From 01573e231f18eb2d99162747186f59511f56b64d Mon Sep 17 00:00:00 2001
From: hc <hc@nodka.com>
Date: Fri, 08 Dec 2023 10:40:48 +0000
Subject: [PATCH] 移去rt
---
kernel/arch/arc/mm/tlb.c | 110 +++++++++++++++++++++---------------------------------
1 files changed, 43 insertions(+), 67 deletions(-)
diff --git a/kernel/arch/arc/mm/tlb.c b/kernel/arch/arc/mm/tlb.c
index fa18c00..9c7c682 100644
--- a/kernel/arch/arc/mm/tlb.c
+++ b/kernel/arch/arc/mm/tlb.c
@@ -1,11 +1,8 @@
+// SPDX-License-Identifier: GPL-2.0-only
/*
* TLB Management (flush/create/diagnostics) for ARC700
*
* Copyright (C) 2004, 2007-2010, 2011-2012 Synopsys, Inc. (www.synopsys.com)
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
*
* vineetg: Aug 2011
* -Reintroduce duplicate PD fixup - some customer chips still have the issue
@@ -33,14 +30,14 @@
* -Changes related to MMU v2 (Rel 4.8)
*
* Vineetg: Aug 29th 2008
- * -In TLB Flush operations (Metal Fix MMU) there is a explict command to
+ * -In TLB Flush operations (Metal Fix MMU) there is a explicit command to
* flush Micro-TLBS. If TLB Index Reg is invalid prior to TLBIVUTLB cmd,
* it fails. Thus need to load it with ANY valid value before invoking
* TLBIVUTLB cmd
*
* Vineetg: Aug 21th 2008:
* -Reduced the duration of IRQ lockouts in TLB Flush routines
- * -Multiple copies of TLB erase code seperated into a "single" function
+ * -Multiple copies of TLB erase code separated into a "single" function
* -In TLB Flush routines, interrupt disabling moved UP to retrieve ASID
* in interrupt-safe region.
*
@@ -69,7 +66,7 @@
*
* Although J-TLB is 2 way set assoc, ARC700 caches J-TLB into uTLBS which has
* much higher associativity. u-D-TLB is 8 ways, u-I-TLB is 4 ways.
- * Given this, the thrasing problem should never happen because once the 3
+ * Given this, the thrashing problem should never happen because once the 3
* J-TLB entries are created (even though 3rd will knock out one of the prev
* two), the u-D-TLB and u-I-TLB will have what is required to accomplish memcpy
*
@@ -121,6 +118,33 @@
write_aux_reg(ARC_REG_TLBCOMMAND, TLBWrite);
}
+static void utlb_invalidate(void)
+{
+#if (CONFIG_ARC_MMU_VER >= 2)
+
+#if (CONFIG_ARC_MMU_VER == 2)
+ /* MMU v2 introduced the uTLB Flush command.
+ * There was however an obscure hardware bug, where uTLB flush would
+ * fail when a prior probe for J-TLB (both totally unrelated) would
+ * return lkup err - because the entry didn't exist in MMU.
+ * The Workaround was to set Index reg with some valid value, prior to
+ * flush. This was fixed in MMU v3
+ */
+ unsigned int idx;
+
+ /* make sure INDEX Reg is valid */
+ idx = read_aux_reg(ARC_REG_TLBINDEX);
+
+ /* If not write some dummy val */
+ if (unlikely(idx & TLB_LKUP_ERR))
+ write_aux_reg(ARC_REG_TLBINDEX, 0xa);
+#endif
+
+ write_aux_reg(ARC_REG_TLBCOMMAND, TLBIVUTLB);
+#endif
+
+}
+
#if (CONFIG_ARC_MMU_VER < 4)
static inline unsigned int tlb_entry_lkup(unsigned long vaddr_n_asid)
@@ -150,44 +174,6 @@
WARN(idx == TLB_DUP_ERR, "Probe returned Dup PD for %x\n",
vaddr_n_asid);
}
-}
-
-/****************************************************************************
- * ARC700 MMU caches recently used J-TLB entries (RAM) as uTLBs (FLOPs)
- *
- * New IVUTLB cmd in MMU v2 explictly invalidates the uTLB
- *
- * utlb_invalidate ( )
- * -For v2 MMU calls Flush uTLB Cmd
- * -For v1 MMU does nothing (except for Metal Fix v1 MMU)
- * This is because in v1 TLBWrite itself invalidate uTLBs
- ***************************************************************************/
-
-static void utlb_invalidate(void)
-{
-#if (CONFIG_ARC_MMU_VER >= 2)
-
-#if (CONFIG_ARC_MMU_VER == 2)
- /* MMU v2 introduced the uTLB Flush command.
- * There was however an obscure hardware bug, where uTLB flush would
- * fail when a prior probe for J-TLB (both totally unrelated) would
- * return lkup err - because the entry didn't exist in MMU.
- * The Workround was to set Index reg with some valid value, prior to
- * flush. This was fixed in MMU v3 hence not needed any more
- */
- unsigned int idx;
-
- /* make sure INDEX Reg is valid */
- idx = read_aux_reg(ARC_REG_TLBINDEX);
-
- /* If not write some dummy val */
- if (unlikely(idx & TLB_LKUP_ERR))
- write_aux_reg(ARC_REG_TLBINDEX, 0xa);
-#endif
-
- write_aux_reg(ARC_REG_TLBCOMMAND, TLBIVUTLB);
-#endif
-
}
static void tlb_entry_insert(unsigned int pd0, pte_t pd1)
@@ -221,11 +207,6 @@
}
#else /* CONFIG_ARC_MMU_VER >= 4) */
-
-static void utlb_invalidate(void)
-{
- /* No need since uTLB is always in sync with JTLB */
-}
static void tlb_entry_erase(unsigned int vaddr_n_asid)
{
@@ -270,7 +251,7 @@
for (entry = 0; entry < num_tlb; entry++) {
/* write this entry to the TLB */
write_aux_reg(ARC_REG_TLBINDEX, entry);
- write_aux_reg(ARC_REG_TLBCOMMAND, TLBWrite);
+ write_aux_reg(ARC_REG_TLBCOMMAND, TLBWriteNI);
}
if (IS_ENABLED(CONFIG_TRANSPARENT_HUGEPAGE)) {
@@ -281,7 +262,7 @@
for (entry = stlb_idx; entry < stlb_idx + 16; entry++) {
write_aux_reg(ARC_REG_TLBINDEX, entry);
- write_aux_reg(ARC_REG_TLBCOMMAND, TLBWrite);
+ write_aux_reg(ARC_REG_TLBCOMMAND, TLBWriteNI);
}
}
@@ -291,7 +272,7 @@
}
/*
- * Flush the entrie MM for userland. The fastest way is to move to Next ASID
+ * Flush the entire MM for userland. The fastest way is to move to Next ASID
*/
noinline void local_flush_tlb_mm(struct mm_struct *mm)
{
@@ -322,7 +303,7 @@
* Difference between this and Kernel Range Flush is
* -Here the fastest way (if range is too large) is to move to next ASID
* without doing any explicit Shootdown
- * -In case of kernel Flush, entry has to be shot down explictly
+ * -In case of kernel Flush, entry has to be shot down explicitly
*/
void local_flush_tlb_range(struct vm_area_struct *vma, unsigned long start,
unsigned long end)
@@ -358,8 +339,6 @@
}
}
- utlb_invalidate();
-
local_irq_restore(flags);
}
@@ -388,8 +367,6 @@
start += PAGE_SIZE;
}
- utlb_invalidate();
-
local_irq_restore(flags);
}
@@ -410,7 +387,6 @@
if (asid_mm(vma->vm_mm, cpu) != MM_CTXT_NO_ASID) {
tlb_entry_erase((page & PAGE_MASK) | hw_pid(vma->vm_mm, cpu));
- utlb_invalidate();
}
local_irq_restore(flags);
@@ -600,7 +576,7 @@
pte_t *ptep)
{
unsigned long vaddr = vaddr_unaligned & PAGE_MASK;
- phys_addr_t paddr = pte_val(*ptep) & PAGE_MASK;
+ phys_addr_t paddr = pte_val(*ptep) & PAGE_MASK_PHYS;
struct page *page = pfn_to_page(pte_pfn(*ptep));
create_tlb(vma, vaddr, ptep);
@@ -644,7 +620,7 @@
* Super Page size is configurable in hardware (4K to 16M), but fixed once
* RTL builds.
*
- * The exact THP size a Linx configuration will support is a function of:
+ * The exact THP size a Linux configuration will support is a function of:
* - MMU page size (typical 8K, RTL fixed)
* - software page walker address split between PGD:PTE:PFN (typical
* 11:8:13, but can be changed with 1 line)
@@ -722,7 +698,7 @@
#endif
-/* Read the Cache Build Confuration Registers, Decode them and save into
+/* Read the Cache Build Configuration Registers, Decode them and save into
* the cpuinfo structure for later use.
* No Validation is done here, simply read/convert the BCRs
*/
@@ -827,13 +803,13 @@
pr_info("%s", arc_mmu_mumbojumbo(0, str, sizeof(str)));
/*
- * Can't be done in processor.h due to header include depenedencies
+ * Can't be done in processor.h due to header include dependencies
*/
BUILD_BUG_ON(!IS_ALIGNED((CONFIG_ARC_KVADDR_SIZE << 20), PMD_SIZE));
/*
* stack top size sanity check,
- * Can't be done in processor.h due to header include depenedencies
+ * Can't be done in processor.h due to header include dependencies
*/
BUILD_BUG_ON(!IS_ALIGNED(STACK_TOP, PMD_SIZE));
@@ -871,7 +847,7 @@
write_aux_reg(ARC_REG_PID, MMU_ENABLE);
/* In smp we use this reg for interrupt 1 scratch */
-#ifndef CONFIG_SMP
+#ifdef ARC_USE_SCRATCH_REG
/* swapper_pg_dir is the pgd for the kernel, used by vmalloc */
write_aux_reg(ARC_REG_SCRATCH_DATA0, swapper_pg_dir);
#endif
@@ -905,7 +881,7 @@
* the duplicate one.
* -Knob to be verbose abt it.(TODO: hook them up to debugfs)
*/
-volatile int dup_pd_silent; /* Be slient abt it or complain (default) */
+volatile int dup_pd_silent; /* Be silent abt it or complain (default) */
void do_tlb_overlap_fault(unsigned long cause, unsigned long address,
struct pt_regs *regs)
@@ -972,7 +948,7 @@
/***********************************************************************
* Diagnostic Routines
- * -Called from Low Level TLB Hanlders if things don;t look good
+ * -Called from Low Level TLB Handlers if things don;t look good
**********************************************************************/
#ifdef CONFIG_ARC_DBG_TLB_PARANOIA
--
Gitblit v1.6.2