forked from ~ljy/RK356X_SDK_RELEASE
blame | history | patch | commit | commitdiff
hc
2023-12-09 b22da3d8526a935aa31e086e63f60ff3246cb61c 
 kernel/drivers/i2c/busses/i2c-i801.c
....@@ -1,3 +1,4 @@
1
+// SPDX-License-Identifier: GPL-2.0-or-later
12 /*
23     Copyright (c) 1998 - 2002  Frodo Looijaard <frodol@dds.nl>,
34     Philip Edelbrock <phil@netroedge.com>, and Mark D. Studebaker
....@@ -6,15 +7,6 @@
67     Copyright (C) 2010         Intel Corporation,
78                                David Woodhouse <dwmw2@infradead.org>
89 
9
-    This program is free software; you can redistribute it and/or modify
10
-    it under the terms of the GNU General Public License as published by
11
-    the Free Software Foundation; either version 2 of the License, or
12
-    (at your option) any later version.
13
-
14
-    This program is distributed in the hope that it will be useful,
15
-    but WITHOUT ANY WARRANTY; without even the implied warranty of
16
-    MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
17
-    GNU General Public License for more details.
1810 */
1911 
2012 /*
....@@ -62,6 +54,7 @@
6254  * Sunrise Point-H (PCH) 	0xa123  32	hard	yes	yes	yes
6355  * Sunrise Point-LP (PCH)	0x9d23	32	hard	yes	yes	yes
6456  * DNV (SOC)			0x19df	32	hard	yes	yes	yes
57
+ * Emmitsburg (PCH)		0x1bc9	32	hard	yes	yes	yes
6558  * Broxton (SOC)		0x5ad4	32	hard	yes	yes	yes
6659  * Lewisburg (PCH)		0xa1a3	32	hard	yes	yes	yes
6760  * Lewisburg Supersku (PCH)	0xa223	32	hard	yes	yes	yes
....@@ -72,18 +65,25 @@
7265  * Cedar Fork (PCH)		0x18df	32	hard	yes	yes	yes
7366  * Ice Lake-LP (PCH)		0x34a3	32	hard	yes	yes	yes
7467  * Comet Lake (PCH)		0x02a3	32	hard	yes	yes	yes
68
+ * Comet Lake-H (PCH)		0x06a3	32	hard	yes	yes	yes
69
+ * Elkhart Lake (PCH)		0x4b23	32	hard	yes	yes	yes
70
+ * Tiger Lake-LP (PCH)		0xa0a3	32	hard	yes	yes	yes
71
+ * Tiger Lake-H (PCH)		0x43a3	32	hard	yes	yes	yes
72
+ * Jasper Lake (SOC)		0x4da3	32	hard	yes	yes	yes
73
+ * Comet Lake-V (PCH)		0xa3a3	32	hard	yes	yes	yes
74
+ * Alder Lake-S (PCH)		0x7aa3	32	hard	yes	yes	yes
7575  *
7676  * Features supported by this driver:
7777  * Software PEC				no
7878  * Hardware PEC				yes
7979  * Block buffer				yes
80
- * Block process call transaction	no
80
+ * Block process call transaction	yes
8181  * I2C block read transaction		yes (doesn't use the block buffer)
8282  * Slave mode				no
8383  * SMBus Host Notify			yes
8484  * Interrupt processing			yes
8585  *
86
- * See the file Documentation/i2c/busses/i2c-i801 for details.
86
+ * See the file Documentation/i2c/busses/i2c-i801.rst for details.
8787  */
8888 
8989 #include <linux/interrupt.h>
....@@ -100,6 +100,7 @@
100100 #include <linux/io.h>
101101 #include <linux/dmi.h>
102102 #include <linux/slab.h>
103
+#include <linux/string.h>
103104 #include <linux/wait.h>
104105 #include <linux/err.h>
105106 #include <linux/platform_device.h>
....@@ -107,7 +108,7 @@
107108 #include <linux/pm_runtime.h>
108109 
109110 #if IS_ENABLED(CONFIG_I2C_MUX_GPIO) && defined CONFIG_DMI
110
-#include <linux/gpio.h>
111
+#include <linux/gpio/machine.h>
111112 #include <linux/platform_data/i2c-mux-gpio.h>
112113 #endif
113114 
....@@ -133,11 +134,6 @@
133134 #define SMBHSTCFG	0x040
134135 #define TCOBASE		0x050
135136 #define TCOCTL		0x054
136
-
137
-#define ACPIBASE		0x040
138
-#define ACPIBASE_SMI_OFF	0x030
139
-#define ACPICTRL		0x044
140
-#define ACPICTRL_EN		0x080
141137 
142138 #define SBREG_BAR		0x10
143139 #define SBREG_SMBCTRL		0xc6000c
....@@ -177,6 +173,7 @@
177173 #define I801_PROC_CALL		0x10	/* unimplemented */
178174 #define I801_BLOCK_DATA		0x14
179175 #define I801_I2C_BLOCK_DATA	0x18	/* ICH5 and later */
176
+#define I801_BLOCK_PROC_CALL	0x1C
180177 
181178 /* I801 Host Control register bits */
182179 #define SMBHSTCNT_INTREN	BIT(0)
....@@ -208,9 +205,12 @@
208205 				 STATUS_ERROR_FLAGS)
209206 
210207 /* Older devices have their ID defined in <linux/pci_ids.h> */
208
+#define PCI_DEVICE_ID_INTEL_COMETLAKE_SMBUS		0x02a3
209
+#define PCI_DEVICE_ID_INTEL_COMETLAKE_H_SMBUS		0x06a3
211210 #define PCI_DEVICE_ID_INTEL_BAYTRAIL_SMBUS		0x0f12
212211 #define PCI_DEVICE_ID_INTEL_CDF_SMBUS			0x18df
213212 #define PCI_DEVICE_ID_INTEL_DNV_SMBUS			0x19df
213
+#define PCI_DEVICE_ID_INTEL_EBG_SMBUS			0x1bc9
214214 #define PCI_DEVICE_ID_INTEL_COUGARPOINT_SMBUS		0x1c22
215215 #define PCI_DEVICE_ID_INTEL_PATSBURG_SMBUS		0x1d22
216216 /* Patsburg also has three 'Integrated Device Function' SMBus controllers */
....@@ -225,7 +225,11 @@
225225 #define PCI_DEVICE_ID_INTEL_GEMINILAKE_SMBUS		0x31d4
226226 #define PCI_DEVICE_ID_INTEL_ICELAKE_LP_SMBUS		0x34a3
227227 #define PCI_DEVICE_ID_INTEL_5_3400_SERIES_SMBUS		0x3b30
228
+#define PCI_DEVICE_ID_INTEL_TIGERLAKE_H_SMBUS		0x43a3
229
+#define PCI_DEVICE_ID_INTEL_ELKHART_LAKE_SMBUS		0x4b23
230
+#define PCI_DEVICE_ID_INTEL_JASPER_LAKE_SMBUS		0x4da3
228231 #define PCI_DEVICE_ID_INTEL_BROXTON_SMBUS		0x5ad4
232
+#define PCI_DEVICE_ID_INTEL_ALDER_LAKE_S_SMBUS		0x7aa3
229233 #define PCI_DEVICE_ID_INTEL_LYNXPOINT_SMBUS		0x8c22
230234 #define PCI_DEVICE_ID_INTEL_WILDCATPOINT_SMBUS		0x8ca2
231235 #define PCI_DEVICE_ID_INTEL_WELLSBURG_SMBUS		0x8d22
....@@ -236,12 +240,13 @@
236240 #define PCI_DEVICE_ID_INTEL_WILDCATPOINT_LP_SMBUS	0x9ca2
237241 #define PCI_DEVICE_ID_INTEL_SUNRISEPOINT_LP_SMBUS	0x9d23
238242 #define PCI_DEVICE_ID_INTEL_CANNONLAKE_LP_SMBUS		0x9da3
243
+#define PCI_DEVICE_ID_INTEL_TIGERLAKE_LP_SMBUS		0xa0a3
239244 #define PCI_DEVICE_ID_INTEL_SUNRISEPOINT_H_SMBUS	0xa123
240245 #define PCI_DEVICE_ID_INTEL_LEWISBURG_SMBUS		0xa1a3
241246 #define PCI_DEVICE_ID_INTEL_LEWISBURG_SSKU_SMBUS	0xa223
242247 #define PCI_DEVICE_ID_INTEL_KABYLAKE_PCH_H_SMBUS	0xa2a3
243248 #define PCI_DEVICE_ID_INTEL_CANNONLAKE_H_SMBUS		0xa323
244
-#define PCI_DEVICE_ID_INTEL_COMETLAKE_SMBUS		0x02a3
249
+#define PCI_DEVICE_ID_INTEL_COMETLAKE_V_SMBUS		0xa3a3
245250 
246251 struct i801_mux_config {
247252 	char *gpio_chip;
....@@ -274,6 +279,7 @@
274279 #if IS_ENABLED(CONFIG_I2C_MUX_GPIO) && defined CONFIG_DMI
275280 	const struct i801_mux_config *mux_drvdata;
276281 	struct platform_device *mux_pdev;
282
+	struct gpiod_lookup_table *lookup;
277283 #endif
278284 	struct platform_device *tco_pdev;
279285 
....@@ -293,7 +299,8 @@
293299 #define FEATURE_HOST_NOTIFY	BIT(5)
294300 /* Not really a feature, but it's convenient to handle it as such */
295301 #define FEATURE_IDF		BIT(15)
296
-#define FEATURE_TCO		BIT(16)
302
+#define FEATURE_TCO_SPT		BIT(16)
303
+#define FEATURE_TCO_CNL		BIT(17)
297304 
298305 static const char *i801_feature_names[] = {
299306 	"SMBus PEC",
....@@ -515,10 +522,23 @@
515522 
516523 static int i801_block_transaction_by_block(struct i801_priv *priv,
517524 					   union i2c_smbus_data *data,
518
-					   char read_write, int hwpec)
525
+					   char read_write, int command,
526
+					   int hwpec)
519527 {
520528 	int i, len;
521529 	int status;
530
+	int xact = hwpec ? SMBHSTCNT_PEC_EN : 0;
531
+
532
+	switch (command) {
533
+	case I2C_SMBUS_BLOCK_PROC_CALL:
534
+		xact |= I801_BLOCK_PROC_CALL;
535
+		break;
536
+	case I2C_SMBUS_BLOCK_DATA:
537
+		xact |= I801_BLOCK_DATA;
538
+		break;
539
+	default:
540
+		return -EOPNOTSUPP;
541
+	}
522542 
523543 	inb_p(SMBHSTCNT(priv)); /* reset the data buffer index */
524544 
....@@ -530,12 +550,12 @@
530550 			outb_p(data->block[i+1], SMBBLKDAT(priv));
531551 	}
532552 
533
-	status = i801_transaction(priv, I801_BLOCK_DATA |
534
-				  (hwpec ? SMBHSTCNT_PEC_EN : 0));
553
+	status = i801_transaction(priv, xact);
535554 	if (status)
536555 		return status;
537556 
538
-	if (read_write == I2C_SMBUS_READ) {
557
+	if (read_write == I2C_SMBUS_READ ||
558
+	    command == I2C_SMBUS_BLOCK_PROC_CALL) {
539559 		len = inb_p(SMBHSTDAT0(priv));
540560 		if (len < 1 || len > I2C_SMBUS_BLOCK_MAX)
541561 			return -EPROTO;
....@@ -673,6 +693,9 @@
673693 	int result;
674694 	const struct i2c_adapter *adap = &priv->adapter;
675695 
696
+	if (command == I2C_SMBUS_BLOCK_PROC_CALL)
697
+		return -EOPNOTSUPP;
698
+
676699 	result = i801_check_pre(priv);
677700 	if (result < 0)
678701 		return result;
....@@ -799,7 +822,8 @@
799822 	 && command != I2C_SMBUS_I2C_BLOCK_DATA
800823 	 && i801_set_block_buffer_mode(priv) == 0)
801824 		result = i801_block_transaction_by_block(priv, data,
802
-							 read_write, hwpec);
825
+							 read_write,
826
+							 command, hwpec);
803827 	else
804828 		result = i801_block_transaction_byte_by_byte(priv, data,
805829 							     read_write,
....@@ -891,6 +915,15 @@
891915 			outb_p(command, SMBHSTCMD(priv));
892916 		block = 1;
893917 		break;
918
+	case I2C_SMBUS_BLOCK_PROC_CALL:
919
+		/*
920
+		 * Bit 0 of the slave address register always indicate a write
921
+		 * command.
922
+		 */
923
+		outb_p((addr & 0x7f) << 1, SMBHSTADD(priv));
924
+		outb_p(command, SMBHSTCMD(priv));
925
+		block = 1;
926
+		break;
894927 	default:
895928 		dev_err(&priv->pci_dev->dev, "Unsupported transaction %d\n",
896929 			size);
....@@ -936,6 +969,9 @@
936969 	}
937970 
938971 out:
972
+	/* Unlock the SMBus device for use by BIOS/ACPI */
973
+	outb_p(SMBHSTSTS_INUSE_STS, SMBHSTSTS(priv));
974
+
939975 	pm_runtime_mark_last_busy(&priv->pci_dev->dev);
940976 	pm_runtime_put_autosuspend(&priv->pci_dev->dev);
941977 	mutex_unlock(&priv->acpi_lock);
....@@ -951,6 +987,8 @@
951987 	       I2C_FUNC_SMBUS_BYTE_DATA | I2C_FUNC_SMBUS_WORD_DATA |
952988 	       I2C_FUNC_SMBUS_BLOCK_DATA | I2C_FUNC_SMBUS_WRITE_I2C_BLOCK |
953989 	       ((priv->features & FEATURE_SMBUS_PEC) ? I2C_FUNC_SMBUS_PEC : 0) |
990
+	       ((priv->features & FEATURE_BLOCK_PROC) ?
991
+		I2C_FUNC_SMBUS_BLOCK_PROC_CALL : 0) |
954992 	       ((priv->features & FEATURE_I2C_BLOCK_READ) ?
955993 		I2C_FUNC_SMBUS_READ_I2C_BLOCK : 0) |
956994 	       ((priv->features & FEATURE_HOST_NOTIFY) ?
....@@ -1026,6 +1064,7 @@
10261064 	{ PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_SUNRISEPOINT_LP_SMBUS) },
10271065 	{ PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_CDF_SMBUS) },
10281066 	{ PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_DNV_SMBUS) },
1067
+	{ PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_EBG_SMBUS) },
10291068 	{ PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_BROXTON_SMBUS) },
10301069 	{ PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_LEWISBURG_SMBUS) },
10311070 	{ PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_LEWISBURG_SSKU_SMBUS) },
....@@ -1034,6 +1073,13 @@
10341073 	{ PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_CANNONLAKE_LP_SMBUS) },
10351074 	{ PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_ICELAKE_LP_SMBUS) },
10361075 	{ PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_COMETLAKE_SMBUS) },
1076
+	{ PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_COMETLAKE_H_SMBUS) },
1077
+	{ PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_COMETLAKE_V_SMBUS) },
1078
+	{ PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_ELKHART_LAKE_SMBUS) },
1079
+	{ PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_TIGERLAKE_LP_SMBUS) },
1080
+	{ PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_TIGERLAKE_H_SMBUS) },
1081
+	{ PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_JASPER_LAKE_SMBUS) },
1082
+	{ PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_ALDER_LAKE_S_SMBUS) },
10371083 	{ 0, }
10381084 };
10391085 
....@@ -1099,7 +1145,7 @@
10991145 		memset(&info, 0, sizeof(struct i2c_board_info));
11001146 		info.addr = dmi_devices[i].i2c_addr;
11011147 		strlcpy(info.type, dmi_devices[i].i2c_type, I2C_NAME_SIZE);
1102
-		i2c_new_device(adap, &info);
1148
+		i2c_new_client_device(adap, &info);
11031149 		break;
11041150 	}
11051151 }
....@@ -1135,6 +1181,129 @@
11351181 	}
11361182 }
11371183 
1184
+/* NOTE: Keep this list in sync with drivers/platform/x86/dell-smo8800.c */
1185
+static const char *const acpi_smo8800_ids[] = {
1186
+	"SMO8800",
1187
+	"SMO8801",
1188
+	"SMO8810",
1189
+	"SMO8811",
1190
+	"SMO8820",
1191
+	"SMO8821",
1192
+	"SMO8830",
1193
+	"SMO8831",
1194
+};
1195
+
1196
+static acpi_status check_acpi_smo88xx_device(acpi_handle obj_handle,
1197
+					     u32 nesting_level,
1198
+					     void *context,
1199
+					     void **return_value)
1200
+{
1201
+	struct acpi_device_info *info;
1202
+	acpi_status status;
1203
+	char *hid;
1204
+	int i;
1205
+
1206
+	status = acpi_get_object_info(obj_handle, &info);
1207
+	if (ACPI_FAILURE(status))
1208
+		return AE_OK;
1209
+
1210
+	if (!(info->valid & ACPI_VALID_HID))
1211
+		goto smo88xx_not_found;
1212
+
1213
+	hid = info->hardware_id.string;
1214
+	if (!hid)
1215
+		goto smo88xx_not_found;
1216
+
1217
+	i = match_string(acpi_smo8800_ids, ARRAY_SIZE(acpi_smo8800_ids), hid);
1218
+	if (i < 0)
1219
+		goto smo88xx_not_found;
1220
+
1221
+	kfree(info);
1222
+
1223
+	*((bool *)return_value) = true;
1224
+	return AE_CTRL_TERMINATE;
1225
+
1226
+smo88xx_not_found:
1227
+	kfree(info);
1228
+	return AE_OK;
1229
+}
1230
+
1231
+static bool is_dell_system_with_lis3lv02d(void)
1232
+{
1233
+	bool found;
1234
+	const char *vendor;
1235
+
1236
+	vendor = dmi_get_system_info(DMI_SYS_VENDOR);
1237
+	if (!vendor || strcmp(vendor, "Dell Inc."))
1238
+		return false;
1239
+
1240
+	/*
1241
+	 * Check that ACPI device SMO88xx is present and is functioning.
1242
+	 * Function acpi_get_devices() already filters all ACPI devices
1243
+	 * which are not present or are not functioning.
1244
+	 * ACPI device SMO88xx represents our ST microelectronics lis3lv02d
1245
+	 * accelerometer but unfortunately ACPI does not provide any other
1246
+	 * information (like I2C address).
1247
+	 */
1248
+	found = false;
1249
+	acpi_get_devices(NULL, check_acpi_smo88xx_device, NULL,
1250
+			 (void **)&found);
1251
+
1252
+	return found;
1253
+}
1254
+
1255
+/*
1256
+ * Accelerometer's I2C address is not specified in DMI nor ACPI,
1257
+ * so it is needed to define mapping table based on DMI product names.
1258
+ */
1259
+static const struct {
1260
+	const char *dmi_product_name;
1261
+	unsigned short i2c_addr;
1262
+} dell_lis3lv02d_devices[] = {
1263
+	/*
1264
+	 * Dell platform team told us that these Latitude devices have
1265
+	 * ST microelectronics accelerometer at I2C address 0x29.
1266
+	 */
1267
+	{ "Latitude E5250",     0x29 },
1268
+	{ "Latitude E5450",     0x29 },
1269
+	{ "Latitude E5550",     0x29 },
1270
+	{ "Latitude E6440",     0x29 },
1271
+	{ "Latitude E6440 ATG", 0x29 },
1272
+	{ "Latitude E6540",     0x29 },
1273
+	/*
1274
+	 * Additional individual entries were added after verification.
1275
+	 */
1276
+	{ "Latitude 5480",      0x29 },
1277
+	{ "Vostro V131",        0x1d },
1278
+	{ "Vostro 5568",        0x29 },
1279
+};
1280
+
1281
+static void register_dell_lis3lv02d_i2c_device(struct i801_priv *priv)
1282
+{
1283
+	struct i2c_board_info info;
1284
+	const char *dmi_product_name;
1285
+	int i;
1286
+
1287
+	dmi_product_name = dmi_get_system_info(DMI_PRODUCT_NAME);
1288
+	for (i = 0; i < ARRAY_SIZE(dell_lis3lv02d_devices); ++i) {
1289
+		if (strcmp(dmi_product_name,
1290
+			   dell_lis3lv02d_devices[i].dmi_product_name) == 0)
1291
+			break;
1292
+	}
1293
+
1294
+	if (i == ARRAY_SIZE(dell_lis3lv02d_devices)) {
1295
+		dev_warn(&priv->pci_dev->dev,
1296
+			 "Accelerometer lis3lv02d is present on SMBus but its"
1297
+			 " address is unknown, skipping registration\n");
1298
+		return;
1299
+	}
1300
+
1301
+	memset(&info, 0, sizeof(struct i2c_board_info));
1302
+	info.addr = dell_lis3lv02d_devices[i].i2c_addr;
1303
+	strlcpy(info.type, "lis3lv02d", I2C_NAME_SIZE);
1304
+	i2c_new_client_device(&priv->adapter, &info);
1305
+}
1306
+
11381307 /* Register optional slaves */
11391308 static void i801_probe_optional_slaves(struct i801_priv *priv)
11401309 {
....@@ -1148,11 +1317,20 @@
11481317 		memset(&info, 0, sizeof(struct i2c_board_info));
11491318 		info.addr = apanel_addr;
11501319 		strlcpy(info.type, "fujitsu_apanel", I2C_NAME_SIZE);
1151
-		i2c_new_device(&priv->adapter, &info);
1320
+		i2c_new_client_device(&priv->adapter, &info);
11521321 	}
11531322 
11541323 	if (dmi_name_in_vendors("FUJITSU"))
11551324 		dmi_walk(dmi_check_onboard_devices, &priv->adapter);
1325
+
1326
+	if (is_dell_system_with_lis3lv02d())
1327
+		register_dell_lis3lv02d_i2c_device(priv);
1328
+
1329
+	/* Instantiate SPD EEPROMs unless the SMBus is multiplexed */
1330
+#if IS_ENABLED(CONFIG_I2C_MUX_GPIO)
1331
+	if (!priv->mux_drvdata)
1332
+#endif
1333
+		i2c_register_spd(&priv->adapter);
11561334 }
11571335 #else
11581336 static void __init input_apanel_init(void) {}
....@@ -1251,7 +1429,8 @@
12511429 	struct device *dev = &priv->adapter.dev;
12521430 	const struct i801_mux_config *mux_config;
12531431 	struct i2c_mux_gpio_platform_data gpio_data;
1254
-	int err;
1432
+	struct gpiod_lookup_table *lookup;
1433
+	int err, i;
12551434 
12561435 	if (!priv->mux_drvdata)
12571436 		return 0;
....@@ -1263,17 +1442,36 @@
12631442 	gpio_data.values = mux_config->values;
12641443 	gpio_data.n_values = mux_config->n_values;
12651444 	gpio_data.classes = mux_config->classes;
1266
-	gpio_data.gpio_chip = mux_config->gpio_chip;
1267
-	gpio_data.gpios = mux_config->gpios;
1268
-	gpio_data.n_gpios = mux_config->n_gpios;
12691445 	gpio_data.idle = I2C_MUX_GPIO_NO_IDLE;
12701446 
1271
-	/* Register the mux device */
1447
+	/* Register GPIO descriptor lookup table */
1448
+	lookup = devm_kzalloc(dev,
1449
+			      struct_size(lookup, table, mux_config->n_gpios + 1),
1450
+			      GFP_KERNEL);
1451
+	if (!lookup)
1452
+		return -ENOMEM;
1453
+	lookup->dev_id = "i2c-mux-gpio";
1454
+	for (i = 0; i < mux_config->n_gpios; i++) {
1455
+		lookup->table[i] = (struct gpiod_lookup)
1456
+			GPIO_LOOKUP(mux_config->gpio_chip,
1457
+				    mux_config->gpios[i], "mux", 0);
1458
+	}
1459
+	gpiod_add_lookup_table(lookup);
1460
+	priv->lookup = lookup;
1461
+
1462
+	/*
1463
+	 * Register the mux device, we use PLATFORM_DEVID_NONE here
1464
+	 * because since we are referring to the GPIO chip by name we are
1465
+	 * anyways in deep trouble if there is more than one of these
1466
+	 * devices, and there should likely only be one platform controller
1467
+	 * hub.
1468
+	 */
12721469 	priv->mux_pdev = platform_device_register_data(dev, "i2c-mux-gpio",
1273
-				PLATFORM_DEVID_AUTO, &gpio_data,
1470
+				PLATFORM_DEVID_NONE, &gpio_data,
12741471 				sizeof(struct i2c_mux_gpio_platform_data));
12751472 	if (IS_ERR(priv->mux_pdev)) {
12761473 		err = PTR_ERR(priv->mux_pdev);
1474
+		gpiod_remove_lookup_table(lookup);
12771475 		priv->mux_pdev = NULL;
12781476 		dev_err(dev, "Failed to register i2c-mux-gpio device\n");
12791477 		return err;
....@@ -1286,6 +1484,8 @@
12861484 {
12871485 	if (priv->mux_pdev)
12881486 		platform_device_unregister(priv->mux_pdev);
1487
+	if (priv->lookup)
1488
+		gpiod_remove_lookup_table(priv->lookup);
12891489 }
12901490 
12911491 static unsigned int i801_get_adapter_class(struct i801_priv *priv)
....@@ -1318,56 +1518,22 @@
13181518 }
13191519 #endif
13201520 
1321
-static const struct itco_wdt_platform_data tco_platform_data = {
1521
+static const struct itco_wdt_platform_data spt_tco_platform_data = {
13221522 	.name = "Intel PCH",
13231523 	.version = 4,
13241524 };
13251525 
13261526 static DEFINE_SPINLOCK(p2sb_spinlock);
13271527 
1328
-static void i801_add_tco(struct i801_priv *priv)
1528
+static struct platform_device *
1529
+i801_add_tco_spt(struct i801_priv *priv, struct pci_dev *pci_dev,
1530
+		 struct resource *tco_res)
13291531 {
1330
-	struct pci_dev *pci_dev = priv->pci_dev;
1331
-	struct resource tco_res[3], *res;
1332
-	struct platform_device *pdev;
1532
+	struct resource *res;
13331533 	unsigned int devfn;
1334
-	u32 tco_base, tco_ctl;
1335
-	u32 base_addr, ctrl_val;
13361534 	u64 base64_addr;
1535
+	u32 base_addr;
13371536 	u8 hidden;
1338
-
1339
-	if (!(priv->features & FEATURE_TCO))
1340
-		return;
1341
-
1342
-	pci_read_config_dword(pci_dev, TCOBASE, &tco_base);
1343
-	pci_read_config_dword(pci_dev, TCOCTL, &tco_ctl);
1344
-	if (!(tco_ctl & TCOCTL_EN))
1345
-		return;
1346
-
1347
-	memset(tco_res, 0, sizeof(tco_res));
1348
-
1349
-	res = &tco_res[ICH_RES_IO_TCO];
1350
-	res->start = tco_base & ~1;
1351
-	res->end = res->start + 32 - 1;
1352
-	res->flags = IORESOURCE_IO;
1353
-
1354
-	/*
1355
-	 * Power Management registers.
1356
-	 */
1357
-	devfn = PCI_DEVFN(PCI_SLOT(pci_dev->devfn), 2);
1358
-	pci_bus_read_config_dword(pci_dev->bus, devfn, ACPIBASE, &base_addr);
1359
-
1360
-	res = &tco_res[ICH_RES_IO_SMI];
1361
-	res->start = (base_addr & ~1) + ACPIBASE_SMI_OFF;
1362
-	res->end = res->start + 3;
1363
-	res->flags = IORESOURCE_IO;
1364
-
1365
-	/*
1366
-	 * Enable the ACPI I/O space.
1367
-	 */
1368
-	pci_bus_read_config_dword(pci_dev->bus, devfn, ACPICTRL, &ctrl_val);
1369
-	ctrl_val |= ACPICTRL_EN;
1370
-	pci_bus_write_config_dword(pci_dev->bus, devfn, ACPICTRL, ctrl_val);
13711537 
13721538 	/*
13731539 	 * We must access the NO_REBOOT bit over the Primary to Sideband
....@@ -1395,7 +1561,7 @@
13951561 		pci_bus_write_config_byte(pci_dev->bus, devfn, 0xe1, hidden);
13961562 	spin_unlock(&p2sb_spinlock);
13971563 
1398
-	res = &tco_res[ICH_RES_MEM_OFF];
1564
+	res = &tco_res[1];
13991565 	if (pci_dev->device == PCI_DEVICE_ID_INTEL_DNV_SMBUS)
14001566 		res->start = (resource_size_t)base64_addr + SBREG_SMBCTRL_DNV;
14011567 	else
....@@ -1404,15 +1570,60 @@
14041570 	res->end = res->start + 3;
14051571 	res->flags = IORESOURCE_MEM;
14061572 
1407
-	pdev = platform_device_register_resndata(&pci_dev->dev, "iTCO_wdt", -1,
1408
-						 tco_res, 3, &tco_platform_data,
1409
-						 sizeof(tco_platform_data));
1410
-	if (IS_ERR(pdev)) {
1411
-		dev_warn(&pci_dev->dev, "failed to create iTCO device\n");
1412
-		return;
1413
-	}
1573
+	return platform_device_register_resndata(&pci_dev->dev, "iTCO_wdt", -1,
1574
+					tco_res, 2, &spt_tco_platform_data,
1575
+					sizeof(spt_tco_platform_data));
1576
+}
14141577 
1415
-	priv->tco_pdev = pdev;
1578
+static const struct itco_wdt_platform_data cnl_tco_platform_data = {
1579
+	.name = "Intel PCH",
1580
+	.version = 6,
1581
+};
1582
+
1583
+static struct platform_device *
1584
+i801_add_tco_cnl(struct i801_priv *priv, struct pci_dev *pci_dev,
1585
+		 struct resource *tco_res)
1586
+{
1587
+	return platform_device_register_resndata(&pci_dev->dev,
1588
+			"iTCO_wdt", -1, tco_res, 1, &cnl_tco_platform_data,
1589
+			sizeof(cnl_tco_platform_data));
1590
+}
1591
+
1592
+static void i801_add_tco(struct i801_priv *priv)
1593
+{
1594
+	struct pci_dev *pci_dev = priv->pci_dev;
1595
+	struct resource tco_res[2], *res;
1596
+	u32 tco_base, tco_ctl;
1597
+
1598
+	/* If we have ACPI based watchdog use that instead */
1599
+	if (acpi_has_watchdog())
1600
+		return;
1601
+
1602
+	if (!(priv->features & (FEATURE_TCO_SPT | FEATURE_TCO_CNL)))
1603
+		return;
1604
+
1605
+	pci_read_config_dword(pci_dev, TCOBASE, &tco_base);
1606
+	pci_read_config_dword(pci_dev, TCOCTL, &tco_ctl);
1607
+	if (!(tco_ctl & TCOCTL_EN))
1608
+		return;
1609
+
1610
+	memset(tco_res, 0, sizeof(tco_res));
1611
+	/*
1612
+	 * Always populate the main iTCO IO resource here. The second entry
1613
+	 * for NO_REBOOT MMIO is filled by the SPT specific function.
1614
+	 */
1615
+	res = &tco_res[0];
1616
+	res->start = tco_base & ~1;
1617
+	res->end = res->start + 32 - 1;
1618
+	res->flags = IORESOURCE_IO;
1619
+
1620
+	if (priv->features & FEATURE_TCO_CNL)
1621
+		priv->tco_pdev = i801_add_tco_cnl(priv, pci_dev, tco_res);
1622
+	else
1623
+		priv->tco_pdev = i801_add_tco_spt(priv, pci_dev, tco_res);
1624
+
1625
+	if (IS_ERR(priv->tco_pdev))
1626
+		dev_warn(&pci_dev->dev, "failed to create iTCO device\n");
14161627 }
14171628 
14181629 #ifdef CONFIG_ACPI
....@@ -1532,22 +1743,38 @@
15321743 	switch (dev->device) {
15331744 	case PCI_DEVICE_ID_INTEL_SUNRISEPOINT_H_SMBUS:
15341745 	case PCI_DEVICE_ID_INTEL_SUNRISEPOINT_LP_SMBUS:
1535
-	case PCI_DEVICE_ID_INTEL_CANNONLAKE_H_SMBUS:
1536
-	case PCI_DEVICE_ID_INTEL_CANNONLAKE_LP_SMBUS:
15371746 	case PCI_DEVICE_ID_INTEL_LEWISBURG_SMBUS:
15381747 	case PCI_DEVICE_ID_INTEL_LEWISBURG_SSKU_SMBUS:
1539
-	case PCI_DEVICE_ID_INTEL_CDF_SMBUS:
15401748 	case PCI_DEVICE_ID_INTEL_DNV_SMBUS:
15411749 	case PCI_DEVICE_ID_INTEL_KABYLAKE_PCH_H_SMBUS:
1542
-	case PCI_DEVICE_ID_INTEL_ICELAKE_LP_SMBUS:
1543
-	case PCI_DEVICE_ID_INTEL_COMETLAKE_SMBUS:
1750
+	case PCI_DEVICE_ID_INTEL_COMETLAKE_V_SMBUS:
1751
+		priv->features |= FEATURE_BLOCK_PROC;
15441752 		priv->features |= FEATURE_I2C_BLOCK_READ;
15451753 		priv->features |= FEATURE_IRQ;
15461754 		priv->features |= FEATURE_SMBUS_PEC;
15471755 		priv->features |= FEATURE_BLOCK_BUFFER;
1548
-		/* If we have ACPI based watchdog use that instead */
1549
-		if (!acpi_has_watchdog())
1550
-			priv->features |= FEATURE_TCO;
1756
+		priv->features |= FEATURE_TCO_SPT;
1757
+		priv->features |= FEATURE_HOST_NOTIFY;
1758
+		break;
1759
+
1760
+	case PCI_DEVICE_ID_INTEL_CANNONLAKE_H_SMBUS:
1761
+	case PCI_DEVICE_ID_INTEL_CANNONLAKE_LP_SMBUS:
1762
+	case PCI_DEVICE_ID_INTEL_CDF_SMBUS:
1763
+	case PCI_DEVICE_ID_INTEL_ICELAKE_LP_SMBUS:
1764
+	case PCI_DEVICE_ID_INTEL_COMETLAKE_SMBUS:
1765
+	case PCI_DEVICE_ID_INTEL_COMETLAKE_H_SMBUS:
1766
+	case PCI_DEVICE_ID_INTEL_ELKHART_LAKE_SMBUS:
1767
+	case PCI_DEVICE_ID_INTEL_TIGERLAKE_LP_SMBUS:
1768
+	case PCI_DEVICE_ID_INTEL_TIGERLAKE_H_SMBUS:
1769
+	case PCI_DEVICE_ID_INTEL_JASPER_LAKE_SMBUS:
1770
+	case PCI_DEVICE_ID_INTEL_EBG_SMBUS:
1771
+	case PCI_DEVICE_ID_INTEL_ALDER_LAKE_S_SMBUS:
1772
+		priv->features |= FEATURE_BLOCK_PROC;
1773
+		priv->features |= FEATURE_I2C_BLOCK_READ;
1774
+		priv->features |= FEATURE_IRQ;
1775
+		priv->features |= FEATURE_SMBUS_PEC;
1776
+		priv->features |= FEATURE_BLOCK_BUFFER;
1777
+		priv->features |= FEATURE_TCO_CNL;
15511778 		priv->features |= FEATURE_HOST_NOTIFY;
15521779 		break;
15531780 
....@@ -1558,18 +1785,19 @@
15581785 	case PCI_DEVICE_ID_INTEL_WELLSBURG_SMBUS_MS1:
15591786 	case PCI_DEVICE_ID_INTEL_WELLSBURG_SMBUS_MS2:
15601787 		priv->features |= FEATURE_IDF;
1561
-		/* fall through */
1788
+		fallthrough;
15621789 	default:
1790
+		priv->features |= FEATURE_BLOCK_PROC;
15631791 		priv->features |= FEATURE_I2C_BLOCK_READ;
15641792 		priv->features |= FEATURE_IRQ;
1565
-		/* fall through */
1793
+		fallthrough;
15661794 	case PCI_DEVICE_ID_INTEL_82801DB_3:
15671795 		priv->features |= FEATURE_SMBUS_PEC;
15681796 		priv->features |= FEATURE_BLOCK_BUFFER;
1569
-		/* fall through */
1797
+		fallthrough;
15701798 	case PCI_DEVICE_ID_INTEL_82801CA_3:
15711799 		priv->features |= FEATURE_HOST_NOTIFY;
1572
-		/* fall through */
1800
+		fallthrough;
15731801 	case PCI_DEVICE_ID_INTEL_82801BA_2:
15741802 	case PCI_DEVICE_ID_INTEL_82801AB_3:
15751803 	case PCI_DEVICE_ID_INTEL_82801AA_3:
....@@ -1691,7 +1919,7 @@
16911919 
16921920 	pci_set_drvdata(dev, priv);
16931921 
1694
-	dev_pm_set_driver_flags(&dev->dev, DPM_FLAG_NEVER_SKIP);
1922
+	dev_pm_set_driver_flags(&dev->dev, DPM_FLAG_NO_DIRECT_COMPLETE);
16951923 	pm_runtime_set_autosuspend_delay(&dev->dev, 1000);
16961924 	pm_runtime_use_autosuspend(&dev->dev);
16971925 	pm_runtime_put_autosuspend(&dev->dev);
....@@ -1733,17 +1961,15 @@
17331961 #ifdef CONFIG_PM_SLEEP
17341962 static int i801_suspend(struct device *dev)
17351963 {
1736
-	struct pci_dev *pci_dev = to_pci_dev(dev);
1737
-	struct i801_priv *priv = pci_get_drvdata(pci_dev);
1964
+	struct i801_priv *priv = dev_get_drvdata(dev);
17381965 
1739
-	pci_write_config_byte(pci_dev, SMBHSTCFG, priv->original_hstcfg);
1966
+	pci_write_config_byte(priv->pci_dev, SMBHSTCFG, priv->original_hstcfg);
17401967 	return 0;
17411968 }
17421969 
17431970 static int i801_resume(struct device *dev)
17441971 {
1745
-	struct pci_dev *pci_dev = to_pci_dev(dev);
1746
-	struct i801_priv *priv = pci_get_drvdata(pci_dev);
1972
+	struct i801_priv *priv = dev_get_drvdata(dev);
17471973 
17481974 	i801_setup_hstcfg(priv);
17491975 	i801_enable_host_notify(&priv->adapter);
....@@ -1777,7 +2003,8 @@
17772003 	pci_unregister_driver(&i801_driver);
17782004 }
17792005 
1780
-MODULE_AUTHOR("Mark D. Studebaker <mdsxyz123@yahoo.com>, Jean Delvare <jdelvare@suse.de>");
2006
+MODULE_AUTHOR("Mark D. Studebaker <mdsxyz123@yahoo.com>");
2007
+MODULE_AUTHOR("Jean Delvare <jdelvare@suse.de>");
17812008 MODULE_DESCRIPTION("I801 SMBus driver");
17822009 MODULE_LICENSE("GPL");
17832010