add wifi6 8852be driver

hc

2024-12-19 9370bb92b2d16684ee45cf24e879c93c509162da

 kernel/arch/arm/boot/dts/qcom-apq8060-dragonboard.dts
..
..
@@ -93,9 +93,8 @@
93
93
 		vdd-supply = <&pm8058_l14>; // 2.85V
94
94
 		aset-gpios = <&pm8058_gpio 35 GPIO_ACTIVE_LOW>;
95
95
 		capella,aset-resistance-ohms = <100000>;
96
-		/* GPIO34 has interrupt 225 on the PM8058 */
97
96
 		/* Trig on both edges - getting close or far away */
98
-		interrupts-extended = <&pm8058 225 IRQ_TYPE_EDGE_BOTH>;
97
+		interrupts-extended = <&pm8058_gpio 34 IRQ_TYPE_EDGE_BOTH>;
99
98
 		/* MPP05 analog input to the XOADC */
100
99
 		io-channels = <&xoadc 0x00 0x05>;
101
100
 		io-channel-names = "aout";
..
..
@@ -515,9 +514,8 @@
515
514
 				ak8975@c {
516
515
 					compatible = "asahi-kasei,ak8975";
517
516
 					reg = <0x0c>;
518
-					/* FIXME: GPIO33 has interrupt 224 on the PM8058 */
519
-					interrupt-parent = <&pm8058>;
520
-					interrupts = <224 IRQ_TYPE_EDGE_RISING>;
517
+					interrupt-parent = <&pm8058_gpio>;
518
+					interrupts = <33 IRQ_TYPE_EDGE_RISING>;
521
519
 					pinctrl-names = "default";
522
520
 					pinctrl-0 = <&dragon_ak8975_gpios>;
523
521
 					vid-supply = <&pm8058_lvs0>; // 1.8V
..
..
@@ -526,9 +524,8 @@
526
524
 				bmp085@77 {
527
525
 					compatible = "bosch,bmp085";
528
526
 					reg = <0x77>;
529
-					/* FIXME: GPIO16 has interrupt 207 on the PM8058 */
530
-					interrupt-parent = <&pm8058>;
531
-					interrupts = <207 IRQ_TYPE_EDGE_RISING>;
527
+					interrupt-parent = <&pm8058_gpio>;
528
+					interrupts = <16 IRQ_TYPE_EDGE_RISING>;
532
529
 					reset-gpios = <&tlmm 86 GPIO_ACTIVE_LOW>;
533
530
 					pinctrl-names = "default";
534
531
 					pinctrl-0 = <&dragon_bmp085_gpios>;
..
..
@@ -539,12 +536,11 @@
539
536
 					compatible = "invensense,mpu3050";
540
537
 					reg = <0x68>;
541
538
 					/*
542
-					 * GPIO17 has interrupt 208 on the
543
-					 * PM8058, it is pulled high by a 10k
539
+					 * GPIO17 is pulled high by a 10k
544
540
 					 * resistor to VLOGIC so needs to be
545
541
 					 * active low/falling edge.
546
542
 					 */
547
-					interrupts-extended = <&pm8058 208 IRQ_TYPE_EDGE_FALLING>;
543
+					interrupts-extended = <&pm8058_gpio 17 IRQ_TYPE_EDGE_FALLING>;
548
544
 					pinctrl-names = "default";
549
545
 					pinctrl-0 = <&dragon_mpu3050_gpios>;
550
546
 					vlogic-supply = <&pm8058_lvs0>; // 1.8V
..
..
@@ -589,11 +585,10 @@
589
585
 				compatible = "smsc,lan9221", "smsc,lan9115";
590
586
 				reg = <2 0x0 0x100>;
591
587
 				/*
592
-				 * GPIO7 has interrupt 198 on the PM8058
593
588
 				 * The second interrupt is the PME interrupt
594
589
 				 * for network wakeup, connected to the TLMM.
595
590
 				 */
596
-				interrupts-extended = <&pm8058 198 IRQ_TYPE_EDGE_FALLING>,
591
+				interrupts-extended = <&pm8058_gpio 7 IRQ_TYPE_EDGE_FALLING>,
597
592
 						    <&tlmm 29 IRQ_TYPE_EDGE_RISING>;
598
593
 				reset-gpios = <&tlmm 30 GPIO_ACTIVE_LOW>;
599
594
 				vdd33a-supply = <&dragon_veth>;