From 071106ecf68c401173c58808b1cf5f68cc50d390 Mon Sep 17 00:00:00 2001
From: hc <hc@nodka.com>
Date: Fri, 05 Jan 2024 08:39:27 +0000
Subject: [PATCH] change wifi driver to cypress
---
kernel/arch/arm64/boot/dts/rockchip/rk3328-evb.dts | 358 ++++++++++++++++++++++++++++++-----------------------------
1 files changed, 183 insertions(+), 175 deletions(-)
diff --git a/kernel/arch/arm64/boot/dts/rockchip/rk3328-evb.dts b/kernel/arch/arm64/boot/dts/rockchip/rk3328-evb.dts
index 0083ad4..468a9ae 100644
--- a/kernel/arch/arm64/boot/dts/rockchip/rk3328-evb.dts
+++ b/kernel/arch/arm64/boot/dts/rockchip/rk3328-evb.dts
@@ -12,30 +12,19 @@
compatible = "rockchip,rk3328-evb", "rockchip,rk3328";
chosen {
- stdout-path = "serial2:1500000n8";
+ bootargs = "earlycon=uart8250,mmio32,0xff130000 swiotlb=1 kpti=0 console=ttyFIQ0 root=PARTUUID=614e0000-0000 rw rootwait coherent_pool=1m";
};
- adc-keys {
- compatible = "adc-keys";
- io-channels = <&saradc 0>;
- io-channel-names = "buttons";
- poll-interval = <100>;
- keyup-threshold-microvolt = <1800000>;
-
- vol-up-key {
- linux,code = <KEY_VOLUMEUP>;
- label = "volume up";
- press-threshold-microvolt = <18000>;
- };
- };
-
- dc_12v: dc-12v {
- compatible = "regulator-fixed";
- regulator-name = "dc_12v";
- regulator-always-on;
- regulator-boot-on;
- regulator-min-microvolt = <12000000>;
- regulator-max-microvolt = <12000000>;
+ fiq-debugger {
+ compatible = "rockchip,fiq-debugger";
+ rockchip,serial-id = <2>;
+ rockchip,signal-irq = <159>;
+ rockchip,wake-irq = <0>;
+ /* If enable uart uses irq instead of fiq */
+ rockchip,irq-mode-enable = <1>;
+ rockchip,baudrate = <1500000>; /* Only 115200 and 1500000 */
+ interrupts = <GIC_SPI 127 IRQ_TYPE_LEVEL_LOW>;
+ status = "okay";
};
reserved-memory {
@@ -47,6 +36,24 @@
compatible = "rockchip,drm-logo";
reg = <0x0 0x0 0x0 0x0>;
};
+
+ ramoops: ramoops@110000 {
+ compatible = "ramoops";
+ reg = <0x0 0x110000 0x0 0xf0000>;
+ record-size = <0x20000>;
+ console-size = <0x80000>;
+ ftrace-size = <0x00000>;
+ pmsg-size = <0x50000>;
+ };
+ };
+
+ dc_12v: dc-12v {
+ compatible = "regulator-fixed";
+ regulator-name = "dc_12v";
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-min-microvolt = <12000000>;
+ regulator-max-microvolt = <12000000>;
};
sdio_pwrseq: sdio-pwrseq {
@@ -63,23 +70,29 @@
reset-gpios = <&gpio1 18 GPIO_ACTIVE_LOW>;
};
- fiq-debugger {
- compatible = "rockchip,fiq-debugger";
- rockchip,serial-id = <2>;
- rockchip,signal-irq = <159>;
- rockchip,wake-irq = <0>;
- /* If enable uart uses irq instead of fiq */
- rockchip,irq-mode-enable = <0>;
- rockchip,baudrate = <1500000>; /* Only 115200 and 1500000 */
- interrupts = <GIC_SPI 127 IRQ_TYPE_LEVEL_LOW>;
- status = "okay";
+ vcc_host_vbus: host-vbus-regulator {
+ compatible = "regulator-fixed";
+ gpio = <&gpio0 RK_PA0 GPIO_ACTIVE_HIGH>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&host_vbus_drv>;
+ regulator-name = "vcc_host_vbus";
+ regulator-min-microvolt = <5000000>;
+ regulator-max-microvolt = <5000000>;
+ enable-active-high;
+ };
+
+ vcc_phy: vcc-phy-regulator {
+ compatible = "regulator-fixed";
+ regulator-name = "vcc_phy";
+ regulator-always-on;
+ regulator-boot-on;
};
vcc_sd: sdmmc-regulator {
compatible = "regulator-fixed";
gpio = <&gpio0 30 GPIO_ACTIVE_LOW>;
pinctrl-names = "default";
- pinctrl-0 = <&sdmmc0m1_gpio>;
+ pinctrl-0 = <&sdmmc0m1_pin>;
regulator-name = "vcc_sd";
regulator-min-microvolt = <3300000>;
regulator-max-microvolt = <3300000>;
@@ -96,67 +109,17 @@
vin-supply = <&dc_12v>;
};
- gmac_clkin: external-gmac-clock {
- compatible = "fixed-clock";
- clock-frequency = <125000000>;
- clock-output-names = "gmac_clkin";
- #clock-cells = <0>;
- };
-
- vcc_phy: vcc-phy-regulator {
- compatible = "regulator-fixed";
- regulator-name = "vcc_phy";
- regulator-always-on;
- regulator-boot-on;
- };
-
- sound {
- compatible = "simple-audio-card";
- simple-audio-card,format = "i2s";
- simple-audio-card,mclk-fs = <256>;
- simple-audio-card,name = "rockchip,rk3328";
- simple-audio-card,cpu {
- sound-dai = <&i2s1>;
- };
- simple-audio-card,codec {
- sound-dai = <&codec>;
- };
- };
-
- hdmi-sound {
- compatible = "simple-audio-card";
- simple-audio-card,format = "i2s";
- simple-audio-card,mclk-fs = <128>;
- simple-audio-card,name = "rockchip,hdmi";
- simple-audio-card,cpu {
- sound-dai = <&i2s0>;
- };
- simple-audio-card,codec {
- sound-dai = <&hdmi>;
- };
- };
-
- spdif-sound {
- compatible = "simple-audio-card";
- simple-audio-card,name = "rockchip,spdif";
- simple-audio-card,cpu {
- sound-dai = <&spdif>;
- };
- simple-audio-card,codec {
- sound-dai = <&spdif_out>;
- };
- };
-
- spdif_out: spdif-out {
- compatible = "linux,spdif-dit";
- #sound-dai-cells = <0>;
- };
-
- xin32k: xin32k {
- compatible = "fixed-clock";
- clock-frequency = <32768>;
- clock-output-names = "xin32k";
- #clock-cells = <0>;
+ wireless-bluetooth {
+ compatible = "bluetooth-platdata";
+ clocks = <&rk805 1>;
+ clock-names = "ext_clock";
+ uart_rts_gpios = <&gpio1 10 GPIO_ACTIVE_LOW>;
+ pinctrl-names = "default", "rts_gpio";
+ pinctrl-0 = <&uart0_rts>;
+ pinctrl-1 = <&uart0_gpios>;
+ BT,power_gpio = <&gpio1 21 GPIO_ACTIVE_HIGH>;
+ BT,wake_host_irq = <&gpio1 26 GPIO_ACTIVE_HIGH>;
+ status = "okay";
};
wireless-wlan {
@@ -173,23 +136,12 @@
status = "okay";
};
-&i2s0 {
- #sound-dai-cells = <0>;
- rockchip,bclk-fs = <128>;
- status = "okay";
-};
-
-&i2s1 {
- #sound-dai-cells = <0>;
- status = "okay";
+&cif {
+ status = "disabled";
};
&codec {
- #sound-dai-cells = <0>;
- status = "okay";
-};
-
-&spdif {
+ mute-gpios = <&grf_gpio 0 GPIO_ACTIVE_LOW>;
#sound-dai-cells = <0>;
status = "okay";
};
@@ -198,8 +150,7 @@
cpu-supply = <&vdd_arm>;
};
-&dmc {
- center-supply = <&vdd_logic>;
+&dfi {
status = "okay";
};
@@ -219,14 +170,38 @@
};
};
+&dmc {
+ center-supply = <&vdd_logic>;
+ status = "okay";
+};
+
&emmc {
bus-width = <8>;
cap-mmc-highspeed;
mmc-hs200-1_8v;
+ supports-emmc;
+ disable-wp;
non-removable;
+ num-slots = <1>;
pinctrl-names = "default";
pinctrl-0 = <&emmc_clk &emmc_cmd &emmc_bus8>;
status = "okay";
+};
+
+&gmac2io {
+ phy-supply = <&vcc_phy>;
+ phy-mode = "rgmii";
+ clock_in_out = "input";
+ snps,reset-gpio = <&gpio1 RK_PC2 GPIO_ACTIVE_LOW>;
+ snps,reset-active-low;
+ snps,reset-delays-us = <0 10000 50000>;
+ assigned-clocks = <&cru SCLK_MAC2IO>, <&cru SCLK_MAC2IO_EXT>;
+ assigned-clock-parents = <&gmac_clkin>, <&gmac_clkin>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&rgmiim1_pins>;
+ tx_delay = <0x26>;
+ rx_delay = <0x11>;
+ status = "disabled";
};
&gmac2phy {
@@ -239,49 +214,8 @@
status = "okay";
};
-&gmac2io {
- phy-supply = <&vcc_phy>;
- phy-mode = "rgmii";
- clock_in_out = "input";
- snps,reset-gpio = <&gpio1 18 GPIO_ACTIVE_LOW>;
- snps,reset-active-low;
- snps,reset-delays-us = <0 10000 50000>;
- assigned-clocks = <&cru SCLK_MAC2IO>, <&cru SCLK_MAC2IO_EXT>;
- assigned-clock-parents = <&gmac_clkin>, <&gmac_clkin>;
- pinctrl-names = "default";
- pinctrl-0 = <&rgmiim1_pins>;
- tx_delay = <0x26>;
- rx_delay = <0x11>;
- status = "disabled";
-};
-
&gpu {
- status = "okay";
mali-supply = <&vdd_logic>;
-};
-
-&io_domains {
- status = "okay";
-
- vccio1-supply = <&vcc_io>;
- vccio2-supply = <&vcc18_emmc>;
- vccio3-supply = <&vcc_io>;
- vccio4-supply = <&vcc_18>;
- vccio5-supply = <&vcc_io>;
- vccio6-supply = <&vcc_io>;
- pmuio-supply = <&vcc_io>;
-};
-
-&u3phy {
- vbus-drv-gpios = <&gpio0 0 GPIO_ACTIVE_HIGH>;
- status = "okay";
-};
-
-&u3phy_utmi {
- status = "okay";
-};
-
-&u3phy_pipe {
status = "okay";
};
@@ -296,12 +230,8 @@
status = "okay";
};
-&usbdrd3 {
- status = "okay";
-};
-
-&usbdrd_dwc3 {
- status = "okay";
+&i2c0 {
+ status = "disabled";
};
&i2c1 {
@@ -320,13 +250,26 @@
pinctrl-0 = <&pmic_int_l>;
rockchip,system-power-controller;
wakeup-source;
+ status = "okay";
vcc1-supply = <&vcc_sys>;
vcc2-supply = <&vcc_sys>;
vcc3-supply = <&vcc_sys>;
vcc4-supply = <&vcc_sys>;
vcc5-supply = <&vcc_io>;
- vcc6-supply = <&vcc_io>;
+ vcc6-supply = <&vcc_sys>;
+
+ rtc {
+ status = "okay";
+ };
+
+ pwrkey {
+ status = "okay";
+ };
+
+ gpio {
+ status = "okay";
+ };
regulators {
vdd_logic: DCDC_REG1 {
@@ -398,19 +341,42 @@
};
};
- vdd_11: LDO_REG3 {
- regulator-name = "vdd_11";
- regulator-min-microvolt = <1100000>;
- regulator-max-microvolt = <1100000>;
+ vdd_10: LDO_REG3 {
+ regulator-name = "vdd_10";
+ regulator-min-microvolt = <1000000>;
+ regulator-max-microvolt = <1000000>;
regulator-always-on;
regulator-boot-on;
regulator-state-mem {
regulator-on-in-suspend;
- regulator-suspend-microvolt = <1100000>;
+ regulator-suspend-microvolt = <1000000>;
};
};
};
};
+};
+
+&i2s0 {
+ #sound-dai-cells = <0>;
+ rockchip,bclk-fs = <128>;
+ status = "okay";
+};
+
+&i2s1 {
+ #sound-dai-cells = <0>;
+ status = "okay";
+};
+
+&io_domains {
+ status = "okay";
+
+ vccio1-supply = <&vcc_io>;
+ vccio2-supply = <&vcc18_emmc>;
+ vccio3-supply = <&vcc_io>;
+ vccio4-supply = <&vcc_18>;
+ vccio5-supply = <&vcc_io>;
+ vccio6-supply = <&vcc_io>;
+ pmuio-supply = <&vcc_io>;
};
&mpp_srv {
@@ -426,8 +392,23 @@
sdio-pwrseq {
wifi_enable_h: wifi-enable-h {
- rockchip,pins =
- <1 RK_PC2 RK_FUNC_GPIO &pcfg_pull_none>;
+ rockchip,pins = <1 RK_PC2 RK_FUNC_GPIO &pcfg_pull_none>;
+ };
+ };
+
+ usb {
+ host_vbus_drv: host-vbus-drv {
+ rockchip,pins = <0 RK_PA0 RK_FUNC_GPIO &pcfg_pull_none>;
+ };
+
+ otg_vbus_drv: otg-vbus-drv {
+ rockchip,pins = <0 RK_PD3 RK_FUNC_GPIO &pcfg_pull_none>;
+ };
+ };
+
+ wireless-bluetooth {
+ uart0_gpios: uart0-gpios {
+ rockchip,pins = <1 RK_PB2 RK_FUNC_GPIO &pcfg_pull_none>;
};
};
};
@@ -545,13 +526,13 @@
};
&rockchip_suspend {
- status = "okay";
rockchip,virtual-poweroff = <1>;
+ status = "okay";
};
&saradc {
- status = "okay";
vref-supply = <&vcc_18>;
+ status = "okay";
};
&sdio {
@@ -564,6 +545,8 @@
non-removable;
pinctrl-names = "default";
pinctrl-0 = <&sdmmc1_bus4 &sdmmc1_cmd &sdmmc1_clk>;
+ no-mmc;
+ no-sd;
status = "okay";
};
@@ -575,7 +558,13 @@
max-frequency = <150000000>;
pinctrl-names = "default";
pinctrl-0 = <&sdmmc0_clk &sdmmc0_cmd &sdmmc0_dectn &sdmmc0_bus4>;
+ no-sdio;
+ no-mmc;
vmmc-supply = <&vcc_sd>;
+ status = "okay";
+};
+
+&spdif {
status = "okay";
};
@@ -595,6 +584,25 @@
status = "okay";
};
+&u3phy {
+ vbus-supply = <&vcc_host_vbus>;
+ status = "okay";
+};
+
+&u3phy_pipe {
+ status = "okay";
+};
+
+&u3phy_utmi {
+ status = "okay";
+};
+
+&uart0 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&uart0_xfer &uart0_cts>;
+ status = "okay";
+};
+
&usb20_otg {
status = "okay";
};
@@ -604,6 +612,14 @@
};
&usb_host0_ohci {
+ status = "okay";
+};
+
+&usbdrd3 {
+ status = "okay";
+};
+
+&usbdrd_dwc3 {
status = "okay";
};
@@ -620,14 +636,6 @@
};
&vepu_mmu {
- status = "okay";
-};
-
-&vepu22 {
- status = "okay";
-};
-
-&vepu22_mmu {
status = "okay";
};
--
Gitblit v1.6.2