add boot partition size

hc

2023-12-11 d2ccde1c8e90d38cee87a1b0309ad2827f3fd30d

 kernel/arch/arm/boot/dts/tegra20-tamonten.dtsi
..
..
@@ -183,8 +183,8 @@
183
183
 			};
184
184
 			conf_ata {
185
185
 				nvidia,pins = "ata", "atb", "atc", "atd", "ate",
186
-					"cdev1", "cdev2", "dap1", "dtb", "gma",
187
-					"gmb", "gmc", "gmd", "gme", "gpu7",
186
+					"cdev1", "cdev2", "dap1", "dtb", "dtf",
187
+					"gma", "gmb", "gmc", "gmd", "gme", "gpu7",
188
188
 					"gpv", "i2cp", "irrx", "irtx", "pta",
189
189
 					"rm", "slxa", "slxk", "spia", "spib",
190
190
 					"uac";
..
..
@@ -203,7 +203,7 @@
203
203
 			};
204
204
 			conf_crtp {
205
205
 				nvidia,pins = "crtp", "dap2", "dap3", "dap4",
206
-					"dtc", "dte", "dtf", "gpu", "sdio1",
206
+					"dtc", "dte", "gpu", "sdio1",
207
207
 					"slxc", "slxd", "spdi", "spdo", "spig",
208
208
 					"uda";
209
209
 				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
..
..
@@ -495,40 +495,25 @@
495
495
 		status = "okay";
496
496
 	};
497
497
 
498
-	sdhci@c8000600 {
498
+	mmc@c8000600 {
499
499
 		cd-gpios = <&gpio TEGRA_GPIO(H, 2) GPIO_ACTIVE_LOW>;
500
500
 		wp-gpios = <&gpio TEGRA_GPIO(H, 3) GPIO_ACTIVE_HIGH>;
501
501
 		bus-width = <4>;
502
502
 		status = "okay";
503
503
 	};
504
504
 
505
-	clocks {
506
-		compatible = "simple-bus";
507
-		#address-cells = <1>;
508
-		#size-cells = <0>;
509
-
510
-		clk32k_in: clock@0 {
511
-			compatible = "fixed-clock";
512
-			reg = <0>;
513
-			#clock-cells = <0>;
514
-			clock-frequency = <32768>;
515
-		};
505
+	clk32k_in: clock@0 {
506
+		compatible = "fixed-clock";
507
+		clock-frequency = <32768>;
508
+		#clock-cells = <0>;
516
509
 	};
517
510
 
518
-	regulators {
519
-		compatible = "simple-bus";
520
-
521
-		#address-cells = <1>;
522
-		#size-cells = <0>;
523
-
524
-		pci_vdd_reg: regulator@1 {
525
-			compatible = "regulator-fixed";
526
-			reg = <1>;
527
-			regulator-name = "vdd_1v05";
528
-			regulator-min-microvolt = <1050000>;
529
-			regulator-max-microvolt = <1050000>;
530
-			gpio = <&pmic 2 0>;
531
-			enable-active-high;
532
-		};
511
+	pci_vdd_reg: regulator@1 {
512
+		compatible = "regulator-fixed";
513
+		regulator-name = "vdd_1v05";
514
+		regulator-min-microvolt = <1050000>;
515
+		regulator-max-microvolt = <1050000>;
516
+		gpio = <&pmic 2 0>;
517
+		enable-active-high;
533
518
 	};
534
519
 };