From 01573e231f18eb2d99162747186f59511f56b64d Mon Sep 17 00:00:00 2001
From: hc <hc@nodka.com>
Date: Fri, 08 Dec 2023 10:40:48 +0000
Subject: [PATCH] 移去rt
---
kernel/arch/x86/xen/setup.c | 78 +++++++++++++--------------------------
1 files changed, 26 insertions(+), 52 deletions(-)
diff --git a/kernel/arch/x86/xen/setup.c b/kernel/arch/x86/xen/setup.c
index 075ed47..1f80dd3 100644
--- a/kernel/arch/x86/xen/setup.c
+++ b/kernel/arch/x86/xen/setup.c
@@ -12,6 +12,7 @@
#include <linux/memblock.h>
#include <linux/cpuidle.h>
#include <linux/cpufreq.h>
+#include <linux/memory_hotplug.h>
#include <asm/elf.h>
#include <asm/vdso.h>
@@ -19,6 +20,7 @@
#include <asm/setup.h>
#include <asm/acpi.h>
#include <asm/numa.h>
+#include <asm/idtentry.h>
#include <asm/xen/hypervisor.h>
#include <asm/xen/hypercall.h>
@@ -30,7 +32,6 @@
#include <xen/features.h>
#include <xen/hvc-console.h>
#include "xen-ops.h"
-#include "vdso.h"
#include "mmu.h"
#define GB(x) ((uint64_t)(x) * 1024 * 1024 * 1024)
@@ -58,13 +59,13 @@
} xen_remap_buf __initdata __aligned(PAGE_SIZE);
static unsigned long xen_remap_mfn __initdata = INVALID_P2M_ENTRY;
-/*
+/*
* The maximum amount of extra memory compared to the base size. The
* main scaling factor is the size of struct page. At extreme ratios
* of base:extra, all the base memory can be filled with page
* structures for the extra memory, leaving no space for anything
* else.
- *
+ *
* 10x seems like a reasonable balance between scaling flexibility and
* leaving a practically usable system.
*/
@@ -411,7 +412,7 @@
remap_range_size = xen_find_pfn_range(&remap_pfn);
if (!remap_range_size) {
- pr_warning("Unable to find available pfn range, not remapping identity pages\n");
+ pr_warn("Unable to find available pfn range, not remapping identity pages\n");
xen_set_identity_and_release_chunk(cur_pfn,
cur_pfn + left, nr_pages);
break;
@@ -493,7 +494,7 @@
* The remap information (which mfn remap to which pfn) is contained in the
* to be remapped memory itself in a linked list anchored at xen_remap_mfn.
* This scheme allows to remap the different chunks in arbitrary order while
- * the resulting mapping will be independant from the order.
+ * the resulting mapping will be independent from the order.
*/
void __init xen_remap_memory(void)
{
@@ -543,13 +544,10 @@
{
unsigned long limit;
-#ifdef CONFIG_X86_32
- limit = GB(64) / PAGE_SIZE;
-#else
limit = MAXMEM / PAGE_SIZE;
if (!xen_initial_domain() && xen_512gb_limit)
limit = GB(512) / PAGE_SIZE;
-#endif
+
return limit;
}
@@ -589,6 +587,14 @@
if (type == E820_TYPE_RAM) {
start = PAGE_ALIGN(start);
end &= ~((phys_addr_t)PAGE_SIZE - 1);
+#ifdef CONFIG_MEMORY_HOTPLUG
+ /*
+ * Don't allow adding memory not in E820 map while booting the
+ * system. Once the balloon driver is up it will remove that
+ * restriction again.
+ */
+ max_mem_size = end;
+#endif
}
e820__range_add(start, end - start, type);
@@ -712,17 +718,8 @@
if (!xen_is_e820_reserved(start, size))
return;
-#ifdef CONFIG_X86_32
- /*
- * Relocating the p2m on 32 bit system to an arbitrary virtual address
- * is not supported, so just give up.
- */
- xen_raw_console_write("Xen hypervisor allocated p2m list conflicts with E820 map\n");
- BUG();
-#else
xen_relocate_p2m();
memblock_free(start, size);
-#endif
}
/**
@@ -747,6 +744,10 @@
memmap.nr_entries = ARRAY_SIZE(xen_e820_table.entries);
set_xen_guest_handle(memmap.buffer, xen_e820_table.entries);
+
+#if defined(CONFIG_MEMORY_HOTPLUG) && defined(CONFIG_XEN_BALLOON)
+ xen_saved_max_mem_size = max_mem_size;
+#endif
op = xen_initial_domain() ?
XENMEM_machine_memory_map :
@@ -790,17 +791,10 @@
/*
* Clamp the amount of extra memory to a EXTRA_MEM_RATIO
- * factor the base size. On non-highmem systems, the base
- * size is the full initial memory allocation; on highmem it
- * is limited to the max size of lowmem, so that it doesn't
- * get completely filled.
+ * factor the base size.
*
* Make sure we have no memory above max_pages, as this area
* isn't handled by the p2m management.
- *
- * In principle there could be a problem in lowmem systems if
- * the initial memory is also very large with respect to
- * lowmem, but we won't try to deal with that here.
*/
extra_pages = min3(EXTRA_MEM_RATIO * min(max_pfn, PFN_DOWN(MAXMEM)),
extra_pages, max_pages - max_pfn);
@@ -907,20 +901,6 @@
return "Xen";
}
-/*
- * Set the bit indicating "nosegneg" library variants should be used.
- * We only need to bother in pure 32-bit mode; compat 32-bit processes
- * can have un-truncated segments, so wrapping around is allowed.
- */
-static void __init fiddle_vdso(void)
-{
-#ifdef CONFIG_X86_32
- u32 *mask = vdso_image_32.data +
- vdso_image_32.sym_VDSO32_NOTE_MASK;
- *mask |= 1 << VDSO_NOTE_NONEGSEG_BIT;
-#endif
-}
-
static int register_callback(unsigned type, const void *func)
{
struct callback_register callback = {
@@ -937,26 +917,21 @@
int ret;
unsigned sysenter_feature;
-#ifdef CONFIG_X86_32
- sysenter_feature = X86_FEATURE_SEP;
-#else
sysenter_feature = X86_FEATURE_SYSENTER32;
-#endif
if (!boot_cpu_has(sysenter_feature))
return;
- ret = register_callback(CALLBACKTYPE_sysenter, xen_sysenter_target);
+ ret = register_callback(CALLBACKTYPE_sysenter, xen_entry_SYSENTER_compat);
if(ret != 0)
setup_clear_cpu_cap(sysenter_feature);
}
void xen_enable_syscall(void)
{
-#ifdef CONFIG_X86_64
int ret;
- ret = register_callback(CALLBACKTYPE_syscall, xen_syscall_target);
+ ret = register_callback(CALLBACKTYPE_syscall, xen_entry_SYSCALL_64);
if (ret != 0) {
printk(KERN_ERR "Failed to set syscall callback: %d\n", ret);
/* Pretty fatal; 64-bit userspace has no other
@@ -965,14 +940,13 @@
if (boot_cpu_has(X86_FEATURE_SYSCALL32)) {
ret = register_callback(CALLBACKTYPE_syscall32,
- xen_syscall32_target);
+ xen_entry_SYSCALL_compat);
if (ret != 0)
setup_clear_cpu_cap(X86_FEATURE_SYSCALL32);
}
-#endif /* CONFIG_X86_64 */
}
-void __init xen_pvmmu_arch_setup(void)
+static void __init xen_pvmmu_arch_setup(void)
{
HYPERVISOR_vm_assist(VMASST_CMD_enable, VMASST_TYPE_4gb_segments);
HYPERVISOR_vm_assist(VMASST_CMD_enable, VMASST_TYPE_writable_pagetables);
@@ -980,7 +954,8 @@
HYPERVISOR_vm_assist(VMASST_CMD_enable,
VMASST_TYPE_pae_extended_cr3);
- if (register_callback(CALLBACKTYPE_event, xen_hypervisor_callback) ||
+ if (register_callback(CALLBACKTYPE_event,
+ xen_asm_exc_xen_hypervisor_callback) ||
register_callback(CALLBACKTYPE_failsafe, xen_failsafe_callback))
BUG();
@@ -1009,7 +984,6 @@
disable_cpuidle();
disable_cpufreq();
WARN_ON(xen_set_default_idle());
- fiddle_vdso();
#ifdef CONFIG_NUMA
numa_off = 1;
#endif
--
Gitblit v1.6.2