fix(board): add noheadphonemic for mic pro

huangcm

2024-10-17 15e1b5207a76de34ee6bde806c6e629241aff10a

 longan/device/config/chips/a133/configs/c3/board.dts
..
..
@@ -6,7 +6,7 @@
6
6
 
7
7
 /dts-v1/;
8
8
 #include "sun50iw10p1.dtsi"
9
-
9
+#include "dt-bindings/input/linux-event-codes.h"
10
10
 
11
11
 /{
12
12
 	model = "sun50iw10";
..
..
@@ -190,9 +190,11 @@
190
190
 			};
191
191
 */
192
192
 			spi0_pins_a: spi0@0 {
193
-				allwinner,pins = "PC2", "PC4", "PC12", "PC15", "PC16";
194
-				allwinner,pname = "spi0_mosi", "spi0_miso",
195
-						  "spi0_sclk", "spi0_wp", "spi0_hold";
193
+				// allwinner,pins = "PC2", "PC4", "PC12", "PC15", "PC16";
194
+				allwinner,pins = "PC2", "PC4", "PC12";
195
+				// allwinner,pname = "spi0_mosi", "spi0_miso",
196
+				// 		  "spi0_sclk", "spi0_wp", "spi0_hold";
197
+				allwinner,pname = "spi0_mosi", "spi0_miso", "spi0_sclk";
196
198
 				allwinner,function = "spi0";
197
199
 				allwinner,muxsel = <4>;
198
200
 				allwinner,drive = <1>;
..
..
@@ -209,7 +211,8 @@
209
211
 			};
210
212
 
211
213
 			spi0_pins_c: spi0@2 {
212
-				allwinner,pins = "PC2", "PC3", "PC4", "PC7", "PC12", "PC15", "PC16";
214
+				// allwinner,pins = "PC2", "PC3", "PC4", "PC7", "PC12", "PC15", "PC16";
215
+				allwinner,pins = "PC2", "PC3", "PC4", "PC7", "PC12";
213
216
 				allwinner,function = "io_disabled";
214
217
 				allwinner,muxsel = <7>;
215
218
 				allwinner,drive = <1>;
..
..
@@ -298,7 +301,7 @@
298
301
                                 ctp_revert_x_flag = <0x1>;
299
302
                                 ctp_revert_y_flag = <0x1>;
300
303
                                 ctp_exchange_x_y_flag = <0x0>;
301
-                                ctp_int_port = <&pio PE 3 3 0xffffffff 0xffffffff 0>;
304
+                                ctp_int_port = <&pio PE 3 6 0xffffffff 0xffffffff 0>;
302
305
                                 ctp_wakeup =   <&pio PE 4 1 0xffffffff 0xffffffff 1>;
303
306
                                 ctp_power_ldo = <3300>;
304
307
                                 ctp_power_ldo_vol = <3300>;
..
..
@@ -320,29 +323,38 @@
320
323
                         pinctrl-1 = <&spi0_pins_c>;
321
324
                         spi0_cs_number = <1>;
322
325
                         spi0_cs_bitmap = <1>;
323
-			spi_slave_mode = <0>;
326
+						spi_slave_mode = <0>;
324
327
                         //status = "okay";
325
328
                         status = "disabled";
329
+						/*
326
330
                         spi_uart {
327
331
                                 compatible = "wkmic,wk2124spi";
328
332
                                 reg = <0>;
329
333
                                 spi-max-frequency = <10000000>;
330
334
                                 //irq_gpio = <&pio PH 11 6 0xffffffff 0xffffffff 0>;
331
335
                         };
336
+						*/
337
+
338
+						dh2228@2 {
339
+                        	compatible = "rohm,dh2228fv";
340
+                        	reg = <0>;
341
+                        	spi-max-frequency = <100000>;
342
+                		};
343
+
332
344
                 };
333
345
 /*
334
346
                 pwm3: pwm3@0300a000 {
335
347
                         pinctrl-names = "active", "sleep";
336
348
                         pinctrl-0 = <&pwm3_pin_a>;
337
349
                         pinctrl-1 = <&pwm3_pin_b>;
338
-			status = "disabled";
350
+						status = "disabled";
339
351
                 };
340
352
 */
341
353
                 pwm2: pwm2@0300a000 {
342
354
                         pinctrl-names = "active", "sleep";
343
355
                         pinctrl-0 = <&pwm2_pin_a>;
344
356
                         pinctrl-1 = <&pwm2_pin_b>;
345
-			status = "okay";
357
+						status = "okay";
346
358
                 };
347
359
 
348
360
 		twi1: twi@0x05002400{
..
..
@@ -376,7 +388,7 @@
376
388
 					interrupt-parent = <&pio>;
377
389
 					interrupts = <PB 8 IRQ_TYPE_LEVEL_LOW>;
378
390
 					status = "okay";
379
-					//wakeup-source;
391
+					wakeup-source;
380
392
 			};
381
393
 		};
382
394
 
..
..
@@ -528,6 +540,7 @@
528
540
 						regulator-ramp-delay = <250>;
529
541
 						regulator-enable-ramp-delay = <1000>;
530
542
 						regulator-boot-on;
543
+						regulator-always-on;
531
544
 					};
532
545
 					reg_dcdc2: dcdc2 {
533
546
 						regulator-name = "axp803-dcdc2";
..
..
@@ -988,6 +1001,7 @@
988
1001
 		};
989
1002
 
990
1003
 		sndcodec:sound@0 {
1004
+			noheadphonemic = <1>;
991
1005
 			status = "okay";
992
1006
 		};
993
1007
 
..
..
@@ -1000,7 +1014,7 @@
1000
1014
 		};
1001
1015
 
1002
1016
 		dmic:dmic-controller@0x05095000{
1003
-			status = "okay";
1017
+			status = "disabled";
1004
1018
 		};
1005
1019
 
1006
1020
 		snddmic:sound@2{
..
..
@@ -1220,11 +1234,12 @@
1220
1234
 */
1221
1235
 		keyboard {
1222
1236
 			compatible = "allwinner,keyboard_1350mv";
1223
-			status = "disable";
1224
-			key_cnt = <3>;
1225
-			key0 = <475 0x7372>;
1226
-			key1 = <646 0x73>;
1227
-			key2 = <900 0x72>;
1237
+			status = "okay";
1238
+			key_cnt = <1>;
1239
+			key0 = <590 KEY_RESERVED>;
1240
+			//key0 = <475 0x7372>;
1241
+			//key1 = <646 0x73>;
1242
+			//key2 = <897 0x72>;
1228
1243
 		};
1229
1244
 
1230
1245
                 wlan: wlan@0 {
..
..
@@ -1247,7 +1262,7 @@
1247
1262
 			clocks        = <&clk_losc_out>, <&clk_dcxo_out>;
1248
1263
                         bt_power      = "axp803-dldo1";
1249
1264
                         bt_io_regulator;
1250
-                        bt_rst_n      = <&r_pio PL 3 1 0xffffffff 0xffffffff 0>;
1265
+                        bt_rst_n      = <&r_pio PH 11 1 0xffffffff 0xffffffff 0>;
1251
1266
                         status        = "okay";
1252
1267
                 };
1253
1268
 
..
..
@@ -1336,21 +1351,64 @@
1336
1351
 	};
1337
1352
 	
1338
1353
 	leds {
1339
-               	compatible = "gpio-leds";
1340
-        	pinctrl-names = "default";
1341
-		status = "okay";
1354
+			compatible = "gpio-leds";
1355
+			pinctrl-names = "default";
1356
+			status = "okay";
1342
1357
 
1343
-               	sysled {
1344
-                       	label = "sysled";
1345
-                       	gpios = <&r_pio PL 10 1 0 1 1>;
1346
-			linux,default_trigger = "heartbeat";
1347
-               	};
1358
+			sysled {
1359
+				label = "sysled";
1360
+				gpios = <&r_pio PL 10 1 0 1 1>;
1361
+				linux,default_trigger = "heartbeat";
1362
+			};
1348
1363
 
1349
-               	spk_en {
1350
-                       	label = "spk_en";
1351
-                       	gpios = <&pio PB 7 1 0 1 0>;
1352
-			linux,default_trigger = "default-on";
1353
-               	};
1364
+            spk_en {
1365
+                label = "spk_en";
1366
+                gpios = <&pio PB 7 1 0 1 0>;
1367
+				linux,default_trigger = "default-on";
1368
+            };
1369
+
1370
+			fan_en {
1371
+				label = "fan_en";
1372
+				gpios = <&r_pio PL 7 1 0 1 0>;
1373
+				linux,default_trigger = "default-on";
1374
+			};
1375
+
1376
+			PH8 {
1377
+				label = "PH8";
1378
+				gpios = <&pio PH 8 1 0 1 0>;
1379
+				linux,default_trigger = "default-on";
1380
+			};
1381
+
1382
+			PC2 {
1383
+				label = "PC2";
1384
+				gpios = <&pio PC 2 1 0 1 0>;
1385
+				linux,default_trigger = "default-on";
1386
+			};
1387
+
1388
+			PC3 {
1389
+				label = "PC3";
1390
+				gpios = <&pio PC 3 1 0 1 0>;
1391
+				linux,default_trigger = "default-on";
1392
+			};
1393
+
1394
+			PC4 {
1395
+				label = "PC4";
1396
+				gpios = <&pio PC 4 1 0 1 0>;
1397
+				linux,default_trigger = "default-on";
1398
+			};
1399
+
1400
+			PC7 {
1401
+				label = "PC7";
1402
+				gpios = <&pio PC 7 1 0 1 0>;
1403
+				linux,default_trigger = "default-on";
1404
+			};
1405
+
1406
+			PC12 {
1407
+				label = "PC12";
1408
+				gpios = <&pio PC 12 1 0 1 0>;
1409
+				linux,default_trigger = "default-on";
1410
+			};
1411
+
1354
1412
         };
1355
1413
 };
1356
1414
 
..
..
@@ -1361,6 +1419,10 @@
1361
1419
 &s_cir0 {
1362
1420
 	status = "okay";
1363
1421
 
1422
+	pinctrl-names = "default", "sleep";
1423
+	pinctrl-0 = <&s_cir0_pins_a>;
1424
+	pinctrl-1 = <&s_cir0_pins_a>;
1425
+
1364
1426
 	s_cir0_used = <1>;
1365
1427
 	ir_power_key_code0 = <0x4d>;
1366
1428
 	ir_addr_code0 = <0x4040>;
..
..
@@ -1368,9 +1430,16 @@
1368
1430
 	ir_addr_code1 = <0x7f80>;
1369
1431
 	ir_power_key_code2 = <0x1c>;
1370
1432
 	ir_addr_code2 = <0xdf00>;
1371
-	//wakeup-source;
1433
+	wakeup-source;
1372
1434
 };
1373
1435
 
1436
+
1437
+&gmac0 {
1438
+	/delete-property/ phy-rst;
1439
+   	rx-delay = <7>;
1440
+};
1441
+
1442
+
1374
1443
 //#include "lcd-lvds-21-1920-1080.dtsi"
1375
1444
 #include "lcd-lvds-7-1024-600.dtsi"
1376
1445
 //#include "lcd-mipi-10-800-1280.dtsi"