From 071106ecf68c401173c58808b1cf5f68cc50d390 Mon Sep 17 00:00:00 2001
From: hc <hc@nodka.com>
Date: Fri, 05 Jan 2024 08:39:27 +0000
Subject: [PATCH] change wifi driver to cypress
---
kernel/arch/arm64/boot/dts/rockchip/rk3399-sapphire.dtsi | 260 +++++++++++++++++++++++++++++++++++----------------
1 files changed, 176 insertions(+), 84 deletions(-)
diff --git a/kernel/arch/arm64/boot/dts/rockchip/rk3399-sapphire.dtsi b/kernel/arch/arm64/boot/dts/rockchip/rk3399-sapphire.dtsi
index c06fbbd..06040f5 100644
--- a/kernel/arch/arm64/boot/dts/rockchip/rk3399-sapphire.dtsi
+++ b/kernel/arch/arm64/boot/dts/rockchip/rk3399-sapphire.dtsi
@@ -3,6 +3,7 @@
* Copyright (c) 2017 Fuzhou Rockchip Electronics Co., Ltd.
*/
+#include "dt-bindings/usb/pd.h"
#include "dt-bindings/pwm/pwm.h"
#include "dt-bindings/input/input.h"
#include "rk3399.dtsi"
@@ -10,6 +11,10 @@
/ {
compatible = "rockchip,rk3399-sapphire", "rockchip,rk3399";
+
+ chosen {
+ stdout-path = "serial2:1500000n8";
+ };
adc_keys: adc-keys {
compatible = "adc-keys";
@@ -55,45 +60,6 @@
};
};
- backlight: backlight {
- compatible = "pwm-backlight";
- brightness-levels = <
- 0 1 2 3 4 5 6 7
- 8 9 10 11 12 13 14 15
- 16 17 18 19 20 21 22 23
- 24 25 26 27 28 29 30 31
- 32 33 34 35 36 37 38 39
- 40 41 42 43 44 45 46 47
- 48 49 50 51 52 53 54 55
- 56 57 58 59 60 61 62 63
- 64 65 66 67 68 69 70 71
- 72 73 74 75 76 77 78 79
- 80 81 82 83 84 85 86 87
- 88 89 90 91 92 93 94 95
- 96 97 98 99 100 101 102 103
- 104 105 106 107 108 109 110 111
- 112 113 114 115 116 117 118 119
- 120 121 122 123 124 125 126 127
- 128 129 130 131 132 133 134 135
- 136 137 138 139 140 141 142 143
- 144 145 146 147 148 149 150 151
- 152 153 154 155 156 157 158 159
- 160 161 162 163 164 165 166 167
- 168 169 170 171 172 173 174 175
- 176 177 178 179 180 181 182 183
- 184 185 186 187 188 189 190 191
- 192 193 194 195 196 197 198 199
- 200 201 202 203 204 205 206 207
- 208 209 210 211 212 213 214 215
- 216 217 218 219 220 221 222 223
- 224 225 226 227 228 229 230 231
- 232 233 234 235 236 237 238 239
- 240 241 242 243 244 245 246 247
- 248 249 250 251 252 253 254 255>;
- default-brightness-level = <200>;
- pwms = <&pwm0 0 25000 0>;
- };
-
clkin_gmac: external-gmac-clock {
compatible = "fixed-clock";
clock-frequency = <125000000>;
@@ -110,11 +76,33 @@
regulator-max-microvolt = <12000000>;
};
- dp_sound: dp-sound {
- status = "disabled";
- compatible = "rockchip,cdndp-sound";
- rockchip,cpu = <&spdif>;
- rockchip,codec = <&cdn_dp 1>;
+ /*
+ * The fan power supply comes from the baseboard.
+ * For the standalone Sapphire one option is to connect a wire
+ * from R90030 DNP R0805 pin2 to C90002 10uF C0805 pin1 (vcc_sys).
+ */
+ fan0: gpio-fan {
+ #cooling-cells = <2>;
+ compatible = "gpio-fan";
+ gpio-fan,speed-map = <0 0 3000 1>;
+ gpios = <&gpio1 RK_PC2 GPIO_ACTIVE_HIGH>;
+ status = "okay";
+ };
+
+ keys: gpio-keys {
+ compatible = "gpio-keys";
+ autorepeat;
+
+ power {
+ debounce-interval = <100>;
+ gpios = <&gpio0 RK_PA5 GPIO_ACTIVE_LOW>;
+ label = "GPIO Power";
+ linux,code = <KEY_POWER>;
+ linux,input-type = <1>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pwr_btn>;
+ wakeup-source;
+ };
};
/* switched by pmic_sleep */
@@ -151,16 +139,6 @@
vin-supply = <&vcc_sys>;
};
- vcc_sys: vcc-sys {
- compatible = "regulator-fixed";
- regulator-name = "vcc_sys";
- regulator-always-on;
- regulator-boot-on;
- regulator-min-microvolt = <5000000>;
- regulator-max-microvolt = <5000000>;
- vin-supply = <&dc_12v>;
- };
-
vcc5v0_host: vcc5v0-host-regulator {
compatible = "regulator-fixed";
enable-active-high;
@@ -172,13 +150,24 @@
vin-supply = <&vcc_sys>;
};
- vcc5v0_sys: vcc5v0-sys {
+ vcc5v0_typec0: vcc5v0-typec0-regulator {
compatible = "regulator-fixed";
- regulator-name = "vcc5v0_sys";
+ enable-active-high;
+ gpio = <&gpio2 RK_PA0 GPIO_ACTIVE_HIGH>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&vcc5v0_typec0_en>;
+ regulator-name = "vcc5v0_typec0";
+ vin-supply = <&vcc_sys>;
+ };
+
+ vcc_sys: vcc-sys {
+ compatible = "regulator-fixed";
+ regulator-name = "vcc_sys";
regulator-always-on;
regulator-boot-on;
regulator-min-microvolt = <5000000>;
regulator-max-microvolt = <5000000>;
+ vin-supply = <&dc_12v>;
};
vdd_log: vdd-log {
@@ -191,6 +180,11 @@
regulator-max-microvolt = <1400000>;
vin-supply = <&vcc_sys>;
};
+};
+
+&cdn_dp {
+ status = "okay";
+ phys = <&tcphy0_dp>;
};
&cpu_l0 {
@@ -215,6 +209,24 @@
&cpu_b1 {
cpu-supply = <&vdd_cpu_b>;
+};
+
+&cpu_thermal {
+ trips {
+ cpu_hot: cpu_hot {
+ hysteresis = <10000>;
+ temperature = <55000>;
+ type = "active";
+ };
+ };
+
+ cooling-maps {
+ map2 {
+ cooling-device =
+ <&fan0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
+ trip = <&cpu_hot>;
+ };
+ };
};
&emmc_phy {
@@ -264,7 +276,7 @@
#clock-cells = <1>;
clock-output-names = "xin32k", "rk808-clkout2";
pinctrl-names = "default";
- pinctrl-0 = <&pmic_int_l &pmic_dvs2>;
+ pinctrl-0 = <&pmic_int_l>;
rockchip,system-power-controller;
wakeup-source;
@@ -479,14 +491,71 @@
i2c-scl-rising-time-ns = <475>;
i2c-scl-falling-time-ns = <26>;
- fusb0: fusb30x@22 {
- compatible = "fairchild,fusb302";
+ usbc0: fusb302@22 {
+ compatible = "fcs,fusb302";
reg = <0x22>;
+ interrupt-parent = <&gpio1>;
+ interrupts = <RK_PA2 IRQ_TYPE_LEVEL_LOW>;
pinctrl-names = "default";
- pinctrl-0 = <&fusb0_int>;
- int-n-gpios = <&gpio1 2 GPIO_ACTIVE_HIGH>;
- vbus-5v-gpios = <&gpio2 0 GPIO_ACTIVE_HIGH>;
+ pinctrl-0 = <&usbc0_int>;
+ vbus-supply = <&vcc5v0_typec0>;
status = "okay";
+
+ ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ port@0 {
+ reg = <0>;
+ usbc0_role_sw: endpoint@0 {
+ remote-endpoint = <&dwc3_0_role_switch>;
+ };
+ };
+ };
+
+ usb_con: connector {
+ compatible = "usb-c-connector";
+ label = "USB-C";
+ data-role = "dual";
+ power-role = "dual";
+ try-power-role = "sink";
+ op-sink-microwatt = <1000000>;
+ sink-pdos =
+ <PDO_FIXED(5000, 1000, PDO_FIXED_USB_COMM)>;
+ source-pdos =
+ <PDO_FIXED(5000, 3000, PDO_FIXED_USB_COMM)>;
+
+ displayport = <&cdn_dp>;
+
+ altmodes {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ altmode@0 {
+ reg = <0>;
+ svid = <0xff01>;
+ vdo = <0xffffffff>;
+ };
+ };
+
+ ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ port@0 {
+ reg = <0>;
+ usbc0_orien_sw: endpoint {
+ remote-endpoint = <&tcphy0_orientation_switch>;
+ };
+ };
+ port@1 {
+ reg = <1>;
+ dp_mode_sw: endpoint {
+ remote-endpoint = <&tcphy_dp_altmode_switch>;
+ };
+ };
+ };
+ };
};
};
@@ -515,22 +584,24 @@
};
};
+ fan {
+ motor_pwr: motor-pwr {
+ rockchip,pins =
+ <1 RK_PC2 RK_FUNC_GPIO &pcfg_pull_none>;
+ };
+ };
+
pmic {
pmic_int_l: pmic-int-l {
rockchip,pins =
<1 RK_PC5 RK_FUNC_GPIO &pcfg_pull_up>;
};
- pmic_dvs2: pmic-dvs2 {
- rockchip,pins =
- <1 RK_PC2 RK_FUNC_GPIO &pcfg_pull_down>;
- };
-
- vsel1_gpio: vsel1-gpio {
+ vsel1_pin: vsel1-pin {
rockchip,pins = <1 RK_PC1 RK_FUNC_GPIO &pcfg_pull_down>;
};
- vsel2_gpio: vsel2-gpio {
+ vsel2_pin: vsel2-pin {
rockchip,pins = <1 RK_PB6 RK_FUNC_GPIO &pcfg_pull_down>;
};
};
@@ -546,6 +617,17 @@
vcc5v0_host_en: vcc5v0-host-en {
rockchip,pins =
<4 RK_PD1 RK_FUNC_GPIO &pcfg_pull_none>;
+ };
+ };
+
+ usb-typec {
+ usbc0_int: usbc0-int {
+ rockchip,pins = <1 RK_PA2 RK_FUNC_GPIO &pcfg_pull_up>;
+ };
+
+ vcc5v0_typec0_en: vcc5v0-typec0-en {
+ rockchip,pins =
+ <2 RK_PA0 RK_FUNC_GPIO &pcfg_pull_none>;
};
};
};
@@ -570,7 +652,6 @@
mmc-hs400-1_8v;
mmc-hs400-enhanced-strobe;
non-removable;
- supports-emmc;
status = "okay";
};
@@ -579,10 +660,8 @@
bus-width = <4>;
cap-mmc-highspeed;
cap-sd-highspeed;
- supports-sd;
clock-frequency = <150000000>;
disable-wp;
- sd-uhs-sdr104;
max-frequency = <150000000>;
pinctrl-names = "default";
pinctrl-0 = <&sdmmc_clk &sdmmc_cmd &sdmmc_cd &sdmmc_bus4>;
@@ -592,8 +671,22 @@
};
&tcphy0 {
- extcon = <&fusb0>;
status = "okay";
+ svid = <0xff01>;
+ orientation-switch;
+
+ port {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ tcphy0_orientation_switch: endpoint@0 {
+ reg = <0>;
+ remote-endpoint = <&usbc0_orien_sw>;
+ };
+ tcphy_dp_altmode_switch: endpoint@1 {
+ reg = <1>;
+ remote-endpoint = <&dp_mode_sw>;
+ };
+ };
};
&tcphy1 {
@@ -610,7 +703,6 @@
&u2phy0 {
status = "okay";
- extcon = <&fusb0>;
u2phy0_otg: otg-port {
status = "okay";
@@ -668,7 +760,15 @@
&usbdrd_dwc3_0 {
status = "okay";
dr_mode = "otg";
- extcon = <&fusb0>;
+ usb-role-switch;
+ port {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ dwc3_0_role_switch: endpoint@0 {
+ reg = <0>;
+ remote-endpoint = <&usbc0_role_sw>;
+ };
+ };
};
&usbdrd3_1 {
@@ -694,12 +794,4 @@
&vopl_mmu {
status = "okay";
-};
-
-&pinctrl {
- fusb30x {
- fusb0_int: fusb0-int {
- rockchip,pins = <1 RK_PA2 RK_FUNC_GPIO &pcfg_pull_up>;
- };
- };
-};
+};
\ No newline at end of file
--
Gitblit v1.6.2