~hc/RK356X_SDK_RELEASE.git

..	..	@@ -3,67 +3,85 @@
3	3	Contact: benjamin.gaignard@st.com
4	4	Description:
5	5	Reading returns the list possible master modes which are:
6		- - "reset" : The UG bit from the TIMx_EGR register is
	6	+
	7	+
	8	+ - "reset"
	9	+ The UG bit from the TIMx_EGR register is
7	10	used as trigger output (TRGO).
8		- - "enable" : The Counter Enable signal CNT_EN is used
	11	+ - "enable"
	12	+ The Counter Enable signal CNT_EN is used
9	13	as trigger output.
10		- - "update" : The update event is selected as trigger output.
	14	+ - "update"
	15	+ The update event is selected as trigger output.
11	16	For instance a master timer can then be used
12	17	as a prescaler for a slave timer.
13		- - "compare_pulse" : The trigger output send a positive pulse
14		- when the CC1IF flag is to be set.
15		- - "OC1REF" : OC1REF signal is used as trigger output.
16		- - "OC2REF" : OC2REF signal is used as trigger output.
17		- - "OC3REF" : OC3REF signal is used as trigger output.
18		- - "OC4REF" : OC4REF signal is used as trigger output.
	18	+ - "compare_pulse"
	19	+ The trigger output send a positive pulse
	20	+ when the CC1IF flag is to be set.
	21	+ - "OC1REF"
	22	+ OC1REF signal is used as trigger output.
	23	+ - "OC2REF"
	24	+ OC2REF signal is used as trigger output.
	25	+ - "OC3REF"
	26	+ OC3REF signal is used as trigger output.
	27	+ - "OC4REF"
	28	+ OC4REF signal is used as trigger output.
	29	+
19	30	Additional modes (on TRGO2 only):
20		- - "OC5REF" : OC5REF signal is used as trigger output.
21		- - "OC6REF" : OC6REF signal is used as trigger output.
	31	+
	32	+ - "OC5REF"
	33	+ OC5REF signal is used as trigger output.
	34	+ - "OC6REF"
	35	+ OC6REF signal is used as trigger output.
22	36	- "compare_pulse_OC4REF":
23		- OC4REF rising or falling edges generate pulses.
	37	+ OC4REF rising or falling edges generate pulses.
24	38	- "compare_pulse_OC6REF":
25		- OC6REF rising or falling edges generate pulses.
	39	+ OC6REF rising or falling edges generate pulses.
26	40	- "compare_pulse_OC4REF_r_or_OC6REF_r":
27		- OC4REF or OC6REF rising edges generate pulses.
	41	+ OC4REF or OC6REF rising edges generate pulses.
28	42	- "compare_pulse_OC4REF_r_or_OC6REF_f":
29		- OC4REF rising or OC6REF falling edges generate pulses.
	43	+ OC4REF rising or OC6REF falling edges generate
	44	+ pulses.
30	45	- "compare_pulse_OC5REF_r_or_OC6REF_r":
31		- OC5REF or OC6REF rising edges generate pulses.
	46	+ OC5REF or OC6REF rising edges generate pulses.
32	47	- "compare_pulse_OC5REF_r_or_OC6REF_f":
33		- OC5REF rising or OC6REF falling edges generate pulses.
	48	+ OC5REF rising or OC6REF falling edges generate
	49	+ pulses.
34	50
35		- +-----------+ +-------------+ +---------+
36		- \| Prescaler +-> \| Counter \| +-> \| Master \| TRGO(2)
37		- +-----------+ +--+--------+-+ \|-> \| Control +-->
38		- \| \| \|\| +---------+
39		- +--v--------+-+ OCxREF \|\| +---------+
40		- \| Chx compare +----------> \| Output \| ChX
41		- +-----------+-+ \| \| Control +-->
42		- . \| \| +---------+
43		- . \| \| .
44		- +-----------v-+ OC6REF \| .
45		- \| Ch6 compare +---------+>
46		- +-------------+
	51	+ ::
47	52
48		- Example with: "compare_pulse_OC4REF_r_or_OC6REF_r":
	53	+ +-----------+ +-------------+ +---------+
	54	+ \| Prescaler +-> \| Counter \| +-> \| Master \| TRGO(2)
	55	+ +-----------+ +--+--------+-+ \|-> \| Control +-->
	56	+ \| \| \|\| +---------+
	57	+ +--v--------+-+ OCxREF \|\| +---------+
	58	+ \| Chx compare +----------> \| Output \| ChX
	59	+ +-----------+-+ \| \| Control +-->
	60	+ . \| \| +---------+
	61	+ . \| \| .
	62	+ +-----------v-+ OC6REF \| .
	63	+ \| Ch6 compare +---------+>
	64	+ +-------------+
49	65
50		- X
51		- X X
52		- X . . X
53		- X . . X
54		- X . . X
55		- count X . . . . X
56		- . . . .
57		- . . . .
58		- +---------------+
59		- OC4REF \| . . \|
60		- +-+ . . +-+
61		- . +---+ .
62		- OC6REF . \| \| .
63		- +-------+ +-------+
64		- +-+ +-+
65		- TRGO2 \| \| \| \|
66		- +-+ +---+ +---------+
	66	+ Example with: "compare_pulse_OC4REF_r_or_OC6REF_r"::
	67	+
	68	+ X
	69	+ X X
	70	+ X . . X
	71	+ X . . X
	72	+ X . . X
	73	+ count X . . . . X
	74	+ . . . .
	75	+ . . . .
	76	+ +---------------+
	77	+ OC4REF \| . . \|
	78	+ +-+ . . +-+
	79	+ . +---+ .
	80	+ OC6REF . \| \| .
	81	+ +-------+ +-------+
	82	+ +-+ +-+
	83	+ TRGO2 \| \| \| \|
	84	+ +-+ +---+ +---------+
67	85
68	86	What: /sys/bus/iio/devices/triggerX/master_mode
69	87	KernelVersion: 4.11
..	..	@@ -91,29 +109,6 @@
91	109	When counting down the counter start from preset value
92	110	and fire event when reach 0.
93	111
94		-What: /sys/bus/iio/devices/iio:deviceX/in_count_quadrature_mode_available
95		-KernelVersion: 4.12
96		-Contact: benjamin.gaignard@st.com
97		-Description:
98		- Reading returns the list possible quadrature modes.
99		-
100		-What: /sys/bus/iio/devices/iio:deviceX/in_count0_quadrature_mode
101		-KernelVersion: 4.12
102		-Contact: benjamin.gaignard@st.com
103		-Description:
104		- Configure the device counter quadrature modes:
105		- channel_A:
106		- Encoder A input servers as the count input and B as
107		- the UP/DOWN direction control input.
108		-
109		- channel_B:
110		- Encoder B input serves as the count input and A as
111		- the UP/DOWN direction control input.
112		-
113		- quadrature:
114		- Encoder A and B inputs are mixed to get direction
115		- and count with a scale of 0.25.
116		-
117	112	What: /sys/bus/iio/devices/iio:deviceX/in_count_enable_mode_available
118	113	KernelVersion: 4.12
119	114	Contact: benjamin.gaignard@st.com
..	..	@@ -127,6 +122,7 @@
127	122	Configure the device counter enable modes, in all case
128	123	counting direction is set by in_count0_count_direction
129	124	attribute and the counter is clocked by the internal clock.
	125	+
130	126	always:
131	127	Counter is always ON.
132	128