add wifi6 8852be driver

hc

2024-12-19 9370bb92b2d16684ee45cf24e879c93c509162da

 kernel/Documentation/ABI/testing/sysfs-class-net-phydev
..
..
@@ -11,26 +11,43 @@
11
11
 KernelVersion:	3.15
12
12
 Contact:	netdev@vger.kernel.org
13
13
 Description:
14
-		Boolean value indicating whether the PHY device has
15
-		any fixups registered against it (phy_register_fixup)
14
+		This attribute contains the boolean value whether a given PHY
15
+		device has had any "fixup" workaround running on it, encoded as
16
+		a boolean. This information is provided to help troubleshooting
17
+		PHY configurations.
16
18
 
17
19
 What:		/sys/class/mdio_bus/<bus>/<device>/phy_id
18
20
 Date:		November 2012
19
21
 KernelVersion:	3.8
20
22
 Contact:	netdev@vger.kernel.org
21
23
 Description:
22
-		32-bit hexadecimal value corresponding to the PHY device's OUI,
23
-		model and revision number.
24
+		This attribute contains the 32-bit PHY Identifier as reported
25
+		by the device during bus enumeration, encoded in hexadecimal.
26
+		This ID is used to match the device with the appropriate
27
+		driver.
24
28
 
25
29
 What:		/sys/class/mdio_bus/<bus>/<device>/phy_interface
26
30
 Date:		February 2014
27
31
 KernelVersion:	3.15
28
32
 Contact:	netdev@vger.kernel.org
29
33
 Description:
30
-		String value indicating the PHY interface, possible
31
-		values are:.
34
+		This attribute contains the PHY interface as configured by the
35
+		Ethernet driver during bus enumeration, encoded in string.
36
+		This interface mode is used to configure the Ethernet MAC with the
37
+		appropriate mode for its data lines to the PHY hardware.
38
+
39
+		Possible values are:
40
+
32
41
 		<empty> (not available), mii, gmii, sgmii, tbi, rev-mii,
33
42
 		rmii, rgmii, rgmii-id, rgmii-rxid, rgmii-txid, rtbi, smii
34
43
 		xgmii, moca, qsgmii, trgmii, 1000base-x, 2500base-x, rxaui,
35
44
 		xaui, 10gbase-kr, unknown
36
45
 
46
+What:		/sys/class/mdio_bus/<bus>/<device>/phy_standalone
47
+Date:		May 2019
48
+KernelVersion:	5.3
49
+Contact:	netdev@vger.kernel.org
50
+Description:
51
+		Boolean value indicating whether the PHY device is used in
52
+		standalone mode, without a net_device associated, by PHYLINK.
53
+		Attribute created only when this is the case.