From 05e59e5fb0064c97a1c10921ecd549f2d4a58565 Mon Sep 17 00:00:00 2001
From: hc <hc@nodka.com>
Date: Wed, 09 Oct 2024 06:14:40 +0000
Subject: [PATCH] add REDIRECT
---
kernel/Documentation/devicetree/bindings/gpu/brcm,bcm-v3d.txt | 11 ++++++++---
1 files changed, 8 insertions(+), 3 deletions(-)
diff --git a/kernel/Documentation/devicetree/bindings/gpu/brcm,bcm-v3d.txt b/kernel/Documentation/devicetree/bindings/gpu/brcm,bcm-v3d.txt
index c907aa8..b2df82b 100644
--- a/kernel/Documentation/devicetree/bindings/gpu/brcm,bcm-v3d.txt
+++ b/kernel/Documentation/devicetree/bindings/gpu/brcm,bcm-v3d.txt
@@ -6,15 +6,20 @@
Required properties:
- compatible: Should be "brcm,7268-v3d" or "brcm,7278-v3d"
- reg: Physical base addresses and lengths of the register areas
-- reg-names: Names for the register areas. The "hub", "bridge", and "core0"
+- reg-names: Names for the register areas. The "hub" and "core0"
register areas are always required. The "gca" register area
- is required if the GCA cache controller is present.
+ is required if the GCA cache controller is present. The
+ "bridge" register area is required if an external reset
+ controller is not present.
- interrupts: The interrupt numbers. The first interrupt is for the hub,
- while the following interrupts are for the cores.
+ while the following interrupts are separate interrupt lines
+ for the cores (if they don't share the hub's interrupt).
See bindings/interrupt-controller/interrupts.txt
Optional properties:
- clocks: The core clock the unit runs on
+- resets: The reset line for v3d, if not using a mapping of the bridge
+ See bindings/reset/reset.txt
v3d {
compatible = "brcm,7268-v3d";
--
Gitblit v1.6.2