From 01573e231f18eb2d99162747186f59511f56b64d Mon Sep 17 00:00:00 2001
From: hc <hc@nodka.com>
Date: Fri, 08 Dec 2023 10:40:48 +0000
Subject: [PATCH] 移去rt
---
kernel/sound/soc/codecs/wm8903.c | 32 +++++++++++++++-----------------
1 files changed, 15 insertions(+), 17 deletions(-)
diff --git a/kernel/sound/soc/codecs/wm8903.c b/kernel/sound/soc/codecs/wm8903.c
index 6cb3c15..09f4980 100644
--- a/kernel/sound/soc/codecs/wm8903.c
+++ b/kernel/sound/soc/codecs/wm8903.c
@@ -1,3 +1,4 @@
+// SPDX-License-Identifier: GPL-2.0-only
/*
* wm8903.c -- WM8903 ALSA SoC Audio driver
*
@@ -5,10 +6,6 @@
* Copyright 2011-2012 NVIDIA, Inc.
*
* Author: Mark Brown <broonie@opensource.wolfsonmicro.com>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
*
* TODO:
* - TDM mode configuration.
@@ -345,7 +342,7 @@
if (!(wm8903->dcs_pending & (1 << i)))
continue;
- val = snd_soc_component_read32(component,
+ val = snd_soc_component_read(component,
WM8903_DC_SERVO_READBACK_1 + i);
dev_dbg(component->dev, "DC servo %d: %x\n",
3 - i, val);
@@ -378,7 +375,7 @@
u16 reg;
int ret;
- reg = snd_soc_component_read32(component, WM8903_CLASS_W_0);
+ reg = snd_soc_component_read(component, WM8903_CLASS_W_0);
/* Turn it off if we're about to enable bypass */
if (ucontrol->value.integer.value[0]) {
@@ -1227,7 +1224,7 @@
unsigned int fmt)
{
struct snd_soc_component *component = codec_dai->component;
- u16 aif1 = snd_soc_component_read32(component, WM8903_AUDIO_INTERFACE_1);
+ u16 aif1 = snd_soc_component_read(component, WM8903_AUDIO_INTERFACE_1);
aif1 &= ~(WM8903_LRCLK_DIR | WM8903_BCLK_DIR | WM8903_AIF_FMT_MASK |
WM8903_AIF_LRCLK_INV | WM8903_AIF_BCLK_INV);
@@ -1310,12 +1307,12 @@
return 0;
}
-static int wm8903_digital_mute(struct snd_soc_dai *codec_dai, int mute)
+static int wm8903_mute(struct snd_soc_dai *codec_dai, int mute, int direction)
{
struct snd_soc_component *component = codec_dai->component;
u16 reg;
- reg = snd_soc_component_read32(component, WM8903_DAC_DIGITAL_1);
+ reg = snd_soc_component_read(component, WM8903_DAC_DIGITAL_1);
if (mute)
reg |= WM8903_DAC_MUTE;
@@ -1454,12 +1451,12 @@
int cur_val;
int clk_sys;
- u16 aif1 = snd_soc_component_read32(component, WM8903_AUDIO_INTERFACE_1);
- u16 aif2 = snd_soc_component_read32(component, WM8903_AUDIO_INTERFACE_2);
- u16 aif3 = snd_soc_component_read32(component, WM8903_AUDIO_INTERFACE_3);
- u16 clock0 = snd_soc_component_read32(component, WM8903_CLOCK_RATES_0);
- u16 clock1 = snd_soc_component_read32(component, WM8903_CLOCK_RATES_1);
- u16 dac_digital1 = snd_soc_component_read32(component, WM8903_DAC_DIGITAL_1);
+ u16 aif1 = snd_soc_component_read(component, WM8903_AUDIO_INTERFACE_1);
+ u16 aif2 = snd_soc_component_read(component, WM8903_AUDIO_INTERFACE_2);
+ u16 aif3 = snd_soc_component_read(component, WM8903_AUDIO_INTERFACE_3);
+ u16 clock0 = snd_soc_component_read(component, WM8903_CLOCK_RATES_0);
+ u16 clock1 = snd_soc_component_read(component, WM8903_CLOCK_RATES_1);
+ u16 dac_digital1 = snd_soc_component_read(component, WM8903_DAC_DIGITAL_1);
/* Enable sloping stopband filter for low sample rates */
if (fs <= 24000)
@@ -1740,9 +1737,10 @@
static const struct snd_soc_dai_ops wm8903_dai_ops = {
.hw_params = wm8903_hw_params,
- .digital_mute = wm8903_digital_mute,
+ .mute_stream = wm8903_mute,
.set_fmt = wm8903_set_dai_fmt,
.set_sysclk = wm8903_set_dai_sysclk,
+ .no_capture_mute = 1,
};
static struct snd_soc_dai_driver wm8903_dai = {
@@ -1930,7 +1928,7 @@
* We assume the controller imposes no restrictions,
* so we are able to select active-high
*/
- /* Fall-through */
+ fallthrough;
case IRQ_TYPE_LEVEL_HIGH:
pdata->irq_active_low = false;
break;
--
Gitblit v1.6.2