From 071106ecf68c401173c58808b1cf5f68cc50d390 Mon Sep 17 00:00:00 2001
From: hc <hc@nodka.com>
Date: Fri, 05 Jan 2024 08:39:27 +0000
Subject: [PATCH] change wifi driver to cypress
---
kernel/arch/arm64/boot/dts/qcom/msm8996.dtsi | 3031 +++++++++++++++++++++++++++++++++++++++++-----------------
1 files changed, 2,133 insertions(+), 898 deletions(-)
diff --git a/kernel/arch/arm64/boot/dts/qcom/msm8996.dtsi b/kernel/arch/arm64/boot/dts/qcom/msm8996.dtsi
index 3e7baab..0bc5fef 100644
--- a/kernel/arch/arm64/boot/dts/qcom/msm8996.dtsi
+++ b/kernel/arch/arm64/boot/dts/qcom/msm8996.dtsi
@@ -1,23 +1,14 @@
+// SPDX-License-Identifier: GPL-2.0-only
/* Copyright (c) 2014-2015, The Linux Foundation. All rights reserved.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 and
- * only version 2 as published by the Free Software Foundation.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
*/
#include <dt-bindings/interrupt-controller/arm-gic.h>
#include <dt-bindings/clock/qcom,gcc-msm8996.h>
#include <dt-bindings/clock/qcom,mmcc-msm8996.h>
#include <dt-bindings/clock/qcom,rpmcc.h>
+#include <dt-bindings/soc/qcom,apr.h>
/ {
- model = "Qualcomm Technologies, Inc. MSM8996";
-
interrupt-parent = <&intc>;
#address-cells = <2>;
@@ -25,10 +16,132 @@
chosen { };
+ clocks {
+ xo_board: xo-board {
+ compatible = "fixed-clock";
+ #clock-cells = <0>;
+ clock-frequency = <19200000>;
+ clock-output-names = "xo_board";
+ };
+
+ sleep_clk: sleep-clk {
+ compatible = "fixed-clock";
+ #clock-cells = <0>;
+ clock-frequency = <32764>;
+ clock-output-names = "sleep_clk";
+ };
+ };
+
+ cpus {
+ #address-cells = <2>;
+ #size-cells = <0>;
+
+ CPU0: cpu@0 {
+ device_type = "cpu";
+ compatible = "qcom,kryo";
+ reg = <0x0 0x0>;
+ enable-method = "psci";
+ cpu-idle-states = <&CPU_SLEEP_0>;
+ capacity-dmips-mhz = <1024>;
+ next-level-cache = <&L2_0>;
+ L2_0: l2-cache {
+ compatible = "cache";
+ cache-level = <2>;
+ };
+ };
+
+ CPU1: cpu@1 {
+ device_type = "cpu";
+ compatible = "qcom,kryo";
+ reg = <0x0 0x1>;
+ enable-method = "psci";
+ cpu-idle-states = <&CPU_SLEEP_0>;
+ capacity-dmips-mhz = <1024>;
+ next-level-cache = <&L2_0>;
+ };
+
+ CPU2: cpu@100 {
+ device_type = "cpu";
+ compatible = "qcom,kryo";
+ reg = <0x0 0x100>;
+ enable-method = "psci";
+ cpu-idle-states = <&CPU_SLEEP_0>;
+ capacity-dmips-mhz = <1024>;
+ next-level-cache = <&L2_1>;
+ L2_1: l2-cache {
+ compatible = "cache";
+ cache-level = <2>;
+ };
+ };
+
+ CPU3: cpu@101 {
+ device_type = "cpu";
+ compatible = "qcom,kryo";
+ reg = <0x0 0x101>;
+ enable-method = "psci";
+ cpu-idle-states = <&CPU_SLEEP_0>;
+ capacity-dmips-mhz = <1024>;
+ next-level-cache = <&L2_1>;
+ };
+
+ cpu-map {
+ cluster0 {
+ core0 {
+ cpu = <&CPU0>;
+ };
+
+ core1 {
+ cpu = <&CPU1>;
+ };
+ };
+
+ cluster1 {
+ core0 {
+ cpu = <&CPU2>;
+ };
+
+ core1 {
+ cpu = <&CPU3>;
+ };
+ };
+ };
+
+ idle-states {
+ entry-method = "psci";
+
+ CPU_SLEEP_0: cpu-sleep-0 {
+ compatible = "arm,idle-state";
+ idle-state-name = "standalone-power-collapse";
+ arm,psci-suspend-param = <0x00000004>;
+ entry-latency-us = <130>;
+ exit-latency-us = <80>;
+ min-residency-us = <300>;
+ };
+ };
+ };
+
+ firmware {
+ scm {
+ compatible = "qcom,scm-msm8996";
+ qcom,dload-mode = <&tcsr 0x13000>;
+ };
+ };
+
+ tcsr_mutex: hwlock {
+ compatible = "qcom,tcsr-mutex";
+ syscon = <&tcsr_mutex_regs 0 0x1000>;
+ #hwlock-cells = <1>;
+ };
+
memory {
device_type = "memory";
/* We expect the bootloader to fill in the reg */
reg = <0 0 0 0>;
+ };
+
+ psci {
+ compatible = "arm,psci-1.0";
+ method = "smc";
};
reserved-memory {
@@ -86,208 +199,12 @@
qcom,client-id = <1>;
qcom,vmid = <15>;
};
- };
- cpus {
- #address-cells = <2>;
- #size-cells = <0>;
-
- CPU0: cpu@0 {
- device_type = "cpu";
- compatible = "qcom,kryo";
- reg = <0x0 0x0>;
- enable-method = "psci";
- next-level-cache = <&L2_0>;
- L2_0: l2-cache {
- compatible = "cache";
- cache-level = <2>;
- };
+ zap_shader_region: gpu@8f200000 {
+ compatible = "shared-dma-pool";
+ reg = <0x0 0x90b00000 0x0 0xa00000>;
+ no-map;
};
-
- CPU1: cpu@1 {
- device_type = "cpu";
- compatible = "qcom,kryo";
- reg = <0x0 0x1>;
- enable-method = "psci";
- next-level-cache = <&L2_0>;
- };
-
- CPU2: cpu@100 {
- device_type = "cpu";
- compatible = "qcom,kryo";
- reg = <0x0 0x100>;
- enable-method = "psci";
- next-level-cache = <&L2_1>;
- L2_1: l2-cache {
- compatible = "cache";
- cache-level = <2>;
- };
- };
-
- CPU3: cpu@101 {
- device_type = "cpu";
- compatible = "qcom,kryo";
- reg = <0x0 0x101>;
- enable-method = "psci";
- next-level-cache = <&L2_1>;
- };
-
- cpu-map {
- cluster0 {
- core0 {
- cpu = <&CPU0>;
- };
-
- core1 {
- cpu = <&CPU1>;
- };
- };
-
- cluster1 {
- core0 {
- cpu = <&CPU2>;
- };
-
- core1 {
- cpu = <&CPU3>;
- };
- };
- };
- };
-
- thermal-zones {
- cpu-thermal0 {
- polling-delay-passive = <250>;
- polling-delay = <1000>;
-
- thermal-sensors = <&tsens0 3>;
-
- trips {
- cpu_alert0: trip0 {
- temperature = <75000>;
- hysteresis = <2000>;
- type = "passive";
- };
-
- cpu_crit0: trip1 {
- temperature = <110000>;
- hysteresis = <2000>;
- type = "critical";
- };
- };
- };
-
- cpu-thermal1 {
- polling-delay-passive = <250>;
- polling-delay = <1000>;
-
- thermal-sensors = <&tsens0 5>;
-
- trips {
- cpu_alert1: trip0 {
- temperature = <75000>;
- hysteresis = <2000>;
- type = "passive";
- };
-
- cpu_crit1: trip1 {
- temperature = <110000>;
- hysteresis = <2000>;
- type = "critical";
- };
- };
- };
-
- cpu-thermal2 {
- polling-delay-passive = <250>;
- polling-delay = <1000>;
-
- thermal-sensors = <&tsens0 8>;
-
- trips {
- cpu_alert2: trip0 {
- temperature = <75000>;
- hysteresis = <2000>;
- type = "passive";
- };
-
- cpu_crit2: trip1 {
- temperature = <110000>;
- hysteresis = <2000>;
- type = "critical";
- };
- };
- };
-
- cpu-thermal3 {
- polling-delay-passive = <250>;
- polling-delay = <1000>;
-
- thermal-sensors = <&tsens0 10>;
-
- trips {
- cpu_alert3: trip0 {
- temperature = <75000>;
- hysteresis = <2000>;
- type = "passive";
- };
-
- cpu_crit3: trip1 {
- temperature = <110000>;
- hysteresis = <2000>;
- type = "critical";
- };
- };
- };
- };
-
- timer {
- compatible = "arm,armv8-timer";
- interrupts = <GIC_PPI 13 IRQ_TYPE_LEVEL_LOW>,
- <GIC_PPI 14 IRQ_TYPE_LEVEL_LOW>,
- <GIC_PPI 11 IRQ_TYPE_LEVEL_LOW>,
- <GIC_PPI 10 IRQ_TYPE_LEVEL_LOW>;
- };
-
- clocks {
- xo_board: xo_board {
- compatible = "fixed-clock";
- #clock-cells = <0>;
- clock-frequency = <19200000>;
- clock-output-names = "xo_board";
- };
-
- sleep_clk: sleep_clk {
- compatible = "fixed-clock";
- #clock-cells = <0>;
- clock-frequency = <32764>;
- clock-output-names = "sleep_clk";
- };
- };
-
- psci {
- compatible = "arm,psci-1.0";
- method = "smc";
- };
-
- firmware {
- scm {
- compatible = "qcom,scm-msm8996";
-
- qcom,dload-mode = <&tcsr 0x13000>;
- };
- };
-
- tcsr_mutex: hwlock {
- compatible = "qcom,tcsr-mutex";
- syscon = <&tcsr_mutex_regs 0 0x1000>;
- #hwlock-cells = <1>;
- };
-
- smem {
- compatible = "qcom,smem";
- memory-region = <&smem_mem>;
- hwlocks = <&tcsr_mutex 3>;
};
rpm-glink {
@@ -299,7 +216,7 @@
mboxes = <&apcs_glb 0>;
- rpm_requests {
+ rpm_requests: rpm-requests {
compatible = "qcom,rpm-msm8996";
qcom,glink-channels = "rpm_requests";
@@ -308,56 +225,116 @@
#clock-cells = <1>;
};
- pm8994-regulators {
- compatible = "qcom,rpm-pm8994-regulators";
+ rpmpd: power-controller {
+ compatible = "qcom,msm8996-rpmpd";
+ #power-domain-cells = <1>;
+ operating-points-v2 = <&rpmpd_opp_table>;
- pm8994_s1: s1 {};
- pm8994_s2: s2 {};
- pm8994_s3: s3 {};
- pm8994_s4: s4 {};
- pm8994_s5: s5 {};
- pm8994_s6: s6 {};
- pm8994_s7: s7 {};
- pm8994_s8: s8 {};
- pm8994_s9: s9 {};
- pm8994_s10: s10 {};
- pm8994_s11: s11 {};
- pm8994_s12: s12 {};
+ rpmpd_opp_table: opp-table {
+ compatible = "operating-points-v2";
- pm8994_l1: l1 {};
- pm8994_l2: l2 {};
- pm8994_l3: l3 {};
- pm8994_l4: l4 {};
- pm8994_l5: l5 {};
- pm8994_l6: l6 {};
- pm8994_l7: l7 {};
- pm8994_l8: l8 {};
- pm8994_l9: l9 {};
- pm8994_l10: l10 {};
- pm8994_l11: l11 {};
- pm8994_l12: l12 {};
- pm8994_l13: l13 {};
- pm8994_l14: l14 {};
- pm8994_l15: l15 {};
- pm8994_l16: l16 {};
- pm8994_l17: l17 {};
- pm8994_l18: l18 {};
- pm8994_l19: l19 {};
- pm8994_l20: l20 {};
- pm8994_l21: l21 {};
- pm8994_l22: l22 {};
- pm8994_l23: l23 {};
- pm8994_l24: l24 {};
- pm8994_l25: l25 {};
- pm8994_l26: l26 {};
- pm8994_l27: l27 {};
- pm8994_l28: l28 {};
- pm8994_l29: l29 {};
- pm8994_l30: l30 {};
- pm8994_l31: l31 {};
- pm8994_l32: l32 {};
+ rpmpd_opp1: opp1 {
+ opp-level = <1>;
+ };
+
+ rpmpd_opp2: opp2 {
+ opp-level = <2>;
+ };
+
+ rpmpd_opp3: opp3 {
+ opp-level = <3>;
+ };
+
+ rpmpd_opp4: opp4 {
+ opp-level = <4>;
+ };
+
+ rpmpd_opp5: opp5 {
+ opp-level = <5>;
+ };
+
+ rpmpd_opp6: opp6 {
+ opp-level = <6>;
+ };
+ };
};
+ };
+ };
+ smem {
+ compatible = "qcom,smem";
+ memory-region = <&smem_mem>;
+ hwlocks = <&tcsr_mutex 3>;
+ };
+
+ smp2p-adsp {
+ compatible = "qcom,smp2p";
+ qcom,smem = <443>, <429>;
+
+ interrupts = <0 158 IRQ_TYPE_EDGE_RISING>;
+
+ mboxes = <&apcs_glb 10>;
+
+ qcom,local-pid = <0>;
+ qcom,remote-pid = <2>;
+
+ smp2p_adsp_out: master-kernel {
+ qcom,entry-name = "master-kernel";
+ #qcom,smem-state-cells = <1>;
+ };
+
+ smp2p_adsp_in: slave-kernel {
+ qcom,entry-name = "slave-kernel";
+
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ };
+ };
+
+ smp2p-modem {
+ compatible = "qcom,smp2p";
+ qcom,smem = <435>, <428>;
+
+ interrupts = <GIC_SPI 451 IRQ_TYPE_EDGE_RISING>;
+
+ mboxes = <&apcs_glb 14>;
+
+ qcom,local-pid = <0>;
+ qcom,remote-pid = <1>;
+
+ modem_smp2p_out: master-kernel {
+ qcom,entry-name = "master-kernel";
+ #qcom,smem-state-cells = <1>;
+ };
+
+ modem_smp2p_in: slave-kernel {
+ qcom,entry-name = "slave-kernel";
+
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ };
+ };
+
+ smp2p-slpi {
+ compatible = "qcom,smp2p";
+ qcom,smem = <481>, <430>;
+
+ interrupts = <GIC_SPI 178 IRQ_TYPE_EDGE_RISING>;
+
+ mboxes = <&apcs_glb 26>;
+
+ qcom,local-pid = <0>;
+ qcom,remote-pid = <3>;
+
+ smp2p_slpi_in: slave-kernel {
+ qcom,entry-name = "slave-kernel";
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ };
+
+ smp2p_slpi_out: master-kernel {
+ qcom,entry-name = "master-kernel";
+ #qcom,smem-state-cells = <1>;
};
};
@@ -367,58 +344,97 @@
ranges = <0 0 0 0xffffffff>;
compatible = "simple-bus";
+ pcie_phy: phy@34000 {
+ compatible = "qcom,msm8996-qmp-pcie-phy";
+ reg = <0x00034000 0x488>;
+ #clock-cells = <1>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges;
+
+ clocks = <&gcc GCC_PCIE_PHY_AUX_CLK>,
+ <&gcc GCC_PCIE_PHY_CFG_AHB_CLK>,
+ <&gcc GCC_PCIE_CLKREF_CLK>;
+ clock-names = "aux", "cfg_ahb", "ref";
+
+ resets = <&gcc GCC_PCIE_PHY_BCR>,
+ <&gcc GCC_PCIE_PHY_COM_BCR>,
+ <&gcc GCC_PCIE_PHY_COM_NOCSR_BCR>;
+ reset-names = "phy", "common", "cfg";
+ status = "disabled";
+
+ pciephy_0: lane@35000 {
+ reg = <0x00035000 0x130>,
+ <0x00035200 0x200>,
+ <0x00035400 0x1dc>;
+ #phy-cells = <0>;
+
+ clock-output-names = "pcie_0_pipe_clk_src";
+ clocks = <&gcc GCC_PCIE_0_PIPE_CLK>;
+ clock-names = "pipe0";
+ resets = <&gcc GCC_PCIE_0_PHY_BCR>;
+ reset-names = "lane0";
+ };
+
+ pciephy_1: lane@36000 {
+ reg = <0x00036000 0x130>,
+ <0x00036200 0x200>,
+ <0x00036400 0x1dc>;
+ #phy-cells = <0>;
+
+ clock-output-names = "pcie_1_pipe_clk_src";
+ clocks = <&gcc GCC_PCIE_1_PIPE_CLK>;
+ clock-names = "pipe1";
+ resets = <&gcc GCC_PCIE_1_PHY_BCR>;
+ reset-names = "lane1";
+ };
+
+ pciephy_2: lane@37000 {
+ reg = <0x00037000 0x130>,
+ <0x00037200 0x200>,
+ <0x00037400 0x1dc>;
+ #phy-cells = <0>;
+
+ clock-output-names = "pcie_2_pipe_clk_src";
+ clocks = <&gcc GCC_PCIE_2_PIPE_CLK>;
+ clock-names = "pipe2";
+ resets = <&gcc GCC_PCIE_2_PHY_BCR>;
+ reset-names = "lane2";
+ };
+ };
+
rpm_msg_ram: memory@68000 {
compatible = "qcom,rpm-msg-ram";
- reg = <0x68000 0x6000>;
+ reg = <0x00068000 0x6000>;
};
- tcsr_mutex_regs: syscon@740000 {
- compatible = "syscon";
- reg = <0x740000 0x20000>;
+ qfprom@74000 {
+ compatible = "qcom,qfprom";
+ reg = <0x00074000 0x8ff>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ qusb2p_hstx_trim: hstx_trim@24e {
+ reg = <0x24e 0x2>;
+ bits = <5 4>;
+ };
+
+ qusb2s_hstx_trim: hstx_trim@24f {
+ reg = <0x24f 0x1>;
+ bits = <1 4>;
+ };
+
+ gpu_speed_bin: gpu_speed_bin@133 {
+ reg = <0x133 0x1>;
+ bits = <5 3>;
+ };
};
- tsens0: thermal-sensor@4a9000 {
- compatible = "qcom,msm8996-tsens";
- reg = <0x4a9000 0x1000>, /* TM */
- <0x4a8000 0x1000>; /* SROT */
- #qcom,sensors = <13>;
- #thermal-sensor-cells = <1>;
- };
-
- tsens1: thermal-sensor@4ad000 {
- compatible = "qcom,msm8996-tsens";
- reg = <0x4ad000 0x1000>, /* TM */
- <0x4ac000 0x1000>; /* SROT */
- #qcom,sensors = <8>;
- #thermal-sensor-cells = <1>;
- };
-
- tcsr: syscon@7a0000 {
- compatible = "qcom,tcsr-msm8996", "syscon";
- reg = <0x7a0000 0x18000>;
- };
-
- intc: interrupt-controller@9bc0000 {
- compatible = "qcom,msm8996-gic-v3", "arm,gic-v3";
- #interrupt-cells = <3>;
- interrupt-controller;
- #redistributor-regions = <1>;
- redistributor-stride = <0x0 0x40000>;
- reg = <0x09bc0000 0x10000>,
- <0x09c00000 0x100000>;
- interrupts = <GIC_PPI 9 IRQ_TYPE_LEVEL_HIGH>;
- };
-
- apcs: syscon@9820000 {
- compatible = "syscon";
- reg = <0x9820000 0x1000>;
- };
-
- apcs_glb: mailbox@9820000 {
- compatible = "qcom,msm8996-apcs-hmss-global";
- reg = <0x9820000 0x1000>;
-
- #mbox-cells = <1>;
+ rng: rng@83000 {
+ compatible = "qcom,prng-ee";
+ reg = <0x00083000 0x1000>;
+ clocks = <&gcc GCC_PRNG_AHB_CLK>;
+ clock-names = "core";
};
gcc: clock-controller@300000 {
@@ -426,14 +442,1417 @@
#clock-cells = <1>;
#reset-cells = <1>;
#power-domain-cells = <1>;
- reg = <0x300000 0x90000>;
+ reg = <0x00300000 0x90000>;
+
+ clocks = <&rpmcc RPM_SMD_LN_BB_CLK>;
+ clock-names = "cxo2";
};
+ tsens0: thermal-sensor@4a9000 {
+ compatible = "qcom,msm8996-tsens", "qcom,tsens-v2";
+ reg = <0x004a9000 0x1000>, /* TM */
+ <0x004a8000 0x1000>; /* SROT */
+ #qcom,sensors = <13>;
+ interrupts = <GIC_SPI 458 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 445 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-names = "uplow", "critical";
+ #thermal-sensor-cells = <1>;
+ };
+
+ tsens1: thermal-sensor@4ad000 {
+ compatible = "qcom,msm8996-tsens", "qcom,tsens-v2";
+ reg = <0x004ad000 0x1000>, /* TM */
+ <0x004ac000 0x1000>; /* SROT */
+ #qcom,sensors = <8>;
+ interrupts = <GIC_SPI 184 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 430 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-names = "uplow", "critical";
+ #thermal-sensor-cells = <1>;
+ };
+
+ tcsr_mutex_regs: syscon@740000 {
+ compatible = "syscon";
+ reg = <0x00740000 0x20000>;
+ };
+
+ tcsr: syscon@7a0000 {
+ compatible = "qcom,tcsr-msm8996", "syscon";
+ reg = <0x007a0000 0x18000>;
+ };
+
+ mmcc: clock-controller@8c0000 {
+ compatible = "qcom,mmcc-msm8996";
+ #clock-cells = <1>;
+ #reset-cells = <1>;
+ #power-domain-cells = <1>;
+ reg = <0x008c0000 0x40000>;
+ assigned-clocks = <&mmcc MMPLL9_PLL>,
+ <&mmcc MMPLL1_PLL>,
+ <&mmcc MMPLL3_PLL>,
+ <&mmcc MMPLL4_PLL>,
+ <&mmcc MMPLL5_PLL>;
+ assigned-clock-rates = <624000000>,
+ <810000000>,
+ <980000000>,
+ <960000000>,
+ <825000000>;
+ };
+
+ mdss: mdss@900000 {
+ compatible = "qcom,mdss";
+
+ reg = <0x00900000 0x1000>,
+ <0x009b0000 0x1040>,
+ <0x009b8000 0x1040>;
+ reg-names = "mdss_phys",
+ "vbif_phys",
+ "vbif_nrt_phys";
+
+ power-domains = <&mmcc MDSS_GDSC>;
+ interrupts = <GIC_SPI 83 IRQ_TYPE_LEVEL_HIGH>;
+
+ interrupt-controller;
+ #interrupt-cells = <1>;
+
+ clocks = <&mmcc MDSS_AHB_CLK>;
+ clock-names = "iface";
+
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges;
+
+ mdp: mdp@901000 {
+ compatible = "qcom,mdp5";
+ reg = <0x00901000 0x90000>;
+ reg-names = "mdp_phys";
+
+ interrupt-parent = <&mdss>;
+ interrupts = <0 IRQ_TYPE_LEVEL_HIGH>;
+
+ clocks = <&mmcc MDSS_AHB_CLK>,
+ <&mmcc MDSS_AXI_CLK>,
+ <&mmcc MDSS_MDP_CLK>,
+ <&mmcc SMMU_MDP_AXI_CLK>,
+ <&mmcc MDSS_VSYNC_CLK>;
+ clock-names = "iface",
+ "bus",
+ "core",
+ "iommu",
+ "vsync";
+
+ iommus = <&mdp_smmu 0>;
+
+ ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ port@0 {
+ reg = <0>;
+ mdp5_intf3_out: endpoint {
+ remote-endpoint = <&hdmi_in>;
+ };
+ };
+ };
+ };
+
+ hdmi: hdmi-tx@9a0000 {
+ compatible = "qcom,hdmi-tx-8996";
+ reg = <0x009a0000 0x50c>,
+ <0x00070000 0x6158>,
+ <0x009e0000 0xfff>;
+ reg-names = "core_physical",
+ "qfprom_physical",
+ "hdcp_physical";
+
+ interrupt-parent = <&mdss>;
+ interrupts = <8 IRQ_TYPE_LEVEL_HIGH>;
+
+ clocks = <&mmcc MDSS_MDP_CLK>,
+ <&mmcc MDSS_AHB_CLK>,
+ <&mmcc MDSS_HDMI_CLK>,
+ <&mmcc MDSS_HDMI_AHB_CLK>,
+ <&mmcc MDSS_EXTPCLK_CLK>;
+ clock-names =
+ "mdp_core",
+ "iface",
+ "core",
+ "alt_iface",
+ "extp";
+
+ phys = <&hdmi_phy>;
+ phy-names = "hdmi_phy";
+ #sound-dai-cells = <1>;
+
+ ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ port@0 {
+ reg = <0>;
+ hdmi_in: endpoint {
+ remote-endpoint = <&mdp5_intf3_out>;
+ };
+ };
+ };
+ };
+
+ hdmi_phy: hdmi-phy@9a0600 {
+ #phy-cells = <0>;
+ compatible = "qcom,hdmi-phy-8996";
+ reg = <0x009a0600 0x1c4>,
+ <0x009a0a00 0x124>,
+ <0x009a0c00 0x124>,
+ <0x009a0e00 0x124>,
+ <0x009a1000 0x124>,
+ <0x009a1200 0x0c8>;
+ reg-names = "hdmi_pll",
+ "hdmi_tx_l0",
+ "hdmi_tx_l1",
+ "hdmi_tx_l2",
+ "hdmi_tx_l3",
+ "hdmi_phy";
+
+ clocks = <&mmcc MDSS_AHB_CLK>,
+ <&gcc GCC_HDMI_CLKREF_CLK>;
+ clock-names = "iface",
+ "ref";
+ };
+ };
+ gpu@b00000 {
+ compatible = "qcom,adreno-530.2", "qcom,adreno";
+ #stream-id-cells = <16>;
+
+ reg = <0x00b00000 0x3f000>;
+ reg-names = "kgsl_3d0_reg_memory";
+
+ interrupts = <0 300 IRQ_TYPE_LEVEL_HIGH>;
+
+ clocks = <&mmcc GPU_GX_GFX3D_CLK>,
+ <&mmcc GPU_AHB_CLK>,
+ <&mmcc GPU_GX_RBBMTIMER_CLK>,
+ <&gcc GCC_BIMC_GFX_CLK>,
+ <&gcc GCC_MMSS_BIMC_GFX_CLK>;
+
+ clock-names = "core",
+ "iface",
+ "rbbmtimer",
+ "mem",
+ "mem_iface";
+
+ power-domains = <&mmcc GPU_GX_GDSC>;
+ iommus = <&adreno_smmu 0>;
+
+ nvmem-cells = <&gpu_speed_bin>;
+ nvmem-cell-names = "speed_bin";
+
+ operating-points-v2 = <&gpu_opp_table>;
+
+ gpu_opp_table: opp-table {
+ compatible ="operating-points-v2";
+
+ /*
+ * 624Mhz is only available on speed bins 0 and 3.
+ * 560Mhz is only available on speed bins 0, 2 and 3.
+ * All the rest are available on all bins of the hardware.
+ */
+ opp-624000000 {
+ opp-hz = /bits/ 64 <624000000>;
+ opp-supported-hw = <0x09>;
+ };
+ opp-560000000 {
+ opp-hz = /bits/ 64 <560000000>;
+ opp-supported-hw = <0x0d>;
+ };
+ opp-510000000 {
+ opp-hz = /bits/ 64 <510000000>;
+ opp-supported-hw = <0xFF>;
+ };
+ opp-401800000 {
+ opp-hz = /bits/ 64 <401800000>;
+ opp-supported-hw = <0xFF>;
+ };
+ opp-315000000 {
+ opp-hz = /bits/ 64 <315000000>;
+ opp-supported-hw = <0xFF>;
+ };
+ opp-214000000 {
+ opp-hz = /bits/ 64 <214000000>;
+ opp-supported-hw = <0xFF>;
+ };
+ opp-133000000 {
+ opp-hz = /bits/ 64 <133000000>;
+ opp-supported-hw = <0xFF>;
+ };
+ };
+
+ zap-shader {
+ memory-region = <&zap_shader_region>;
+ };
+ };
+
+ msmgpio: pinctrl@1010000 {
+ compatible = "qcom,msm8996-pinctrl";
+ reg = <0x01010000 0x300000>;
+ interrupts = <GIC_SPI 208 IRQ_TYPE_LEVEL_HIGH>;
+ gpio-controller;
+ gpio-ranges = <&msmgpio 0 0 150>;
+ #gpio-cells = <2>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ };
+
+ spmi_bus: qcom,spmi@400f000 {
+ compatible = "qcom,spmi-pmic-arb";
+ reg = <0x0400f000 0x1000>,
+ <0x04400000 0x800000>,
+ <0x04c00000 0x800000>,
+ <0x05800000 0x200000>,
+ <0x0400a000 0x002100>;
+ reg-names = "core", "chnls", "obsrvr", "intr", "cnfg";
+ interrupt-names = "periph_irq";
+ interrupts = <GIC_SPI 326 IRQ_TYPE_LEVEL_HIGH>;
+ qcom,ee = <0>;
+ qcom,channel = <0>;
+ #address-cells = <2>;
+ #size-cells = <0>;
+ interrupt-controller;
+ #interrupt-cells = <4>;
+ };
+
+ agnoc@0 {
+ power-domains = <&gcc AGGRE0_NOC_GDSC>;
+ compatible = "simple-pm-bus";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges;
+
+ pcie0: pcie@600000 {
+ compatible = "qcom,pcie-msm8996", "snps,dw-pcie";
+ status = "disabled";
+ power-domains = <&gcc PCIE0_GDSC>;
+ bus-range = <0x00 0xff>;
+ num-lanes = <1>;
+
+ reg = <0x00600000 0x2000>,
+ <0x0c000000 0xf1d>,
+ <0x0c000f20 0xa8>,
+ <0x0c100000 0x100000>;
+ reg-names = "parf", "dbi", "elbi","config";
+
+ phys = <&pciephy_0>;
+ phy-names = "pciephy";
+
+ #address-cells = <3>;
+ #size-cells = <2>;
+ ranges = <0x01000000 0x0 0x00000000 0x0c200000 0x0 0x100000>,
+ <0x02000000 0x0 0x0c300000 0x0c300000 0x0 0xd00000>;
+
+ interrupts = <GIC_SPI 405 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-names = "msi";
+ #interrupt-cells = <1>;
+ interrupt-map-mask = <0 0 0 0x7>;
+ interrupt-map = <0 0 0 1 &intc 0 244 IRQ_TYPE_LEVEL_HIGH>, /* int_a */
+ <0 0 0 2 &intc 0 245 IRQ_TYPE_LEVEL_HIGH>, /* int_b */
+ <0 0 0 3 &intc 0 247 IRQ_TYPE_LEVEL_HIGH>, /* int_c */
+ <0 0 0 4 &intc 0 248 IRQ_TYPE_LEVEL_HIGH>; /* int_d */
+
+ pinctrl-names = "default", "sleep";
+ pinctrl-0 = <&pcie0_clkreq_default &pcie0_perst_default &pcie0_wake_default>;
+ pinctrl-1 = <&pcie0_clkreq_sleep &pcie0_perst_default &pcie0_wake_sleep>;
+
+ linux,pci-domain = <0>;
+
+ clocks = <&gcc GCC_PCIE_0_PIPE_CLK>,
+ <&gcc GCC_PCIE_0_AUX_CLK>,
+ <&gcc GCC_PCIE_0_CFG_AHB_CLK>,
+ <&gcc GCC_PCIE_0_MSTR_AXI_CLK>,
+ <&gcc GCC_PCIE_0_SLV_AXI_CLK>;
+
+ clock-names = "pipe",
+ "aux",
+ "cfg",
+ "bus_master",
+ "bus_slave";
+
+ };
+
+ pcie1: pcie@608000 {
+ compatible = "qcom,pcie-msm8996", "snps,dw-pcie";
+ power-domains = <&gcc PCIE1_GDSC>;
+ bus-range = <0x00 0xff>;
+ num-lanes = <1>;
+
+ status = "disabled";
+
+ reg = <0x00608000 0x2000>,
+ <0x0d000000 0xf1d>,
+ <0x0d000f20 0xa8>,
+ <0x0d100000 0x100000>;
+
+ reg-names = "parf", "dbi", "elbi","config";
+
+ phys = <&pciephy_1>;
+ phy-names = "pciephy";
+
+ #address-cells = <3>;
+ #size-cells = <2>;
+ ranges = <0x01000000 0x0 0x00000000 0x0d200000 0x0 0x100000>,
+ <0x02000000 0x0 0x0d300000 0x0d300000 0x0 0xd00000>;
+
+ interrupts = <GIC_SPI 413 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-names = "msi";
+ #interrupt-cells = <1>;
+ interrupt-map-mask = <0 0 0 0x7>;
+ interrupt-map = <0 0 0 1 &intc 0 272 IRQ_TYPE_LEVEL_HIGH>, /* int_a */
+ <0 0 0 2 &intc 0 273 IRQ_TYPE_LEVEL_HIGH>, /* int_b */
+ <0 0 0 3 &intc 0 274 IRQ_TYPE_LEVEL_HIGH>, /* int_c */
+ <0 0 0 4 &intc 0 275 IRQ_TYPE_LEVEL_HIGH>; /* int_d */
+
+ pinctrl-names = "default", "sleep";
+ pinctrl-0 = <&pcie1_clkreq_default &pcie1_perst_default &pcie1_wake_default>;
+ pinctrl-1 = <&pcie1_clkreq_sleep &pcie1_perst_default &pcie1_wake_sleep>;
+
+ linux,pci-domain = <1>;
+
+ clocks = <&gcc GCC_PCIE_1_PIPE_CLK>,
+ <&gcc GCC_PCIE_1_AUX_CLK>,
+ <&gcc GCC_PCIE_1_CFG_AHB_CLK>,
+ <&gcc GCC_PCIE_1_MSTR_AXI_CLK>,
+ <&gcc GCC_PCIE_1_SLV_AXI_CLK>;
+
+ clock-names = "pipe",
+ "aux",
+ "cfg",
+ "bus_master",
+ "bus_slave";
+ };
+
+ pcie2: pcie@610000 {
+ compatible = "qcom,pcie-msm8996", "snps,dw-pcie";
+ power-domains = <&gcc PCIE2_GDSC>;
+ bus-range = <0x00 0xff>;
+ num-lanes = <1>;
+ status = "disabled";
+ reg = <0x00610000 0x2000>,
+ <0x0e000000 0xf1d>,
+ <0x0e000f20 0xa8>,
+ <0x0e100000 0x100000>;
+
+ reg-names = "parf", "dbi", "elbi","config";
+
+ phys = <&pciephy_2>;
+ phy-names = "pciephy";
+
+ #address-cells = <3>;
+ #size-cells = <2>;
+ ranges = <0x01000000 0x0 0x00000000 0x0e200000 0x0 0x100000>,
+ <0x02000000 0x0 0x0e300000 0x0e300000 0x0 0x1d00000>;
+
+ device_type = "pci";
+
+ interrupts = <GIC_SPI 421 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-names = "msi";
+ #interrupt-cells = <1>;
+ interrupt-map-mask = <0 0 0 0x7>;
+ interrupt-map = <0 0 0 1 &intc 0 142 IRQ_TYPE_LEVEL_HIGH>, /* int_a */
+ <0 0 0 2 &intc 0 143 IRQ_TYPE_LEVEL_HIGH>, /* int_b */
+ <0 0 0 3 &intc 0 144 IRQ_TYPE_LEVEL_HIGH>, /* int_c */
+ <0 0 0 4 &intc 0 145 IRQ_TYPE_LEVEL_HIGH>; /* int_d */
+
+ pinctrl-names = "default", "sleep";
+ pinctrl-0 = <&pcie2_clkreq_default &pcie2_perst_default &pcie2_wake_default>;
+ pinctrl-1 = <&pcie2_clkreq_sleep &pcie2_perst_default &pcie2_wake_sleep >;
+
+ linux,pci-domain = <2>;
+ clocks = <&gcc GCC_PCIE_2_PIPE_CLK>,
+ <&gcc GCC_PCIE_2_AUX_CLK>,
+ <&gcc GCC_PCIE_2_CFG_AHB_CLK>,
+ <&gcc GCC_PCIE_2_MSTR_AXI_CLK>,
+ <&gcc GCC_PCIE_2_SLV_AXI_CLK>;
+
+ clock-names = "pipe",
+ "aux",
+ "cfg",
+ "bus_master",
+ "bus_slave";
+ };
+ };
+
+ ufshc: ufshc@624000 {
+ compatible = "qcom,ufshc";
+ reg = <0x00624000 0x2500>;
+ interrupts = <GIC_SPI 265 IRQ_TYPE_LEVEL_HIGH>;
+
+ phys = <&ufsphy_lane>;
+ phy-names = "ufsphy";
+
+ power-domains = <&gcc UFS_GDSC>;
+
+ clock-names =
+ "core_clk_src",
+ "core_clk",
+ "bus_clk",
+ "bus_aggr_clk",
+ "iface_clk",
+ "core_clk_unipro_src",
+ "core_clk_unipro",
+ "core_clk_ice",
+ "ref_clk",
+ "tx_lane0_sync_clk",
+ "rx_lane0_sync_clk";
+ clocks =
+ <&gcc UFS_AXI_CLK_SRC>,
+ <&gcc GCC_UFS_AXI_CLK>,
+ <&gcc GCC_SYS_NOC_UFS_AXI_CLK>,
+ <&gcc GCC_AGGRE2_UFS_AXI_CLK>,
+ <&gcc GCC_UFS_AHB_CLK>,
+ <&gcc UFS_ICE_CORE_CLK_SRC>,
+ <&gcc GCC_UFS_UNIPRO_CORE_CLK>,
+ <&gcc GCC_UFS_ICE_CORE_CLK>,
+ <&rpmcc RPM_SMD_LN_BB_CLK>,
+ <&gcc GCC_UFS_TX_SYMBOL_0_CLK>,
+ <&gcc GCC_UFS_RX_SYMBOL_0_CLK>;
+ freq-table-hz =
+ <100000000 200000000>,
+ <0 0>,
+ <0 0>,
+ <0 0>,
+ <0 0>,
+ <150000000 300000000>,
+ <0 0>,
+ <0 0>,
+ <0 0>,
+ <0 0>,
+ <0 0>;
+
+ lanes-per-direction = <1>;
+ #reset-cells = <1>;
+ status = "disabled";
+
+ ufs_variant {
+ compatible = "qcom,ufs_variant";
+ };
+ };
+
+ ufsphy: phy@627000 {
+ compatible = "qcom,msm8996-qmp-ufs-phy";
+ reg = <0x00627000 0x1c4>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges;
+
+ clocks = <&gcc GCC_UFS_CLKREF_CLK>;
+ clock-names = "ref";
+
+ resets = <&ufshc 0>;
+ reset-names = "ufsphy";
+ status = "disabled";
+
+ ufsphy_lane: lanes@627400 {
+ reg = <0x627400 0x12c>,
+ <0x627600 0x200>,
+ <0x627c00 0x1b4>;
+ #phy-cells = <0>;
+ };
+ };
+
+ camss: camss@a34000 {
+ compatible = "qcom,msm8996-camss";
+ reg = <0x00a34000 0x1000>,
+ <0x00a00030 0x4>,
+ <0x00a35000 0x1000>,
+ <0x00a00038 0x4>,
+ <0x00a36000 0x1000>,
+ <0x00a00040 0x4>,
+ <0x00a30000 0x100>,
+ <0x00a30400 0x100>,
+ <0x00a30800 0x100>,
+ <0x00a30c00 0x100>,
+ <0x00a31000 0x500>,
+ <0x00a00020 0x10>,
+ <0x00a10000 0x1000>,
+ <0x00a14000 0x1000>;
+ reg-names = "csiphy0",
+ "csiphy0_clk_mux",
+ "csiphy1",
+ "csiphy1_clk_mux",
+ "csiphy2",
+ "csiphy2_clk_mux",
+ "csid0",
+ "csid1",
+ "csid2",
+ "csid3",
+ "ispif",
+ "csi_clk_mux",
+ "vfe0",
+ "vfe1";
+ interrupts = <GIC_SPI 78 IRQ_TYPE_EDGE_RISING>,
+ <GIC_SPI 79 IRQ_TYPE_EDGE_RISING>,
+ <GIC_SPI 80 IRQ_TYPE_EDGE_RISING>,
+ <GIC_SPI 296 IRQ_TYPE_EDGE_RISING>,
+ <GIC_SPI 297 IRQ_TYPE_EDGE_RISING>,
+ <GIC_SPI 298 IRQ_TYPE_EDGE_RISING>,
+ <GIC_SPI 299 IRQ_TYPE_EDGE_RISING>,
+ <GIC_SPI 309 IRQ_TYPE_EDGE_RISING>,
+ <GIC_SPI 314 IRQ_TYPE_EDGE_RISING>,
+ <GIC_SPI 315 IRQ_TYPE_EDGE_RISING>;
+ interrupt-names = "csiphy0",
+ "csiphy1",
+ "csiphy2",
+ "csid0",
+ "csid1",
+ "csid2",
+ "csid3",
+ "ispif",
+ "vfe0",
+ "vfe1";
+ power-domains = <&mmcc VFE0_GDSC>,
+ <&mmcc VFE1_GDSC>;
+ clocks = <&mmcc CAMSS_TOP_AHB_CLK>,
+ <&mmcc CAMSS_ISPIF_AHB_CLK>,
+ <&mmcc CAMSS_CSI0PHYTIMER_CLK>,
+ <&mmcc CAMSS_CSI1PHYTIMER_CLK>,
+ <&mmcc CAMSS_CSI2PHYTIMER_CLK>,
+ <&mmcc CAMSS_CSI0_AHB_CLK>,
+ <&mmcc CAMSS_CSI0_CLK>,
+ <&mmcc CAMSS_CSI0PHY_CLK>,
+ <&mmcc CAMSS_CSI0PIX_CLK>,
+ <&mmcc CAMSS_CSI0RDI_CLK>,
+ <&mmcc CAMSS_CSI1_AHB_CLK>,
+ <&mmcc CAMSS_CSI1_CLK>,
+ <&mmcc CAMSS_CSI1PHY_CLK>,
+ <&mmcc CAMSS_CSI1PIX_CLK>,
+ <&mmcc CAMSS_CSI1RDI_CLK>,
+ <&mmcc CAMSS_CSI2_AHB_CLK>,
+ <&mmcc CAMSS_CSI2_CLK>,
+ <&mmcc CAMSS_CSI2PHY_CLK>,
+ <&mmcc CAMSS_CSI2PIX_CLK>,
+ <&mmcc CAMSS_CSI2RDI_CLK>,
+ <&mmcc CAMSS_CSI3_AHB_CLK>,
+ <&mmcc CAMSS_CSI3_CLK>,
+ <&mmcc CAMSS_CSI3PHY_CLK>,
+ <&mmcc CAMSS_CSI3PIX_CLK>,
+ <&mmcc CAMSS_CSI3RDI_CLK>,
+ <&mmcc CAMSS_AHB_CLK>,
+ <&mmcc CAMSS_VFE0_CLK>,
+ <&mmcc CAMSS_CSI_VFE0_CLK>,
+ <&mmcc CAMSS_VFE0_AHB_CLK>,
+ <&mmcc CAMSS_VFE0_STREAM_CLK>,
+ <&mmcc CAMSS_VFE1_CLK>,
+ <&mmcc CAMSS_CSI_VFE1_CLK>,
+ <&mmcc CAMSS_VFE1_AHB_CLK>,
+ <&mmcc CAMSS_VFE1_STREAM_CLK>,
+ <&mmcc CAMSS_VFE_AHB_CLK>,
+ <&mmcc CAMSS_VFE_AXI_CLK>;
+ clock-names = "top_ahb",
+ "ispif_ahb",
+ "csiphy0_timer",
+ "csiphy1_timer",
+ "csiphy2_timer",
+ "csi0_ahb",
+ "csi0",
+ "csi0_phy",
+ "csi0_pix",
+ "csi0_rdi",
+ "csi1_ahb",
+ "csi1",
+ "csi1_phy",
+ "csi1_pix",
+ "csi1_rdi",
+ "csi2_ahb",
+ "csi2",
+ "csi2_phy",
+ "csi2_pix",
+ "csi2_rdi",
+ "csi3_ahb",
+ "csi3",
+ "csi3_phy",
+ "csi3_pix",
+ "csi3_rdi",
+ "ahb",
+ "vfe0",
+ "csi_vfe0",
+ "vfe0_ahb",
+ "vfe0_stream",
+ "vfe1",
+ "csi_vfe1",
+ "vfe1_ahb",
+ "vfe1_stream",
+ "vfe_ahb",
+ "vfe_axi";
+ iommus = <&vfe_smmu 0>,
+ <&vfe_smmu 1>,
+ <&vfe_smmu 2>,
+ <&vfe_smmu 3>;
+ status = "disabled";
+ ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ };
+ };
+
+ cci: cci@a0c000 {
+ compatible = "qcom,msm8996-cci";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <0xa0c000 0x1000>;
+ interrupts = <GIC_SPI 295 IRQ_TYPE_EDGE_RISING>;
+ power-domains = <&mmcc CAMSS_GDSC>;
+ clocks = <&mmcc CAMSS_TOP_AHB_CLK>,
+ <&mmcc CAMSS_CCI_AHB_CLK>,
+ <&mmcc CAMSS_CCI_CLK>,
+ <&mmcc CAMSS_AHB_CLK>;
+ clock-names = "camss_top_ahb",
+ "cci_ahb",
+ "cci",
+ "camss_ahb";
+ assigned-clocks = <&mmcc CAMSS_CCI_AHB_CLK>,
+ <&mmcc CAMSS_CCI_CLK>;
+ assigned-clock-rates = <80000000>, <37500000>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&cci0_default &cci1_default>;
+ status = "disabled";
+
+ cci_i2c0: i2c-bus@0 {
+ reg = <0>;
+ clock-frequency = <400000>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ };
+
+ cci_i2c1: i2c-bus@1 {
+ reg = <1>;
+ clock-frequency = <400000>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ };
+ };
+
+ adreno_smmu: iommu@b40000 {
+ compatible = "qcom,msm8996-smmu-v2", "qcom,smmu-v2";
+ reg = <0x00b40000 0x10000>;
+
+ #global-interrupts = <1>;
+ interrupts = <GIC_SPI 334 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 329 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 330 IRQ_TYPE_LEVEL_HIGH>;
+ #iommu-cells = <1>;
+
+ clocks = <&mmcc GPU_AHB_CLK>,
+ <&gcc GCC_MMSS_BIMC_GFX_CLK>;
+ clock-names = "iface", "bus";
+
+ power-domains = <&mmcc GPU_GDSC>;
+ };
+
+ video-codec@c00000 {
+ compatible = "qcom,msm8996-venus";
+ reg = <0x00c00000 0xff000>;
+ interrupts = <GIC_SPI 287 IRQ_TYPE_LEVEL_HIGH>;
+ power-domains = <&mmcc VENUS_GDSC>;
+ clocks = <&mmcc VIDEO_CORE_CLK>,
+ <&mmcc VIDEO_AHB_CLK>,
+ <&mmcc VIDEO_AXI_CLK>,
+ <&mmcc VIDEO_MAXI_CLK>;
+ clock-names = "core", "iface", "bus", "mbus";
+ iommus = <&venus_smmu 0x00>,
+ <&venus_smmu 0x01>,
+ <&venus_smmu 0x0a>,
+ <&venus_smmu 0x07>,
+ <&venus_smmu 0x0e>,
+ <&venus_smmu 0x0f>,
+ <&venus_smmu 0x08>,
+ <&venus_smmu 0x09>,
+ <&venus_smmu 0x0b>,
+ <&venus_smmu 0x0c>,
+ <&venus_smmu 0x0d>,
+ <&venus_smmu 0x10>,
+ <&venus_smmu 0x11>,
+ <&venus_smmu 0x21>,
+ <&venus_smmu 0x28>,
+ <&venus_smmu 0x29>,
+ <&venus_smmu 0x2b>,
+ <&venus_smmu 0x2c>,
+ <&venus_smmu 0x2d>,
+ <&venus_smmu 0x31>;
+ memory-region = <&venus_region>;
+ status = "okay";
+
+ video-decoder {
+ compatible = "venus-decoder";
+ clocks = <&mmcc VIDEO_SUBCORE0_CLK>;
+ clock-names = "core";
+ power-domains = <&mmcc VENUS_CORE0_GDSC>;
+ };
+
+ video-encoder {
+ compatible = "venus-encoder";
+ clocks = <&mmcc VIDEO_SUBCORE1_CLK>;
+ clock-names = "core";
+ power-domains = <&mmcc VENUS_CORE1_GDSC>;
+ };
+ };
+
+ mdp_smmu: iommu@d00000 {
+ compatible = "qcom,msm8996-smmu-v2", "qcom,smmu-v2";
+ reg = <0x00d00000 0x10000>;
+
+ #global-interrupts = <1>;
+ interrupts = <GIC_SPI 73 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 320 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 321 IRQ_TYPE_LEVEL_HIGH>;
+ #iommu-cells = <1>;
+ clocks = <&mmcc SMMU_MDP_AHB_CLK>,
+ <&mmcc SMMU_MDP_AXI_CLK>;
+ clock-names = "iface", "bus";
+
+ power-domains = <&mmcc MDSS_GDSC>;
+ };
+
+ venus_smmu: iommu@d40000 {
+ compatible = "qcom,msm8996-smmu-v2", "qcom,smmu-v2";
+ reg = <0x00d40000 0x20000>;
+ #global-interrupts = <1>;
+ interrupts = <GIC_SPI 286 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 335 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 336 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 337 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 338 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 339 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 340 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 341 IRQ_TYPE_LEVEL_HIGH>;
+ power-domains = <&mmcc MMAGIC_VIDEO_GDSC>;
+ clocks = <&mmcc SMMU_VIDEO_AHB_CLK>,
+ <&mmcc SMMU_VIDEO_AXI_CLK>;
+ clock-names = "iface", "bus";
+ #iommu-cells = <1>;
+ status = "okay";
+ };
+
+ vfe_smmu: iommu@da0000 {
+ compatible = "qcom,msm8996-smmu-v2", "qcom,smmu-v2";
+ reg = <0x00da0000 0x10000>;
+
+ #global-interrupts = <1>;
+ interrupts = <GIC_SPI 76 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 343 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 344 IRQ_TYPE_LEVEL_HIGH>;
+ power-domains = <&mmcc MMAGIC_CAMSS_GDSC>;
+ clocks = <&mmcc SMMU_VFE_AHB_CLK>,
+ <&mmcc SMMU_VFE_AXI_CLK>;
+ clock-names = "iface",
+ "bus";
+ #iommu-cells = <1>;
+ };
+
+ lpass_q6_smmu: iommu@1600000 {
+ compatible = "qcom,msm8996-smmu-v2", "qcom,smmu-v2";
+ reg = <0x01600000 0x20000>;
+ #iommu-cells = <1>;
+ power-domains = <&gcc HLOS1_VOTE_LPASS_CORE_GDSC>;
+
+ #global-interrupts = <1>;
+ interrupts = <GIC_SPI 404 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 226 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 393 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 394 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 395 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 396 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 397 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 398 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 399 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 400 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 401 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 402 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 403 IRQ_TYPE_LEVEL_HIGH>;
+
+ clocks = <&gcc GCC_HLOS1_VOTE_LPASS_CORE_SMMU_CLK>,
+ <&gcc GCC_HLOS1_VOTE_LPASS_ADSP_SMMU_CLK>;
+ clock-names = "iface", "bus";
+ };
+
+ stm@3002000 {
+ compatible = "arm,coresight-stm", "arm,primecell";
+ reg = <0x3002000 0x1000>,
+ <0x8280000 0x180000>;
+ reg-names = "stm-base", "stm-stimulus-base";
+
+ clocks = <&rpmcc RPM_QDSS_CLK>, <&rpmcc RPM_QDSS_A_CLK>;
+ clock-names = "apb_pclk", "atclk";
+
+ out-ports {
+ port {
+ stm_out: endpoint {
+ remote-endpoint =
+ <&funnel0_in>;
+ };
+ };
+ };
+ };
+
+ tpiu@3020000 {
+ compatible = "arm,coresight-tpiu", "arm,primecell";
+ reg = <0x3020000 0x1000>;
+
+ clocks = <&rpmcc RPM_QDSS_CLK>, <&rpmcc RPM_QDSS_A_CLK>;
+ clock-names = "apb_pclk", "atclk";
+
+ in-ports {
+ port {
+ tpiu_in: endpoint {
+ remote-endpoint =
+ <&replicator_out1>;
+ };
+ };
+ };
+ };
+
+ funnel@3021000 {
+ compatible = "arm,coresight-dynamic-funnel", "arm,primecell";
+ reg = <0x3021000 0x1000>;
+
+ clocks = <&rpmcc RPM_QDSS_CLK>, <&rpmcc RPM_QDSS_A_CLK>;
+ clock-names = "apb_pclk", "atclk";
+
+ in-ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ port@7 {
+ reg = <7>;
+ funnel0_in: endpoint {
+ remote-endpoint =
+ <&stm_out>;
+ };
+ };
+ };
+
+ out-ports {
+ port {
+ funnel0_out: endpoint {
+ remote-endpoint =
+ <&merge_funnel_in0>;
+ };
+ };
+ };
+ };
+
+ funnel@3022000 {
+ compatible = "arm,coresight-dynamic-funnel", "arm,primecell";
+ reg = <0x3022000 0x1000>;
+
+ clocks = <&rpmcc RPM_QDSS_CLK>, <&rpmcc RPM_QDSS_A_CLK>;
+ clock-names = "apb_pclk", "atclk";
+
+ in-ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ port@6 {
+ reg = <6>;
+ funnel1_in: endpoint {
+ remote-endpoint =
+ <&apss_merge_funnel_out>;
+ };
+ };
+ };
+
+ out-ports {
+ port {
+ funnel1_out: endpoint {
+ remote-endpoint =
+ <&merge_funnel_in1>;
+ };
+ };
+ };
+ };
+
+ funnel@3023000 {
+ compatible = "arm,coresight-dynamic-funnel", "arm,primecell";
+ reg = <0x3023000 0x1000>;
+
+ clocks = <&rpmcc RPM_QDSS_CLK>, <&rpmcc RPM_QDSS_A_CLK>;
+ clock-names = "apb_pclk", "atclk";
+
+
+ out-ports {
+ port {
+ funnel2_out: endpoint {
+ remote-endpoint =
+ <&merge_funnel_in2>;
+ };
+ };
+ };
+ };
+
+ funnel@3025000 {
+ compatible = "arm,coresight-dynamic-funnel", "arm,primecell";
+ reg = <0x3025000 0x1000>;
+
+ clocks = <&rpmcc RPM_QDSS_CLK>, <&rpmcc RPM_QDSS_A_CLK>;
+ clock-names = "apb_pclk", "atclk";
+
+ in-ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ port@0 {
+ reg = <0>;
+ merge_funnel_in0: endpoint {
+ remote-endpoint =
+ <&funnel0_out>;
+ };
+ };
+
+ port@1 {
+ reg = <1>;
+ merge_funnel_in1: endpoint {
+ remote-endpoint =
+ <&funnel1_out>;
+ };
+ };
+
+ port@2 {
+ reg = <2>;
+ merge_funnel_in2: endpoint {
+ remote-endpoint =
+ <&funnel2_out>;
+ };
+ };
+ };
+
+ out-ports {
+ port {
+ merge_funnel_out: endpoint {
+ remote-endpoint =
+ <&etf_in>;
+ };
+ };
+ };
+ };
+
+ replicator@3026000 {
+ compatible = "arm,coresight-dynamic-replicator", "arm,primecell";
+ reg = <0x3026000 0x1000>;
+
+ clocks = <&rpmcc RPM_QDSS_CLK>, <&rpmcc RPM_QDSS_A_CLK>;
+ clock-names = "apb_pclk", "atclk";
+
+ in-ports {
+ port {
+ replicator_in: endpoint {
+ remote-endpoint =
+ <&etf_out>;
+ };
+ };
+ };
+
+ out-ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ port@0 {
+ reg = <0>;
+ replicator_out0: endpoint {
+ remote-endpoint =
+ <&etr_in>;
+ };
+ };
+
+ port@1 {
+ reg = <1>;
+ replicator_out1: endpoint {
+ remote-endpoint =
+ <&tpiu_in>;
+ };
+ };
+ };
+ };
+
+ etf@3027000 {
+ compatible = "arm,coresight-tmc", "arm,primecell";
+ reg = <0x3027000 0x1000>;
+
+ clocks = <&rpmcc RPM_QDSS_CLK>, <&rpmcc RPM_QDSS_A_CLK>;
+ clock-names = "apb_pclk", "atclk";
+
+ in-ports {
+ port {
+ etf_in: endpoint {
+ remote-endpoint =
+ <&merge_funnel_out>;
+ };
+ };
+ };
+
+ out-ports {
+ port {
+ etf_out: endpoint {
+ remote-endpoint =
+ <&replicator_in>;
+ };
+ };
+ };
+ };
+
+ etr@3028000 {
+ compatible = "arm,coresight-tmc", "arm,primecell";
+ reg = <0x3028000 0x1000>;
+
+ clocks = <&rpmcc RPM_QDSS_CLK>, <&rpmcc RPM_QDSS_A_CLK>;
+ clock-names = "apb_pclk", "atclk";
+ arm,scatter-gather;
+
+ in-ports {
+ port {
+ etr_in: endpoint {
+ remote-endpoint =
+ <&replicator_out0>;
+ };
+ };
+ };
+ };
+
+ debug@3810000 {
+ compatible = "arm,coresight-cpu-debug", "arm,primecell";
+ reg = <0x3810000 0x1000>;
+
+ clocks = <&rpmcc RPM_QDSS_CLK>;
+ clock-names = "apb_pclk";
+
+ cpu = <&CPU0>;
+ };
+
+ etm@3840000 {
+ compatible = "arm,coresight-etm4x", "arm,primecell";
+ reg = <0x3840000 0x1000>;
+
+ clocks = <&rpmcc RPM_QDSS_CLK>, <&rpmcc RPM_QDSS_A_CLK>;
+ clock-names = "apb_pclk", "atclk";
+
+ cpu = <&CPU0>;
+
+ out-ports {
+ port {
+ etm0_out: endpoint {
+ remote-endpoint =
+ <&apss_funnel0_in0>;
+ };
+ };
+ };
+ };
+
+ debug@3910000 {
+ compatible = "arm,coresight-cpu-debug", "arm,primecell";
+ reg = <0x3910000 0x1000>;
+
+ clocks = <&rpmcc RPM_QDSS_CLK>;
+ clock-names = "apb_pclk";
+
+ cpu = <&CPU1>;
+ };
+
+ etm@3940000 {
+ compatible = "arm,coresight-etm4x", "arm,primecell";
+ reg = <0x3940000 0x1000>;
+
+ clocks = <&rpmcc RPM_QDSS_CLK>, <&rpmcc RPM_QDSS_A_CLK>;
+ clock-names = "apb_pclk", "atclk";
+
+ cpu = <&CPU1>;
+
+ out-ports {
+ port {
+ etm1_out: endpoint {
+ remote-endpoint =
+ <&apss_funnel0_in1>;
+ };
+ };
+ };
+ };
+
+ funnel@39b0000 { /* APSS Funnel 0 */
+ compatible = "arm,coresight-dynamic-funnel", "arm,primecell";
+ reg = <0x39b0000 0x1000>;
+
+ clocks = <&rpmcc RPM_QDSS_CLK>, <&rpmcc RPM_QDSS_A_CLK>;
+ clock-names = "apb_pclk", "atclk";
+
+ in-ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ port@0 {
+ reg = <0>;
+ apss_funnel0_in0: endpoint {
+ remote-endpoint = <&etm0_out>;
+ };
+ };
+
+ port@1 {
+ reg = <1>;
+ apss_funnel0_in1: endpoint {
+ remote-endpoint = <&etm1_out>;
+ };
+ };
+ };
+
+ out-ports {
+ port {
+ apss_funnel0_out: endpoint {
+ remote-endpoint =
+ <&apss_merge_funnel_in0>;
+ };
+ };
+ };
+ };
+
+ debug@3a10000 {
+ compatible = "arm,coresight-cpu-debug", "arm,primecell";
+ reg = <0x3a10000 0x1000>;
+
+ clocks = <&rpmcc RPM_QDSS_CLK>;
+ clock-names = "apb_pclk";
+
+ cpu = <&CPU2>;
+ };
+
+ etm@3a40000 {
+ compatible = "arm,coresight-etm4x", "arm,primecell";
+ reg = <0x3a40000 0x1000>;
+
+ clocks = <&rpmcc RPM_QDSS_CLK>, <&rpmcc RPM_QDSS_A_CLK>;
+ clock-names = "apb_pclk", "atclk";
+
+ cpu = <&CPU2>;
+
+ out-ports {
+ port {
+ etm2_out: endpoint {
+ remote-endpoint =
+ <&apss_funnel1_in0>;
+ };
+ };
+ };
+ };
+
+ debug@3b10000 {
+ compatible = "arm,coresight-cpu-debug", "arm,primecell";
+ reg = <0x3b10000 0x1000>;
+
+ clocks = <&rpmcc RPM_QDSS_CLK>;
+ clock-names = "apb_pclk";
+
+ cpu = <&CPU3>;
+ };
+
+ etm@3b40000 {
+ compatible = "arm,coresight-etm4x", "arm,primecell";
+ reg = <0x3b40000 0x1000>;
+
+ clocks = <&rpmcc RPM_QDSS_CLK>, <&rpmcc RPM_QDSS_A_CLK>;
+ clock-names = "apb_pclk", "atclk";
+
+ cpu = <&CPU3>;
+
+ out-ports {
+ port {
+ etm3_out: endpoint {
+ remote-endpoint =
+ <&apss_funnel1_in1>;
+ };
+ };
+ };
+ };
+
+ funnel@3bb0000 { /* APSS Funnel 1 */
+ compatible = "arm,coresight-dynamic-funnel", "arm,primecell";
+ reg = <0x3bb0000 0x1000>;
+
+ clocks = <&rpmcc RPM_QDSS_CLK>, <&rpmcc RPM_QDSS_A_CLK>;
+ clock-names = "apb_pclk", "atclk";
+
+ in-ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ port@0 {
+ reg = <0>;
+ apss_funnel1_in0: endpoint {
+ remote-endpoint = <&etm2_out>;
+ };
+ };
+
+ port@1 {
+ reg = <1>;
+ apss_funnel1_in1: endpoint {
+ remote-endpoint = <&etm3_out>;
+ };
+ };
+ };
+
+ out-ports {
+ port {
+ apss_funnel1_out: endpoint {
+ remote-endpoint =
+ <&apss_merge_funnel_in1>;
+ };
+ };
+ };
+ };
+
+ funnel@3bc0000 {
+ compatible = "arm,coresight-dynamic-funnel", "arm,primecell";
+ reg = <0x3bc0000 0x1000>;
+
+ clocks = <&rpmcc RPM_QDSS_CLK>, <&rpmcc RPM_QDSS_A_CLK>;
+ clock-names = "apb_pclk", "atclk";
+
+ in-ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ port@0 {
+ reg = <0>;
+ apss_merge_funnel_in0: endpoint {
+ remote-endpoint =
+ <&apss_funnel0_out>;
+ };
+ };
+
+ port@1 {
+ reg = <1>;
+ apss_merge_funnel_in1: endpoint {
+ remote-endpoint =
+ <&apss_funnel1_out>;
+ };
+ };
+ };
+
+ out-ports {
+ port {
+ apss_merge_funnel_out: endpoint {
+ remote-endpoint =
+ <&funnel1_in>;
+ };
+ };
+ };
+ };
kryocc: clock-controller@6400000 {
compatible = "qcom,apcc-msm8996";
- reg = <0x6400000 0x90000>;
+ reg = <0x06400000 0x90000>;
#clock-cells = <1>;
};
+
+ usb3: usb@6af8800 {
+ compatible = "qcom,msm8996-dwc3", "qcom,dwc3";
+ reg = <0x06af8800 0x400>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges;
+
+ clocks = <&gcc GCC_SYS_NOC_USB3_AXI_CLK>,
+ <&gcc GCC_USB30_MASTER_CLK>,
+ <&gcc GCC_AGGRE2_USB3_AXI_CLK>,
+ <&gcc GCC_USB30_MOCK_UTMI_CLK>,
+ <&gcc GCC_USB30_SLEEP_CLK>,
+ <&gcc GCC_USB_PHY_CFG_AHB2PHY_CLK>;
+
+ assigned-clocks = <&gcc GCC_USB30_MOCK_UTMI_CLK>,
+ <&gcc GCC_USB30_MASTER_CLK>;
+ assigned-clock-rates = <19200000>, <120000000>;
+
+ power-domains = <&gcc USB30_GDSC>;
+ status = "disabled";
+
+ dwc3@6a00000 {
+ compatible = "snps,dwc3";
+ reg = <0x06a00000 0xcc00>;
+ interrupts = <0 131 IRQ_TYPE_LEVEL_HIGH>;
+ phys = <&hsusb_phy1>, <&ssusb_phy_0>;
+ phy-names = "usb2-phy", "usb3-phy";
+ snps,hird-threshold = /bits/ 8 <0>;
+ snps,dis_u2_susphy_quirk;
+ snps,dis_enblslpm_quirk;
+ snps,is-utmi-l1-suspend;
+ tx-fifo-resize;
+ };
+ };
+
+ usb3phy: phy@7410000 {
+ compatible = "qcom,msm8996-qmp-usb3-phy";
+ reg = <0x07410000 0x1c4>;
+ #clock-cells = <1>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges;
+
+ clocks = <&gcc GCC_USB3_PHY_AUX_CLK>,
+ <&gcc GCC_USB_PHY_CFG_AHB2PHY_CLK>,
+ <&gcc GCC_USB3_CLKREF_CLK>;
+ clock-names = "aux", "cfg_ahb", "ref";
+
+ resets = <&gcc GCC_USB3_PHY_BCR>,
+ <&gcc GCC_USB3PHY_PHY_BCR>;
+ reset-names = "phy", "common";
+ status = "disabled";
+
+ ssusb_phy_0: lane@7410200 {
+ reg = <0x07410200 0x200>,
+ <0x07410400 0x130>,
+ <0x07410600 0x1a8>;
+ #phy-cells = <0>;
+
+ clock-output-names = "usb3_phy_pipe_clk_src";
+ clocks = <&gcc GCC_USB3_PHY_PIPE_CLK>;
+ clock-names = "pipe0";
+ };
+ };
+
+ hsusb_phy1: phy@7411000 {
+ compatible = "qcom,msm8996-qusb2-phy";
+ reg = <0x07411000 0x180>;
+ #phy-cells = <0>;
+
+ clocks = <&gcc GCC_USB_PHY_CFG_AHB2PHY_CLK>,
+ <&gcc GCC_RX1_USB2_CLKREF_CLK>;
+ clock-names = "cfg_ahb", "ref";
+
+ resets = <&gcc GCC_QUSB2PHY_PRIM_BCR>;
+ nvmem-cells = <&qusb2p_hstx_trim>;
+ status = "disabled";
+ };
+
+ hsusb_phy2: phy@7412000 {
+ compatible = "qcom,msm8996-qusb2-phy";
+ reg = <0x07412000 0x180>;
+ #phy-cells = <0>;
+
+ clocks = <&gcc GCC_USB_PHY_CFG_AHB2PHY_CLK>,
+ <&gcc GCC_RX2_USB2_CLKREF_CLK>;
+ clock-names = "cfg_ahb", "ref";
+
+ resets = <&gcc GCC_QUSB2PHY_SEC_BCR>;
+ nvmem-cells = <&qusb2s_hstx_trim>;
+ status = "disabled";
+ };
+
+ sdhc2: sdhci@74a4900 {
+ status = "disabled";
+ compatible = "qcom,sdhci-msm-v4";
+ reg = <0x074a4900 0x314>, <0x074a4000 0x800>;
+ reg-names = "hc_mem", "core_mem";
+
+ interrupts = <0 125 IRQ_TYPE_LEVEL_HIGH>,
+ <0 221 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-names = "hc_irq", "pwr_irq";
+
+ clock-names = "iface", "core", "xo";
+ clocks = <&gcc GCC_SDCC2_AHB_CLK>,
+ <&gcc GCC_SDCC2_APPS_CLK>,
+ <&xo_board>;
+ bus-width = <4>;
+ };
blsp1_uart1: serial@7570000 {
compatible = "qcom,msm-uartdm-v1.4", "qcom,msm-uartdm";
@@ -460,6 +1879,41 @@
status = "disabled";
};
+ blsp1_i2c2: i2c@7577000 {
+ compatible = "qcom,i2c-qup-v2.2.1";
+ reg = <0x07577000 0x1000>;
+ interrupts = <GIC_SPI 97 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&gcc GCC_BLSP1_AHB_CLK>,
+ <&gcc GCC_BLSP1_QUP3_I2C_APPS_CLK>;
+ clock-names = "iface", "core";
+ pinctrl-names = "default", "sleep";
+ pinctrl-0 = <&blsp1_i2c2_default>;
+ pinctrl-1 = <&blsp1_i2c2_sleep>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ status = "disabled";
+ };
+
+ blsp2_uart1: serial@75b0000 {
+ compatible = "qcom,msm-uartdm-v1.4", "qcom,msm-uartdm";
+ reg = <0x075b0000 0x1000>;
+ interrupts = <GIC_SPI 114 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&gcc GCC_BLSP2_UART2_APPS_CLK>,
+ <&gcc GCC_BLSP2_AHB_CLK>;
+ clock-names = "core", "iface";
+ status = "disabled";
+ };
+
+ blsp2_uart2: serial@75b1000 {
+ compatible = "qcom,msm-uartdm-v1.4", "qcom,msm-uartdm";
+ reg = <0x075b1000 0x1000>;
+ interrupts = <GIC_SPI 115 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&gcc GCC_BLSP2_UART3_APPS_CLK>,
+ <&gcc GCC_BLSP2_AHB_CLK>;
+ clock-names = "core", "iface";
+ status = "disabled";
+ };
+
blsp2_i2c0: i2c@75b5000 {
compatible = "qcom,i2c-qup-v2.2.1";
reg = <0x075b5000 0x1000>;
@@ -475,16 +1929,6 @@
status = "disabled";
};
- blsp2_uart1: serial@75b0000 {
- compatible = "qcom,msm-uartdm-v1.4", "qcom,msm-uartdm";
- reg = <0x75b0000 0x1000>;
- interrupts = <GIC_SPI 114 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&gcc GCC_BLSP2_UART2_APPS_CLK>,
- <&gcc GCC_BLSP2_AHB_CLK>;
- clock-names = "core", "iface";
- status = "disabled";
- };
-
blsp2_i2c1: i2c@75b6000 {
compatible = "qcom,i2c-qup-v2.2.1";
reg = <0x075b6000 0x1000>;
@@ -495,31 +1939,6 @@
pinctrl-names = "default", "sleep";
pinctrl-0 = <&blsp2_i2c1_default>;
pinctrl-1 = <&blsp2_i2c1_sleep>;
- #address-cells = <1>;
- #size-cells = <0>;
- status = "disabled";
- };
-
- blsp2_uart2: serial@75b1000 {
- compatible = "qcom,msm-uartdm-v1.4", "qcom,msm-uartdm";
- reg = <0x075b1000 0x1000>;
- interrupts = <GIC_SPI 115 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&gcc GCC_BLSP2_UART3_APPS_CLK>,
- <&gcc GCC_BLSP2_AHB_CLK>;
- clock-names = "core", "iface";
- status = "disabled";
- };
-
- blsp1_i2c2: i2c@7577000 {
- compatible = "qcom,i2c-qup-v2.2.1";
- reg = <0x07577000 0x1000>;
- interrupts = <GIC_SPI 97 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&gcc GCC_BLSP1_AHB_CLK>,
- <&gcc GCC_BLSP1_QUP3_I2C_APPS_CLK>;
- clock-names = "iface", "core";
- pinctrl-names = "default", "sleep";
- pinctrl-0 = <&blsp1_i2c2_default>;
- pinctrl-1 = <&blsp1_i2c2_sleep>;
#address-cells = <1>;
#size-cells = <0>;
status = "disabled";
@@ -540,31 +1959,179 @@
status = "disabled";
};
- sdhc2: sdhci@74a4900 {
- status = "disabled";
- compatible = "qcom,sdhci-msm-v4";
- reg = <0x74a4900 0x314>, <0x74a4000 0x800>;
- reg-names = "hc_mem", "core_mem";
+ usb2: usb@76f8800 {
+ compatible = "qcom,msm8996-dwc3", "qcom,dwc3";
+ reg = <0x076f8800 0x400>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges;
- interrupts = <0 125 IRQ_TYPE_LEVEL_HIGH>,
- <0 221 IRQ_TYPE_LEVEL_HIGH>;
- interrupt-names = "hc_irq", "pwr_irq";
+ interrupts = <GIC_SPI 352 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-names = "hs_phy_irq";
- clock-names = "iface", "core", "xo";
- clocks = <&gcc GCC_SDCC2_AHB_CLK>,
- <&gcc GCC_SDCC2_APPS_CLK>,
- <&xo_board>;
- bus-width = <4>;
- };
+ clocks = <&gcc GCC_PERIPH_NOC_USB20_AHB_CLK>,
+ <&gcc GCC_USB20_MASTER_CLK>,
+ <&gcc GCC_USB20_MOCK_UTMI_CLK>,
+ <&gcc GCC_USB20_SLEEP_CLK>,
+ <&gcc GCC_USB_PHY_CFG_AHB2PHY_CLK>;
- msmgpio: pinctrl@1010000 {
- compatible = "qcom,msm8996-pinctrl";
- reg = <0x01010000 0x300000>;
- interrupts = <GIC_SPI 208 IRQ_TYPE_LEVEL_HIGH>;
- gpio-controller;
- #gpio-cells = <2>;
- interrupt-controller;
- #interrupt-cells = <2>;
+ assigned-clocks = <&gcc GCC_USB20_MOCK_UTMI_CLK>,
+ <&gcc GCC_USB20_MASTER_CLK>;
+ assigned-clock-rates = <19200000>, <60000000>;
+
+ power-domains = <&gcc USB30_GDSC>;
+ status = "disabled";
+
+ dwc3@7600000 {
+ compatible = "snps,dwc3";
+ reg = <0x07600000 0xcc00>;
+ interrupts = <0 138 IRQ_TYPE_LEVEL_HIGH>;
+ phys = <&hsusb_phy2>;
+ phy-names = "usb2-phy";
+ snps,dis_u2_susphy_quirk;
+ snps,dis_enblslpm_quirk;
+ };
+ };
+
+ slimbam: dma@9184000 {
+ compatible = "qcom,bam-v1.7.0";
+ qcom,controlled-remotely;
+ reg = <0x09184000 0x32000>;
+ num-channels = <31>;
+ interrupts = <0 164 IRQ_TYPE_LEVEL_HIGH>;
+ #dma-cells = <1>;
+ qcom,ee = <1>;
+ qcom,num-ees = <2>;
+ };
+
+ slim_msm: slim@91c0000 {
+ compatible = "qcom,slim-ngd-v1.5.0";
+ reg = <0x091c0000 0x2C000>;
+ reg-names = "ctrl";
+ interrupts = <0 163 IRQ_TYPE_LEVEL_HIGH>;
+ dmas = <&slimbam 3>, <&slimbam 4>,
+ <&slimbam 5>, <&slimbam 6>;
+ dma-names = "rx", "tx", "tx2", "rx2";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ ngd@1 {
+ reg = <1>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ tasha_ifd: tas-ifd {
+ compatible = "slim217,1a0";
+ reg = <0 0>;
+ };
+
+ wcd9335: codec@1{
+ pinctrl-0 = <&cdc_reset_active &wcd_intr_default>;
+ pinctrl-names = "default";
+
+ compatible = "slim217,1a0";
+ reg = <1 0>;
+
+ interrupt-parent = <&msmgpio>;
+ interrupts = <54 IRQ_TYPE_LEVEL_HIGH>,
+ <53 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-names = "intr1", "intr2";
+ interrupt-controller;
+ #interrupt-cells = <1>;
+ reset-gpios = <&msmgpio 64 0>;
+
+ slim-ifc-dev = <&tasha_ifd>;
+
+ #sound-dai-cells = <1>;
+ };
+ };
+ };
+
+ adsp_pil: remoteproc@9300000 {
+ compatible = "qcom,msm8996-adsp-pil";
+ reg = <0x09300000 0x80000>;
+
+ interrupts-extended = <&intc 0 162 IRQ_TYPE_EDGE_RISING>,
+ <&smp2p_adsp_in 0 IRQ_TYPE_EDGE_RISING>,
+ <&smp2p_adsp_in 1 IRQ_TYPE_EDGE_RISING>,
+ <&smp2p_adsp_in 2 IRQ_TYPE_EDGE_RISING>,
+ <&smp2p_adsp_in 3 IRQ_TYPE_EDGE_RISING>;
+ interrupt-names = "wdog", "fatal", "ready",
+ "handover", "stop-ack";
+
+ clocks = <&xo_board>;
+ clock-names = "xo";
+
+ memory-region = <&adsp_region>;
+
+ qcom,smem-states = <&smp2p_adsp_out 0>;
+ qcom,smem-state-names = "stop";
+
+ smd-edge {
+ interrupts = <GIC_SPI 156 IRQ_TYPE_EDGE_RISING>;
+
+ label = "lpass";
+ mboxes = <&apcs_glb 8>;
+ qcom,smd-edge = <1>;
+ qcom,remote-pid = <2>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ apr {
+ power-domains = <&gcc HLOS1_VOTE_LPASS_ADSP_GDSC>;
+ compatible = "qcom,apr-v2";
+ qcom,smd-channels = "apr_audio_svc";
+ qcom,apr-domain = <APR_DOMAIN_ADSP>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ q6core {
+ reg = <APR_SVC_ADSP_CORE>;
+ compatible = "qcom,q6core";
+ };
+
+ q6afe: q6afe {
+ compatible = "qcom,q6afe";
+ reg = <APR_SVC_AFE>;
+ q6afedai: dais {
+ compatible = "qcom,q6afe-dais";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ #sound-dai-cells = <1>;
+ hdmi@1 {
+ reg = <1>;
+ };
+ };
+ };
+
+ q6asm: q6asm {
+ compatible = "qcom,q6asm";
+ reg = <APR_SVC_ASM>;
+ q6asmdai: dais {
+ compatible = "qcom,q6asm-dais";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ #sound-dai-cells = <1>;
+ iommus = <&lpass_q6_smmu 1>;
+ };
+ };
+
+ q6adm: q6adm {
+ compatible = "qcom,q6adm";
+ reg = <APR_SVC_ADM>;
+ q6routing: routing {
+ compatible = "qcom,q6adm-routing";
+ #sound-dai-cells = <0>;
+ };
+ };
+ };
+
+ };
+ };
+
+ apcs_glb: mailbox@9820000 {
+ compatible = "qcom,msm8996-apcs-hmss-global";
+ reg = <0x09820000 0x1000>;
+
+ #mbox-cells = <1>;
};
timer@9840000 {
@@ -626,600 +2193,268 @@
};
};
- spmi_bus: qcom,spmi@400f000 {
- compatible = "qcom,spmi-pmic-arb";
- reg = <0x400f000 0x1000>,
- <0x4400000 0x800000>,
- <0x4c00000 0x800000>,
- <0x5800000 0x200000>,
- <0x400a000 0x002100>;
- reg-names = "core", "chnls", "obsrvr", "intr", "cnfg";
- interrupt-names = "periph_irq";
- interrupts = <GIC_SPI 326 IRQ_TYPE_LEVEL_HIGH>;
- qcom,ee = <0>;
- qcom,channel = <0>;
- #address-cells = <2>;
- #size-cells = <0>;
+ saw3: syscon@9a10000 {
+ compatible = "syscon";
+ reg = <0x09a10000 0x1000>;
+ };
+
+ intc: interrupt-controller@9bc0000 {
+ compatible = "qcom,msm8996-gic-v3", "arm,gic-v3";
+ #interrupt-cells = <3>;
interrupt-controller;
- #interrupt-cells = <4>;
+ #redistributor-regions = <1>;
+ redistributor-stride = <0x0 0x40000>;
+ reg = <0x09bc0000 0x10000>,
+ <0x09c00000 0x100000>;
+ interrupts = <GIC_PPI 9 IRQ_TYPE_LEVEL_HIGH>;
};
+ };
- ufsphy: phy@627000 {
- compatible = "qcom,msm8996-ufs-phy-qmp-14nm";
- reg = <0x627000 0xda8>;
- reg-names = "phy_mem";
- #phy-cells = <0>;
+ sound: sound {
+ };
- vdda-phy-supply = <&pm8994_l28>;
- vdda-pll-supply = <&pm8994_l12>;
+ thermal-zones {
+ cpu0-thermal {
+ polling-delay-passive = <250>;
+ polling-delay = <1000>;
- vdda-phy-max-microamp = <18380>;
- vdda-pll-max-microamp = <9440>;
+ thermal-sensors = <&tsens0 3>;
- vddp-ref-clk-supply = <&pm8994_l25>;
- vddp-ref-clk-max-microamp = <100>;
- vddp-ref-clk-always-on;
+ trips {
+ cpu0_alert0: trip-point0 {
+ temperature = <75000>;
+ hysteresis = <2000>;
+ type = "passive";
+ };
- clock-names = "ref_clk_src", "ref_clk";
- clocks = <&rpmcc RPM_SMD_LN_BB_CLK>,
- <&gcc GCC_UFS_CLKREF_CLK>;
- status = "disabled";
- };
-
- ufshc@624000 {
- compatible = "qcom,ufshc";
- reg = <0x624000 0x2500>;
- interrupts = <GIC_SPI 265 IRQ_TYPE_LEVEL_HIGH>;
-
- phys = <&ufsphy>;
- phy-names = "ufsphy";
-
- vcc-supply = <&pm8994_l20>;
- vccq-supply = <&pm8994_l25>;
- vccq2-supply = <&pm8994_s4>;
-
- vcc-max-microamp = <600000>;
- vccq-max-microamp = <450000>;
- vccq2-max-microamp = <450000>;
-
- power-domains = <&gcc UFS_GDSC>;
-
- clock-names =
- "core_clk_src",
- "core_clk",
- "bus_clk",
- "bus_aggr_clk",
- "iface_clk",
- "core_clk_unipro_src",
- "core_clk_unipro",
- "core_clk_ice",
- "ref_clk",
- "tx_lane0_sync_clk",
- "rx_lane0_sync_clk";
- clocks =
- <&gcc UFS_AXI_CLK_SRC>,
- <&gcc GCC_UFS_AXI_CLK>,
- <&gcc GCC_SYS_NOC_UFS_AXI_CLK>,
- <&gcc GCC_AGGRE2_UFS_AXI_CLK>,
- <&gcc GCC_UFS_AHB_CLK>,
- <&gcc UFS_ICE_CORE_CLK_SRC>,
- <&gcc GCC_UFS_UNIPRO_CORE_CLK>,
- <&gcc GCC_UFS_ICE_CORE_CLK>,
- <&rpmcc RPM_SMD_LN_BB_CLK>,
- <&gcc GCC_UFS_TX_SYMBOL_0_CLK>,
- <&gcc GCC_UFS_RX_SYMBOL_0_CLK>;
- freq-table-hz =
- <100000000 200000000>,
- <0 0>,
- <0 0>,
- <0 0>,
- <0 0>,
- <150000000 300000000>,
- <0 0>,
- <0 0>,
- <0 0>,
- <0 0>,
- <0 0>;
-
- lanes-per-direction = <1>;
- status = "disabled";
-
- ufs_variant {
- compatible = "qcom,ufs_variant";
+ cpu0_crit: cpu_crit {
+ temperature = <110000>;
+ hysteresis = <2000>;
+ type = "critical";
+ };
};
};
- mmcc: clock-controller@8c0000 {
- compatible = "qcom,mmcc-msm8996";
- #clock-cells = <1>;
- #reset-cells = <1>;
- #power-domain-cells = <1>;
- reg = <0x8c0000 0x40000>;
- assigned-clocks = <&mmcc MMPLL9_PLL>,
- <&mmcc MMPLL1_PLL>,
- <&mmcc MMPLL3_PLL>,
- <&mmcc MMPLL4_PLL>,
- <&mmcc MMPLL5_PLL>;
- assigned-clock-rates = <624000000>,
- <810000000>,
- <980000000>,
- <960000000>,
- <825000000>;
- };
+ cpu1-thermal {
+ polling-delay-passive = <250>;
+ polling-delay = <1000>;
- qfprom@74000 {
- compatible = "qcom,qfprom";
- reg = <0x74000 0x8ff>;
- #address-cells = <1>;
- #size-cells = <1>;
+ thermal-sensors = <&tsens0 5>;
- qusb2p_hstx_trim: hstx_trim@24e {
- reg = <0x24e 0x2>;
- bits = <5 4>;
- };
+ trips {
+ cpu1_alert0: trip-point0 {
+ temperature = <75000>;
+ hysteresis = <2000>;
+ type = "passive";
+ };
- qusb2s_hstx_trim: hstx_trim@24f {
- reg = <0x24f 0x1>;
- bits = <1 4>;
+ cpu1_crit: cpu_crit {
+ temperature = <110000>;
+ hysteresis = <2000>;
+ type = "critical";
+ };
};
};
- phy@34000 {
- compatible = "qcom,msm8996-qmp-pcie-phy";
- reg = <0x34000 0x488>;
- #clock-cells = <1>;
- #address-cells = <1>;
- #size-cells = <1>;
- ranges;
+ cpu2-thermal {
+ polling-delay-passive = <250>;
+ polling-delay = <1000>;
- clocks = <&gcc GCC_PCIE_PHY_AUX_CLK>,
- <&gcc GCC_PCIE_PHY_CFG_AHB_CLK>,
- <&gcc GCC_PCIE_CLKREF_CLK>;
- clock-names = "aux", "cfg_ahb", "ref";
+ thermal-sensors = <&tsens0 8>;
- vdda-phy-supply = <&pm8994_l28>;
- vdda-pll-supply = <&pm8994_l12>;
+ trips {
+ cpu2_alert0: trip-point0 {
+ temperature = <75000>;
+ hysteresis = <2000>;
+ type = "passive";
+ };
- resets = <&gcc GCC_PCIE_PHY_BCR>,
- <&gcc GCC_PCIE_PHY_COM_BCR>,
- <&gcc GCC_PCIE_PHY_COM_NOCSR_BCR>;
- reset-names = "phy", "common", "cfg";
- status = "disabled";
-
- pciephy_0: lane@35000 {
- reg = <0x035000 0x130>,
- <0x035200 0x200>,
- <0x035400 0x1dc>;
- #phy-cells = <0>;
-
- clock-output-names = "pcie_0_pipe_clk_src";
- clocks = <&gcc GCC_PCIE_0_PIPE_CLK>;
- clock-names = "pipe0";
- resets = <&gcc GCC_PCIE_0_PHY_BCR>;
- reset-names = "lane0";
- };
-
- pciephy_1: lane@36000 {
- reg = <0x036000 0x130>,
- <0x036200 0x200>,
- <0x036400 0x1dc>;
- #phy-cells = <0>;
-
- clock-output-names = "pcie_1_pipe_clk_src";
- clocks = <&gcc GCC_PCIE_1_PIPE_CLK>;
- clock-names = "pipe1";
- resets = <&gcc GCC_PCIE_1_PHY_BCR>;
- reset-names = "lane1";
- };
-
- pciephy_2: lane@37000 {
- reg = <0x037000 0x130>,
- <0x037200 0x200>,
- <0x037400 0x1dc>;
- #phy-cells = <0>;
-
- clock-output-names = "pcie_2_pipe_clk_src";
- clocks = <&gcc GCC_PCIE_2_PIPE_CLK>;
- clock-names = "pipe2";
- resets = <&gcc GCC_PCIE_2_PHY_BCR>;
- reset-names = "lane2";
+ cpu2_crit: cpu_crit {
+ temperature = <110000>;
+ hysteresis = <2000>;
+ type = "critical";
+ };
};
};
- phy@7410000 {
- compatible = "qcom,msm8996-qmp-usb3-phy";
- reg = <0x7410000 0x1c4>;
- #clock-cells = <1>;
- #address-cells = <1>;
- #size-cells = <1>;
- ranges;
+ cpu3-thermal {
+ polling-delay-passive = <250>;
+ polling-delay = <1000>;
- clocks = <&gcc GCC_USB3_PHY_AUX_CLK>,
- <&gcc GCC_USB_PHY_CFG_AHB2PHY_CLK>,
- <&gcc GCC_USB3_CLKREF_CLK>;
- clock-names = "aux", "cfg_ahb", "ref";
+ thermal-sensors = <&tsens0 10>;
- vdda-phy-supply = <&pm8994_l28>;
- vdda-pll-supply = <&pm8994_l12>;
+ trips {
+ cpu3_alert0: trip-point0 {
+ temperature = <75000>;
+ hysteresis = <2000>;
+ type = "passive";
+ };
- resets = <&gcc GCC_USB3_PHY_BCR>,
- <&gcc GCC_USB3PHY_PHY_BCR>;
- reset-names = "phy", "common";
- status = "disabled";
-
- ssusb_phy_0: lane@7410200 {
- reg = <0x7410200 0x200>,
- <0x7410400 0x130>,
- <0x7410600 0x1a8>;
- #phy-cells = <0>;
-
- clock-output-names = "usb3_phy_pipe_clk_src";
- clocks = <&gcc GCC_USB3_PHY_PIPE_CLK>;
- clock-names = "pipe0";
+ cpu3_crit: cpu_crit {
+ temperature = <110000>;
+ hysteresis = <2000>;
+ type = "critical";
+ };
};
};
- hsusb_phy1: phy@7411000 {
- compatible = "qcom,msm8996-qusb2-phy";
- reg = <0x7411000 0x180>;
- #phy-cells = <0>;
+ gpu-thermal-top {
+ polling-delay-passive = <250>;
+ polling-delay = <1000>;
- clocks = <&gcc GCC_USB_PHY_CFG_AHB2PHY_CLK>,
- <&gcc GCC_RX1_USB2_CLKREF_CLK>;
- clock-names = "cfg_ahb", "ref";
+ thermal-sensors = <&tsens1 6>;
- vdda-pll-supply = <&pm8994_l12>;
- vdda-phy-dpdm-supply = <&pm8994_l24>;
-
- resets = <&gcc GCC_QUSB2PHY_PRIM_BCR>;
- nvmem-cells = <&qusb2p_hstx_trim>;
- status = "disabled";
- };
-
- hsusb_phy2: phy@7412000 {
- compatible = "qcom,msm8996-qusb2-phy";
- reg = <0x7412000 0x180>;
- #phy-cells = <0>;
-
- clocks = <&gcc GCC_USB_PHY_CFG_AHB2PHY_CLK>,
- <&gcc GCC_RX2_USB2_CLKREF_CLK>;
- clock-names = "cfg_ahb", "ref";
-
- vdda-pll-supply = <&pm8994_l12>;
- vdda-phy-dpdm-supply = <&pm8994_l24>;
-
- resets = <&gcc GCC_QUSB2PHY_SEC_BCR>;
- nvmem-cells = <&qusb2s_hstx_trim>;
- status = "disabled";
- };
-
- usb2: usb@7600000 {
- compatible = "qcom,dwc3";
- #address-cells = <1>;
- #size-cells = <1>;
- ranges;
-
- clocks = <&gcc GCC_PERIPH_NOC_USB20_AHB_CLK>,
- <&gcc GCC_USB20_MASTER_CLK>,
- <&gcc GCC_USB20_MOCK_UTMI_CLK>,
- <&gcc GCC_USB20_SLEEP_CLK>,
- <&gcc GCC_USB_PHY_CFG_AHB2PHY_CLK>;
-
- assigned-clocks = <&gcc GCC_USB20_MOCK_UTMI_CLK>,
- <&gcc GCC_USB20_MASTER_CLK>;
- assigned-clock-rates = <19200000>, <60000000>;
-
- power-domains = <&gcc USB30_GDSC>;
- status = "disabled";
-
- dwc3@7600000 {
- compatible = "snps,dwc3";
- reg = <0x7600000 0xcc00>;
- interrupts = <0 138 IRQ_TYPE_LEVEL_HIGH>;
- phys = <&hsusb_phy2>;
- phy-names = "usb2-phy";
- snps,dis_u2_susphy_quirk;
- snps,dis_enblslpm_quirk;
+ trips {
+ gpu1_alert0: trip-point0 {
+ temperature = <90000>;
+ hysteresis = <2000>;
+ type = "hot";
+ };
};
};
- usb3: usb@6a00000 {
- compatible = "qcom,dwc3";
- #address-cells = <1>;
- #size-cells = <1>;
- ranges;
+ gpu-thermal-bottom {
+ polling-delay-passive = <250>;
+ polling-delay = <1000>;
- clocks = <&gcc GCC_SYS_NOC_USB3_AXI_CLK>,
- <&gcc GCC_USB30_MASTER_CLK>,
- <&gcc GCC_AGGRE2_USB3_AXI_CLK>,
- <&gcc GCC_USB30_MOCK_UTMI_CLK>,
- <&gcc GCC_USB30_SLEEP_CLK>,
- <&gcc GCC_USB_PHY_CFG_AHB2PHY_CLK>;
+ thermal-sensors = <&tsens1 7>;
- assigned-clocks = <&gcc GCC_USB30_MOCK_UTMI_CLK>,
- <&gcc GCC_USB30_MASTER_CLK>;
- assigned-clock-rates = <19200000>, <120000000>;
-
- power-domains = <&gcc USB30_GDSC>;
- status = "disabled";
-
- dwc3@6a00000 {
- compatible = "snps,dwc3";
- reg = <0x6a00000 0xcc00>;
- interrupts = <0 131 IRQ_TYPE_LEVEL_HIGH>;
- phys = <&hsusb_phy1>, <&ssusb_phy_0>;
- phy-names = "usb2-phy", "usb3-phy";
- snps,dis_u2_susphy_quirk;
- snps,dis_enblslpm_quirk;
+ trips {
+ gpu2_alert0: trip-point0 {
+ temperature = <90000>;
+ hysteresis = <2000>;
+ type = "hot";
+ };
};
};
- agnoc@0 {
- power-domains = <&gcc AGGRE0_NOC_GDSC>;
- compatible = "simple-pm-bus";
- #address-cells = <1>;
- #size-cells = <1>;
- ranges;
+ m4m-thermal {
+ polling-delay-passive = <250>;
+ polling-delay = <1000>;
- pcie0: pcie@600000 {
- compatible = "qcom,pcie-msm8996", "snps,dw-pcie";
- status = "disabled";
- power-domains = <&gcc PCIE0_GDSC>;
- bus-range = <0x00 0xff>;
- num-lanes = <1>;
+ thermal-sensors = <&tsens0 1>;
- reg = <0x00600000 0x2000>,
- <0x0c000000 0xf1d>,
- <0x0c000f20 0xa8>,
- <0x0c100000 0x100000>;
- reg-names = "parf", "dbi", "elbi","config";
-
- phys = <&pciephy_0>;
- phy-names = "pciephy";
-
- #address-cells = <3>;
- #size-cells = <2>;
- ranges = <0x01000000 0x0 0x0c200000 0x0c200000 0x0 0x100000>,
- <0x02000000 0x0 0x0c300000 0x0c300000 0x0 0xd00000>;
-
- interrupts = <GIC_SPI 405 IRQ_TYPE_LEVEL_HIGH>;
- interrupt-names = "msi";
- #interrupt-cells = <1>;
- interrupt-map-mask = <0 0 0 0x7>;
- interrupt-map = <0 0 0 1 &intc 0 244 IRQ_TYPE_LEVEL_HIGH>, /* int_a */
- <0 0 0 2 &intc 0 245 IRQ_TYPE_LEVEL_HIGH>, /* int_b */
- <0 0 0 3 &intc 0 247 IRQ_TYPE_LEVEL_HIGH>, /* int_c */
- <0 0 0 4 &intc 0 248 IRQ_TYPE_LEVEL_HIGH>; /* int_d */
-
- pinctrl-names = "default", "sleep";
- pinctrl-0 = <&pcie0_clkreq_default &pcie0_perst_default &pcie0_wake_default>;
- pinctrl-1 = <&pcie0_clkreq_sleep &pcie0_perst_default &pcie0_wake_sleep>;
-
-
- vdda-supply = <&pm8994_l28>;
-
- linux,pci-domain = <0>;
-
- clocks = <&gcc GCC_PCIE_0_PIPE_CLK>,
- <&gcc GCC_PCIE_0_AUX_CLK>,
- <&gcc GCC_PCIE_0_CFG_AHB_CLK>,
- <&gcc GCC_PCIE_0_MSTR_AXI_CLK>,
- <&gcc GCC_PCIE_0_SLV_AXI_CLK>;
-
- clock-names = "pipe",
- "aux",
- "cfg",
- "bus_master",
- "bus_slave";
-
+ trips {
+ m4m_alert0: trip-point0 {
+ temperature = <90000>;
+ hysteresis = <2000>;
+ type = "hot";
+ };
};
+ };
- pcie1: pcie@608000 {
- compatible = "qcom,pcie-msm8996", "snps,dw-pcie";
- power-domains = <&gcc PCIE1_GDSC>;
- bus-range = <0x00 0xff>;
- num-lanes = <1>;
+ l3-or-venus-thermal {
+ polling-delay-passive = <250>;
+ polling-delay = <1000>;
- status = "disabled";
+ thermal-sensors = <&tsens0 2>;
- reg = <0x00608000 0x2000>,
- <0x0d000000 0xf1d>,
- <0x0d000f20 0xa8>,
- <0x0d100000 0x100000>;
-
- reg-names = "parf", "dbi", "elbi","config";
-
- phys = <&pciephy_1>;
- phy-names = "pciephy";
-
- #address-cells = <3>;
- #size-cells = <2>;
- ranges = <0x01000000 0x0 0x0d200000 0x0d200000 0x0 0x100000>,
- <0x02000000 0x0 0x0d300000 0x0d300000 0x0 0xd00000>;
-
- interrupts = <GIC_SPI 413 IRQ_TYPE_LEVEL_HIGH>;
- interrupt-names = "msi";
- #interrupt-cells = <1>;
- interrupt-map-mask = <0 0 0 0x7>;
- interrupt-map = <0 0 0 1 &intc 0 272 IRQ_TYPE_LEVEL_HIGH>, /* int_a */
- <0 0 0 2 &intc 0 273 IRQ_TYPE_LEVEL_HIGH>, /* int_b */
- <0 0 0 3 &intc 0 274 IRQ_TYPE_LEVEL_HIGH>, /* int_c */
- <0 0 0 4 &intc 0 275 IRQ_TYPE_LEVEL_HIGH>; /* int_d */
-
- pinctrl-names = "default", "sleep";
- pinctrl-0 = <&pcie1_clkreq_default &pcie1_perst_default &pcie1_wake_default>;
- pinctrl-1 = <&pcie1_clkreq_sleep &pcie1_perst_default &pcie1_wake_sleep>;
-
-
- vdda-supply = <&pm8994_l28>;
- linux,pci-domain = <1>;
-
- clocks = <&gcc GCC_PCIE_1_PIPE_CLK>,
- <&gcc GCC_PCIE_1_AUX_CLK>,
- <&gcc GCC_PCIE_1_CFG_AHB_CLK>,
- <&gcc GCC_PCIE_1_MSTR_AXI_CLK>,
- <&gcc GCC_PCIE_1_SLV_AXI_CLK>;
-
- clock-names = "pipe",
- "aux",
- "cfg",
- "bus_master",
- "bus_slave";
+ trips {
+ l3_or_venus_alert0: trip-point0 {
+ temperature = <90000>;
+ hysteresis = <2000>;
+ type = "hot";
+ };
};
+ };
- pcie2: pcie@610000 {
- compatible = "qcom,pcie-msm8996", "snps,dw-pcie";
- power-domains = <&gcc PCIE2_GDSC>;
- bus-range = <0x00 0xff>;
- num-lanes = <1>;
- status = "disabled";
- reg = <0x00610000 0x2000>,
- <0x0e000000 0xf1d>,
- <0x0e000f20 0xa8>,
- <0x0e100000 0x100000>;
+ cluster0-l2-thermal {
+ polling-delay-passive = <250>;
+ polling-delay = <1000>;
- reg-names = "parf", "dbi", "elbi","config";
+ thermal-sensors = <&tsens0 7>;
- phys = <&pciephy_2>;
- phy-names = "pciephy";
+ trips {
+ cluster0_l2_alert0: trip-point0 {
+ temperature = <90000>;
+ hysteresis = <2000>;
+ type = "hot";
+ };
+ };
+ };
- #address-cells = <3>;
- #size-cells = <2>;
- ranges = <0x01000000 0x0 0x0e200000 0x0e200000 0x0 0x100000>,
- <0x02000000 0x0 0x0e300000 0x0e300000 0x0 0x1d00000>;
+ cluster1-l2-thermal {
+ polling-delay-passive = <250>;
+ polling-delay = <1000>;
- device_type = "pci";
+ thermal-sensors = <&tsens0 12>;
- interrupts = <GIC_SPI 421 IRQ_TYPE_LEVEL_HIGH>;
- interrupt-names = "msi";
- #interrupt-cells = <1>;
- interrupt-map-mask = <0 0 0 0x7>;
- interrupt-map = <0 0 0 1 &intc 0 142 IRQ_TYPE_LEVEL_HIGH>, /* int_a */
- <0 0 0 2 &intc 0 143 IRQ_TYPE_LEVEL_HIGH>, /* int_b */
- <0 0 0 3 &intc 0 144 IRQ_TYPE_LEVEL_HIGH>, /* int_c */
- <0 0 0 4 &intc 0 145 IRQ_TYPE_LEVEL_HIGH>; /* int_d */
+ trips {
+ cluster1_l2_alert0: trip-point0 {
+ temperature = <90000>;
+ hysteresis = <2000>;
+ type = "hot";
+ };
+ };
+ };
- pinctrl-names = "default", "sleep";
- pinctrl-0 = <&pcie2_clkreq_default &pcie2_perst_default &pcie2_wake_default>;
- pinctrl-1 = <&pcie2_clkreq_sleep &pcie2_perst_default &pcie2_wake_sleep >;
+ camera-thermal {
+ polling-delay-passive = <250>;
+ polling-delay = <1000>;
- vdda-supply = <&pm8994_l28>;
+ thermal-sensors = <&tsens1 1>;
- linux,pci-domain = <2>;
- clocks = <&gcc GCC_PCIE_2_PIPE_CLK>,
- <&gcc GCC_PCIE_2_AUX_CLK>,
- <&gcc GCC_PCIE_2_CFG_AHB_CLK>,
- <&gcc GCC_PCIE_2_MSTR_AXI_CLK>,
- <&gcc GCC_PCIE_2_SLV_AXI_CLK>;
+ trips {
+ camera_alert0: trip-point0 {
+ temperature = <90000>;
+ hysteresis = <2000>;
+ type = "hot";
+ };
+ };
+ };
- clock-names = "pipe",
- "aux",
- "cfg",
- "bus_master",
- "bus_slave";
+ q6-dsp-thermal {
+ polling-delay-passive = <250>;
+ polling-delay = <1000>;
+
+ thermal-sensors = <&tsens1 2>;
+
+ trips {
+ q6_dsp_alert0: trip-point0 {
+ temperature = <90000>;
+ hysteresis = <2000>;
+ type = "hot";
+ };
+ };
+ };
+
+ mem-thermal {
+ polling-delay-passive = <250>;
+ polling-delay = <1000>;
+
+ thermal-sensors = <&tsens1 3>;
+
+ trips {
+ mem_alert0: trip-point0 {
+ temperature = <90000>;
+ hysteresis = <2000>;
+ type = "hot";
+ };
+ };
+ };
+
+ modemtx-thermal {
+ polling-delay-passive = <250>;
+ polling-delay = <1000>;
+
+ thermal-sensors = <&tsens1 4>;
+
+ trips {
+ modemtx_alert0: trip-point0 {
+ temperature = <90000>;
+ hysteresis = <2000>;
+ type = "hot";
+ };
};
};
};
- adsp-pil {
- compatible = "qcom,msm8996-adsp-pil";
-
- interrupts-extended = <&intc 0 162 IRQ_TYPE_EDGE_RISING>,
- <&adsp_smp2p_in 0 IRQ_TYPE_EDGE_RISING>,
- <&adsp_smp2p_in 1 IRQ_TYPE_EDGE_RISING>,
- <&adsp_smp2p_in 2 IRQ_TYPE_EDGE_RISING>,
- <&adsp_smp2p_in 3 IRQ_TYPE_EDGE_RISING>;
- interrupt-names = "wdog", "fatal", "ready",
- "handover", "stop-ack";
-
- clocks = <&xo_board>;
- clock-names = "xo";
-
- memory-region = <&adsp_region>;
-
- qcom,smem-states = <&adsp_smp2p_out 0>;
- qcom,smem-state-names = "stop";
-
- smd-edge {
- interrupts = <GIC_SPI 156 IRQ_TYPE_EDGE_RISING>;
-
- label = "lpass";
- qcom,ipc = <&apcs 16 8>;
- qcom,smd-edge = <1>;
- qcom,remote-pid = <2>;
- };
+ timer {
+ compatible = "arm,armv8-timer";
+ interrupts = <GIC_PPI 13 IRQ_TYPE_LEVEL_LOW>,
+ <GIC_PPI 14 IRQ_TYPE_LEVEL_LOW>,
+ <GIC_PPI 11 IRQ_TYPE_LEVEL_LOW>,
+ <GIC_PPI 10 IRQ_TYPE_LEVEL_LOW>;
};
-
- adsp-smp2p {
- compatible = "qcom,smp2p";
- qcom,smem = <443>, <429>;
-
- interrupts = <0 158 IRQ_TYPE_EDGE_RISING>;
-
- qcom,ipc = <&apcs 16 10>;
-
- qcom,local-pid = <0>;
- qcom,remote-pid = <2>;
-
- adsp_smp2p_out: master-kernel {
- qcom,entry-name = "master-kernel";
- #qcom,smem-state-cells = <1>;
- };
-
- adsp_smp2p_in: slave-kernel {
- qcom,entry-name = "slave-kernel";
-
- interrupt-controller;
- #interrupt-cells = <2>;
- };
- };
-
- modem-smp2p {
- compatible = "qcom,smp2p";
- qcom,smem = <435>, <428>;
-
- interrupts = <GIC_SPI 451 IRQ_TYPE_EDGE_RISING>;
-
- qcom,ipc = <&apcs 16 14>;
-
- qcom,local-pid = <0>;
- qcom,remote-pid = <1>;
-
- modem_smp2p_out: master-kernel {
- qcom,entry-name = "master-kernel";
- #qcom,smem-state-cells = <1>;
- };
-
- modem_smp2p_in: slave-kernel {
- qcom,entry-name = "slave-kernel";
-
- interrupt-controller;
- #interrupt-cells = <2>;
- };
- };
-
- smp2p-slpi {
- compatible = "qcom,smp2p";
- qcom,smem = <481>, <430>;
-
- interrupts = <GIC_SPI 178 IRQ_TYPE_EDGE_RISING>;
-
- qcom,ipc = <&apcs 16 26>;
-
- qcom,local-pid = <0>;
- qcom,remote-pid = <3>;
-
- slpi_smp2p_in: slave-kernel {
- qcom,entry-name = "slave-kernel";
- interrupt-controller;
- #interrupt-cells = <2>;
- };
-
- slpi_smp2p_out: master-kernel {
- qcom,entry-name = "master-kernel";
- #qcom,smem-state-cells = <1>;
- };
- };
-
};
#include "msm8996-pins.dtsi"
--
Gitblit v1.6.2