From 01573e231f18eb2d99162747186f59511f56b64d Mon Sep 17 00:00:00 2001
From: hc <hc@nodka.com>
Date: Fri, 08 Dec 2023 10:40:48 +0000
Subject: [PATCH] 移去rt
---
kernel/sound/soc/codecs/da7210.c | 43 ++++++++++++++++++++++++-------------------
1 files changed, 24 insertions(+), 19 deletions(-)
diff --git a/kernel/sound/soc/codecs/da7210.c b/kernel/sound/soc/codecs/da7210.c
index e172913..4544ed8 100644
--- a/kernel/sound/soc/codecs/da7210.c
+++ b/kernel/sound/soc/codecs/da7210.c
@@ -330,7 +330,7 @@
if (ucontrol->value.integer.value[0]) {
/* Check if noise suppression is enabled */
- if (snd_soc_component_read32(component, DA7210_CONTROL) & DA7210_NOISE_SUP_EN) {
+ if (snd_soc_component_read(component, DA7210_CONTROL) & DA7210_NOISE_SUP_EN) {
dev_dbg(component->dev,
"Disable noise suppression to enable ALC\n");
return -EINVAL;
@@ -354,27 +354,27 @@
if (ucontrol->value.integer.value[0]) {
/* Check if ALC is enabled */
- if (snd_soc_component_read32(component, DA7210_ADC) & DA7210_ADC_ALC_EN)
+ if (snd_soc_component_read(component, DA7210_ADC) & DA7210_ADC_ALC_EN)
goto err;
/* Check ZC for HP and AUX1 PGA */
- if ((snd_soc_component_read32(component, DA7210_ZERO_CROSS) &
+ if ((snd_soc_component_read(component, DA7210_ZERO_CROSS) &
(DA7210_AUX1_L_ZC | DA7210_AUX1_R_ZC | DA7210_HP_L_ZC |
DA7210_HP_R_ZC)) != (DA7210_AUX1_L_ZC |
DA7210_AUX1_R_ZC | DA7210_HP_L_ZC | DA7210_HP_R_ZC))
goto err;
/* Check INPGA_L_VOL and INPGA_R_VOL */
- val = snd_soc_component_read32(component, DA7210_IN_GAIN);
+ val = snd_soc_component_read(component, DA7210_IN_GAIN);
if (((val & DA7210_INPGA_L_VOL) < DA7210_INPGA_MIN_VOL_NS) ||
(((val & DA7210_INPGA_R_VOL) >> 4) <
DA7210_INPGA_MIN_VOL_NS))
goto err;
/* Check AUX1_L_VOL and AUX1_R_VOL */
- if (((snd_soc_component_read32(component, DA7210_AUX1_L) & DA7210_AUX1_L_VOL) <
+ if (((snd_soc_component_read(component, DA7210_AUX1_L) & DA7210_AUX1_L_VOL) <
DA7210_AUX1_MIN_VOL_NS) ||
- ((snd_soc_component_read32(component, DA7210_AUX1_R) & DA7210_AUX1_R_VOL) <
+ ((snd_soc_component_read(component, DA7210_AUX1_R) & DA7210_AUX1_R_VOL) <
DA7210_AUX1_MIN_VOL_NS))
goto err;
}
@@ -767,7 +767,7 @@
/* Enable DAI */
snd_soc_component_write(component, DA7210_DAI_CFG3, DA7210_DAI_OE | DA7210_DAI_EN);
- dai_cfg1 = 0xFC & snd_soc_component_read32(component, DA7210_DAI_CFG1);
+ dai_cfg1 = 0xFC & snd_soc_component_read(component, DA7210_DAI_CFG1);
switch (params_width(params)) {
case 16:
@@ -874,11 +874,11 @@
u32 dai_cfg1;
u32 dai_cfg3;
- dai_cfg1 = 0x7f & snd_soc_component_read32(component, DA7210_DAI_CFG1);
- dai_cfg3 = 0xfc & snd_soc_component_read32(component, DA7210_DAI_CFG3);
+ dai_cfg1 = 0x7f & snd_soc_component_read(component, DA7210_DAI_CFG1);
+ dai_cfg3 = 0xfc & snd_soc_component_read(component, DA7210_DAI_CFG3);
- if ((snd_soc_component_read32(component, DA7210_PLL) & DA7210_PLL_EN) &&
- (!(snd_soc_component_read32(component, DA7210_PLL_DIV3) & DA7210_PLL_BYP)))
+ if ((snd_soc_component_read(component, DA7210_PLL) & DA7210_PLL_EN) &&
+ (!(snd_soc_component_read(component, DA7210_PLL_DIV3) & DA7210_PLL_BYP)))
return -EINVAL;
switch (fmt & SND_SOC_DAIFMT_MASTER_MASK) {
@@ -924,10 +924,10 @@
return 0;
}
-static int da7210_mute(struct snd_soc_dai *dai, int mute)
+static int da7210_mute(struct snd_soc_dai *dai, int mute, int direction)
{
struct snd_soc_component *component = dai->component;
- u8 mute_reg = snd_soc_component_read32(component, DA7210_DAC_HPF) & 0xFB;
+ u8 mute_reg = snd_soc_component_read(component, DA7210_DAC_HPF) & 0xFB;
if (mute)
snd_soc_component_write(component, DA7210_DAC_HPF, mute_reg | 0x4);
@@ -971,14 +971,16 @@
/**
* da7210_set_dai_pll :Configure the codec PLL
- * @param codec_dai : pointer to codec DAI
- * @param pll_id : da7210 has only one pll, so pll_id is always zero
- * @param fref : MCLK frequency, should be < 20MHz
- * @param fout : FsDM value, Refer page 44 & 45 of datasheet
- * @return int : Zero for success, negative error code for error
+ * @codec_dai: pointer to codec DAI
+ * @pll_id: da7210 has only one pll, so pll_id is always zero
+ * @source: clock source
+ * @fref: MCLK frequency, should be < 20MHz
+ * @fout: FsDM value, Refer page 44 & 45 of datasheet
*
* Note: Supported PLL input frequencies are 12MHz, 13MHz, 13.5MHz, 14.4MHz,
* 19.2MHz, 19.6MHz and 19.8MHz
+ *
+ * Return: Zero for success, negative error code for error
*/
static int da7210_set_dai_pll(struct snd_soc_dai *codec_dai, int pll_id,
int source, unsigned int fref, unsigned int fout)
@@ -1034,7 +1036,8 @@
.set_fmt = da7210_set_dai_fmt,
.set_sysclk = da7210_set_dai_sysclk,
.set_pll = da7210_set_dai_pll,
- .digital_mute = da7210_mute,
+ .mute_stream = da7210_mute,
+ .no_capture_mute = 1,
};
static struct snd_soc_dai_driver da7210_dai = {
@@ -1333,6 +1336,8 @@
int ret = 0;
#if IS_ENABLED(CONFIG_I2C)
ret = i2c_add_driver(&da7210_i2c_driver);
+ if (ret)
+ return ret;
#endif
#if defined(CONFIG_SPI_MASTER)
ret = spi_register_driver(&da7210_spi_driver);
--
Gitblit v1.6.2