From 01573e231f18eb2d99162747186f59511f56b64d Mon Sep 17 00:00:00 2001
From: hc <hc@nodka.com>
Date: Fri, 08 Dec 2023 10:40:48 +0000
Subject: [PATCH] 移去rt

---
 kernel/Documentation/devicetree/bindings/pci/hisilicon-pcie.txt |   42 ------------------------------------------
 1 files changed, 0 insertions(+), 42 deletions(-)

diff --git a/kernel/Documentation/devicetree/bindings/pci/hisilicon-pcie.txt b/kernel/Documentation/devicetree/bindings/pci/hisilicon-pcie.txt
index 0dcb87d..d6796ef 100644
--- a/kernel/Documentation/devicetree/bindings/pci/hisilicon-pcie.txt
+++ b/kernel/Documentation/devicetree/bindings/pci/hisilicon-pcie.txt
@@ -41,45 +41,3 @@
 				 0x0 0 0 3 &mbigen_pcie 3 12
 				 0x0 0 0 4 &mbigen_pcie 4 13>;
 	};
-
-HiSilicon Hip06/Hip07 PCIe host bridge DT (almost-ECAM) description.
-
-Some BIOSes place the host controller in a mode where it is ECAM
-compliant for all devices other than the root complex. In such cases,
-the host controller should be described as below.
-
-The properties and their meanings are identical to those described in
-host-generic-pci.txt except as listed below.
-
-Properties of the host controller node that differ from
-host-generic-pci.txt:
-
-- compatible     : Must be "hisilicon,hip06-pcie-ecam", or
-		   "hisilicon,hip07-pcie-ecam"
-
-- reg            : Two entries: First the ECAM configuration space for any
-		   other bus underneath the root bus. Second, the base
-		   and size of the HiSilicon host bridge registers include
-		   the RC's own config space.
-
-Example:
-	pcie0: pcie@a0090000 {
-		compatible = "hisilicon,hip06-pcie-ecam";
-		reg = <0 0xb0000000 0 0x2000000>,  /*  ECAM configuration space */
-		      <0 0xa0090000 0 0x10000>; /* host bridge registers */
-		bus-range = <0  31>;
-		msi-map = <0x0000 &its_dsa 0x0000 0x2000>;
-		msi-map-mask = <0xffff>;
-		#address-cells = <3>;
-		#size-cells = <2>;
-		device_type = "pci";
-		dma-coherent;
-		ranges = <0x02000000 0 0xb2000000 0x0 0xb2000000 0 0x5ff0000
-			  0x01000000 0 0 0 0xb7ff0000 0 0x10000>;
-		#interrupt-cells = <1>;
-		interrupt-map-mask = <0xf800 0 0 7>;
-		interrupt-map = <0x0 0 0 1 &mbigen_pcie0 650 4
-				 0x0 0 0 2 &mbigen_pcie0 650 4
-				 0x0 0 0 3 &mbigen_pcie0 650 4
-				 0x0 0 0 4 &mbigen_pcie0 650 4>;
-	};

--
Gitblit v1.6.2