From 04dd17822334871b23ea2862f7798fb0e0007777 Mon Sep 17 00:00:00 2001
From: hc <hc@nodka.com>
Date: Sat, 11 May 2024 08:53:19 +0000
Subject: [PATCH] change otg to host mode
---
kernel/drivers/net/can/usb/esd_usb2.c | 24 ++++++++++--------------
1 files changed, 10 insertions(+), 14 deletions(-)
diff --git a/kernel/drivers/net/can/usb/esd_usb2.c b/kernel/drivers/net/can/usb/esd_usb2.c
index d4e6b40..c9ccce6 100644
--- a/kernel/drivers/net/can/usb/esd_usb2.c
+++ b/kernel/drivers/net/can/usb/esd_usb2.c
@@ -1,20 +1,8 @@
+// SPDX-License-Identifier: GPL-2.0-only
/*
* CAN driver for esd CAN-USB/2 and CAN-USB/Micro
*
* Copyright (C) 2010-2012 Matthias Fuchs <matthias.fuchs@esd.eu>, esd gmbh
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License as published
- * by the Free Software Foundation; version 2 of the License.
- *
- * This program is distributed in the hope that it will be useful, but
- * WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
- * General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License along
- * with this program; if not, write to the Free Software Foundation, Inc.,
- * 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA.
*/
#include <linux/signal.h>
#include <linux/slab.h>
@@ -239,6 +227,10 @@
u8 rxerr = msg->msg.rx.data[2];
u8 txerr = msg->msg.rx.data[3];
+ netdev_dbg(priv->netdev,
+ "CAN_ERR_EV_EXT: dlc=%#02x state=%02x ecc=%02x rec=%02x tec=%02x\n",
+ msg->msg.rx.dlc, state, ecc, rxerr, txerr);
+
skb = alloc_can_err_skb(priv->netdev, &cf);
if (skb == NULL) {
stats->rx_dropped++;
@@ -265,6 +257,8 @@
break;
default:
priv->can.state = CAN_STATE_ERROR_ACTIVE;
+ txerr = 0;
+ rxerr = 0;
break;
}
} else {
@@ -284,7 +278,6 @@
cf->data[2] |= CAN_ERR_PROT_STUFF;
break;
default:
- cf->data[3] = ecc & SJA1000_ECC_SEG;
break;
}
@@ -292,6 +285,9 @@
if (!(ecc & SJA1000_ECC_DIR))
cf->data[2] |= CAN_ERR_PROT_TX;
+ /* Bit stream position in CAN frame as the error was detected */
+ cf->data[3] = ecc & SJA1000_ECC_SEG;
+
if (priv->can.state == CAN_STATE_ERROR_WARNING ||
priv->can.state == CAN_STATE_ERROR_PASSIVE) {
cf->data[1] = (txerr > rxerr) ?
--
Gitblit v1.6.2