From 04dd17822334871b23ea2862f7798fb0e0007777 Mon Sep 17 00:00:00 2001
From: hc <hc@nodka.com>
Date: Sat, 11 May 2024 08:53:19 +0000
Subject: [PATCH] change otg to host mode
---
kernel/arch/arm64/boot/dts/xilinx/zynqmp-zcu102-revA.dts | 208 +++++++++++++++++++++++++++++++++++++---------------
1 files changed, 148 insertions(+), 60 deletions(-)
diff --git a/kernel/arch/arm64/boot/dts/xilinx/zynqmp-zcu102-revA.dts b/kernel/arch/arm64/boot/dts/xilinx/zynqmp-zcu102-revA.dts
index d3b8e1a..f1255f6 100644
--- a/kernel/arch/arm64/boot/dts/xilinx/zynqmp-zcu102-revA.dts
+++ b/kernel/arch/arm64/boot/dts/xilinx/zynqmp-zcu102-revA.dts
@@ -2,7 +2,7 @@
/*
* dts file for Xilinx ZynqMP ZCU102 RevA
*
- * (C) Copyright 2015 - 2018, Xilinx, Inc.
+ * (C) Copyright 2015 - 2019, Xilinx, Inc.
*
* Michal Simek <michal.simek@xilinx.com>
*/
@@ -10,7 +10,7 @@
/dts-v1/;
#include "zynqmp.dtsi"
-#include "zynqmp-clk.dtsi"
+#include "zynqmp-clk-ccf.dtsi"
#include <dt-bindings/input/input.h>
#include <dt-bindings/gpio/gpio.h>
@@ -46,7 +46,7 @@
label = "sw19";
gpios = <&gpio 22 GPIO_ACTIVE_HIGH>;
linux,code = <KEY_DOWN>;
- gpio-key,wakeup;
+ wakeup-source;
autorepeat;
};
};
@@ -58,6 +58,79 @@
gpios = <&gpio 23 GPIO_ACTIVE_HIGH>;
linux,default-trigger = "heartbeat";
};
+ };
+
+ ina226-u76 {
+ compatible = "iio-hwmon";
+ io-channels = <&u76 0>, <&u76 1>, <&u76 2>, <&u76 3>;
+ };
+ ina226-u77 {
+ compatible = "iio-hwmon";
+ io-channels = <&u77 0>, <&u77 1>, <&u77 2>, <&u77 3>;
+ };
+ ina226-u78 {
+ compatible = "iio-hwmon";
+ io-channels = <&u78 0>, <&u78 1>, <&u78 2>, <&u78 3>;
+ };
+ ina226-u87 {
+ compatible = "iio-hwmon";
+ io-channels = <&u87 0>, <&u87 1>, <&u87 2>, <&u87 3>;
+ };
+ ina226-u85 {
+ compatible = "iio-hwmon";
+ io-channels = <&u85 0>, <&u85 1>, <&u85 2>, <&u85 3>;
+ };
+ ina226-u86 {
+ compatible = "iio-hwmon";
+ io-channels = <&u86 0>, <&u86 1>, <&u86 2>, <&u86 3>;
+ };
+ ina226-u93 {
+ compatible = "iio-hwmon";
+ io-channels = <&u93 0>, <&u93 1>, <&u93 2>, <&u93 3>;
+ };
+ ina226-u88 {
+ compatible = "iio-hwmon";
+ io-channels = <&u88 0>, <&u88 1>, <&u88 2>, <&u88 3>;
+ };
+ ina226-u15 {
+ compatible = "iio-hwmon";
+ io-channels = <&u15 0>, <&u15 1>, <&u15 2>, <&u15 3>;
+ };
+ ina226-u92 {
+ compatible = "iio-hwmon";
+ io-channels = <&u92 0>, <&u92 1>, <&u92 2>, <&u92 3>;
+ };
+ ina226-u79 {
+ compatible = "iio-hwmon";
+ io-channels = <&u79 0>, <&u79 1>, <&u79 2>, <&u79 3>;
+ };
+ ina226-u81 {
+ compatible = "iio-hwmon";
+ io-channels = <&u81 0>, <&u81 1>, <&u81 2>, <&u81 3>;
+ };
+ ina226-u80 {
+ compatible = "iio-hwmon";
+ io-channels = <&u80 0>, <&u80 1>, <&u80 2>, <&u80 3>;
+ };
+ ina226-u84 {
+ compatible = "iio-hwmon";
+ io-channels = <&u84 0>, <&u84 1>, <&u84 2>, <&u84 3>;
+ };
+ ina226-u16 {
+ compatible = "iio-hwmon";
+ io-channels = <&u16 0>, <&u16 1>, <&u16 2>, <&u16 3>;
+ };
+ ina226-u65 {
+ compatible = "iio-hwmon";
+ io-channels = <&u65 0>, <&u65 1>, <&u65 2>, <&u65 3>;
+ };
+ ina226-u74 {
+ compatible = "iio-hwmon";
+ io-channels = <&u74 0>, <&u74 1>, <&u74 2>, <&u74 3>;
+ };
+ ina226-u75 {
+ compatible = "iio-hwmon";
+ io-channels = <&u75 0>, <&u75 1>, <&u75 2>, <&u75 3>;
};
};
@@ -105,11 +178,12 @@
status = "okay";
phy-handle = <&phy0>;
phy-mode = "rgmii-id";
- phy0: phy@21 {
+ phy0: ethernet-phy@21 {
reg = <21>;
ti,rx-internal-delay = <0x8>;
ti,tx-internal-delay = <0xa>;
ti,fifo-depth = <0x1>;
+ ti,dp83867-rxctrl-strap-quirk;
};
};
@@ -124,40 +198,30 @@
tca6416_u97: gpio@20 {
compatible = "ti,tca6416";
reg = <0x20>;
- gpio-controller;
+ gpio-controller; /* IRQ not connected */
#gpio-cells = <2>;
- /*
- * IRQ not connected
- * Lines:
- * 0 - PS_GTR_LAN_SEL0
- * 1 - PS_GTR_LAN_SEL1
- * 2 - PS_GTR_LAN_SEL2
- * 3 - PS_GTR_LAN_SEL3
- * 4 - PCI_CLK_DIR_SEL
- * 5 - IIC_MUX_RESET_B
- * 6 - GEM3_EXP_RESET_B
- * 7, 10 - 17 - not connected
- */
-
- gtr-sel0 {
+ gpio-line-names = "PS_GTR_LAN_SEL0", "PS_GTR_LAN_SEL1", "PS_GTR_LAN_SEL2", "PS_GTR_LAN_SEL3",
+ "PCI_CLK_DIR_SEL", "IIC_MUX_RESET_B", "GEM3_EXP_RESET_B",
+ "", "", "", "", "", "", "", "", "";
+ gtr-sel0-hog {
gpio-hog;
gpios = <0 0>;
output-low; /* PCIE = 0, DP = 1 */
line-name = "sel0";
};
- gtr-sel1 {
+ gtr-sel1-hog {
gpio-hog;
gpios = <1 0>;
output-high; /* PCIE = 0, DP = 1 */
line-name = "sel1";
};
- gtr-sel2 {
+ gtr-sel2-hog {
gpio-hog;
gpios = <2 0>;
output-high; /* PCIE = 0, USB0 = 1 */
line-name = "sel2";
};
- gtr-sel3 {
+ gtr-sel3-hog {
gpio-hog;
gpios = <3 0>;
output-high; /* PCIE = 0, SATA = 1 */
@@ -168,27 +232,12 @@
tca6416_u61: gpio@21 {
compatible = "ti,tca6416";
reg = <0x21>;
- gpio-controller;
+ gpio-controller; /* IRQ not connected */
#gpio-cells = <2>;
- /*
- * IRQ not connected
- * Lines:
- * 0 - VCCPSPLL_EN
- * 1 - MGTRAVCC_EN
- * 2 - MGTRAVTT_EN
- * 3 - VCCPSDDRPLL_EN
- * 4 - MIO26_PMU_INPUT_LS
- * 5 - PL_PMBUS_ALERT
- * 6 - PS_PMBUS_ALERT
- * 7 - MAXIM_PMBUS_ALERT
- * 10 - PL_DDR4_VTERM_EN
- * 11 - PL_DDR4_VPP_2V5_EN
- * 12 - PS_DIMM_VDDQ_TO_PSVCCO_ON
- * 13 - PS_DIMM_SUSPEND_EN
- * 14 - PS_DDR4_VTERM_EN
- * 15 - PS_DDR4_VPP_2V5_EN
- * 16 - 17 - not connected
- */
+ gpio-line-names = "VCCPSPLL_EN", "MGTRAVCC_EN", "MGTRAVTT_EN", "VCCPSDDRPLL_EN", "MIO26_PMU_INPUT_LS",
+ "PL_PMBUS_ALERT", "PS_PMBUS_ALERT", "MAXIM_PMBUS_ALERT", "PL_DDR4_VTERM_EN",
+ "PL_DDR4_VPP_2V5_EN", "PS_DIMM_VDDQ_TO_PSVCCO_ON", "PS_DIMM_SUSPEND_EN",
+ "PS_DDR4_VTERM_EN", "PS_DDR4_VPP_2V5_EN", "", "";
};
i2c-mux@75 { /* u60 */
@@ -201,53 +250,73 @@
#size-cells = <0>;
reg = <0>;
/* PS_PMBUS */
- ina226@40 { /* u76 */
+ u76: ina226@40 { /* u76 */
compatible = "ti,ina226";
+ #io-channel-cells = <1>;
+ label = "ina226-u76";
reg = <0x40>;
shunt-resistor = <5000>;
};
- ina226@41 { /* u77 */
+ u77: ina226@41 { /* u77 */
compatible = "ti,ina226";
+ #io-channel-cells = <1>;
+ label = "ina226-u77";
reg = <0x41>;
shunt-resistor = <5000>;
};
- ina226@42 { /* u78 */
+ u78: ina226@42 { /* u78 */
compatible = "ti,ina226";
+ #io-channel-cells = <1>;
+ label = "ina226-u78";
reg = <0x42>;
shunt-resistor = <5000>;
};
- ina226@43 { /* u87 */
+ u87: ina226@43 { /* u87 */
compatible = "ti,ina226";
+ #io-channel-cells = <1>;
+ label = "ina226-u87";
reg = <0x43>;
shunt-resistor = <5000>;
};
- ina226@44 { /* u85 */
+ u85: ina226@44 { /* u85 */
compatible = "ti,ina226";
+ #io-channel-cells = <1>;
+ label = "ina226-u85";
reg = <0x44>;
shunt-resistor = <5000>;
};
- ina226@45 { /* u86 */
+ u86: ina226@45 { /* u86 */
compatible = "ti,ina226";
+ #io-channel-cells = <1>;
+ label = "ina226-u86";
reg = <0x45>;
shunt-resistor = <5000>;
};
- ina226@46 { /* u93 */
+ u93: ina226@46 { /* u93 */
compatible = "ti,ina226";
+ #io-channel-cells = <1>;
+ label = "ina226-u93";
reg = <0x46>;
shunt-resistor = <5000>;
};
- ina226@47 { /* u88 */
+ u88: ina226@47 { /* u88 */
compatible = "ti,ina226";
+ #io-channel-cells = <1>;
+ label = "ina226-u88";
reg = <0x47>;
shunt-resistor = <5000>;
};
- ina226@4a { /* u15 */
+ u15: ina226@4a { /* u15 */
compatible = "ti,ina226";
+ #io-channel-cells = <1>;
+ label = "ina226-u15";
reg = <0x4a>;
shunt-resistor = <5000>;
};
- ina226@4b { /* u92 */
+ u92: ina226@4b { /* u92 */
compatible = "ti,ina226";
+ #io-channel-cells = <1>;
+ label = "ina226-u92";
reg = <0x4b>;
shunt-resistor = <5000>;
};
@@ -257,43 +326,59 @@
#size-cells = <0>;
reg = <1>;
/* PL_PMBUS */
- ina226@40 { /* u79 */
+ u79: ina226@40 { /* u79 */
compatible = "ti,ina226";
+ #io-channel-cells = <1>;
+ label = "ina226-u79";
reg = <0x40>;
shunt-resistor = <2000>;
};
- ina226@41 { /* u81 */
+ u81: ina226@41 { /* u81 */
compatible = "ti,ina226";
+ #io-channel-cells = <1>;
+ label = "ina226-u81";
reg = <0x41>;
shunt-resistor = <5000>;
};
- ina226@42 { /* u80 */
+ u80: ina226@42 { /* u80 */
compatible = "ti,ina226";
+ #io-channel-cells = <1>;
+ label = "ina226-u80";
reg = <0x42>;
shunt-resistor = <5000>;
};
- ina226@43 { /* u84 */
+ u84: ina226@43 { /* u84 */
compatible = "ti,ina226";
+ #io-channel-cells = <1>;
+ label = "ina226-u84";
reg = <0x43>;
shunt-resistor = <5000>;
};
- ina226@44 { /* u16 */
+ u16: ina226@44 { /* u16 */
compatible = "ti,ina226";
+ #io-channel-cells = <1>;
+ label = "ina226-u16";
reg = <0x44>;
shunt-resistor = <5000>;
};
- ina226@45 { /* u65 */
+ u65: ina226@45 { /* u65 */
compatible = "ti,ina226";
+ #io-channel-cells = <1>;
+ label = "ina226-u65";
reg = <0x45>;
shunt-resistor = <5000>;
};
- ina226@46 { /* u74 */
+ u74: ina226@46 { /* u74 */
compatible = "ti,ina226";
+ #io-channel-cells = <1>;
+ label = "ina226-u74";
reg = <0x46>;
shunt-resistor = <5000>;
};
- ina226@47 { /* u75 */
+ u75: ina226@47 { /* u75 */
compatible = "ti,ina226";
+ #io-channel-cells = <1>;
+ label = "ina226-u75";
reg = <0x47>;
shunt-resistor = <5000>;
};
@@ -413,6 +498,7 @@
temperature-stability = <50>;
factory-fout = <300000000>;
clock-frequency = <300000000>;
+ clock-output-names = "si570_user";
};
};
i2c@3 {
@@ -426,6 +512,7 @@
temperature-stability = <50>; /* copy from zc702 */
factory-fout = <156250000>;
clock-frequency = <148500000>;
+ clock-output-names = "si570_mgt";
};
};
i2c@4 {
@@ -539,6 +626,7 @@
/* ULPI SMSC USB3320 */
&usb0 {
status = "okay";
+ dr_mode = "host";
};
&watchdog0 {
--
Gitblit v1.6.2