add wifi6 8852be driver

hc

2024-12-19 9370bb92b2d16684ee45cf24e879c93c509162da

 kernel/arch/arm/boot/dts/dra7-evm.dts
..
..
@@ -1,9 +1,6 @@
1
+// SPDX-License-Identifier: GPL-2.0-only
1
2
 /*
2
- * Copyright (C) 2013 Texas Instruments Incorporated - http://www.ti.com/
3
- *
4
- * This program is free software; you can redistribute it and/or modify
5
- * it under the terms of the GNU General Public License version 2 as
6
- * published by the Free Software Foundation.
3
+ * Copyright (C) 2013 Texas Instruments Incorporated - https://www.ti.com/
7
4
  */
8
5
 /dts-v1/;
9
6
 
..
..
@@ -38,6 +35,40 @@
38
35
 		regulator-max-microvolt = <1800000>;
39
36
 	};
40
37
 
38
+	reserved-memory {
39
+		#address-cells = <2>;
40
+		#size-cells = <2>;
41
+		ranges;
42
+
43
+		ipu2_memory_region: ipu2-memory@95800000 {
44
+			compatible = "shared-dma-pool";
45
+			reg = <0x0 0x95800000 0x0 0x3800000>;
46
+			reusable;
47
+			status = "okay";
48
+		};
49
+
50
+		dsp1_memory_region: dsp1-memory@99000000 {
51
+			compatible = "shared-dma-pool";
52
+			reg = <0x0 0x99000000 0x0 0x4000000>;
53
+			reusable;
54
+			status = "okay";
55
+		};
56
+
57
+		ipu1_memory_region: ipu1-memory@9d000000 {
58
+			compatible = "shared-dma-pool";
59
+			reg = <0x0 0x9d000000 0x0 0x2000000>;
60
+			reusable;
61
+			status = "okay";
62
+		};
63
+
64
+		dsp2_memory_region: dsp2-memory@9f000000 {
65
+			compatible = "shared-dma-pool";
66
+			reg = <0x0 0x9f000000 0x0 0x800000>;
67
+			reusable;
68
+			status = "okay";
69
+		};
70
+	};
71
+
41
72
 	evm_3v3_sd: fixedregulator-sd {
42
73
 		compatible = "regulator-fixed";
43
74
 		regulator-name = "evm_3v3_sd";
..
..
@@ -64,10 +95,10 @@
64
95
 		regulator-max-microvolt = <1800000>;
65
96
 	};
66
97
 
67
-	evm_3v3: fixedregulator-evm3v3 {
98
+	vsys_3v3: fixedregulator-vsys3v3 {
68
99
 		/* Output of Cntlr A of TPS43351-Q1 on dra7-evm */
69
100
 		compatible = "regulator-fixed";
70
-		regulator-name = "evm_3v3";
101
+		regulator-name = "vsys_3v3";
71
102
 		regulator-min-microvolt = <3300000>;
72
103
 		regulator-max-microvolt = <3300000>;
73
104
 		vin-supply = <&evm_12v0>;
..
..
@@ -501,32 +532,61 @@
501
532
 	phy-supply = <&ldousb_reg>;
502
533
 };
503
534
 
504
-&gpio7 {
535
+&gpio7_target {
505
536
 	ti,no-reset-on-init;
506
537
 	ti,no-idle-on-init;
507
538
 };
508
539
 
509
-&mac {
540
+&mac_sw {
510
541
 	status = "okay";
511
-	dual_emac;
512
542
 };
513
543
 
514
-&cpsw_emac0 {
515
-	phy_id = <&davinci_mdio>, <2>;
544
+&cpsw_port1 {
545
+	phy-handle = <&ethphy0>;
516
546
 	phy-mode = "rgmii";
517
-	dual_emac_res_vlan = <1>;
547
+	ti,dual-emac-pvid = <1>;
518
548
 };
519
549
 
520
-&cpsw_emac1 {
521
-	phy_id = <&davinci_mdio>, <3>;
550
+&cpsw_port2 {
551
+	phy-handle = <&ethphy1>;
522
552
 	phy-mode = "rgmii";
523
-	dual_emac_res_vlan = <2>;
553
+	ti,dual-emac-pvid = <2>;
554
+};
555
+
556
+&davinci_mdio_sw {
557
+	ethphy0: ethernet-phy@2 {
558
+		reg = <2>;
559
+	};
560
+
561
+	ethphy1: ethernet-phy@3 {
562
+		reg = <3>;
563
+	};
524
564
 };
525
565
 
526
566
 &dcan1 {
527
-	status = "ok";
567
+	status = "okay";
528
568
 	pinctrl-names = "default", "sleep", "active";
529
569
 	pinctrl-0 = <&dcan1_pins_sleep>;
530
570
 	pinctrl-1 = <&dcan1_pins_sleep>;
531
571
 	pinctrl-2 = <&dcan1_pins_default>;
532
572
 };
573
+
574
+&ipu2 {
575
+	status = "okay";
576
+	memory-region = <&ipu2_memory_region>;
577
+};
578
+
579
+&ipu1 {
580
+	status = "okay";
581
+	memory-region = <&ipu1_memory_region>;
582
+};
583
+
584
+&dsp1 {
585
+	status = "okay";
586
+	memory-region = <&dsp1_memory_region>;
587
+};
588
+
589
+&dsp2 {
590
+	status = "okay";
591
+	memory-region = <&dsp2_memory_region>;
592
+};