add wifi6 8852be driver

hc

2024-12-19 9370bb92b2d16684ee45cf24e879c93c509162da

 kernel/Documentation/ABI/stable/sysfs-driver-mlxreg-io
..
..
@@ -1,6 +1,4 @@
1
-What:		/sys/devices/platform/mlxplat/mlxreg-io/hwmon/hwmon*/
2
-							asic_health
3
-
1
+What:		/sys/devices/platform/mlxplat/mlxreg-io/hwmon/hwmon*/asic_health
4
2
 Date:		June 2018
5
3
 KernelVersion:	4.19
6
4
 Contact:	Vadim Pasternak <vadimpmellanox.com>
..
..
@@ -9,10 +7,8 @@
9
7
 
10
8
 		The files are read only.
11
9
 
12
-What:		/sys/devices/platform/mlxplat/mlxreg-io/hwmon/hwmon*/
13
-							cpld1_version
14
-							cpld2_version
15
-
10
+What:		/sys/devices/platform/mlxplat/mlxreg-io/hwmon/hwmon*/cpld1_version
11
+What:		/sys/devices/platform/mlxplat/mlxreg-io/hwmon/hwmon*/cpld2_version
16
12
 Date:		June 2018
17
13
 KernelVersion:	4.19
18
14
 Contact:	Vadim Pasternak <vadimpmellanox.com>
..
..
@@ -20,6 +16,34 @@
20
16
 		on carrier and switch boards.
21
17
 
22
18
 		The files are read only.
19
+
20
+What:		/sys/devices/platform/mlxplat/mlxreg-io/hwmon/hwmon*/fan_dir
21
+Date:		December 2018
22
+KernelVersion:	5.0
23
+Contact:	Vadim Pasternak <vadimpmellanox.com>
24
+Description:	This file shows the system fans direction:
25
+		forward direction - relevant bit is set 0;
26
+		reversed direction - relevant bit is set 1.
27
+
28
+		The files are read only.
29
+
30
+What:		/sys/devices/platform/mlxplat/mlxreg-io/hwmon/hwmon*/cpld3_version
31
+Date:		November 2018
32
+KernelVersion:	5.0
33
+Contact:	Vadim Pasternak <vadimpmellanox.com>
34
+Description:	These files show with which CPLD versions have been burned
35
+		on LED or Gearbox board.
36
+
37
+		The files are read only.
38
+
39
+What:		/sys/devices/platform/mlxplat/mlxreg-io/hwmon/hwmon*/jtag_enable
40
+Date:		November 2018
41
+KernelVersion:	5.0
42
+Contact:	Vadim Pasternak <vadimpmellanox.com>
43
+Description:	These files enable and disable the access to the JTAG domain.
44
+		By default access to the JTAG domain is disabled.
45
+
46
+		The file is read/write.
23
47
 
24
48
 What:		/sys/devices/platform/mlxplat/mlxreg-io/hwmon/hwmon*/select_iio
25
49
 Date:		June 2018
..
..
@@ -54,16 +78,15 @@
54
78
 
55
79
 		The files are write only.
56
80
 
57
-What:		/sys/devices/platform/mlxplat/mlxreg-io/hwmon/hwmon*/
58
-							reset_aux_pwr_or_ref
59
-							reset_asic_thermal
60
-							reset_hotswap_or_halt
61
-							reset_hotswap_or_wd
62
-							reset_fw_reset
63
-							reset_long_pb
64
-							reset_main_pwr_fail
65
-							reset_short_pb
66
-							reset_sw_reset
81
+What:		/sys/devices/platform/mlxplat/mlxreg-io/hwmon/hwmon*/reset_aux_pwr_or_ref
82
+What:		/sys/devices/platform/mlxplat/mlxreg-io/hwmon/hwmon*/reset_asic_thermal
83
+What:		/sys/devices/platform/mlxplat/mlxreg-io/hwmon/hwmon*/reset_hotswap_or_halt
84
+What:		/sys/devices/platform/mlxplat/mlxreg-io/hwmon/hwmon*/reset_hotswap_or_wd
85
+What:		/sys/devices/platform/mlxplat/mlxreg-io/hwmon/hwmon*/reset_fw_reset
86
+What:		/sys/devices/platform/mlxplat/mlxreg-io/hwmon/hwmon*/reset_long_pb
87
+What:		/sys/devices/platform/mlxplat/mlxreg-io/hwmon/hwmon*/reset_main_pwr_fail
88
+What:		/sys/devices/platform/mlxplat/mlxreg-io/hwmon/hwmon*/reset_short_pb
89
+What:		/sys/devices/platform/mlxplat/mlxreg-io/hwmon/hwmon*/reset_sw_reset
67
90
 Date:		June 2018
68
91
 KernelVersion:	4.19
69
92
 Contact:	Vadim Pasternak <vadimpmellanox.com>
..
..
@@ -76,3 +99,127 @@
76
99
 		reset cause.
77
100
 
78
101
 		The files are read only.
102
+
103
+What:		/sys/devices/platform/mlxplat/mlxreg-io/hwmon/hwmon*/reset_comex_pwr_fail
104
+What:		/sys/devices/platform/mlxplat/mlxreg-io/hwmon/hwmon*/reset_from_comex
105
+What:		/sys/devices/platform/mlxplat/mlxreg-io/hwmon/hwmon*/reset_system
106
+What:		/sys/devices/platform/mlxplat/mlxreg-io/hwmon/hwmon*/reset_voltmon_upgrade_fail
107
+Date:		November 2018
108
+KernelVersion:	5.0
109
+Contact:	Vadim Pasternak <vadimpmellanox.com>
110
+Description:	These files show the system reset cause, as following: ComEx
111
+		power fail, reset from ComEx, system platform reset, reset
112
+		due to voltage monitor devices upgrade failure,
113
+		Value 1 in file means this is reset cause, 0 - otherwise.
114
+		Only one bit could be 1 at the same time, representing only
115
+		the last reset cause.
116
+
117
+		The files are read only.
118
+
119
+What:		/sys/devices/platform/mlxplat/mlxreg-io/hwmon/hwmon*/cpld4_version
120
+Date:		November 2018
121
+KernelVersion:	5.0
122
+Contact:	Vadim Pasternak <vadimpmellanox.com>
123
+Description:	These files show with which CPLD versions have been burned
124
+		on LED board.
125
+
126
+		The files are read only.
127
+
128
+What:		/sys/devices/platform/mlxplat/mlxreg-io/hwmon/hwmon*/reset_comex_thermal
129
+What:		/sys/devices/platform/mlxplat/mlxreg-io/hwmon/hwmon*/reset_comex_wd
130
+What:		/sys/devices/platform/mlxplat/mlxreg-io/hwmon/hwmon*/reset_from_asic
131
+What:		/sys/devices/platform/mlxplat/mlxreg-io/hwmon/hwmon*/reset_reload_bios
132
+What:		/sys/devices/platform/mlxplat/mlxreg-io/hwmon/hwmon*/reset_sff_wd
133
+What:		/sys/devices/platform/mlxplat/mlxreg-io/hwmon/hwmon*/reset_swb_wd
134
+Date:		June 2019
135
+KernelVersion:	5.3
136
+Contact:	Vadim Pasternak <vadimpmellanox.com>
137
+Description:	These files show the system reset cause, as following:
138
+		COMEX thermal shutdown; wathchdog power off or reset was derived
139
+		by one of the next components: COMEX, switch board or by Small Form
140
+		Factor mezzanine, reset requested from ASIC, reset cuased by BIOS
141
+		reload. Value 1 in file means this is reset cause, 0 - otherwise.
142
+		Only one of the above causes could be 1 at the same time, representing
143
+		only last reset cause.
144
+
145
+		The files are read only.
146
+
147
+What:		/sys/devices/platform/mlxplat/mlxreg-io/hwmon/hwmon*/config1
148
+What:		/sys/devices/platform/mlxplat/mlxreg-io/hwmon/hwmon*/config2
149
+Date:		January 2020
150
+KernelVersion:	5.6
151
+Contact:	Vadim Pasternak <vadimpmellanox.com>
152
+Description:	These files show system static topology identification
153
+		like system's static I2C topology, number and type of FPGA
154
+		devices within the system and so on.
155
+
156
+		The files are read only.
157
+
158
+What:		/sys/devices/platform/mlxplat/mlxreg-io/hwmon/hwmon*/reset_ac_pwr_fail
159
+What:		/sys/devices/platform/mlxplat/mlxreg-io/hwmon/hwmon*/reset_platform
160
+What:		/sys/devices/platform/mlxplat/mlxreg-io/hwmon/hwmon*/reset_soc
161
+What:		/sys/devices/platform/mlxplat/mlxreg-io/hwmon/hwmon*/reset_sw_pwr_off
162
+Date:		January 2020
163
+KernelVersion:	5.6
164
+Contact:	Vadim Pasternak <vadimpmellanox.com>
165
+Description:	These files show the system reset causes, as following: reset
166
+		due to AC power failure, reset invoked from software by
167
+		assertion reset signal through CPLD. reset caused by signal
168
+		asserted by SOC through ACPI register, reset invoked from
169
+		software by assertion power off signal through CPLD.
170
+
171
+		The files are read only.
172
+
173
+What:		/sys/devices/platform/mlxplat/mlxreg-io/hwmon/hwmon*/pcie_asic_reset_dis
174
+Date:		January 2020
175
+KernelVersion:	5.6
176
+Contact:	Vadim Pasternak <vadimpmellanox.com>
177
+Description:	This file allows to retain ASIC up during PCIe root complex
178
+		reset, when attribute is set 1.
179
+
180
+		The file is read/write.
181
+
182
+What:		/sys/devices/platform/mlxplat/mlxreg-io/hwmon/hwmon*/vpd_wp
183
+Date:		January 2020
184
+KernelVersion:	5.6
185
+Contact:	Vadim Pasternak <vadimpmellanox.com>
186
+Description:	This file allows to overwrite system VPD hardware wrtie
187
+		protection when attribute is set 1.
188
+
189
+		The file is read/write.
190
+
191
+What:		/sys/devices/platform/mlxplat/mlxreg-io/hwmon/hwmon*/voltreg_update_status
192
+Date:		January 2020
193
+KernelVersion:	5.6
194
+Contact:	Vadim Pasternak <vadimpmellanox.com>
195
+Description:	This file exposes the configuration update status of burnable
196
+		voltage regulator devices. The status values are as following:
197
+		0 - OK; 1 - CRC failure; 2 = I2C failure; 3 - in progress.
198
+
199
+		The file is read only.
200
+
201
+What:		/sys/devices/platform/mlxplat/mlxreg-io/hwmon/hwmon*/ufm_version
202
+Date:		January 2020
203
+KernelVersion:	5.6
204
+Contact:	Vadim Pasternak <vadimpmellanox.com>
205
+Description:	This file exposes the firmware version of burnable voltage
206
+		regulator devices.
207
+
208
+		The file is read only.
209
+
210
+What:		/sys/devices/platform/mlxplat/mlxreg-io/hwmon/hwmon*/cpld1_pn
211
+What:		/sys/devices/platform/mlxplat/mlxreg-io/hwmon/hwmon*/cpld2_pn
212
+What:		/sys/devices/platform/mlxplat/mlxreg-io/hwmon/hwmon*/cpld3_pn
213
+What:		/sys/devices/platform/mlxplat/mlxreg-io/hwmon/hwmon*/cpld4_pn
214
+What:		/sys/devices/platform/mlxplat/mlxreg-io/hwmon/hwmon*/cpld1_version_min
215
+What:		/sys/devices/platform/mlxplat/mlxreg-io/hwmon/hwmon*/cpld2_version_min
216
+What:		/sys/devices/platform/mlxplat/mlxreg-io/hwmon/hwmon*/cpld3_version_min
217
+What:		/sys/devices/platform/mlxplat/mlxreg-io/hwmon/hwmon*/cpld4_version_min
218
+Date:		July 2020
219
+KernelVersion:	5.9
220
+Contact:	Vadim Pasternak <vadimpmellanox.com>
221
+Description:	These files show with which CPLD part numbers and minor
222
+		versions have been burned CPLD devices equipped on a
223
+		system.
224
+
225
+		The files are read only.