay";
-
- hym8563: hym8563@51 {
- compatible = "haoyu,hym8563";
- reg = <0x51>;
- #clock-cells = <0>;
- clock-frequency = <32768>;
- clock-output-names = "xin32k";
- /* rtc_int is not connected */
};
};
@@ -644,75 +366,46 @@
};
&pinctrl {
-// cam {
-// camera_pwr: camera-pwr {
-// rockchip,pins =
-// /* camera power en */
-// <0 RK_PC1 RK_FUNC_GPIO &pcfg_pull_none>;
-// };
-// };
+ cam {
+ camera_pwr: camera-pwr {
+ rockchip,pins =
+ /* camera power en */
+ <0 RK_PC1 RK_FUNC_GPIO &pcfg_pull_none>;
+ };
+ };
headphone {
hp_det: hp-det {
- rockchip,pins = <0 RK_PD5 RK_FUNC_GPIO &pcfg_pull_down>,
- <4 RK_PC2 RK_FUNC_GPIO &pcfg_pull_down>;
+ rockchip,pins = <3 RK_PC2 RK_FUNC_GPIO &pcfg_pull_down>;
};
};
wireless-wlan {
wifi_host_wake_irq: wifi-host-wake-irq {
- rockchip,pins = <2 RK_PB2 RK_FUNC_GPIO &pcfg_pull_down>;
+ rockchip,pins = <3 RK_PD4 RK_FUNC_GPIO &pcfg_pull_down>;
};
};
wireless-bluetooth {
- uart1_gpios: uart1-gpios {
- rockchip,pins = <2 RK_PB5 RK_FUNC_GPIO &pcfg_pull_none>;
+ uart8_gpios: uart8-gpios {
+ rockchip,pins = <2 RK_PB1 RK_FUNC_GPIO &pcfg_pull_none>;
};
};
-
- lcd1 {
- lcd1_rst_gpio: lcd1-rst-gpio {
- rockchip,pins = <3 RK_PC7 RK_FUNC_GPIO &pcfg_pull_none>;
- };
- };
-
- nk_io_init{
- nk_io_gpio: nk-io-gpio{
- rockchip,pins = <0 RK_PB0 RK_FUNC_GPIO &pcfg_pull_none>,
- <0 RK_PB7 RK_FUNC_GPIO &pcfg_pull_none>,
- <0 RK_PC4 RK_FUNC_GPIO &pcfg_pull_none>,
- <4 RK_PD2 RK_FUNC_GPIO &pcfg_pull_none>,
- <4 RK_PB2 RK_FUNC_GPIO &pcfg_pull_none>,
- <1 RK_PA4 RK_FUNC_GPIO &pcfg_pull_none>,
- <0 RK_PC7 RK_FUNC_GPIO &pcfg_pull_none>,
- <1 RK_PB2 RK_FUNC_GPIO &pcfg_pull_none>,
- <1 RK_PB0 RK_FUNC_GPIO &pcfg_pull_none>,
- <1 RK_PB1 RK_FUNC_GPIO &pcfg_pull_none>,
- <3 RK_PA6 RK_FUNC_GPIO &pcfg_pull_none>,
- <3 RK_PD2 RK_FUNC_GPIO &pcfg_pull_none>,
- <3 RK_PD3 RK_FUNC_GPIO &pcfg_pull_none>,
- <3 RK_PD4 RK_FUNC_GPIO &pcfg_pull_none>,
- <3 RK_PD5 RK_FUNC_GPIO &pcfg_pull_none>,
- <3 RK_PD1 RK_FUNC_GPIO &pcfg_pull_none>,
- <2 RK_PD5 RK_FUNC_GPIO &pcfg_pull_none>,//93 SPI2_CS0_M1_3V3
- <2 RK_PD6 RK_FUNC_GPIO &pcfg_pull_none>,//94 SPI2_MOSI_M1_3V3
- <2 RK_PD7 RK_FUNC_GPIO &pcfg_pull_none>,//95 SPI2_MISO_M1_3V3
- <3 RK_PA0 RK_FUNC_GPIO &pcfg_pull_none>,//96 SPI2_CLK_M1_3V3
- <0 RK_PC6 RK_FUNC_GPIO &pcfg_pull_none>;
- };
- };
+};
+
+&rk809_sound {
+ hp-det-gpio = <&gpio3 RK_PC2 GPIO_ACTIVE_LOW>;
};
&rkisp {
- status = "disabled";
+ status = "okay";
};
&rkisp_mmu {
- status = "disabled";
+ status = "okay";
};
&rkisp_vir0 {
- status = "disabled";
+ status = "okay";
port {
#address-cells = <1>;
@@ -725,30 +418,35 @@
};
};
+&route_dsi0 {
+ status = "okay";
+ connect = <&vp1_out_dsi0>;
+};
+&route_edp {
+ status = "okay";
+ connect = <&vp0_out_edp>;
+};
&sata2 {
status = "okay";
};
&sdmmc2 {
- status = "disabled";
-};
-
-&sdmmc1 {
- max-frequency = <150000000>;
- supports-sdio;
- bus-width = <4>;
- disable-wp;
- cap-sd-highspeed;
- cap-sdio-irq;
- keep-power-in-suspend;
- mmc-pwrseq = <&sdio_pwrseq>;
- non-removable;
- pinctrl-names = "default";
- pinctrl-0 = <&sdmmc1_bus4 &sdmmc1_cmd &sdmmc1_clk>;
- sd-uhs-sdr104;
- status = "okay";
+ max-frequency = <150000000>;
+ no-sd;
+ no-mmc;
+ bus-width = <4>;
+ disable-wp;
+ cap-sd-highspeed;
+ cap-sdio-irq;
+ keep-power-in-suspend;
+ mmc-pwrseq = <&sdio_pwrseq>;
+ non-removable;
+ pinctrl-names = "default";
+ pinctrl-0 = <&sdmmc2m0_bus4 &sdmmc2m0_cmd &sdmmc2m0_clk>;
+ sd-uhs-sdr104;
+ status = "okay";
};
&spdif_8ch {
@@ -758,25 +456,25 @@
};
&uart8 {
- status = "disabled";
+ status = "okay";
pinctrl-names = "default";
pinctrl-0 = <&uart8m0_xfer &uart8m0_ctsn>;
};
&vcc3v3_lcd0_n {
- gpio = <&gpio0 RK_PC4 GPIO_ACTIVE_HIGH>;
+ gpio = <&gpio0 RK_PC7 GPIO_ACTIVE_HIGH>;
enable-active-high;
};
&vcc3v3_lcd1_n {
- gpio = <&gpio3 RK_PA3 GPIO_ACTIVE_HIGH>; //MIPI_3V3EN_GPIO3_A3_d_3V3
+ gpio = <&gpio0 RK_PC5 GPIO_ACTIVE_HIGH>;
enable-active-high;
};
&wireless_wlan {
pinctrl-names = "default";
pinctrl-0 = <&wifi_host_wake_irq>;
- WIFI,host_wake_irq = <&gpio2 RK_PB2 GPIO_ACTIVE_HIGH>;
+ WIFI,host_wake_irq = <&gpio3 RK_PD4 GPIO_ACTIVE_HIGH>;
};
&wireless_bluetooth {
@@ -784,47 +482,12 @@
clocks = <&rk809 1>;
clock-names = "ext_clock";
//wifi-bt-power-toggle;
- uart_rts_gpios = <&gpio2 RK_PB5 GPIO_ACTIVE_LOW>;
+ uart_rts_gpios = <&gpio2 RK_PB1 GPIO_ACTIVE_LOW>;
pinctrl-names = "default", "rts_gpio";
- pinctrl-0 = <&uart1m0_rtsn>;
- pinctrl-1 = <&uart1_gpios>;
- BT,reset_gpio = <&gpio2 RK_PB7 GPIO_ACTIVE_HIGH>;
- BT,wake_gpio = <&gpio2 RK_PC0 GPIO_ACTIVE_HIGH>;
- BT,wake_host_irq = <&gpio2 RK_PC1 GPIO_ACTIVE_HIGH>;
+ pinctrl-0 = <&uart8m0_rtsn>;
+ pinctrl-1 = <&uart8_gpios>;
+ BT,reset_gpio = <&gpio3 RK_PA0 GPIO_ACTIVE_HIGH>;
+ BT,wake_gpio = <&gpio3 RK_PA2 GPIO_ACTIVE_HIGH>;
+ BT,wake_host_irq = <&gpio3 RK_PA1 GPIO_ACTIVE_HIGH>;
status = "okay";
-};
-
-&uart0 {
- status = "disabled";
-};
-
-&uart1 {
- pinctrl-names = "default";
- pinctrl-0 = <&uart1m0_xfer &uart1m0_ctsn>;
- status = "disabled";
-};
-
-&uart3 {
- status = "okay";
- pinctrl-0 = <&uart3m1_xfer>;
-};
-
-&uart4 {
- status = "okay";
- pinctrl-0 = <&uart4m1_xfer>;
-};
-
-&uart5 {
- status = "okay";
- pinctrl-0 = <&uart5m1_xfer>;
-};
-
-&uart7 {
- status = "disabled";
- pinctrl-0 = <&uart7m1_xfer>;
-};
-
-&uart9 {
- status = "disabled";
- pinctrl-0 = <&uart9m1_xfer>;
};
--
Gitblit v1.6.2