add lvds1024*800

hc

2024-01-31 f70575805708cabdedea7498aaa3f710fde4d920

 kernel/arch/arm64/boot/dts/rockchip/NK-R36S0.dtsi
..
..
@@ -16,6 +16,14 @@
16
16
 	model = "Rockchip RK3568 EVB1 DDR4 V10 Board";
17
17
 	compatible = "rockchip,rk3568-evb1-ddr4-v10", "rockchip,rk3568";
18
18
 
19
+	rk_headset: rk-headset {
20
+		compatible = "rockchip_headset";
21
+		headset_gpio = <&gpio0 RK_PD5 GPIO_ACTIVE_LOW>;
22
+		spk_ctl_gpio = <&gpio4 RK_PC2 GPIO_ACTIVE_LOW>;//AMP_SD_GPIO4_C2_3V3
23
+		pinctrl-names = "default";
24
+		pinctrl-0 = <&hp_det>;
25
+	};
26
+
19
27
 	vcc2v5_sys: vcc2v5-ddr {
20
28
 		compatible = "regulator-fixed";
21
29
 		regulator-name = "vcc2v5-sys";
..
..
@@ -26,15 +34,6 @@
26
34
 		vin-supply = <&vcc3v3_sys>;
27
35
 	};
28
36
 
29
-	vcc3v3_vga: vcc3v3-vga {
30
-		compatible = "regulator-fixed";
31
-		regulator-name = "vcc3v3_vga";
32
-		regulator-always-on;
33
-		regulator-boot-on;
34
-		gpio = <&gpio0 RK_PD5 GPIO_ACTIVE_HIGH>;
35
-		enable-active-high;
36
-		vin-supply = <&vcc3v3_sys>;
37
-	};
38
37
 
39
38
 	pcie30_avdd0v9: pcie30-avdd0v9 {
40
39
 		compatible = "regulator-fixed";
..
..
@@ -61,7 +60,9 @@
61
60
 		regulator-name = "vcc3v3_pcie";
62
61
 		regulator-min-microvolt = <3300000>;
63
62
 		regulator-max-microvolt = <3300000>;
63
+		regulator-always-on;
64
64
 		enable-active-high;
65
+		regulator-boot-on;
65
66
 		gpio = <&gpio0 RK_PD4 GPIO_ACTIVE_HIGH>;
66
67
 		startup-delay-us = <5000>;
67
68
 		vin-supply = <&dc_12v>;
..
..
@@ -86,9 +87,8 @@
86
87
 		enable-active-high;
87
88
 		regulator-always-on;
88
89
 		regulator-boot-on;
89
-	};
90
+    	};
90
91
 #endif
91
-
92
92
 	ndj_io_init {
93
93
          	compatible = "nk_io_control";	
94
94
 			pinctrl-names = "default";
..
..
@@ -137,7 +137,7 @@
137
137
 			};
138
138
 			
139
139
 			hp_en {
140
-				gpio_num = <&gpio3 RK_PA6 GPIO_ACTIVE_HIGH>;//HP_EN_GPIO3_A6_3V3
140
+				gpio_num = <&gpio3 RK_PA6 GPIO_ACTIVE_LOW>;//HP_EN_GPIO3_A6_3V3
141
141
 				gpio_function = <0>;
142
142
 			};
143
143
 			
..
..
@@ -186,9 +186,28 @@
186
186
 				gpio_function = <1>;
187
187
 			};
188
188
 	#endif
189
-	};
190
-	
191
-			panel: panel {
189
+		};
190
+#if 0			
191
+	    nk_io_init {
192
+                compatible = "nk_io_control";
193
+//				vcc3_io_en_gpio = <&gpio0 RK_PC4 GPIO_ACTIVE_HIGH>; //VCC3_IO_EN_GPIO0_C4_3V3
194
+                hub_host2_5V_rest_gpio = <&gpio4 RK_PD2 GPIO_ACTIVE_HIGH>; //HUB_RST_GPIO4_D2_3V3
195
+                hub_host3_5v_gpio = <&gpio4 RK_PB2 GPIO_ACTIVE_HIGH>; //HOST3_EN_GPIO4_B2_1V8
196
+                vcc_5v_io = <&gpio1 RK_PA4 GPIO_ACTIVE_HIGH>;   //VCC5_IO_EN_GPIO1_A4_3V3
197
+                vcc_12v_io = <&gpio0 RK_PC7 GPIO_ACTIVE_HIGH>; //VCC12_IO_EN_GPIO0_C7_3V3
198
+                en_4g_gpio = <&gpio0 RK_PC6 GPIO_ACTIVE_HIGH>; //4G_PWREN_H_GPIO0_C6
199
+                reset_4g_gpio = <&gpio1 RK_PB2 GPIO_ACTIVE_HIGH>; //4G_RST_GPIO01_B2_3V3
200
+                air_mode_4g_gpio = <&gpio1 RK_PB0 GPIO_ACTIVE_HIGH>; //4G_AIR_MODE_GPIO01_B0_3V3
201
+                wake_4g_gpio = <&gpio1 RK_PB1 GPIO_ACTIVE_HIGH>; //4G_WAKEUP_GPIO01_B1_3V3
202
+				hp_en_gpio = <&gpio3 RK_PA6 GPIO_ACTIVE_HIGH>;//HP_EN_GPIO3_A6_3V3
203
+//              spk_out_gpio = <&gpio4 RK_PC2 GPIO_ACTIVE_HIGH>;//AMP_SD_GPIO4_C2_3V3			
204
+				wifi_power_en_gpio = <&gpio3 RK_PC6 GPIO_ACTIVE_HIGH>; //WIFI_PWREN_GPIO3_C6_1V8
205
+//				pcie_power_en_gpio = <&gpio0 RK_PD4 GPIO_ACTIVE_HIGH>;//PCIE_PWREN_H_GPIO0_D4				
206
+				pinctrl-names = "default";
207
+				pinctrl-0 = <&nk_io_gpio>;				
208
+        };
209
+#endif	
210
+		panel: panel {
192
211
 				compatible = "simple-panel";
193
212
 				backlight = <&backlight>;
194
213
 				power-supply = <&vcc3v3_lcd0_n>;
..
..
@@ -207,8 +226,8 @@
207
226
 				nodka-lvds = <15>;
208
227
 
209
228
 				display-timings {
210
-                native-mode = <&timing0>;
211
-                timing0: timing0 {
229
+                native-mode = <&timing>;
230
+                timing: timing {
212
231
 					clock-frequency = <72500000>;
213
232
 					hactive = <1280>;
214
233
 					vactive = <800>;
..
..
@@ -225,8 +244,8 @@
225
244
 					};
226
245
 				};
227
246
 				ports {
228
-					panel_in: endpoint {
229
-					remote-endpoint = <&edp_out>;
247
+					panel_in_lvds: endpoint {
248
+					remote-endpoint = <&lvds_out>;
230
249
 						};
231
250
 					};   
232
251
 				};
..
..
@@ -292,6 +311,10 @@
292
311
  * video_phy0 needs to be enabled
293
312
  * when dsi0 is enabled
294
313
  */
314
+&video_phy0 {
315
+	status = "okay";
316
+};
317
+
295
318
 &dsi0 {
296
319
 	status = "disabled";
297
320
 };
..
..
@@ -312,6 +335,10 @@
312
335
  * video_phy1 needs to be enabled
313
336
  * when dsi1 is enabled
314
337
  */
338
+ 
339
+&video_phy1 {
340
+	status = "disabled";
341
+}; 
315
342
 &dsi1 {
316
343
 	status = "disabled";
317
344
 };
..
..
@@ -325,41 +352,117 @@
325
352
 };
326
353
 
327
354
 &dsi1_panel {
328
-	power-supply = <&vcc3v3_lcd1_n>;
355
+//	power-supply = <&vcc3v3_lcd1_n>;   //MIPI_3V3EN_GPIO3_A3_d_3V3
356
+    vddio-mipi = <&gpio3 RK_PA4 GPIO_ACTIVE_HIGH>; //MIPI_EN_1V8_GPIO3_A4_d_3V3
357
+    reset-gpios = <&gpio3 RK_PC7 GPIO_ACTIVE_LOW>; //MIPI_RST_L_GPIO3_C7
358
+    vcc-5v-gpio = <&gpio1 RK_PA4 GPIO_ACTIVE_HIGH>; //VCC5_IO_EN_GPIO1_A4_3V3
359
+    pinctrl-names = "default";
360
+    pinctrl-0 = <&lcd1_rst_gpio>;
329
361
 };
362
+
363
+&route_dsi1 {
364
+	status = "disabled";
365
+	connect = <&vp1_out_dsi1>;
366
+};
367
+
368
+
369
+/*
370
+*  edp_start
371
+*/
330
372
 
331
373
 &edp {
332
-	//hpd-gpios = <&gpio0 RK_PC2 GPIO_ACTIVE_HIGH>;	
333
374
     force-hpd;
334
-    status = "okay";
335
-    ports {
336
-        port@1 {
337
-            reg = <1>;
338
-            edp_out: endpoint {
339
-                remote-endpoint = <&panel_in>;
340
-            };
341
-        };
342
-   
343
-	};
344
-};
345
-
346
-&edp_phy {
347
-	status = "okay";
348
-};
349
-
350
-&edp_in_vp0 {
351
375
 	status = "disabled";
352
376
 };
353
377
 
378
+&edp_phy {
379
+	status = "disabled";
380
+};
381
+
382
+&edp_in_vp0 {
383
+    status = "disabled";
384
+};
385
+
354
386
 &edp_in_vp1 {
387
+    status = "disabled";
388
+
389
+};
390
+
391
+&route_edp {
392
+    status = "disabled";
393
+    connect = <&vp1_out_edp>;
394
+};
395
+
396
+&route_edp {
397
+	status = "disabled";
398
+};
399
+
400
+&lvds {
401
+	status = "okay";
402
+	ports {
403
+		port@1 {
404
+			reg = <1>;
405
+			lvds_out:endpoint {
406
+				remote-endpoint = <&panel_in_lvds>;
407
+			};
408
+		};
409
+	};
410
+};
411
+
412
+&route_lvds{
413
+	status = "okay";
414
+	connect = <&vp1_out_lvds>;
415
+};
416
+
417
+&lvds_in_vp1 {
355
418
 	status = "okay";
356
419
 };
420
+
421
+/*
422
+*  edp_end
423
+*/
424
+
425
+/*
426
+*  Hdmi_start
427
+*/
428
+
429
+&hdmi {
430
+	status = "okay";
431
+	rockchip,phy-table =
432
+		<92812500  0x8009 0x0000 0x0270>,
433
+		<165000000 0x800b 0x0000 0x026d>,
434
+		<185625000 0x800b 0x0000 0x01ed>,
435
+		<297000000 0x800b 0x0000 0x01ad>,
436
+		<594000000 0x8029 0x0000 0x0088>,
437
+		<000000000 0x0000 0x0000 0x0000>;
438
+};
439
+
440
+&route_hdmi {
441
+	status = "okay";
442
+	connect = <&vp0_out_hdmi>;
443
+};
444
+
445
+&hdmi_in_vp0 {
446
+	status = "okay";
447
+};
448
+
449
+&hdmi_in_vp1 {
450
+	status = "disabled";
451
+};
452
+
453
+&hdmi_sound {
454
+	status = "okay";
455
+};
456
+
457
+/*
458
+ *  Hdmi_END
459
+*/
357
460
 
358
461
 &gmac0 {
359
462
 	phy-mode = "rgmii";
360
463
 	clock_in_out = "output";
361
464
 
362
-	snps,reset-gpio = <&gpio2 RK_PD3 GPIO_ACTIVE_LOW>;
465
+	snps,reset-gpio = <&gpio2 RK_PC6 GPIO_ACTIVE_LOW>;
363
466
 	snps,reset-active-low;
364
467
 	/* Reset time is 20ms, 100ms for rtl8211f */
365
468
 	snps,reset-delays-us = <0 20000 100000>;
..
..
@@ -379,7 +482,9 @@
379
482
 	rx_delay = <0x2f>;
380
483
 
381
484
 	phy-handle = <&rgmii_phy0>;
485
+	
382
486
 	status = "disabled";
487
+	
383
488
 };
384
489
 
385
490
 &gmac1 {
..
..
@@ -444,7 +549,6 @@
444
549
 		reset-gpios = <&gpio3 RK_PB6 GPIO_ACTIVE_LOW>;
445
550
 		pwdn-gpios = <&gpio4 RK_PB4 GPIO_ACTIVE_LOW>;
446
551
 		rockchip,grf = <&grf>;
447
-		power-domains = <&power RK3568_PD_VI>;
448
552
 		rockchip,camera-module-index = <0>;
449
553
 		rockchip,camera-module-facing = "back";
450
554
 		rockchip,camera-module-name = "RK-CMK-8M-2-v1";
..
..
@@ -501,6 +605,19 @@
501
605
 	};
502
606
 };
503
607
 
608
+&i2c5 {
609
+	status = "okay";
610
+
611
+	hym8563: hym8563@51 {
612
+		compatible = "haoyu,hym8563";
613
+		reg = <0x51>;
614
+		#clock-cells = <0>;
615
+		clock-frequency = <32768>;
616
+		clock-output-names = "xin32k";
617
+		/* rtc_int is not connected */
618
+	};
619
+};
620
+
504
621
 &mdio0 {
505
622
 	rgmii_phy0: phy@0 {
506
623
 		compatible = "ethernet-phy-ieee802.3-c22";
..
..
@@ -515,44 +632,51 @@
515
632
 	};
516
633
 };
517
634
 
518
-&video_phy0 {
519
-	status = "disabled";
520
-};
521
635
 
522
-&video_phy1 {
523
-	status = "disabled";
524
-};
525
636
 
526
637
 &pcie30phy {
527
638
 	status = "okay";
528
639
 };
529
640
 
530
-&pcie3x2 {
531
-	reset-gpios = <&gpio2 RK_PD6 GPIO_ACTIVE_HIGH>;
641
+&pcie2x1 {
642
+	reset-gpios = <&gpio3 RK_PC1 GPIO_ACTIVE_HIGH>;
532
643
 	vpcie3v3-supply = <&vcc3v3_pcie>;
533
644
 	status = "okay";
534
645
 };
535
646
 
536
647
 &pinctrl {
537
-
648
+//	cam {
649
+//		camera_pwr: camera-pwr {
650
+//			rockchip,pins =
651
+//				/* camera power en */
652
+//				<0 RK_PC1 RK_FUNC_GPIO &pcfg_pull_none>;
653
+//		};
654
+//	};
538
655
 	headphone {
539
656
 		hp_det: hp-det {
540
-			rockchip,pins = <3 RK_PC2 RK_FUNC_GPIO &pcfg_pull_down>;
657
+			rockchip,pins = <0 RK_PD5 RK_FUNC_GPIO &pcfg_pull_down>,
658
+							<4 RK_PC2 RK_FUNC_GPIO &pcfg_pull_down>;
541
659
 		};
542
660
 	};
543
661
 
544
662
 	wireless-wlan {
545
663
 		wifi_host_wake_irq: wifi-host-wake-irq {
546
-			rockchip,pins = <3 RK_PD4 RK_FUNC_GPIO &pcfg_pull_down>;
664
+			rockchip,pins = <2 RK_PB2 RK_FUNC_GPIO &pcfg_pull_down>;
547
665
 		};
548
666
 	};
549
667
 
550
668
 	wireless-bluetooth {
551
-		uart8_gpios: uart8-gpios {
552
-			rockchip,pins = <2 RK_PB1 RK_FUNC_GPIO &pcfg_pull_none>;
669
+		uart1_gpios: uart1-gpios {
670
+			rockchip,pins = <2 RK_PB5 RK_FUNC_GPIO &pcfg_pull_none>;
553
671
 		};
554
672
 	};
555
673
 	
674
+	lcd1 {
675
+        lcd1_rst_gpio: lcd1-rst-gpio {
676
+            rockchip,pins = <3 RK_PC7 RK_FUNC_GPIO &pcfg_pull_none>;
677
+        };
678
+    };
679
+		
556
680
 	nk_io_init{
557
681
 		nk_io_gpio: nk-io-gpio{
558
682
 			rockchip,pins = <0 RK_PB0 RK_FUNC_GPIO &pcfg_pull_none>,
..
..
@@ -562,7 +686,7 @@
562
686
 							<4 RK_PB2 RK_FUNC_GPIO &pcfg_pull_none>,
563
687
 							<1 RK_PA4 RK_FUNC_GPIO &pcfg_pull_none>,
564
688
 							<0 RK_PC7 RK_FUNC_GPIO &pcfg_pull_none>,
565
-							<1 RK_PB2 RK_FUNC_GPIO &pcfg_pull_none>, 
689
+							<1 RK_PB2 RK_FUNC_GPIO &pcfg_pull_none>,
566
690
 							<1 RK_PB0 RK_FUNC_GPIO &pcfg_pull_none>,
567
691
 							<1 RK_PB1 RK_FUNC_GPIO &pcfg_pull_none>,
568
692
 							<3 RK_PA6 RK_FUNC_GPIO &pcfg_pull_none>,
..
..
@@ -578,10 +702,6 @@
578
702
 							<0 RK_PC6 RK_FUNC_GPIO &pcfg_pull_none>;
579
703
 		};
580
704
 	};
581
-};
582
-
583
-&rk809_sound {
584
-	hp-det-gpio = <&gpio3 RK_PC2 GPIO_ACTIVE_LOW>;
585
705
 };
586
706
 
587
707
 &rkisp {
..
..
@@ -606,36 +726,30 @@
606
726
 	};
607
727
 };
608
728
 
609
-&route_dsi0 {
610
-	status = "disabled";
611
-	connect = <&vp1_out_dsi0>;
612
-};
613
729
 
614
-
615
-
616
-&route_edp {
617
-	status = "okay";
618
-	connect = <&vp1_out_edp>;
619
-};
620
730
 
621
731
 &sata2 {
622
732
 	status = "okay";
623
733
 };
624
734
 
625
735
 &sdmmc2 {
626
-	max-frequency = <150000000>;
627
-	supports-sdio;
628
-	bus-width = <4>;
629
-	disable-wp;
630
-	cap-sd-highspeed;
631
-	cap-sdio-irq;
632
-	keep-power-in-suspend;
633
-	mmc-pwrseq = <&sdio_pwrseq>;
634
-	non-removable;
635
-	pinctrl-names = "default";
636
-	pinctrl-0 = <&sdmmc2m0_bus4 &sdmmc2m0_cmd &sdmmc2m0_clk>;
637
-	sd-uhs-sdr104;
638
-	status = "okay";
736
+        status = "disabled";
737
+};
738
+
739
+&sdmmc1 {
740
+        max-frequency = <150000000>;
741
+        supports-sdio;
742
+        bus-width = <4>;
743
+        disable-wp;
744
+        cap-sd-highspeed;
745
+        cap-sdio-irq;
746
+        keep-power-in-suspend;
747
+        mmc-pwrseq = <&sdio_pwrseq>;
748
+        non-removable;
749
+        pinctrl-names = "default";
750
+        pinctrl-0 = <&sdmmc1_bus4 &sdmmc1_cmd &sdmmc1_clk>;
751
+        sd-uhs-sdr104;
752
+        status = "okay";
639
753
 };
640
754
 
641
755
 &spdif_8ch {
..
..
@@ -663,7 +777,7 @@
663
777
 &wireless_wlan {
664
778
 	pinctrl-names = "default";
665
779
 	pinctrl-0 = <&wifi_host_wake_irq>;
666
-	WIFI,host_wake_irq = <&gpio3 RK_PD4 GPIO_ACTIVE_HIGH>;
780
+	WIFI,host_wake_irq = <&gpio2 RK_PB2 GPIO_ACTIVE_HIGH>;
667
781
 };
668
782
 
669
783
 &wireless_bluetooth {
..
..
@@ -671,13 +785,13 @@
671
785
 	clocks = <&rk809 1>;
672
786
 	clock-names = "ext_clock";
673
787
 	//wifi-bt-power-toggle;
674
-	uart_rts_gpios = <&gpio2 RK_PB1 GPIO_ACTIVE_LOW>;
788
+	uart_rts_gpios = <&gpio2 RK_PB5 GPIO_ACTIVE_LOW>;
675
789
 	pinctrl-names = "default", "rts_gpio";
676
-	pinctrl-0 = <&uart8m0_rtsn>;
677
-	pinctrl-1 = <&uart8_gpios>;
678
-	BT,reset_gpio    = <&gpio3 RK_PA0 GPIO_ACTIVE_HIGH>;
679
-	BT,wake_gpio     = <&gpio3 RK_PA2 GPIO_ACTIVE_HIGH>;
680
-	BT,wake_host_irq = <&gpio3 RK_PA1 GPIO_ACTIVE_HIGH>;
790
+	pinctrl-0 = <&uart1m0_rtsn>;
791
+	pinctrl-1 = <&uart1_gpios>;
792
+	BT,reset_gpio    = <&gpio2 RK_PB7 GPIO_ACTIVE_HIGH>;
793
+    BT,wake_gpio     = <&gpio2 RK_PC0 GPIO_ACTIVE_HIGH>;
794
+    BT,wake_host_irq = <&gpio2 RK_PC1 GPIO_ACTIVE_HIGH>;
681
795
 	status = "okay";
682
796
 };
683
797
 
..
..
@@ -714,4 +828,4 @@
714
828
 &uart9 {
715
829
 	status = "okay";
716
830
 	pinctrl-0 = <&uart9m1_xfer>;
717
-};
831
+};