rk3568 rt init

hc

2023-11-06 e3e12f52b214121840b44c91de5b3e5af5d3eb84

 kernel/arch/arm64/boot/dts/rockchip/NK-R36S0.dtsi
old mode 100755new mode 100644
..
..
@@ -8,21 +8,12 @@
8
8
 
9
9
 #include <dt-bindings/gpio/gpio.h>
10
10
 #include <dt-bindings/pinctrl/rockchip.h>
11
-#include <dt-bindings/display/media-bus-format.h>
12
11
 #include "rk3568.dtsi"
13
12
 #include "rk3568-evb.dtsi"
14
13
 
15
14
 / {
16
15
 	model = "Rockchip RK3568 EVB1 DDR4 V10 Board";
17
16
 	compatible = "rockchip,rk3568-evb1-ddr4-v10", "rockchip,rk3568";
18
-
19
-	rk_headset: rk-headset {
20
-		compatible = "rockchip_headset";
21
-		headset_gpio = <&gpio0 RK_PD5 GPIO_ACTIVE_LOW>;
22
-		spk_ctl_gpio = <&gpio4 RK_PC2 GPIO_ACTIVE_LOW>;//AMP_SD_GPIO4_C2_3V3
23
-		pinctrl-names = "default";
24
-		pinctrl-0 = <&hp_det>;
25
-	};
26
17
 
27
18
 	vcc2v5_sys: vcc2v5-ddr {
28
19
 		compatible = "regulator-fixed";
..
..
@@ -34,6 +25,15 @@
34
25
 		vin-supply = <&vcc3v3_sys>;
35
26
 	};
36
27
 
28
+	vcc3v3_vga: vcc3v3-vga {
29
+		compatible = "regulator-fixed";
30
+		regulator-name = "vcc3v3_vga";
31
+		regulator-always-on;
32
+		regulator-boot-on;
33
+		gpio = <&gpio0 RK_PD5 GPIO_ACTIVE_HIGH>;
34
+		enable-active-high;
35
+		vin-supply = <&vcc3v3_sys>;
36
+	};
37
37
 
38
38
 	pcie30_avdd0v9: pcie30-avdd0v9 {
39
39
 		compatible = "regulator-fixed";
..
..
@@ -60,9 +60,7 @@
60
60
 		regulator-name = "vcc3v3_pcie";
61
61
 		regulator-min-microvolt = <3300000>;
62
62
 		regulator-max-microvolt = <3300000>;
63
-		regulator-always-on;
64
63
 		enable-active-high;
65
-		regulator-boot-on;
66
64
 		gpio = <&gpio0 RK_PD4 GPIO_ACTIVE_HIGH>;
67
65
 		startup-delay-us = <5000>;
68
66
 		vin-supply = <&dc_12v>;
..
..
@@ -87,70 +85,107 @@
87
85
 		enable-active-high;
88
86
 		regulator-always-on;
89
87
 		regulator-boot-on;
90
-    	};
88
+	};
91
89
 #endif
92
90
 
93
-	    nk_io_init {
94
-                compatible = "nk_io_control";
95
-				vcc3_io_en_gpio = <&gpio0 RK_PC4 GPIO_ACTIVE_HIGH>; //VCC3_IO_EN_GPIO0_C4_3V3
96
-                hub_host2_5V_rest_gpio = <&gpio4 RK_PD2 GPIO_ACTIVE_HIGH>; //HUB_RST_GPIO4_D2_3V3
97
-                hub_host3_5v_gpio = <&gpio4 RK_PB2 GPIO_ACTIVE_HIGH>; //HOST3_EN_GPIO4_B2_1V8
98
-                vcc_5v_io = <&gpio1 RK_PA4 GPIO_ACTIVE_HIGH>;   //VCC5_IO_EN_GPIO1_A4_3V3
99
-                vcc_12v_io = <&gpio0 RK_PC7 GPIO_ACTIVE_HIGH>; //VCC12_IO_EN_GPIO0_C7_3V3
100
-                en_4g_gpio = <&gpio0 RK_PC6 GPIO_ACTIVE_HIGH>; //4G_PWREN_H_GPIO0_C6
101
-                reset_4g_gpio = <&gpio1 RK_PB2 GPIO_ACTIVE_HIGH>; //4G_RST_GPIO01_B2_3V3
102
-                air_mode_4g_gpio = <&gpio1 RK_PB0 GPIO_ACTIVE_HIGH>; //4G_AIR_MODE_GPIO01_B0_3V3
103
-                wake_4g_gpio = <&gpio1 RK_PB1 GPIO_ACTIVE_HIGH>; //4G_WAKEUP_GPIO01_B1_3V3
104
-				hp_en_gpio = <&gpio3 RK_PA6 GPIO_ACTIVE_HIGH>;//HP_EN_GPIO3_A6_3V3
105
-//              spk_out_gpio = <&gpio4 RK_PC2 GPIO_ACTIVE_HIGH>;//AMP_SD_GPIO4_C2_3V3			
106
-				wifi_power_en_gpio = <&gpio3 RK_PC6 GPIO_ACTIVE_HIGH>; //WIFI_PWREN_GPIO3_C6_1V8
107
-//				pcie_power_en_gpio = <&gpio0 RK_PD4 GPIO_ACTIVE_HIGH>;//PCIE_PWREN_H_GPIO0_D4				
108
-				pinctrl-names = "default";
109
-				pinctrl-0 = <&nk_io_gpio>;				
110
-        };
111
-		
112
-		panel: panel {
113
-				compatible = "simple-panel";
114
-				backlight = <&backlight>;
115
-				power-supply = <&vcc3v3_lcd0_n>;
116
-				enable-gpios = <&gpio2 RK_PD4 GPIO_ACTIVE_HIGH>; //LCD0_VDD_H_GPIO2_D4
117
-				reset-gpios = <&gpio3 RK_PD1 GPIO_ACTIVE_LOW>; //7511_RST_GPIO3_D1
118
-				edp-bl-gpios = <&gpio0 RK_PB7 GPIO_ACTIVE_HIGH>;  //LCD0_BKLT_EN_3V3
119
-				edp-bl-en = <&gpio0 RK_PB0 GPIO_ACTIVE_HIGH>; //LCD0_BKLT_EN_3V3
120
-				bus-format = <MEDIA_BUS_FMT_RGB888_1X24>;
121
-				bpc = <8>;
122
-				prepare-delay-ms = <200>;
123
-				enable-delay-ms = <20>;
124
-				lvds-gpio0 = <&gpio3 RK_PD2 GPIO_ACTIVE_HIGH>; //7511_GPIO0-GPIO3_D2 
125
-				lvds-gpio1 = <&gpio3 RK_PD3 GPIO_ACTIVE_HIGH>; //7511_GPIO1-GPIO3_D3 
126
-				lvds-gpio2 = <&gpio3 RK_PD4 GPIO_ACTIVE_HIGH>; //7511_GPIO2-GPIO3_D4 
127
-				lvds-gpio3 = <&gpio3 RK_PD5 GPIO_ACTIVE_HIGH>; //7511_GPIO3-GPIO3_D5
128
-				nodka-lvds = <15>;
129
-
130
-				display-timings {
131
-                native-mode = <&timing0>;
132
-                timing0: timing0 {
133
-					clock-frequency = <72500000>;
134
-					hactive = <1280>;
135
-					vactive = <800>;
136
-					hfront-porch = <70>;
137
-					hsync-len = <2>;
138
-					hback-porch = <88>;
139
-					vfront-porch = <7>;
140
-					vsync-len = <4>;
141
-					vback-porch = <17>;
142
-					hsync-active = <21>;
143
-					vsync-active = <0>;
144
-					de-active = <0>;
145
-					pixelclk-active = <0>;			
146
-					};
147
-				};
148
-				ports {
149
-					panel_in: endpoint {
150
-					remote-endpoint = <&edp_out>;
151
-						};
152
-					};   
153
-				};
91
+	ndj_io_init {
92
+         	compatible = "nk_io_control";	
93
+			pinctrl-names = "default";
94
+        	pinctrl-0 = <&nk_io_gpio>;
95
+			
96
+			//gpio_op0 = <&gpio1 RK_PD0 GPIO_ACTIVE_HIGH>;
97
+			
98
+			vcc_5v {
99
+				gpio_num = <&gpio1 RK_PA4 GPIO_ACTIVE_HIGH>; //VCC5_IO_EN_GPIO1_A4_3V3
100
+				gpio_function = <0>;	
101
+			};
102
+			
103
+			vcc_12v {
104
+				gpio_num = <&gpio0 RK_PC7 GPIO_ACTIVE_HIGH>;  //VCC12_IO_EN_GPIO0_C7_3V3
105
+				gpio_function = <0>;
106
+			};
107
+			
108
+			hub_host2_rst {
109
+				gpio_num = <&gpio4 RK_PD2 GPIO_ACTIVE_HIGH>;  //HUB_RST_GPIO4_D2_3V3
110
+				gpio_function = <3>;
111
+			};
112
+			
113
+			hub_host3 {
114
+				gpio_num = <&gpio4 RK_PB2 GPIO_ACTIVE_HIGH>; //HOST3_EN_GPIO4_B2_1V8
115
+				gpio_function = <0>;
116
+			};
117
+			
118
+			wake_4g {
119
+				gpio_num = <&gpio1 RK_PB1 GPIO_ACTIVE_LOW>; //4G_WAKEUP_GPIO01_B1_3V3
120
+				gpio_function = <0>;
121
+			};
122
+			
123
+			air_mode_4g {
124
+				gpio_num = <&gpio1 RK_PB0 GPIO_ACTIVE_LOW>; //4G_AIR_MODE_GPIO01_B0_3V3
125
+				gpio_function = <0>;
126
+			};
127
+			
128
+			reset_4g {
129
+				gpio_num = <&gpio1 RK_PB2 GPIO_ACTIVE_LOW>; //4G_RST_GPIO01_B2_3V3
130
+				gpio_function = <3>;
131
+			};
132
+			
133
+			en_4g {
134
+				gpio_num = <&gpio0 RK_PC6 GPIO_ACTIVE_HIGH>; //4G_PWREN_H_GPIO0_C6
135
+				gpio_function = <0>;
136
+			};
137
+			
138
+			hp_en {
139
+				gpio_num = <&gpio3 RK_PA6 GPIO_ACTIVE_HIGH>;//HP_EN_GPIO3_A6_3V3
140
+				gpio_function = <0>;
141
+			};
142
+			
143
+			wifi_power_en {
144
+				gpio_num = <&gpio3 RK_PC6 GPIO_ACTIVE_HIGH>; //WIFI_PWREN_GPIO3_C6_1V8
145
+				gpio_function = <0>;
146
+			};
147
+	#if 0		
148
+			do1 {
149
+				gpio_num = <&gpio1 RK_PD0 GPIO_ACTIVE_LOW>; 
150
+				gpio_function = <0>;
151
+			};
152
+			
153
+			do2 {
154
+				gpio_num = <&gpio1 RK_PD2 GPIO_ACTIVE_HIGH>;
155
+				gpio_function = <0>;
156
+			};
157
+			
158
+			do3 {
159
+				gpio_num = <&gpio1 RK_PD1 GPIO_ACTIVE_HIGH>;
160
+				gpio_function = <0>;
161
+			};
162
+			
163
+			do4 {
164
+				gpio_num = <&gpio1 RK_PD3 GPIO_ACTIVE_HIGH>;
165
+				gpio_function = <0>;
166
+			};
167
+			
168
+			do5 {
169
+				gpio_num = <&gpio2 RK_PD6 GPIO_ACTIVE_LOW>; 
170
+				gpio_function = <0>;
171
+			};
172
+			
173
+			do6 {
174
+				gpio_num = <&gpio2 RK_PD7 GPIO_ACTIVE_LOW>; 
175
+				gpio_function = <0>;
176
+			};
177
+			
178
+			do7 {
179
+				gpio_num = <&gpio3 RK_PA0 GPIO_ACTIVE_LOW>; 
180
+				gpio_function = <0>;
181
+			};
182
+			
183
+			di1 {
184
+				gpio_num = <&gpio2 RK_PD5 GPIO_ACTIVE_HIGH>;
185
+				gpio_function = <1>;
186
+			};
187
+	#endif
188
+};
154
189
 };
155
190
 
156
191
 &combphy0_us {
..
..
@@ -213,10 +248,6 @@
213
248
  * video_phy0 needs to be enabled
214
249
  * when dsi0 is enabled
215
250
  */
216
-&video_phy0 {
217
-	status = "disabled";
218
-};
219
-
220
251
 &dsi0 {
221
252
 	status = "disabled";
222
253
 };
..
..
@@ -237,10 +268,6 @@
237
268
  * video_phy1 needs to be enabled
238
269
  * when dsi1 is enabled
239
270
  */
240
- 
241
-&video_phy1 {
242
-	status = "okay";
243
-}; 
244
271
 &dsi1 {
245
272
 	status = "disabled";
246
273
 };
..
..
@@ -250,102 +277,29 @@
250
277
 };
251
278
 
252
279
 &dsi1_in_vp1 {
253
-	status = "okay";
280
+	status = "disabled";
254
281
 };
255
282
 
256
283
 &dsi1_panel {
257
-	power-supply = <&vcc3v3_lcd1_n>;   //MIPI_3V3EN_GPIO3_A3_d_3V3
258
-    vddio-mipi = <&gpio3 RK_PA4 GPIO_ACTIVE_HIGH>; //MIPI_EN_1V8_GPIO3_A4_d_3V3
259
-    reset-gpios = <&gpio3 RK_PC7 GPIO_ACTIVE_LOW>; //MIPI_RST_L_GPIO3_C7
260
-    vcc-5v-gpio = <&gpio1 RK_PA4 GPIO_ACTIVE_HIGH>; //VCC5_IO_EN_GPIO1_A4_3V3
261
-    pinctrl-names = "default";
262
-    pinctrl-0 = <&lcd1_rst_gpio>;
284
+	power-supply = <&vcc3v3_lcd1_n>;
263
285
 };
264
-
265
-&route_dsi1 {
266
-	status = "disabled";
267
-	connect = <&vp1_out_dsi1>;
268
-};
269
-
270
-
271
-/*
272
-*  edp_start
273
-*/
274
286
 
275
287
 &edp {
276
-    force-hpd;
277
-    status = "okay";
278
-    ports {
279
-        port@1 {
280
-            reg = <1>;
281
-            edp_out: endpoint {
282
-                remote-endpoint = <&panel_in>;
283
-            };
284
-        };
285
-    };
288
+	hpd-gpios = <&gpio0 RK_PC2 GPIO_ACTIVE_HIGH>;
289
+	status = "okay";
286
290
 };
287
291
 
288
292
 &edp_phy {
289
-  status = "okay";
290
-
293
+	status = "okay";
291
294
 };
292
295
 
293
296
 &edp_in_vp0 {
294
-    status = "disabled";
297
+	status = "okay";
295
298
 };
296
299
 
297
300
 &edp_in_vp1 {
298
-    status = "okay";
299
-
300
-};
301
-
302
-&route_edp {
303
-    status = "okay";
304
-    connect = <&vp1_out_edp>;
305
-};
306
-
307
-&route_edp {
308
-	status = "okay";
309
-};
310
-/*
311
-*  edp_end
312
-*/
313
-
314
-/*
315
-*  Hdmi_start
316
-*/
317
-
318
-&hdmi {
319
-	status = "okay";
320
-	rockchip,phy-table =
321
-		<92812500  0x8009 0x0000 0x0270>,
322
-		<165000000 0x800b 0x0000 0x026d>,
323
-		<185625000 0x800b 0x0000 0x01ed>,
324
-		<297000000 0x800b 0x0000 0x01ad>,
325
-		<594000000 0x8029 0x0000 0x0088>,
326
-		<000000000 0x0000 0x0000 0x0000>;
327
-};
328
-
329
-&route_hdmi {
330
-	status = "okay";
331
-	connect = <&vp0_out_hdmi>;
332
-};
333
-
334
-&hdmi_in_vp0 {
335
-	status = "okay";
336
-};
337
-
338
-&hdmi_in_vp1 {
339
301
 	status = "disabled";
340
302
 };
341
-
342
-&hdmi_sound {
343
-	status = "okay";
344
-};
345
-
346
-/*
347
- *  Hdmi_END
348
-*/
349
303
 
350
304
 &gmac0 {
351
305
 	phy-mode = "rgmii";
..
..
@@ -409,24 +363,8 @@
409
363
 	power-supply = <&vcc3v3_lcd0_n>;
410
364
 };
411
365
 
412
-&i2c3 {
413
-	status = "okay";
414
-       //mac eeprom
415
-        eeprom@51 {
416
-                //compatible = "atmel,24c02";
417
-                compatible = "atmel,24c256";
418
-                reg = <0x51>;
419
-        };
420
-	
421
-	  //nk-mcu
422
-        nkmcu@15 {
423
-                compatible = "nk_mcu";
424
-                reg = <0x15>;
425
-        };
426
-};
427
-
428
366
 &i2c4 {
429
-	status = "okay";
367
+	status = "disabled";
430
368
 	gc8034: gc8034@37 {
431
369
 		compatible = "galaxycore,gc8034";
432
370
 		status = "okay";
..
..
@@ -472,7 +410,7 @@
472
410
 		};
473
411
 	};
474
412
 	ov5695: ov5695@36 {
475
-		status = "okay";
413
+		status = "disabled";
476
414
 		compatible = "ovti,ov5695";
477
415
 		reg = <0x36>;
478
416
 		clocks = <&cru CLK_CIF_OUT>;
..
..
@@ -495,19 +433,6 @@
495
433
 	};
496
434
 };
497
435
 
498
-&i2c5 {
499
-	status = "okay";
500
-
501
-	hym8563: hym8563@51 {
502
-		compatible = "haoyu,hym8563";
503
-		reg = <0x51>;
504
-		#clock-cells = <0>;
505
-		clock-frequency = <32768>;
506
-		clock-output-names = "xin32k";
507
-		/* rtc_int is not connected */
508
-	};
509
-};
510
-
511
436
 &mdio0 {
512
437
 	rgmii_phy0: phy@0 {
513
438
 		compatible = "ethernet-phy-ieee802.3-c22";
..
..
@@ -522,51 +447,50 @@
522
447
 	};
523
448
 };
524
449
 
450
+&video_phy0 {
451
+	status = "disabled";
452
+};
525
453
 
454
+&video_phy1 {
455
+	status = "disabled";
456
+};
526
457
 
527
458
 &pcie30phy {
528
459
 	status = "okay";
529
460
 };
530
461
 
531
-&pcie2x1 {
532
-	reset-gpios = <&gpio3 RK_PC1 GPIO_ACTIVE_HIGH>;
462
+&pcie3x2 {
463
+	reset-gpios = <&gpio2 RK_PD6 GPIO_ACTIVE_HIGH>;
533
464
 	vpcie3v3-supply = <&vcc3v3_pcie>;
534
465
 	status = "okay";
535
466
 };
536
467
 
537
468
 &pinctrl {
538
-//	cam {
539
-//		camera_pwr: camera-pwr {
540
-//			rockchip,pins =
541
-//				/* camera power en */
542
-//				<0 RK_PC1 RK_FUNC_GPIO &pcfg_pull_none>;
543
-//		};
544
-//	};
469
+	cam {
470
+		camera_pwr: camera-pwr {
471
+			rockchip,pins =
472
+				/* camera power en */
473
+				<0 RK_PC1 RK_FUNC_GPIO &pcfg_pull_none>;
474
+		};
475
+	};
545
476
 	headphone {
546
477
 		hp_det: hp-det {
547
-			rockchip,pins = <0 RK_PD5 RK_FUNC_GPIO &pcfg_pull_down>,
548
-							<4 RK_PC2 RK_FUNC_GPIO &pcfg_pull_down>;
478
+			rockchip,pins = <3 RK_PC2 RK_FUNC_GPIO &pcfg_pull_down>;
549
479
 		};
550
480
 	};
551
481
 
552
482
 	wireless-wlan {
553
483
 		wifi_host_wake_irq: wifi-host-wake-irq {
554
-			rockchip,pins = <2 RK_PB2 RK_FUNC_GPIO &pcfg_pull_down>;
484
+			rockchip,pins = <3 RK_PD4 RK_FUNC_GPIO &pcfg_pull_down>;
555
485
 		};
556
486
 	};
557
487
 
558
488
 	wireless-bluetooth {
559
-		uart1_gpios: uart1-gpios {
560
-			rockchip,pins = <2 RK_PB5 RK_FUNC_GPIO &pcfg_pull_none>;
489
+		uart8_gpios: uart8-gpios {
490
+			rockchip,pins = <2 RK_PB1 RK_FUNC_GPIO &pcfg_pull_none>;
561
491
 		};
562
492
 	};
563
493
 	
564
-	lcd1 {
565
-        lcd1_rst_gpio: lcd1-rst-gpio {
566
-            rockchip,pins = <3 RK_PC7 RK_FUNC_GPIO &pcfg_pull_none>;
567
-        };
568
-    };
569
-		
570
494
 	nk_io_init{
571
495
 		nk_io_gpio: nk-io-gpio{
572
496
 			rockchip,pins = <0 RK_PB0 RK_FUNC_GPIO &pcfg_pull_none>,
..
..
@@ -576,7 +500,7 @@
576
500
 							<4 RK_PB2 RK_FUNC_GPIO &pcfg_pull_none>,
577
501
 							<1 RK_PA4 RK_FUNC_GPIO &pcfg_pull_none>,
578
502
 							<0 RK_PC7 RK_FUNC_GPIO &pcfg_pull_none>,
579
-							<1 RK_PB2 RK_FUNC_GPIO &pcfg_pull_none>,
503
+							<1 RK_PB2 RK_FUNC_GPIO &pcfg_pull_none>, 
580
504
 							<1 RK_PB0 RK_FUNC_GPIO &pcfg_pull_none>,
581
505
 							<1 RK_PB1 RK_FUNC_GPIO &pcfg_pull_none>,
582
506
 							<3 RK_PA6 RK_FUNC_GPIO &pcfg_pull_none>,
..
..
@@ -594,6 +518,10 @@
594
518
 	};
595
519
 };
596
520
 
521
+&rk809_sound {
522
+	hp-det-gpio = <&gpio3 RK_PC2 GPIO_ACTIVE_LOW>;
523
+};
524
+
597
525
 &rkisp {
598
526
 	status = "disabled";
599
527
 };
..
..
@@ -603,7 +531,7 @@
603
531
 };
604
532
 
605
533
 &rkisp_vir0 {
606
-	status = "disabled";
534
+	status = "okay";
607
535
 
608
536
 	port {
609
537
 		#address-cells = <1>;
..
..
@@ -616,32 +544,34 @@
616
544
 	};
617
545
 };
618
546
 
547
+&route_dsi0 {
548
+	status = "disabled";
549
+	connect = <&vp1_out_dsi0>;
550
+};
619
551
 
620
-
621
-
552
+&route_edp {
553
+	status = "okay";
554
+	connect = <&vp0_out_edp>;
555
+};
622
556
 
623
557
 &sata2 {
624
558
 	status = "okay";
625
559
 };
626
560
 
627
561
 &sdmmc2 {
628
-        status = "disabled";
629
-};
630
-
631
-&sdmmc1 {
632
-        max-frequency = <150000000>;
633
-        supports-sdio;
634
-        bus-width = <4>;
635
-        disable-wp;
636
-        cap-sd-highspeed;
637
-        cap-sdio-irq;
638
-        keep-power-in-suspend;
639
-        mmc-pwrseq = <&sdio_pwrseq>;
640
-        non-removable;
641
-        pinctrl-names = "default";
642
-        pinctrl-0 = <&sdmmc1_bus4 &sdmmc1_cmd &sdmmc1_clk>;
643
-        sd-uhs-sdr104;
644
-        status = "okay";
562
+	max-frequency = <150000000>;
563
+	supports-sdio;
564
+	bus-width = <4>;
565
+	disable-wp;
566
+	cap-sd-highspeed;
567
+	cap-sdio-irq;
568
+	keep-power-in-suspend;
569
+	mmc-pwrseq = <&sdio_pwrseq>;
570
+	non-removable;
571
+	pinctrl-names = "default";
572
+	pinctrl-0 = <&sdmmc2m0_bus4 &sdmmc2m0_cmd &sdmmc2m0_clk>;
573
+	sd-uhs-sdr104;
574
+	status = "okay";
645
575
 };
646
576
 
647
577
 &spdif_8ch {
..
..
@@ -651,25 +581,25 @@
651
581
 };
652
582
 
653
583
 &uart8 {
654
-	status = "disabled";
584
+	status = "okay";
655
585
 	pinctrl-names = "default";
656
586
 	pinctrl-0 = <&uart8m0_xfer &uart8m0_ctsn>;
657
587
 };
658
588
 
659
589
 &vcc3v3_lcd0_n {
660
-	gpio = <&gpio0 RK_PC4 GPIO_ACTIVE_HIGH>; 
590
+	gpio = <&gpio0 RK_PC7 GPIO_ACTIVE_HIGH>;
661
591
 	enable-active-high;
662
592
 };
663
593
 
664
594
 &vcc3v3_lcd1_n {
665
-	gpio = <&gpio3 RK_PA3 GPIO_ACTIVE_HIGH>; //MIPI_3V3EN_GPIO3_A3_d_3V3
595
+	gpio = <&gpio0 RK_PC5 GPIO_ACTIVE_HIGH>;
666
596
 	enable-active-high;
667
597
 };
668
598
 
669
599
 &wireless_wlan {
670
600
 	pinctrl-names = "default";
671
601
 	pinctrl-0 = <&wifi_host_wake_irq>;
672
-	WIFI,host_wake_irq = <&gpio2 RK_PB2 GPIO_ACTIVE_HIGH>;
602
+	WIFI,host_wake_irq = <&gpio3 RK_PD4 GPIO_ACTIVE_HIGH>;
673
603
 };
674
604
 
675
605
 &wireless_bluetooth {
..
..
@@ -677,47 +607,12 @@
677
607
 	clocks = <&rk809 1>;
678
608
 	clock-names = "ext_clock";
679
609
 	//wifi-bt-power-toggle;
680
-	uart_rts_gpios = <&gpio2 RK_PB5 GPIO_ACTIVE_LOW>;
610
+	uart_rts_gpios = <&gpio2 RK_PB1 GPIO_ACTIVE_LOW>;
681
611
 	pinctrl-names = "default", "rts_gpio";
682
-	pinctrl-0 = <&uart1m0_rtsn>;
683
-	pinctrl-1 = <&uart1_gpios>;
684
-	BT,reset_gpio    = <&gpio2 RK_PB7 GPIO_ACTIVE_HIGH>;
685
-    BT,wake_gpio     = <&gpio2 RK_PC0 GPIO_ACTIVE_HIGH>;
686
-    BT,wake_host_irq = <&gpio2 RK_PC1 GPIO_ACTIVE_HIGH>;
612
+	pinctrl-0 = <&uart8m0_rtsn>;
613
+	pinctrl-1 = <&uart8_gpios>;
614
+	BT,reset_gpio    = <&gpio3 RK_PA0 GPIO_ACTIVE_HIGH>;
615
+	BT,wake_gpio     = <&gpio3 RK_PA2 GPIO_ACTIVE_HIGH>;
616
+	BT,wake_host_irq = <&gpio3 RK_PA1 GPIO_ACTIVE_HIGH>;
687
617
 	status = "okay";
688
-};
689
-
690
-&uart0 {
691
-	status = "okay";
692
-};
693
-
694
-&uart1 {	
695
-	pinctrl-names = "default";	
696
-	pinctrl-0 = <&uart1m0_xfer &uart1m0_ctsn>;	
697
-	status = "okay";		
698
-};
699
-
700
-&uart3 {
701
-	status = "okay";
702
-	pinctrl-0 = <&uart3m1_xfer>;
703
-};
704
-
705
-&uart4 {
706
-	status = "okay";
707
-	pinctrl-0 = <&uart4m1_xfer>;
708
-};
709
-
710
-&uart5 {
711
-	status = "okay";
712
-	pinctrl-0 = <&uart5m1_xfer>;
713
-};
714
-
715
-&uart7 {
716
-	status = "okay";
717
-	pinctrl-0 = <&uart7m1_xfer>;
718
-};
719
-
720
-&uart9 {
721
-	status = "okay";
722
-	pinctrl-0 = <&uart9m1_xfer>;
723
618
 };