From 071106ecf68c401173c58808b1cf5f68cc50d390 Mon Sep 17 00:00:00 2001
From: hc <hc@nodka.com>
Date: Fri, 05 Jan 2024 08:39:27 +0000
Subject: [PATCH] change wifi driver to cypress
---
kernel/arch/arm64/boot/dts/renesas/ulcb-kf.dtsi | 221 +++++++++++++++++++++++++++++++++++++++++++++++++++----
1 files changed, 204 insertions(+), 17 deletions(-)
diff --git a/kernel/arch/arm64/boot/dts/renesas/ulcb-kf.dtsi b/kernel/arch/arm64/boot/dts/renesas/ulcb-kf.dtsi
index 8bf3091..24d0a13 100644
--- a/kernel/arch/arm64/boot/dts/renesas/ulcb-kf.dtsi
+++ b/kernel/arch/arm64/boot/dts/renesas/ulcb-kf.dtsi
@@ -6,10 +6,50 @@
* Copyright (C) 2017 Cogent Embedded, Inc.
*/
+/*
+ * SSI-PCM3168A
+ * aplay -D plughw:0,2 xxx.wav
+ * arecord -D plughw:0,3 xxx.wav
+ */
+
/ {
aliases {
serial1 = &hscif0;
serial2 = &scif1;
+ mmc2 = &sdhi3;
+ };
+
+ clksndsel: clksndsel {
+ #clock-cells = <0>;
+ compatible = "gpio-mux-clock";
+ clocks = <&cs2000>, <&audio_clk_a>; /* clk8snd, clksnd */
+ select-gpios = <&gpio_exp_75 13 GPIO_ACTIVE_HIGH>;
+ };
+
+ snd_3p3v: regulator-snd_3p3v {
+ compatible = "regulator-fixed";
+ regulator-name = "snd-3.3v";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ };
+
+ snd_vcc5v: regulator-snd_vcc5v {
+ compatible = "regulator-fixed";
+ regulator-name = "snd-vcc5v";
+ regulator-min-microvolt = <5000000>;
+ regulator-max-microvolt = <5000000>;
+ };
+
+ wlan_en: regulator-wlan_en {
+ compatible = "regulator-fixed";
+ regulator-name = "wlan-en-regulator";
+
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+
+ gpio = <&gpio_exp_74 4 GPIO_ACTIVE_HIGH>;
+ startup-delay-us = <70000>;
+ enable-active-high;
};
};
@@ -44,6 +84,57 @@
};
&i2c2 {
+ i2cswitch2: i2c-switch@71 {
+ compatible = "nxp,pca9548";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <0x71>;
+ reset-gpios = <&gpio5 3 GPIO_ACTIVE_LOW>;
+
+ /* Audio_SDA, Audio_SCL */
+ i2c@7 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <7>;
+
+ pcm3168a: audio-codec@44 {
+ #sound-dai-cells = <0>;
+ compatible = "ti,pcm3168a";
+ reg = <0x44>;
+ clocks = <&clksndsel>;
+ clock-names = "scki";
+
+ VDD1-supply = <&snd_3p3v>;
+ VDD2-supply = <&snd_3p3v>;
+ VCCAD1-supply = <&snd_vcc5v>;
+ VCCAD2-supply = <&snd_vcc5v>;
+ VCCDA1-supply = <&snd_vcc5v>;
+ VCCDA2-supply = <&snd_vcc5v>;
+
+ ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ mclk-fs = <512>;
+ port@0 {
+ reg = <0>;
+ pcm3168a_endpoint_p: endpoint {
+ remote-endpoint = <&rsnd_for_pcm3168a_play>;
+ clocks = <&clksndsel>;
+ };
+ };
+ port@1 {
+ reg = <1>;
+ pcm3168a_endpoint_c: endpoint {
+ remote-endpoint = <&rsnd_for_pcm3168a_capture>;
+ clocks = <&clksndsel>;
+ };
+ };
+ };
+ };
+ };
+ };
+
+ /* U11 */
gpio_exp_74: gpio@74 {
compatible = "ti,tca9539";
reg = <0x74>;
@@ -52,6 +143,13 @@
interrupt-controller;
interrupt-parent = <&gpio6>;
interrupts = <8 IRQ_TYPE_EDGE_FALLING>;
+
+ audio_out_off {
+ gpio-hog;
+ gpios = <0 GPIO_ACTIVE_HIGH>; /* P00 */
+ output-high;
+ line-name = "Audio_Out_OFF";
+ };
hub_pwen {
gpio-hog;
@@ -67,6 +165,13 @@
line-name = "HUB rst";
};
+ otg_extlpn {
+ gpio-hog;
+ gpios = <9 GPIO_ACTIVE_HIGH>;
+ output-high;
+ line-name = "OTG EXTLPn";
+ };
+
otg_offvbusn {
gpio-hog;
gpios = <8 GPIO_ACTIVE_HIGH>;
@@ -74,14 +179,22 @@
line-name = "OTG OFFVBUSn";
};
- otg_extlpn {
+ sd-wifi-mux {
gpio-hog;
- gpios = <9 GPIO_ACTIVE_HIGH>;
+ gpios = <5 GPIO_ACTIVE_HIGH>;
+ output-low; /* Connect WL1837 */
+ line-name = "SD WiFi mux";
+ };
+
+ snd_rst {
+ gpio-hog;
+ gpios = <15 GPIO_ACTIVE_HIGH>; /* P17 */
output-high;
- line-name = "OTG EXTLPn";
+ line-name = "SND_RST";
};
};
+ /* U5 */
gpio_exp_75: gpio@75 {
compatible = "ti,tca9539";
reg = <0x75>;
@@ -91,17 +204,17 @@
interrupt-parent = <&gpio6>;
interrupts = <4 IRQ_TYPE_EDGE_FALLING>;
};
+};
- i2cswitch2: i2c-switch@71 {
+&i2c4 {
+ i2cswitch4: i2c-switch@71 {
compatible = "nxp,pca9548";
#address-cells = <1>;
#size-cells = <0>;
reg = <0x71>;
- reset-gpios = <&gpio5 3 GPIO_ACTIVE_LOW>;
+ reset-gpios = <&gpio3 15 GPIO_ACTIVE_LOW>;
};
-};
-&i2c4 {
gpio_exp_76: gpio@76 {
compatible = "ti,tca9539";
reg = <0x76>;
@@ -120,14 +233,6 @@
interrupt-controller;
interrupt-parent = <&gpio5>;
interrupts = <9 IRQ_TYPE_EDGE_FALLING>;
- };
-
- i2cswitch4: i2c-switch@71 {
- compatible = "nxp,pca9548";
- #address-cells = <1>;
- #size-cells = <0>;
- reg = <0x71>;
- reset-gpios= <&gpio3 15 GPIO_ACTIVE_LOW>;
};
};
@@ -165,8 +270,19 @@
};
scif1_pins: scif1 {
- groups = "scif1_data_b", "scif1_ctrl";
+ groups = "scif1_data_b";
function = "scif1";
+ };
+
+ sdhi3_pins: sdhi3 {
+ groups = "sdhi3_data4", "sdhi3_ctrl";
+ function = "sdhi3";
+ power-source = <3300>;
+ };
+
+ sound_pcm_pins: sound-pcm {
+ groups = "ssi349_ctrl", "ssi3_data", "ssi4_data";
+ function = "ssi";
};
usb0_pins: usb0 {
@@ -175,14 +291,85 @@
};
};
+&rcar_sound {
+ pinctrl-0 = <&sound_pins
+ &sound_clk_pins
+ &sound_pcm_pins>;
+
+ ports {
+ /* rsnd_port0/1 are on salvator-common */
+ rsnd_port2: port@2 {
+ reg = <2>;
+ rsnd_for_pcm3168a_play: endpoint {
+ remote-endpoint = <&pcm3168a_endpoint_p>;
+
+ dai-format = "i2s";
+ bitclock-master = <&rsnd_for_pcm3168a_play>;
+ frame-master = <&rsnd_for_pcm3168a_play>;
+ dai-tdm-slot-num = <8>;
+
+ playback = <&ssi3>;
+ };
+ };
+ rsnd_port3: port@3 {
+ reg = <3>;
+ rsnd_for_pcm3168a_capture: endpoint {
+ remote-endpoint = <&pcm3168a_endpoint_c>;
+
+ dai-format = "i2s";
+ bitclock-master = <&rsnd_for_pcm3168a_capture>;
+ frame-master = <&rsnd_for_pcm3168a_capture>;
+ dai-tdm-slot-num = <6>;
+
+ capture = <&ssi4>;
+ };
+ };
+ };
+};
+
&scif1 {
pinctrl-0 = <&scif1_pins>;
pinctrl-names = "default";
- uart-has-rtscts;
status = "okay";
};
+&sdhi3 {
+ pinctrl-0 = <&sdhi3_pins>;
+ pinctrl-names = "default";
+
+ vmmc-supply = <&wlan_en>;
+ vqmmc-supply = <&wlan_en>;
+ bus-width = <4>;
+ no-1-8-v;
+ non-removable;
+ cap-power-off-card;
+ keep-power-in-suspend;
+ max-frequency = <26000000>;
+ status = "okay";
+
+ #address-cells = <1>;
+ #size-cells = <0>;
+ wlcore: wlcore@2 {
+ compatible = "ti,wl1837";
+ reg = <2>;
+ interrupt-parent = <&gpio1>;
+ interrupts = <25 IRQ_TYPE_EDGE_FALLING>;
+ };
+};
+
+&sound_card {
+ dais = <&rsnd_port0 /* ak4613 */
+ &rsnd_port1 /* HDMI0 */
+ &rsnd_port2 /* pcm3168a playback */
+ &rsnd_port3 /* pcm3168a capture */
+ >;
+};
+
+&ssi4 {
+ shared-pin;
+};
+
&usb2_phy0 {
pinctrl-0 = <&usb0_pins>;
pinctrl-names = "default";
--
Gitblit v1.6.2