From 04dd17822334871b23ea2862f7798fb0e0007777 Mon Sep 17 00:00:00 2001
From: hc <hc@nodka.com>
Date: Sat, 11 May 2024 08:53:19 +0000
Subject: [PATCH] change otg to host mode
---
kernel/drivers/ata/Kconfig | 95 +++++++++++++++++++++++++++++++++++++++++++++--
1 files changed, 91 insertions(+), 4 deletions(-)
diff --git a/kernel/drivers/ata/Kconfig b/kernel/drivers/ata/Kconfig
index 99698d7..030cb32 100644
--- a/kernel/drivers/ata/Kconfig
+++ b/kernel/drivers/ata/Kconfig
@@ -17,7 +17,7 @@
depends on BLOCK
select SCSI
select GLOB
- ---help---
+ help
If you want to use an ATA hard disk, ATA tape drive, ATA CD-ROM or
any other ATA device under Linux, say Y and make sure that you know
the name of your ATA host adapter (the card inside your computer
@@ -33,7 +33,12 @@
config ATA_NONSTANDARD
bool
- default n
+
+config SATA_HOST
+ bool
+
+config PATA_TIMINGS
+ bool
config ATA_VERBOSE_ERROR
bool "Verbose ATA error reporting"
@@ -46,9 +51,26 @@
If unsure, say Y.
+config ATA_FORCE
+ bool "\"libata.force=\" kernel parameter support" if EXPERT
+ default y
+ help
+ This option adds support for "libata.force=" kernel parameter for
+ forcing configuration settings.
+
+ For further information, please read
+ <file:Documentation/admin-guide/kernel-parameters.txt>.
+
+ This option will enlarge the kernel by approx. 3KB. Disable it if
+ kernel size is more important than ability to override the default
+ configuration settings.
+
+ If unsure, say Y.
+
config ATA_ACPI
bool "ATA ACPI Support"
depends on ACPI
+ select PATA_TIMINGS
default y
help
This option adds support for ATA-related ACPI objects.
@@ -62,7 +84,6 @@
config SATA_ZPODD
bool "SATA Zero Power Optical Disc Drive (ZPODD) support"
depends on ATA_ACPI && PM
- default n
help
This option adds support for SATA Zero Power Optical Disc
Drive (ZPODD). It requires both the ODD and the platform
@@ -75,6 +96,7 @@
config SATA_PMP
bool "SATA Port Multiplier support"
+ depends on SATA_HOST
default y
help
This option adds support for SATA Port Multipliers
@@ -87,6 +109,7 @@
config SATA_AHCI
tristate "AHCI SATA support"
depends on PCI
+ select SATA_HOST
help
This option enables support for AHCI Serial ATA.
@@ -113,6 +136,7 @@
config SATA_AHCI_PLATFORM
tristate "Platform AHCI SATA support"
+ select SATA_HOST
help
This option enables support for Platform AHCI Serial ATA
controllers.
@@ -123,6 +147,7 @@
tristate "Broadcom AHCI SATA support"
depends on ARCH_BRCMSTB || BMIPS_GENERIC || ARCH_BCM_NSP || \
ARCH_BCM_63XX
+ select SATA_HOST
help
This option enables support for the AHCI SATA3 controller found on
Broadcom SoC's.
@@ -132,6 +157,7 @@
config AHCI_DA850
tristate "DaVinci DA850 AHCI SATA support"
depends on ARCH_DAVINCI_DA850
+ select SATA_HOST
help
This option enables support for the DaVinci DA850 SoC's
onboard AHCI SATA.
@@ -141,6 +167,7 @@
config AHCI_DM816
tristate "DaVinci DM816 AHCI SATA support"
depends on ARCH_OMAP2PLUS
+ select SATA_HOST
help
This option enables support for the DaVinci DM816 SoC's
onboard AHCI SATA controller.
@@ -150,6 +177,7 @@
config AHCI_ST
tristate "ST AHCI SATA support"
depends on ARCH_STI
+ select SATA_HOST
help
This option enables support for ST AHCI SATA controller.
@@ -159,6 +187,7 @@
tristate "Freescale i.MX AHCI SATA support"
depends on MFD_SYSCON && (ARCH_MXC || COMPILE_TEST)
depends on (HWMON && (THERMAL || !THERMAL_OF)) || !HWMON
+ select SATA_HOST
help
This option enables support for the Freescale i.MX SoC's
onboard AHCI SATA.
@@ -168,6 +197,7 @@
config AHCI_CEVA
tristate "CEVA AHCI SATA support"
depends on OF
+ select SATA_HOST
help
This option enables support for the CEVA AHCI SATA.
It can be found on the Xilinx Zynq UltraScale+ MPSoC.
@@ -178,6 +208,7 @@
tristate "MediaTek AHCI SATA support"
depends on ARCH_MEDIATEK
select MFD_SYSCON
+ select SATA_HOST
help
This option enables support for the MediaTek SoC's
onboard AHCI SATA controller.
@@ -187,6 +218,7 @@
config AHCI_MVEBU
tristate "Marvell EBU AHCI SATA support"
depends on ARCH_MVEBU
+ select SATA_HOST
help
This option enables support for the Marvebu EBU SoC's
onboard AHCI SATA.
@@ -205,6 +237,7 @@
config AHCI_SUNXI
tristate "Allwinner sunxi AHCI SATA support"
depends on ARCH_SUNXI
+ select SATA_HOST
help
This option enables support for the Allwinner sunxi SoC's
onboard AHCI SATA.
@@ -214,6 +247,7 @@
config AHCI_TEGRA
tristate "NVIDIA Tegra AHCI SATA support"
depends on ARCH_TEGRA
+ select SATA_HOST
help
This option enables support for the NVIDIA Tegra SoC's
onboard AHCI SATA.
@@ -223,12 +257,14 @@
config AHCI_XGENE
tristate "APM X-Gene 6.0Gbps AHCI SATA host controller support"
depends on PHY_XGENE
+ select SATA_HOST
help
This option enables support for APM X-Gene SoC SATA host controller.
config AHCI_QORIQ
tristate "Freescale QorIQ AHCI SATA support"
depends on OF
+ select SATA_HOST
help
This option enables support for the Freescale QorIQ AHCI SoC's
onboard AHCI SATA.
@@ -238,6 +274,7 @@
config SATA_FSL
tristate "Freescale 3.0Gbps SATA support"
depends on FSL_SOC
+ select SATA_HOST
help
This option enables support for Freescale 3.0Gbps SATA controller.
It can be found on MPC837x and MPC8315.
@@ -247,6 +284,7 @@
config SATA_GEMINI
tristate "Gemini SATA bridge support"
depends on ARCH_GEMINI || COMPILE_TEST
+ select SATA_HOST
default ARCH_GEMINI
help
This enabled support for the FTIDE010 to SATA bridge
@@ -257,6 +295,7 @@
config SATA_AHCI_SEATTLE
tristate "AMD Seattle 6.0Gbps AHCI SATA host controller support"
depends on ARCH_SEATTLE
+ select SATA_HOST
help
This option enables support for AMD Seattle SATA host controller.
@@ -265,12 +304,14 @@
config SATA_INIC162X
tristate "Initio 162x SATA support (Very Experimental)"
depends on PCI
+ select SATA_HOST
help
This option enables support for Initio 162x Serial ATA.
config SATA_ACARD_AHCI
tristate "ACard AHCI variant (ATP 8620)"
depends on PCI
+ select SATA_HOST
help
This option enables support for Acard.
@@ -279,6 +320,7 @@
config SATA_SIL24
tristate "Silicon Image 3124/3132 SATA support"
depends on PCI
+ select SATA_HOST
help
This option enables support for Silicon Image 3124/3132 Serial ATA.
@@ -319,6 +361,7 @@
config PATA_OCTEON_CF
tristate "OCTEON Boot Bus Compact Flash support"
depends on CAVIUM_OCTEON_SOC
+ select PATA_TIMINGS
help
This option enables a polled compact flash driver for use with
compact flash cards attached to the OCTEON boot bus.
@@ -328,6 +371,7 @@
config SATA_QSTOR
tristate "Pacific Digital SATA QStor support"
depends on PCI
+ select SATA_HOST
help
This option enables support for Pacific Digital Serial ATA QStor.
@@ -336,6 +380,7 @@
config SATA_SX4
tristate "Promise SATA SX4 support (Experimental)"
depends on PCI
+ select SATA_HOST
help
This option enables support for Promise Serial ATA SX4.
@@ -359,6 +404,7 @@
config ATA_PIIX
tristate "Intel ESB, ICH, PIIX3, PIIX4 PATA/SATA support"
depends on PCI
+ select SATA_HOST
help
This option enables support for ICH5/6/7/8 Serial ATA
and support for PATA on the Intel ESB/ICH/PIIX3/PIIX4 series
@@ -370,6 +416,7 @@
tristate "DesignWare Cores SATA support"
depends on DMADEVICES
select GENERIC_PHY
+ select SATA_HOST
help
This option enables support for the on-chip SATA controller of the
AppliedMicro processor 460EX.
@@ -400,6 +447,7 @@
config SATA_HIGHBANK
tristate "Calxeda Highbank SATA support"
depends on ARCH_HIGHBANK || COMPILE_TEST
+ select SATA_HOST
help
This option enables support for the Calxeda Highbank SoC's
onboard SATA.
@@ -411,6 +459,7 @@
depends on PCI || ARCH_DOVE || ARCH_MV78XX0 || \
ARCH_MVEBU || ARCH_ORION5X || COMPILE_TEST
select GENERIC_PHY
+ select SATA_HOST
help
This option enables support for the Marvell Serial ATA family.
Currently supports 88SX[56]0[48][01] PCI(-X) chips,
@@ -421,6 +470,7 @@
config SATA_NV
tristate "NVIDIA SATA support"
depends on PCI
+ select SATA_HOST
help
This option enables support for NVIDIA Serial ATA.
@@ -429,6 +479,7 @@
config SATA_PROMISE
tristate "Promise SATA TX2/TX4 support"
depends on PCI
+ select SATA_HOST
help
This option enables support for Promise Serial ATA TX2/TX4.
@@ -437,6 +488,7 @@
config SATA_RCAR
tristate "Renesas R-Car SATA support"
depends on ARCH_RENESAS || COMPILE_TEST
+ select SATA_HOST
help
This option enables support for Renesas R-Car Serial ATA.
@@ -445,6 +497,7 @@
config SATA_SIL
tristate "Silicon Image SATA support"
depends on PCI
+ select SATA_HOST
help
This option enables support for Silicon Image Serial ATA.
@@ -454,6 +507,7 @@
tristate "SiS 964/965/966/180 SATA support"
depends on PCI
select PATA_SIS
+ select SATA_HOST
help
This option enables support for SiS Serial ATA on
SiS 964/965/966/180 and Parallel ATA on SiS 180.
@@ -464,6 +518,7 @@
config SATA_SVW
tristate "ServerWorks Frodo / Apple K2 SATA support"
depends on PCI
+ select SATA_HOST
help
This option enables support for Broadcom/Serverworks/Apple K2
SATA support.
@@ -473,6 +528,7 @@
config SATA_ULI
tristate "ULi Electronics SATA support"
depends on PCI
+ select SATA_HOST
help
This option enables support for ULi Electronics SATA.
@@ -481,6 +537,7 @@
config SATA_VIA
tristate "VIA SATA support"
depends on PCI
+ select SATA_HOST
help
This option enables support for VIA Serial ATA.
@@ -489,6 +546,7 @@
config SATA_VITESSE
tristate "VITESSE VSC-7174 / INTEL 31244 SATA support"
depends on PCI
+ select SATA_HOST
help
This option enables support for Vitesse VSC7174 and Intel 31244 Serial ATA.
@@ -499,6 +557,7 @@
config PATA_ALI
tristate "ALi PATA support"
depends on PCI
+ select PATA_TIMINGS
help
This option enables support for the ALi ATA interfaces
found on the many ALi chipsets.
@@ -508,6 +567,7 @@
config PATA_AMD
tristate "AMD/NVidia PATA support"
depends on PCI
+ select PATA_TIMINGS
help
This option enables support for the AMD and NVidia PATA
interfaces found on the chipsets for Athlon/Athlon64.
@@ -542,6 +602,7 @@
config PATA_ATP867X
tristate "ARTOP/Acard ATP867X PATA support"
depends on PCI
+ select PATA_TIMINGS
help
This option enables support for ARTOP/Acard ATP867X PATA
controllers.
@@ -551,6 +612,7 @@
config PATA_BK3710
tristate "Palmchip BK3710 PATA support"
depends on ARCH_DAVINCI
+ select PATA_TIMINGS
help
This option enables support for the integrated IDE controller on
the TI DaVinci SoC.
@@ -560,6 +622,7 @@
config PATA_CMD64X
tristate "CMD64x PATA support"
depends on PCI
+ select PATA_TIMINGS
help
This option enables support for the CMD64x series chips
except for the CMD640.
@@ -605,6 +668,7 @@
config PATA_CYPRESS
tristate "Cypress CY82C693 PATA support (Very Experimental)"
depends on PCI
+ select PATA_TIMINGS
help
This option enables support for the Cypress/Contaq CY82C693
chipset found in some Alpha systems
@@ -623,6 +687,7 @@
config PATA_EP93XX
tristate "Cirrus Logic EP93xx PATA support"
depends on ARCH_EP93XX
+ select PATA_TIMINGS
help
This option enables support for the PATA controller in
the Cirrus Logic EP9312 and EP9315 ARM CPU.
@@ -687,6 +752,7 @@
config PATA_ICSIDE
tristate "Acorn ICS PATA support"
depends on ARM && ARCH_ACORN
+ select PATA_TIMINGS
help
On Acorn systems, say Y here if you wish to use the ICS PATA
interface card. This is not required for ICS partition support.
@@ -695,6 +761,7 @@
config PATA_IMX
tristate "PATA support for Freescale iMX"
depends on ARCH_MXC
+ select PATA_TIMINGS
help
This option enables support for the PATA host available on Freescale
iMX SoCs.
@@ -780,6 +847,7 @@
config PATA_NS87415
tristate "Nat Semi NS87415 PATA support"
depends on PCI
+ select PATA_TIMINGS
help
This option enables support for the National Semiconductor
NS87415 PCI-IDE controller.
@@ -904,6 +972,7 @@
config PATA_VIA
tristate "VIA PATA support"
depends on PCI
+ select PATA_TIMINGS
help
This option enables support for the VIA PATA interfaces
found on the many VIA chipsets.
@@ -937,6 +1006,7 @@
config PATA_CMD640_PCI
tristate "CMD640 PCI PATA support (Experimental)"
depends on PCI
+ select PATA_TIMINGS
help
This option enables support for the CMD640 PCI IDE
interface chip. Only the primary channel is currently
@@ -962,6 +1032,18 @@
A4000 and A4000T) and also for IDE interfaces on
the Zorro expansion bus (M-Tech E-Matrix 530
expansion card).
+
+ If unsure, say N.
+
+config PATA_BUDDHA
+ tristate "Buddha/Catweasel/X-Surf PATA support"
+ depends on ZORRO
+ help
+ This option enables support for the IDE interfaces
+ on the Buddha, Catweasel and X-Surf expansion boards
+ on the Zorro expansion bus. It supports up to two
+ interfaces on the Buddha, three on the Catweasel and
+ two on the X-Surf.
If unsure, say N.
@@ -995,6 +1077,7 @@
config PATA_NS87410
tristate "Nat Semi NS87410 PATA support"
depends on PCI
+ select PATA_TIMINGS
help
This option enables support for the National Semiconductor
NS87410 PCI-IDE controller.
@@ -1075,6 +1158,7 @@
config PATA_SAMSUNG_CF
tristate "Samsung SoC PATA support"
depends on SAMSUNG_DEV_IDE
+ select PATA_TIMINGS
help
This option enables basic support for Samsung's S3C/S5P board
PATA controllers via the new ATA layer
@@ -1093,7 +1177,8 @@
config PATA_ACPI
tristate "ACPI firmware driver for PATA"
- depends on ATA_ACPI && ATA_BMDMA
+ depends on ATA_ACPI && ATA_BMDMA && PCI
+ select PATA_TIMINGS
help
This option enables an ACPI method driver which drives
motherboard PATA controller interfaces through the ACPI
@@ -1103,6 +1188,7 @@
config ATA_GENERIC
tristate "Generic ATA support"
depends on PCI && ATA_BMDMA
+ select SATA_HOST
help
This option enables support for generic BIOS configured
ATA controllers via the new ATA layer
@@ -1112,6 +1198,7 @@
config PATA_LEGACY
tristate "Legacy ISA PATA support (Experimental)"
depends on (ISA || PCI)
+ select PATA_TIMINGS
help
This option enables support for ISA/VLB/PCI bus legacy PATA
ports and allows them to be accessed via the new ATA layer.
--
Gitblit v1.6.2