From 071106ecf68c401173c58808b1cf5f68cc50d390 Mon Sep 17 00:00:00 2001
From: hc <hc@nodka.com>
Date: Fri, 05 Jan 2024 08:39:27 +0000
Subject: [PATCH] change wifi driver to cypress

---
 kernel/arch/arm64/boot/dts/rockchip/NK-R36S0.dtsi |   64 +++++++++++++++++++++++++------
 1 files changed, 51 insertions(+), 13 deletions(-)

diff --git a/kernel/arch/arm64/boot/dts/rockchip/NK-R36S0.dtsi b/kernel/arch/arm64/boot/dts/rockchip/NK-R36S0.dtsi
index 92a194c..ad8ce8e 100755
--- a/kernel/arch/arm64/boot/dts/rockchip/NK-R36S0.dtsi
+++ b/kernel/arch/arm64/boot/dts/rockchip/NK-R36S0.dtsi
@@ -137,7 +137,7 @@
 			};
 			
 			hp_en {
-				gpio_num = <&gpio3 RK_PA6 GPIO_ACTIVE_HIGH>;//HP_EN_GPIO3_A6_3V3
+				gpio_num = <&gpio3 RK_PA6 GPIO_ACTIVE_LOW>;//HP_EN_GPIO3_A6_3V3
 				gpio_function = <0>;
 			};
 			
@@ -145,6 +145,47 @@
 				gpio_num = <&gpio3 RK_PC6 GPIO_ACTIVE_HIGH>; //WIFI_PWREN_GPIO3_C6_1V8
 				gpio_function = <0>;
 			};
+	#if 0		
+			do1 {
+				gpio_num = <&gpio1 RK_PD0 GPIO_ACTIVE_LOW>; 
+				gpio_function = <0>;
+			};
+			
+			do2 {
+				gpio_num = <&gpio1 RK_PD2 GPIO_ACTIVE_HIGH>;
+				gpio_function = <0>;
+			};
+			
+			do3 {
+				gpio_num = <&gpio1 RK_PD1 GPIO_ACTIVE_HIGH>;
+				gpio_function = <0>;
+			};
+			
+			do4 {
+				gpio_num = <&gpio1 RK_PD3 GPIO_ACTIVE_HIGH>;
+				gpio_function = <0>;
+			};
+			
+			do5 {
+				gpio_num = <&gpio2 RK_PD6 GPIO_ACTIVE_LOW>; 
+				gpio_function = <0>;
+			};
+			
+			do6 {
+				gpio_num = <&gpio2 RK_PD7 GPIO_ACTIVE_LOW>; 
+				gpio_function = <0>;
+			};
+			
+			do7 {
+				gpio_num = <&gpio3 RK_PA0 GPIO_ACTIVE_LOW>; 
+				gpio_function = <0>;
+			};
+			
+			di1 {
+				gpio_num = <&gpio2 RK_PD5 GPIO_ACTIVE_HIGH>;
+				gpio_function = <1>;
+			};
+	#endif
 		};
 #if 0			
 	    nk_io_init {
@@ -339,12 +380,12 @@
                 remote-endpoint = <&panel_in>;
             };
         };
-    };
+   
+	};
 };
 
 &edp_phy {
-  status = "okay";
-
+	status = "okay";
 };
 
 &edp_in_vp0 {
@@ -408,7 +449,7 @@
 	phy-mode = "rgmii";
 	clock_in_out = "output";
 
-	snps,reset-gpio = <&gpio2 RK_PD3 GPIO_ACTIVE_LOW>;
+	snps,reset-gpio = <&gpio2 RK_PC6 GPIO_ACTIVE_LOW>;
 	snps,reset-active-low;
 	/* Reset time is 20ms, 100ms for rtl8211f */
 	snps,reset-delays-us = <0 20000 100000>;
@@ -428,7 +469,9 @@
 	rx_delay = <0x2f>;
 
 	phy-handle = <&rgmii_phy0>;
+	
 	status = "disabled";
+	
 };
 
 &gmac1 {
@@ -462,9 +505,7 @@
  * power-supply should switche to vcc3v3_lcd1_n
  * when mipi panel is connected to dsi1.
  */
-&gt1x {
-	power-supply = <&vcc3v3_lcd0_n>;
-};
+
 
 &i2c3 {
 	status = "okay";
@@ -483,7 +524,7 @@
 };
 
 &i2c4 {
-	status = "okay";
+	status = "disabled";
 	gc8034: gc8034@37 {
 		compatible = "galaxycore,gc8034";
 		status = "okay";
@@ -495,7 +536,6 @@
 		reset-gpios = <&gpio3 RK_PB6 GPIO_ACTIVE_LOW>;
 		pwdn-gpios = <&gpio4 RK_PB4 GPIO_ACTIVE_LOW>;
 		rockchip,grf = <&grf>;
-		power-domains = <&power RK3568_PD_VI>;
 		rockchip,camera-module-index = <0>;
 		rockchip,camera-module-facing = "back";
 		rockchip,camera-module-name = "RK-CMK-8M-2-v1";
@@ -529,7 +569,7 @@
 		};
 	};
 	ov5695: ov5695@36 {
-		status = "okay";
+		status = "disabled";
 		compatible = "ovti,ov5695";
 		reg = <0x36>;
 		clocks = <&cru CLK_CIF_OUT>;
@@ -672,8 +712,6 @@
 		};
 	};
 };
-
-
 
 
 

--
Gitblit v1.6.2