From 01573e231f18eb2d99162747186f59511f56b64d Mon Sep 17 00:00:00 2001 From: hc <hc@nodka.com> Date: Fri, 08 Dec 2023 10:40:48 +0000 Subject: [PATCH] 移去rt --- kernel/Documentation/ABI/stable/sysfs-driver-mlxreg-io | 181 +++++++++++++++++++++++++++++++++++++++++---- 1 files changed, 164 insertions(+), 17 deletions(-) diff --git a/kernel/Documentation/ABI/stable/sysfs-driver-mlxreg-io b/kernel/Documentation/ABI/stable/sysfs-driver-mlxreg-io index d9d117d..fd9a804 100644 --- a/kernel/Documentation/ABI/stable/sysfs-driver-mlxreg-io +++ b/kernel/Documentation/ABI/stable/sysfs-driver-mlxreg-io @@ -1,6 +1,4 @@ -What: /sys/devices/platform/mlxplat/mlxreg-io/hwmon/hwmon*/ - asic_health - +What: /sys/devices/platform/mlxplat/mlxreg-io/hwmon/hwmon*/asic_health Date: June 2018 KernelVersion: 4.19 Contact: Vadim Pasternak <vadimpmellanox.com> @@ -9,10 +7,8 @@ The files are read only. -What: /sys/devices/platform/mlxplat/mlxreg-io/hwmon/hwmon*/ - cpld1_version - cpld2_version - +What: /sys/devices/platform/mlxplat/mlxreg-io/hwmon/hwmon*/cpld1_version +What: /sys/devices/platform/mlxplat/mlxreg-io/hwmon/hwmon*/cpld2_version Date: June 2018 KernelVersion: 4.19 Contact: Vadim Pasternak <vadimpmellanox.com> @@ -20,6 +16,34 @@ on carrier and switch boards. The files are read only. + +What: /sys/devices/platform/mlxplat/mlxreg-io/hwmon/hwmon*/fan_dir +Date: December 2018 +KernelVersion: 5.0 +Contact: Vadim Pasternak <vadimpmellanox.com> +Description: This file shows the system fans direction: + forward direction - relevant bit is set 0; + reversed direction - relevant bit is set 1. + + The files are read only. + +What: /sys/devices/platform/mlxplat/mlxreg-io/hwmon/hwmon*/cpld3_version +Date: November 2018 +KernelVersion: 5.0 +Contact: Vadim Pasternak <vadimpmellanox.com> +Description: These files show with which CPLD versions have been burned + on LED or Gearbox board. + + The files are read only. + +What: /sys/devices/platform/mlxplat/mlxreg-io/hwmon/hwmon*/jtag_enable +Date: November 2018 +KernelVersion: 5.0 +Contact: Vadim Pasternak <vadimpmellanox.com> +Description: These files enable and disable the access to the JTAG domain. + By default access to the JTAG domain is disabled. + + The file is read/write. What: /sys/devices/platform/mlxplat/mlxreg-io/hwmon/hwmon*/select_iio Date: June 2018 @@ -54,16 +78,15 @@ The files are write only. -What: /sys/devices/platform/mlxplat/mlxreg-io/hwmon/hwmon*/ - reset_aux_pwr_or_ref - reset_asic_thermal - reset_hotswap_or_halt - reset_hotswap_or_wd - reset_fw_reset - reset_long_pb - reset_main_pwr_fail - reset_short_pb - reset_sw_reset +What: /sys/devices/platform/mlxplat/mlxreg-io/hwmon/hwmon*/reset_aux_pwr_or_ref +What: /sys/devices/platform/mlxplat/mlxreg-io/hwmon/hwmon*/reset_asic_thermal +What: /sys/devices/platform/mlxplat/mlxreg-io/hwmon/hwmon*/reset_hotswap_or_halt +What: /sys/devices/platform/mlxplat/mlxreg-io/hwmon/hwmon*/reset_hotswap_or_wd +What: /sys/devices/platform/mlxplat/mlxreg-io/hwmon/hwmon*/reset_fw_reset +What: /sys/devices/platform/mlxplat/mlxreg-io/hwmon/hwmon*/reset_long_pb +What: /sys/devices/platform/mlxplat/mlxreg-io/hwmon/hwmon*/reset_main_pwr_fail +What: /sys/devices/platform/mlxplat/mlxreg-io/hwmon/hwmon*/reset_short_pb +What: /sys/devices/platform/mlxplat/mlxreg-io/hwmon/hwmon*/reset_sw_reset Date: June 2018 KernelVersion: 4.19 Contact: Vadim Pasternak <vadimpmellanox.com> @@ -76,3 +99,127 @@ reset cause. The files are read only. + +What: /sys/devices/platform/mlxplat/mlxreg-io/hwmon/hwmon*/reset_comex_pwr_fail +What: /sys/devices/platform/mlxplat/mlxreg-io/hwmon/hwmon*/reset_from_comex +What: /sys/devices/platform/mlxplat/mlxreg-io/hwmon/hwmon*/reset_system +What: /sys/devices/platform/mlxplat/mlxreg-io/hwmon/hwmon*/reset_voltmon_upgrade_fail +Date: November 2018 +KernelVersion: 5.0 +Contact: Vadim Pasternak <vadimpmellanox.com> +Description: These files show the system reset cause, as following: ComEx + power fail, reset from ComEx, system platform reset, reset + due to voltage monitor devices upgrade failure, + Value 1 in file means this is reset cause, 0 - otherwise. + Only one bit could be 1 at the same time, representing only + the last reset cause. + + The files are read only. + +What: /sys/devices/platform/mlxplat/mlxreg-io/hwmon/hwmon*/cpld4_version +Date: November 2018 +KernelVersion: 5.0 +Contact: Vadim Pasternak <vadimpmellanox.com> +Description: These files show with which CPLD versions have been burned + on LED board. + + The files are read only. + +What: /sys/devices/platform/mlxplat/mlxreg-io/hwmon/hwmon*/reset_comex_thermal +What: /sys/devices/platform/mlxplat/mlxreg-io/hwmon/hwmon*/reset_comex_wd +What: /sys/devices/platform/mlxplat/mlxreg-io/hwmon/hwmon*/reset_from_asic +What: /sys/devices/platform/mlxplat/mlxreg-io/hwmon/hwmon*/reset_reload_bios +What: /sys/devices/platform/mlxplat/mlxreg-io/hwmon/hwmon*/reset_sff_wd +What: /sys/devices/platform/mlxplat/mlxreg-io/hwmon/hwmon*/reset_swb_wd +Date: June 2019 +KernelVersion: 5.3 +Contact: Vadim Pasternak <vadimpmellanox.com> +Description: These files show the system reset cause, as following: + COMEX thermal shutdown; wathchdog power off or reset was derived + by one of the next components: COMEX, switch board or by Small Form + Factor mezzanine, reset requested from ASIC, reset cuased by BIOS + reload. Value 1 in file means this is reset cause, 0 - otherwise. + Only one of the above causes could be 1 at the same time, representing + only last reset cause. + + The files are read only. + +What: /sys/devices/platform/mlxplat/mlxreg-io/hwmon/hwmon*/config1 +What: /sys/devices/platform/mlxplat/mlxreg-io/hwmon/hwmon*/config2 +Date: January 2020 +KernelVersion: 5.6 +Contact: Vadim Pasternak <vadimpmellanox.com> +Description: These files show system static topology identification + like system's static I2C topology, number and type of FPGA + devices within the system and so on. + + The files are read only. + +What: /sys/devices/platform/mlxplat/mlxreg-io/hwmon/hwmon*/reset_ac_pwr_fail +What: /sys/devices/platform/mlxplat/mlxreg-io/hwmon/hwmon*/reset_platform +What: /sys/devices/platform/mlxplat/mlxreg-io/hwmon/hwmon*/reset_soc +What: /sys/devices/platform/mlxplat/mlxreg-io/hwmon/hwmon*/reset_sw_pwr_off +Date: January 2020 +KernelVersion: 5.6 +Contact: Vadim Pasternak <vadimpmellanox.com> +Description: These files show the system reset causes, as following: reset + due to AC power failure, reset invoked from software by + assertion reset signal through CPLD. reset caused by signal + asserted by SOC through ACPI register, reset invoked from + software by assertion power off signal through CPLD. + + The files are read only. + +What: /sys/devices/platform/mlxplat/mlxreg-io/hwmon/hwmon*/pcie_asic_reset_dis +Date: January 2020 +KernelVersion: 5.6 +Contact: Vadim Pasternak <vadimpmellanox.com> +Description: This file allows to retain ASIC up during PCIe root complex + reset, when attribute is set 1. + + The file is read/write. + +What: /sys/devices/platform/mlxplat/mlxreg-io/hwmon/hwmon*/vpd_wp +Date: January 2020 +KernelVersion: 5.6 +Contact: Vadim Pasternak <vadimpmellanox.com> +Description: This file allows to overwrite system VPD hardware wrtie + protection when attribute is set 1. + + The file is read/write. + +What: /sys/devices/platform/mlxplat/mlxreg-io/hwmon/hwmon*/voltreg_update_status +Date: January 2020 +KernelVersion: 5.6 +Contact: Vadim Pasternak <vadimpmellanox.com> +Description: This file exposes the configuration update status of burnable + voltage regulator devices. The status values are as following: + 0 - OK; 1 - CRC failure; 2 = I2C failure; 3 - in progress. + + The file is read only. + +What: /sys/devices/platform/mlxplat/mlxreg-io/hwmon/hwmon*/ufm_version +Date: January 2020 +KernelVersion: 5.6 +Contact: Vadim Pasternak <vadimpmellanox.com> +Description: This file exposes the firmware version of burnable voltage + regulator devices. + + The file is read only. + +What: /sys/devices/platform/mlxplat/mlxreg-io/hwmon/hwmon*/cpld1_pn +What: /sys/devices/platform/mlxplat/mlxreg-io/hwmon/hwmon*/cpld2_pn +What: /sys/devices/platform/mlxplat/mlxreg-io/hwmon/hwmon*/cpld3_pn +What: /sys/devices/platform/mlxplat/mlxreg-io/hwmon/hwmon*/cpld4_pn +What: /sys/devices/platform/mlxplat/mlxreg-io/hwmon/hwmon*/cpld1_version_min +What: /sys/devices/platform/mlxplat/mlxreg-io/hwmon/hwmon*/cpld2_version_min +What: /sys/devices/platform/mlxplat/mlxreg-io/hwmon/hwmon*/cpld3_version_min +What: /sys/devices/platform/mlxplat/mlxreg-io/hwmon/hwmon*/cpld4_version_min +Date: July 2020 +KernelVersion: 5.9 +Contact: Vadim Pasternak <vadimpmellanox.com> +Description: These files show with which CPLD part numbers and minor + versions have been burned CPLD devices equipped on a + system. + + The files are read only. -- Gitblit v1.6.2