forked from ~ljy/RK356X_SDK_RELEASE

blame | history | patch | commit | commitdiff
hc
2023-12-11 d2ccde1c8e90d38cee87a1b0309ad2827f3fd30d 
 kernel/arch/arm/boot/dts/omap4-droid4-xt894.dts
....@@ -1,775 +1,9 @@
1
-/*
2
- * This program is free software; you can redistribute it and/or modify
3
- * it under the terms of the GNU General Public License version 2 as
4
- * published by the Free Software Foundation.
5
- */
1
+// SPDX-License-Identifier: GPL-2.0-only
62 /dts-v1/;
73 
8
-#include <dt-bindings/input/input.h>
9
-#include "omap443x.dtsi"
10
-#include "motorola-cpcap-mapphone.dtsi"
4
+#include "motorola-mapphone-common.dtsi"
115 
126 / {
137 	model = "Motorola Droid 4 XT894";
148 	compatible = "motorola,droid4", "ti,omap4430", "ti,omap4";
15
-
16
-	chosen {
17
-		stdout-path = &uart3;
18
-	};
19
-
20
-	aliases {
21
-		display0 = &lcd0;
22
-		display1 = &hdmi0;
23
-	};
24
-
25
-	/*
26
-	 * We seem to have only 1021 MB accessible, 1021 - 1022 is locked,
27
-	 * then 1023 - 1024 seems to contain mbm.
28
-	 */
29
-	memory {
30
-		device_type = "memory";
31
-		reg = <0x80000000 0x3fd00000>;	/* 1021 MB */
32
-	};
33
-
34
-	/* Poweroff GPIO probably connected to CPCAP */
35
-	gpio-poweroff {
36
-		compatible = "gpio-poweroff";
37
-		pinctrl-0 = <&poweroff_gpio>;
38
-		pinctrl-names = "default";
39
-		gpios = <&gpio2 18 GPIO_ACTIVE_LOW>;	/* gpio50 */
40
-	};
41
-
42
-	hdmi0: connector {
43
-		compatible = "hdmi-connector";
44
-		pinctrl-0 = <&hdmi_hpd_gpio>;
45
-		pinctrl-names = "default";
46
-		label = "hdmi";
47
-		type = "d";
48
-
49
-		hpd-gpios = <&gpio2 31 GPIO_ACTIVE_HIGH>;	/* gpio63 */
50
-
51
-		port {
52
-			hdmi_connector_in: endpoint {
53
-				remote-endpoint = <&hdmi_out>;
54
-			};
55
-		};
56
-	};
57
-
58
-	/*
59
-	 * HDMI 5V regulator probably sourced from battery. Let's keep
60
-	 * keep this as always enabled for HDMI to work until we've
61
-	 * figured what the encoder chip is.
62
-	 */
63
-	hdmi_regulator: regulator-hdmi {
64
-		compatible = "regulator-fixed";
65
-		regulator-name = "hdmi";
66
-		regulator-min-microvolt = <5000000>;
67
-		regulator-max-microvolt = <5000000>;
68
-		gpio = <&gpio2 27 GPIO_ACTIVE_HIGH>;	/* gpio59 */
69
-		enable-active-high;
70
-		regulator-always-on;
71
-	};
72
-
73
-	/* FS USB Host PHY on port 1 for mdm6600 */
74
-	fsusb1_phy: usb-phy@1 {
75
-		compatible = "motorola,mapphone-mdm6600";
76
-		pinctrl-0 = <&usb_mdm6600_pins>;
77
-		pinctrl-names = "default";
78
-		enable-gpios = <&gpio3 31 GPIO_ACTIVE_LOW>;     /* gpio_95 */
79
-		power-gpios = <&gpio2 22 GPIO_ACTIVE_HIGH>;	/* gpio_54 */
80
-		reset-gpios = <&gpio2 17 GPIO_ACTIVE_HIGH>;	/* gpio_49 */
81
-		/* mode: gpio_148 gpio_149 */
82
-		motorola,mode-gpios = <&gpio5 20 GPIO_ACTIVE_HIGH>,
83
-				      <&gpio5 21 GPIO_ACTIVE_HIGH>;
84
-		/* cmd: gpio_103 gpio_104 gpio_142 */
85
-		motorola,cmd-gpios = <&gpio4 7 GPIO_ACTIVE_HIGH>,
86
-				     <&gpio4 8 GPIO_ACTIVE_HIGH>,
87
-				     <&gpio5 14 GPIO_ACTIVE_HIGH>;
88
-		/* status: gpio_52 gpio_53 gpio_55 */
89
-		motorola,status-gpios = <&gpio2 20 GPIO_ACTIVE_HIGH>,
90
-					<&gpio2 21 GPIO_ACTIVE_HIGH>,
91
-					<&gpio2 23 GPIO_ACTIVE_HIGH>;
92
-		#phy-cells = <0>;
93
-	};
94
-
95
-	/* HS USB host TLL nop-phy on port 2 for w3glte */
96
-	hsusb2_phy: usb-phy@2 {
97
-		compatible = "usb-nop-xceiv";
98
-		#phy-cells = <0>;
99
-	};
100
-
101
-	/* LCD regulator from sw5 source */
102
-	lcd_regulator: regulator-lcd {
103
-		compatible = "regulator-fixed";
104
-		regulator-name = "lcd";
105
-		regulator-min-microvolt = <5050000>;
106
-		regulator-max-microvolt = <5050000>;
107
-		gpio = <&gpio4 0 GPIO_ACTIVE_HIGH>;	/* gpio96 */
108
-		enable-active-high;
109
-		vin-supply = <&sw5>;
110
-	};
111
-
112
-	/* This is probably coming straight from the battery.. */
113
-	wl12xx_vmmc: regulator-wl12xx {
114
-		compatible = "regulator-fixed";
115
-		regulator-name = "vwl1271";
116
-		regulator-min-microvolt = <1650000>;
117
-		regulator-max-microvolt = <1650000>;
118
-		gpio = <&gpio3 30 GPIO_ACTIVE_HIGH>;	/* gpio94 */
119
-		startup-delay-us = <70000>;
120
-		enable-active-high;
121
-	};
122
-
123
-	gpio_keys {
124
-		compatible = "gpio-keys";
125
-
126
-		volume_down {
127
-			label = "Volume Down";
128
-			gpios = <&gpio5 26 GPIO_ACTIVE_LOW>; /* gpio154 */
129
-			linux,code = <KEY_VOLUMEDOWN>;
130
-			linux,can-disable;
131
-			/* Value above 7.95ms for no GPIO hardware debounce */
132
-			debounce-interval = <10>;
133
-		};
134
-
135
-		slider {
136
-			label = "Keypad Slide";
137
-			gpios = <&gpio4 26 GPIO_ACTIVE_HIGH>; /* gpio122 */
138
-			linux,input-type = <EV_SW>;
139
-			linux,code = <SW_KEYPAD_SLIDE>;
140
-			linux,can-disable;
141
-			/* Value above 7.95ms for no GPIO hardware debounce */
142
-			debounce-interval = <10>;
143
-		};
144
-	};
145
-
146
-	soundcard {
147
-		compatible = "audio-graph-card";
148
-		label = "Droid 4 Audio";
149
-
150
-		simple-graph-card,widgets =
151
-			"Speaker", "Earpiece",
152
-			"Speaker", "Loudspeaker",
153
-			"Headphone", "Headphone Jack",
154
-			"Microphone", "Internal Mic";
155
-
156
-		simple-graph-card,routing =
157
-			"Earpiece", "EP",
158
-			"Loudspeaker", "SPKR",
159
-			"Headphone Jack", "HSL",
160
-			"Headphone Jack", "HSR",
161
-			"MICR", "Internal Mic";
162
-
163
-		dais = <&mcbsp2_port>, <&mcbsp3_port>;
164
-	};
165
-
166
-	pwm8: dmtimer-pwm-8 {
167
-		pinctrl-names = "default";
168
-		pinctrl-0 = <&vibrator_direction_pin>;
169
-
170
-		compatible = "ti,omap-dmtimer-pwm";
171
-		#pwm-cells = <3>;
172
-		ti,timers = <&timer8>;
173
-		ti,clock-source = <0x01>;
174
-	};
175
-
176
-	pwm9: dmtimer-pwm-9 {
177
-		pinctrl-names = "default";
178
-		pinctrl-0 = <&vibrator_enable_pin>;
179
-
180
-		compatible = "ti,omap-dmtimer-pwm";
181
-		#pwm-cells = <3>;
182
-		ti,timers = <&timer9>;
183
-		ti,clock-source = <0x01>;
184
-	};
185
-
186
-	vibrator {
187
-		compatible = "pwm-vibrator";
188
-		pwms = <&pwm9 0 10000000 0>, <&pwm8 0 10000000 0>;
189
-		pwm-names = "enable", "direction";
190
-		direction-duty-cycle-ns = <10000000>;
191
-	};
192
-};
193
-
194
-&dss {
195
-	status = "okay";
196
-};
197
-
198
-&dsi1 {
199
-	status = "okay";
200
-	vdd-supply = <&vcsi>;
201
-
202
-	port {
203
-		dsi1_out_ep: endpoint {
204
-			remote-endpoint = <&lcd0_in>;
205
-			lanes = <0 1 2 3 4 5>;
206
-		};
207
-	};
208
-
209
-	lcd0: display {
210
-		compatible = "panel-dsi-cm";
211
-		label = "lcd0";
212
-		vddi-supply = <&lcd_regulator>;
213
-		reset-gpios = <&gpio4 5 GPIO_ACTIVE_HIGH>;	/* gpio101 */
214
-
215
-		width-mm = <50>;
216
-		height-mm = <89>;
217
-		backlight = <&lcd_backlight>;
218
-
219
-		panel-timing {
220
-			clock-frequency = <0>;		/* Calculated by dsi */
221
-
222
-			hback-porch = <2>;
223
-			hactive = <540>;
224
-			hfront-porch = <0>;
225
-			hsync-len = <2>;
226
-
227
-			vback-porch = <1>;
228
-			vactive = <960>;
229
-			vfront-porch = <0>;
230
-			vsync-len = <1>;
231
-
232
-			hsync-active = <0>;
233
-			vsync-active = <0>;
234
-			de-active = <1>;
235
-			pixelclk-active = <1>;
236
-		};
237
-
238
-		port {
239
-			lcd0_in: endpoint {
240
-				remote-endpoint = <&dsi1_out_ep>;
241
-			};
242
-		};
243
-	};
244
-};
245
-
246
-&hdmi {
247
-	status = "okay";
248
-	pinctrl-0 = <&dss_hdmi_pins>;
249
-	pinctrl-names = "default";
250
-	vdda-supply = <&vdac>;
251
-
252
-	port {
253
-		hdmi_out: endpoint {
254
-			remote-endpoint = <&hdmi_connector_in>;
255
-			lanes = <1 0 3 2 5 4 7 6>;
256
-		};
257
-	};
258
-};
259
-
260
-&i2c1 {
261
-	tmp105@48 {
262
-		compatible = "ti,tmp105";
263
-		reg = <0x48>;
264
-		pinctrl-0 = <&tmp105_irq>;
265
-		pinctrl-names = "default";
266
-		/* kpd_row0.gpio_178 */
267
-		interrupts-extended = <&gpio6 18 IRQ_TYPE_EDGE_FALLING
268
-				       &omap4_pmx_core 0x14e>;
269
-		interrupt-names = "irq", "wakeup";
270
-		wakeup-source;
271
-	};
272
-};
273
-
274
-&keypad {
275
-	keypad,num-rows = <8>;
276
-	keypad,num-columns = <8>;
277
-	linux,keymap = <
278
-
279
-	/* Row 1 */
280
-	MATRIX_KEY(0, 2, KEY_1)
281
-	MATRIX_KEY(0, 6, KEY_2)
282
-	MATRIX_KEY(2, 3, KEY_3)
283
-	MATRIX_KEY(0, 7, KEY_4)
284
-	MATRIX_KEY(0, 4, KEY_5)
285
-	MATRIX_KEY(5, 5, KEY_6)
286
-	MATRIX_KEY(0, 1, KEY_7)
287
-	MATRIX_KEY(0, 5, KEY_8)
288
-	MATRIX_KEY(0, 0, KEY_9)
289
-	MATRIX_KEY(1, 6, KEY_0)
290
-
291
-	/* Row 2 */
292
-	MATRIX_KEY(3, 4, KEY_APOSTROPHE)
293
-	MATRIX_KEY(7, 6, KEY_Q)
294
-	MATRIX_KEY(7, 7, KEY_W)
295
-	MATRIX_KEY(7, 2, KEY_E)
296
-	MATRIX_KEY(1, 0, KEY_R)
297
-	MATRIX_KEY(4, 4, KEY_T)
298
-	MATRIX_KEY(1, 2, KEY_Y)
299
-	MATRIX_KEY(6, 7, KEY_U)
300
-	MATRIX_KEY(2, 2, KEY_I)
301
-	MATRIX_KEY(5, 6, KEY_O)
302
-	MATRIX_KEY(3, 7, KEY_P)
303
-	MATRIX_KEY(6, 5, KEY_BACKSPACE)
304
-
305
-	/* Row 3 */
306
-	MATRIX_KEY(5, 4, KEY_TAB)
307
-	MATRIX_KEY(5, 7, KEY_A)
308
-	MATRIX_KEY(2, 7, KEY_S)
309
-	MATRIX_KEY(7, 0, KEY_D)
310
-	MATRIX_KEY(2, 6, KEY_F)
311
-	MATRIX_KEY(6, 2, KEY_G)
312
-	MATRIX_KEY(6, 6, KEY_H)
313
-	MATRIX_KEY(1, 4, KEY_J)
314
-	MATRIX_KEY(3, 1, KEY_K)
315
-	MATRIX_KEY(2, 1, KEY_L)
316
-	MATRIX_KEY(4, 6, KEY_ENTER)
317
-
318
-	/* Row 4 */
319
-	MATRIX_KEY(3, 6, KEY_LEFTSHIFT)		/* KEY_CAPSLOCK */
320
-	MATRIX_KEY(6, 1, KEY_Z)
321
-	MATRIX_KEY(7, 4, KEY_X)
322
-	MATRIX_KEY(5, 1, KEY_C)
323
-	MATRIX_KEY(1, 7, KEY_V)
324
-	MATRIX_KEY(2, 4, KEY_B)
325
-	MATRIX_KEY(4, 1, KEY_N)
326
-	MATRIX_KEY(1, 1, KEY_M)
327
-	MATRIX_KEY(3, 5, KEY_COMMA)
328
-	MATRIX_KEY(5, 2, KEY_DOT)
329
-	MATRIX_KEY(6, 3, KEY_UP)
330
-	MATRIX_KEY(7, 3, KEY_OK)
331
-
332
-	/* Row 5 */
333
-	MATRIX_KEY(2, 5, KEY_LEFTCTRL)		/* KEY_LEFTSHIFT */
334
-	MATRIX_KEY(4, 5, KEY_LEFTALT)		/* SYM */
335
-	MATRIX_KEY(6, 0, KEY_MINUS)
336
-	MATRIX_KEY(4, 7, KEY_EQUAL)
337
-	MATRIX_KEY(1, 5, KEY_SPACE)
338
-	MATRIX_KEY(3, 2, KEY_SLASH)
339
-	MATRIX_KEY(4, 3, KEY_LEFT)
340
-	MATRIX_KEY(5, 3, KEY_DOWN)
341
-	MATRIX_KEY(3, 3, KEY_RIGHT)
342
-
343
-	/* Side buttons, KEY_VOLUMEDOWN and KEY_PWER are on CPCAP? */
344
-	MATRIX_KEY(5, 0, KEY_VOLUMEUP)
345
-	>;
346
-};
347
-
348
-&mmc1 {
349
-	vmmc-supply = <&vwlan2>;
350
-	bus-width = <4>;
351
-	cd-gpios = <&gpio6 16 GPIO_ACTIVE_LOW>;	/* gpio176 */
352
-};
353
-
354
-&mmc2 {
355
-	vmmc-supply = <&vsdio>;
356
-	bus-width = <8>;
357
-	ti,non-removable;
358
-};
359
-
360
-&mmc3 {
361
-	vmmc-supply = <&wl12xx_vmmc>;
362
-	interrupts-extended = <&wakeupgen GIC_SPI 94 IRQ_TYPE_LEVEL_HIGH
363
-			       &omap4_pmx_core 0xde>;
364
-
365
-	non-removable;
366
-	bus-width = <4>;
367
-	cap-power-off-card;
368
-
369
-	#address-cells = <1>;
370
-	#size-cells = <0>;
371
-	wlcore: wlcore@2 {
372
-		compatible = "ti,wl1285", "ti,wl1283";
373
-		reg = <2>;
374
-		interrupt-parent = <&gpio4>;
375
-		interrupts = <4 IRQ_TYPE_EDGE_RISING>; /* gpio100 */
376
-		ref-clock-frequency = <26000000>;
377
-		tcxo-clock-frequency = <26000000>;
378
-	};
379
-};
380
-
381
-&i2c1 {
382
-	lm3532@38 {
383
-		compatible = "ti,lm3532";
384
-		reg = <0x38>;
385
-
386
-		enable-gpios = <&gpio6 12 GPIO_ACTIVE_HIGH>;
387
-
388
-		lcd_backlight: backlight {
389
-			compatible = "ti,lm3532-backlight";
390
-
391
-			lcd {
392
-				led-sources = <0 1 2>;
393
-				ramp-up-msec = <1>;
394
-				ramp-down-msec = <0>;
395
-			};
396
-		};
397
-	};
398
-};
399
-
400
-&i2c2 {
401
-	touchscreen@4a {
402
-		compatible = "atmel,maxtouch";
403
-		reg = <0x4a>;
404
-		pinctrl-names = "default";
405
-		pinctrl-0 = <&touchscreen_pins>;
406
-
407
-		reset-gpios = <&gpio6 13 GPIO_ACTIVE_HIGH>; /* gpio173 */
408
-
409
-		/* gpio_183 with sys_nirq2 pad as wakeup */
410
-		interrupts-extended = <&gpio6 23 IRQ_TYPE_EDGE_FALLING>,
411
-				      <&omap4_pmx_core 0x160>;
412
-		interrupt-names = "irq", "wakeup";
413
-		wakeup-source;
414
-	};
415
-
416
-	isl29030@44 {
417
-		compatible = "isil,isl29030";
418
-		reg = <0x44>;
419
-
420
-		pinctrl-names = "default";
421
-		pinctrl-0 = <&als_proximity_pins>;
422
-
423
-		interrupt-parent = <&gpio6>;
424
-		interrupts = <17 IRQ_TYPE_LEVEL_LOW>; /* gpio177 */
425
-	};
426
-};
427
-
428
-&omap4_pmx_core {
429
-
430
-	/* hdmi_hpd.gpio_63 */
431
-	hdmi_hpd_gpio: pinmux_hdmi_hpd_pins {
432
-		pinctrl-single,pins = <
433
-		OMAP4_IOPAD(0x098, PIN_INPUT | MUX_MODE3)
434
-		>;
435
-	};
436
-
437
-	/* hdmi_cec.hdmi_cec, hdmi_scl.hdmi_scl, hdmi_sda.hdmi_sda */
438
-	dss_hdmi_pins: pinmux_dss_hdmi_pins {
439
-		pinctrl-single,pins = <
440
-		OMAP4_IOPAD(0x09a, PIN_INPUT | MUX_MODE0)
441
-		OMAP4_IOPAD(0x09c, PIN_INPUT | MUX_MODE0)
442
-		OMAP4_IOPAD(0x09e, PIN_INPUT | MUX_MODE0)
443
-		>;
444
-	};
445
-
446
-	/* gpmc_ncs0.gpio_50 */
447
-	poweroff_gpio: pinmux_poweroff_pins {
448
-		pinctrl-single,pins = <
449
-		OMAP4_IOPAD(0x074, PIN_OUTPUT_PULLUP | MUX_MODE3)
450
-		>;
451
-	};
452
-
453
-	/* kpd_row0.gpio_178 */
454
-	tmp105_irq: pinmux_tmp105_irq {
455
-		pinctrl-single,pins = <
456
-		OMAP4_IOPAD(0x18e, PIN_INPUT_PULLUP | MUX_MODE3)
457
-		>;
458
-	};
459
-
460
-	usb_gpio_mux_sel1: pinmux_usb_gpio_mux_sel1_pins {
461
-		/* gpio_60 */
462
-		pinctrl-single,pins = <
463
-		OMAP4_IOPAD(0x088, PIN_OUTPUT | MUX_MODE3)
464
-		>;
465
-	};
466
-
467
-	touchscreen_pins: pinmux_touchscreen_pins {
468
-		pinctrl-single,pins = <
469
-		OMAP4_IOPAD(0x180, PIN_OUTPUT | MUX_MODE3)
470
-		OMAP4_IOPAD(0x1a0, PIN_INPUT_PULLUP | MUX_MODE3)
471
-		>;
472
-	};
473
-
474
-	als_proximity_pins: pinmux_als_proximity_pins {
475
-		pinctrl-single,pins = <
476
-		OMAP4_IOPAD(0x18c, PIN_INPUT_PULLUP | MUX_MODE3)
477
-		>;
478
-	};
479
-
480
-	usb_mdm6600_pins: pinmux_usb_mdm6600_pins {
481
-		pinctrl-single,pins = <
482
-		/* enable 0x4a1000d8 usbb1_ulpitll_dat7.gpio_95 ag16 */
483
-		OMAP4_IOPAD(0x0d8, PIN_INPUT | MUX_MODE3)
484
-
485
-		/* power 0x4a10007c gpmc_nwp.gpio_54 c25 */
486
-		OMAP4_IOPAD(0x07c, PIN_OUTPUT | MUX_MODE3)
487
-
488
-		/* reset 0x4a100072 gpmc_a25.gpio_49 d20 */
489
-		OMAP4_IOPAD(0x072, PIN_OUTPUT | MUX_MODE3)
490
-
491
-		/* mode0/bpwake 0x4a10014e sdmmc5_dat1.gpio_148 af4 */
492
-		OMAP4_IOPAD(0x14e, PIN_OUTPUT | MUX_MODE3)
493
-
494
-		/* mode1/apwake 0x4a100150 sdmmc5_dat2.gpio_149 ag3 */
495
-		OMAP4_IOPAD(0x150, PIN_OFF_OUTPUT_LOW | PIN_INPUT | MUX_MODE3)
496
-
497
-		/* status0 0x4a10007e gpmc_clk.gpio_55 b22 */
498
-		OMAP4_IOPAD(0x07e, PIN_INPUT | MUX_MODE3)
499
-
500
-		/* status1 0x4a10007a gpmc_ncs3.gpio_53 c22 */
501
-		OMAP4_IOPAD(0x07a, PIN_INPUT | MUX_MODE3)
502
-
503
-		/* status2 0x4a100078 gpmc_ncs2.gpio_52 d21 */
504
-		OMAP4_IOPAD(0x078, PIN_INPUT | MUX_MODE3)
505
-
506
-		/* cmd0 0x4a100094 gpmc_ncs6.gpio_103 c24 */
507
-		OMAP4_IOPAD(0x094, PIN_OUTPUT | MUX_MODE3)
508
-
509
-		/* cmd1 0x4a100096 gpmc_ncs7.gpio_104 d24 */
510
-		OMAP4_IOPAD(0x096, PIN_OUTPUT | MUX_MODE3)
511
-
512
-		/* cmd2 0x4a100142 uart3_rts_sd.gpio_142 f28 */
513
-		OMAP4_IOPAD(0x142, PIN_OUTPUT | MUX_MODE3)
514
-		>;
515
-	};
516
-
517
-	usb_ulpi_pins: pinmux_usb_ulpi_pins {
518
-		pinctrl-single,pins = <
519
-		OMAP4_IOPAD(0x196, MUX_MODE7)
520
-		OMAP4_IOPAD(0x198, MUX_MODE7)
521
-		OMAP4_IOPAD(0x1b2, PIN_INPUT_PULLUP | MUX_MODE0)
522
-		OMAP4_IOPAD(0x1b4, PIN_INPUT_PULLUP | MUX_MODE0)
523
-		OMAP4_IOPAD(0x1b6, PIN_INPUT_PULLUP | MUX_MODE0)
524
-		OMAP4_IOPAD(0x1b8, PIN_INPUT_PULLUP | MUX_MODE0)
525
-		OMAP4_IOPAD(0x1ba, PIN_INPUT_PULLUP | MUX_MODE0)
526
-		OMAP4_IOPAD(0x1bc, PIN_INPUT_PULLUP | MUX_MODE0)
527
-		OMAP4_IOPAD(0x1be, PIN_INPUT_PULLUP | MUX_MODE0)
528
-		OMAP4_IOPAD(0x1c0, PIN_INPUT_PULLUP | MUX_MODE0)
529
-		OMAP4_IOPAD(0x1c2, PIN_INPUT_PULLUP | MUX_MODE0)
530
-		OMAP4_IOPAD(0x1c4, PIN_INPUT_PULLUP | MUX_MODE0)
531
-		OMAP4_IOPAD(0x1c6, PIN_INPUT_PULLUP | MUX_MODE0)
532
-		OMAP4_IOPAD(0x1c8, PIN_INPUT_PULLUP | MUX_MODE0)
533
-		>;
534
-	};
535
-
536
-	/* usb0_otg_dp and usb0_otg_dm */
537
-	usb_utmi_pins: pinmux_usb_utmi_pins {
538
-		pinctrl-single,pins = <
539
-		OMAP4_IOPAD(0x196, PIN_INPUT | MUX_MODE0)
540
-		OMAP4_IOPAD(0x198, PIN_INPUT | MUX_MODE0)
541
-		OMAP4_IOPAD(0x1b2, PIN_INPUT_PULLUP | MUX_MODE7)
542
-		OMAP4_IOPAD(0x1b4, PIN_INPUT_PULLUP | MUX_MODE7)
543
-		OMAP4_IOPAD(0x1b6, PIN_INPUT_PULLUP | MUX_MODE7)
544
-		OMAP4_IOPAD(0x1b8, PIN_INPUT_PULLUP | MUX_MODE7)
545
-		OMAP4_IOPAD(0x1ba, PIN_INPUT_PULLUP | MUX_MODE7)
546
-		OMAP4_IOPAD(0x1bc, PIN_INPUT_PULLUP | MUX_MODE7)
547
-		OMAP4_IOPAD(0x1be, PIN_INPUT_PULLUP | MUX_MODE7)
548
-		OMAP4_IOPAD(0x1c0, PIN_INPUT_PULLUP | MUX_MODE7)
549
-		OMAP4_IOPAD(0x1c2, PIN_INPUT_PULLUP | MUX_MODE7)
550
-		OMAP4_IOPAD(0x1c4, PIN_INPUT_PULLUP | MUX_MODE7)
551
-		OMAP4_IOPAD(0x1c6, PIN_INPUT_PULLUP | MUX_MODE7)
552
-		OMAP4_IOPAD(0x1c8, PIN_INPUT_PULLUP | MUX_MODE7)
553
-		>;
554
-	};
555
-
556
-	/*
557
-	 * Note that the v3.0.8 stock userspace dynamically remuxes uart1
558
-	 * rts pin probably for PM purposes to PIN_INPUT_PULLUP | MUX_MODE7
559
-	 * when not used. If needed, we can add rts pin remux later based
560
-	 * on power measurements.
561
-	 */
562
-	uart1_pins: pinmux_uart1_pins {
563
-		pinctrl-single,pins = <
564
-		/* 0x4a10013c mcspi1_cs2.uart1_cts ag23 */
565
-		OMAP4_IOPAD(0x13c, PIN_INPUT_PULLUP | MUX_MODE1)
566
-
567
-		/* 0x4a10013e mcspi1_cs3.uart1_rts ah23 */
568
-		OMAP4_IOPAD(0x13e, MUX_MODE1)
569
-
570
-		/* 0x4a100140 uart3_cts_rctx.uart1_tx f27 */
571
-		OMAP4_IOPAD(0x140, PIN_OUTPUT | MUX_MODE1)
572
-
573
-		/* 0x4a1001ca dpm_emu14.uart1_rx aa3 */
574
-		OMAP4_IOPAD(0x1ca, PIN_INPUT_PULLUP | MUX_MODE2)
575
-		>;
576
-	};
577
-
578
-	/* uart3_tx_irtx and uart3_rx_irrx */
579
-	uart3_pins: pinmux_uart3_pins {
580
-		pinctrl-single,pins = <
581
-		OMAP4_IOPAD(0x196, MUX_MODE7)
582
-		OMAP4_IOPAD(0x198, MUX_MODE7)
583
-		OMAP4_IOPAD(0x1b2, PIN_INPUT_PULLUP | MUX_MODE7)
584
-		OMAP4_IOPAD(0x1b4, PIN_INPUT_PULLUP | MUX_MODE7)
585
-		OMAP4_IOPAD(0x1b6, PIN_INPUT_PULLUP | MUX_MODE7)
586
-		OMAP4_IOPAD(0x1b8, PIN_INPUT_PULLUP | MUX_MODE7)
587
-		OMAP4_IOPAD(0x1ba, MUX_MODE2)
588
-		OMAP4_IOPAD(0x1bc, PIN_INPUT | MUX_MODE2)
589
-		OMAP4_IOPAD(0x1be, PIN_INPUT_PULLUP | MUX_MODE7)
590
-		OMAP4_IOPAD(0x1c0, PIN_INPUT_PULLUP | MUX_MODE7)
591
-		OMAP4_IOPAD(0x1c2, PIN_INPUT_PULLUP | MUX_MODE7)
592
-		OMAP4_IOPAD(0x1c4, PIN_INPUT_PULLUP | MUX_MODE7)
593
-		OMAP4_IOPAD(0x1c6, PIN_INPUT_PULLUP | MUX_MODE7)
594
-		OMAP4_IOPAD(0x1c8, PIN_INPUT_PULLUP | MUX_MODE7)
595
-		>;
596
-	};
597
-
598
-	uart4_pins: pinmux_uart4_pins {
599
-		pinctrl-single,pins = <
600
-		OMAP4_IOPAD(0x15c, PIN_INPUT | MUX_MODE0)		/* uart4_rx */
601
-		OMAP4_IOPAD(0x15e, PIN_OUTPUT | MUX_MODE0)		/* uart4_tx */
602
-		OMAP4_IOPAD(0x110, PIN_INPUT_PULLUP | MUX_MODE5)	/* uart4_cts */
603
-		OMAP4_IOPAD(0x112, PIN_OUTPUT_PULLUP | MUX_MODE5)	/* uart4_rts */
604
-		>;
605
-	};
606
-
607
-	mcbsp2_pins: pinmux_mcbsp2_pins {
608
-		pinctrl-single,pins = <
609
-		OMAP4_IOPAD(0x0f6, PIN_INPUT | MUX_MODE0)	/* abe_mcbsp2_clkx */
610
-		OMAP4_IOPAD(0x0f8, PIN_INPUT | MUX_MODE0)	/* abe_mcbsp2_dr */
611
-		OMAP4_IOPAD(0x0fa, PIN_OUTPUT | MUX_MODE0)	/* abe_mcbsp2_dx */
612
-		OMAP4_IOPAD(0x0fc, PIN_INPUT | MUX_MODE0)	/* abe_mcbsp2_fsx */
613
-		>;
614
-	};
615
-
616
-	mcbsp3_pins: pinmux_mcbsp3_pins {
617
-		pinctrl-single,pins = <
618
-		OMAP4_IOPAD(0x106, PIN_INPUT | MUX_MODE1)	/* abe_mcbsp3_dr */
619
-		OMAP4_IOPAD(0x108, PIN_OUTPUT | MUX_MODE1)	/* abe_mcbsp3_dx */
620
-		OMAP4_IOPAD(0x10a, PIN_INPUT | MUX_MODE1)	/* abe_mcbsp3_clkx */
621
-		OMAP4_IOPAD(0x10c, PIN_INPUT | MUX_MODE1)	/* abe_mcbsp3_fsx */
622
-		>;
623
-	};
624
-
625
-	vibrator_direction_pin: pinmux_vibrator_direction_pin {
626
-		pinctrl-single,pins = <
627
-		OMAP4_IOPAD(0x1ce, PIN_OUTPUT | MUX_MODE1)	/* dmtimer8_pwm_evt (gpio_27) */
628
-		>;
629
-	};
630
-
631
-	vibrator_enable_pin: pinmux_vibrator_enable_pin {
632
-		pinctrl-single,pins = <
633
-		OMAP4_IOPAD(0X1d0, PIN_OUTPUT | MUX_MODE1)	/* dmtimer9_pwm_evt (gpio_28) */
634
-		>;
635
-	};
636
-};
637
-
638
-&omap4_pmx_wkup {
639
-	usb_gpio_mux_sel2: pinmux_usb_gpio_mux_sel2_pins {
640
-		/* gpio_wk0 */
641
-		pinctrl-single,pins = <
642
-		OMAP4_IOPAD(0x040, PIN_OUTPUT_PULLDOWN | MUX_MODE3)
643
-		>;
644
-	};
645
-};
646
-
647
-/* Configure pwm clock source for timers 8 & 9 */
648
-&timer8 {
649
-	assigned-clocks = <&abe_clkctrl OMAP4_TIMER8_CLKCTRL 24>;
650
-	assigned-clock-parents = <&sys_clkin_ck>;
651
-};
652
-
653
-&timer9 {
654
-	assigned-clocks = <&l4_per_clkctrl OMAP4_TIMER9_CLKCTRL 24>;
655
-	assigned-clock-parents = <&sys_clkin_ck>;
656
-};
657
-
658
-/*
659
- * As uart1 is wired to mdm6600 with rts and cts, we can use the cts pin for
660
- * uart1 wakeirq.
661
- */
662
-&uart1 {
663
-	pinctrl-names = "default";
664
-	pinctrl-0 = <&uart1_pins>;
665
-	interrupts-extended = <&wakeupgen GIC_SPI 72 IRQ_TYPE_LEVEL_HIGH
666
-			       &omap4_pmx_core 0xfc>;
667
-};
668
-
669
-&uart3 {
670
-	interrupts-extended = <&wakeupgen GIC_SPI 74 IRQ_TYPE_LEVEL_HIGH
671
-			       &omap4_pmx_core 0x17c>;
672
-};
673
-
674
-&uart4 {
675
-	pinctrl-names = "default";
676
-	pinctrl-0 = <&uart4_pins>;
677
-
678
-	bluetooth {
679
-		compatible = "ti,wl1285-st";
680
-		enable-gpios = <&gpio6 14 GPIO_ACTIVE_HIGH>; /* gpio 174 */
681
-		max-speed = <3686400>;
682
-	};
683
-};
684
-
685
-&usbhsohci {
686
-	phys = <&fsusb1_phy>;
687
-	phy-names = "usb";
688
-};
689
-
690
-&usbhsehci {
691
-	phys = <&hsusb2_phy>;
692
-};
693
-
694
-&usbhshost {
695
-	port1-mode = "ohci-phy-4pin-dpdm";
696
-	port2-mode = "ehci-tll";
697
-};
698
-
699
-/* Internal UTMI+ PHY used for OTG, CPCAP ULPI PHY for detection and charger */
700
-&usb_otg_hs {
701
-	interface-type = <1>;
702
-	mode = <3>;
703
-	power = <50>;
704
-};
705
-
706
-&i2c4 {
707
-	ak8975: magnetometer@c {
708
-		compatible = "asahi-kasei,ak8975";
709
-		reg = <0x0c>;
710
-
711
-		vdd-supply = <&vhvio>;
712
-
713
-		interrupt-parent = <&gpio6>;
714
-		interrupts = <15 IRQ_TYPE_EDGE_RISING>; /* gpio175 */
715
-
716
-		rotation-matrix = "-1", "0", "0",
717
-				  "0", "1", "0",
718
-				  "0", "0", "-1";
719
-
720
-	};
721
-
722
-	lis3dh: accelerometer@18 {
723
-		compatible = "st,lis3dh-accel";
724
-		reg = <0x18>;
725
-
726
-		vdd-supply = <&vhvio>;
727
-
728
-		interrupt-parent = <&gpio2>;
729
-		interrupts = <2 IRQ_TYPE_EDGE_BOTH>; /* gpio34 */
730
-
731
-		rotation-matrix = "0", "-1", "0",
732
-				  "1", "0", "0",
733
-				  "0", "0", "1";
734
-	};
735
-};
736
-
737
-&mcbsp2 {
738
-	#sound-dai-cells = <0>;
739
-	pinctrl-names = "default";
740
-	pinctrl-0 = <&mcbsp2_pins>;
741
-	status = "okay";
742
-
743
-	mcbsp2_port: port {
744
-		cpu_dai2: endpoint {
745
-			dai-format = "i2s";
746
-			remote-endpoint = <&cpcap_audio_codec0>;
747
-			frame-master = <&cpcap_audio_codec0>;
748
-			bitclock-master = <&cpcap_audio_codec0>;
749
-		};
750
-	};
751
-};
752
-
753
-&mcbsp3 {
754
-	#sound-dai-cells = <0>;
755
-	pinctrl-names = "default";
756
-	pinctrl-0 = <&mcbsp3_pins>;
757
-	status = "okay";
758
-
759
-	mcbsp3_port: port {
760
-		cpu_dai3: endpoint {
761
-			dai-format = "dsp_a";
762
-			frame-master = <&cpcap_audio_codec1>;
763
-			bitclock-master = <&cpcap_audio_codec1>;
764
-			remote-endpoint = <&cpcap_audio_codec1>;
765
-		};
766
-	};
767
-};
768
-
769
-&cpcap_audio_codec0 {
770
-	remote-endpoint = <&cpu_dai2>;
771
-};
772
-
773
-&cpcap_audio_codec1 {
774
-	remote-endpoint = <&cpu_dai3>;
7759 };