forked from ~ljy/RK356X_SDK_RELEASE

hc
2024-09-20 a36159eec6ca17402b0e146b86efaf76568dc353
kernel/arch/arm64/boot/dts/rockchip/NK-R36S0.dtsi
....@@ -8,6 +8,7 @@
88
99 #include <dt-bindings/gpio/gpio.h>
1010 #include <dt-bindings/pinctrl/rockchip.h>
11
+#include <dt-bindings/display/media-bus-format.h>
1112 #include "rk3568.dtsi"
1213 #include "rk3568-evb.dtsi"
1314
....@@ -17,7 +18,8 @@
1718
1819 rk_headset: rk-headset {
1920 compatible = "rockchip_headset";
20
- headset_gpio = <&gpio3 RK_PC2 GPIO_ACTIVE_LOW>;
21
+ headset_gpio = <&gpio0 RK_PD5 GPIO_ACTIVE_LOW>;
22
+ spk_ctl_gpio = <&gpio4 RK_PC2 GPIO_ACTIVE_LOW>;//AMP_SD_GPIO4_C2_3V3
2123 pinctrl-names = "default";
2224 pinctrl-0 = <&hp_det>;
2325 };
....@@ -32,15 +34,6 @@
3234 vin-supply = <&vcc3v3_sys>;
3335 };
3436
35
- vcc3v3_vga: vcc3v3-vga {
36
- compatible = "regulator-fixed";
37
- regulator-name = "vcc3v3_vga";
38
- regulator-always-on;
39
- regulator-boot-on;
40
- gpio = <&gpio0 RK_PD5 GPIO_ACTIVE_HIGH>;
41
- enable-active-high;
42
- vin-supply = <&vcc3v3_sys>;
43
- };
4437
4538 pcie30_avdd0v9: pcie30-avdd0v9 {
4639 compatible = "regulator-fixed";
....@@ -67,7 +60,9 @@
6760 regulator-name = "vcc3v3_pcie";
6861 regulator-min-microvolt = <3300000>;
6962 regulator-max-microvolt = <3300000>;
63
+ regulator-always-on;
7064 enable-active-high;
65
+ regulator-boot-on;
7166 gpio = <&gpio0 RK_PD4 GPIO_ACTIVE_HIGH>;
7267 startup-delay-us = <5000>;
7368 vin-supply = <&dc_12v>;
....@@ -95,37 +90,193 @@
9590 };
9691 #endif
9792
93
+ leds: leds {
94
+ compatible = "gpio-leds";
95
+ sig_led: sig_led {
96
+ gpios = <&gpio4 RK_PC4 GPIO_ACTIVE_HIGH>;
97
+ default-state = "on";
98
+ };
99
+ };
100
+
101
+ leds: leds {
102
+ compatible = "gpio-leds";
103
+ err_led: err_led {
104
+ gpios = <&gpio4 RK_PD2 GPIO_ACTIVE_HIGH>;
105
+ default-state = "on";
106
+ };
107
+ };
108
+
109
+
110
+ ndj_io_init {
111
+ compatible = "nk_io_control";
112
+ pinctrl-names = "default";
113
+ pinctrl-0 = <&nk_io_gpio>;
114
+
115
+ //gpio_op0 = <&gpio1 RK_PD0 GPIO_ACTIVE_HIGH>;
116
+
117
+ vcc_5v {
118
+ gpio_num = <&gpio1 RK_PA4 GPIO_ACTIVE_HIGH>; //VCC5_IO_EN_GPIO1_A4_3V3
119
+ gpio_function = <0>;
120
+ };
121
+
122
+ vcc_12v {
123
+ gpio_num = <&gpio0 RK_PC7 GPIO_ACTIVE_HIGH>; //VCC12_IO_EN_GPIO0_C7_3V3
124
+ gpio_function = <0>;
125
+ };
126
+
127
+ vcc_3.3v {
128
+ gpio_num = <&gpio0 RK_PC4 GPIO_ACTIVE_HIGH>; //VCC3_IO_EN_GPIO0_C4_3V3
129
+ gpio_function = <0>;
130
+ };
131
+
132
+ ax88772_rst {
133
+ gpio_num = <&gpio3 RK_PB5 GPIO_ACTIVE_HIGH>; //AX88772_RST_GPIO3_B5_3V3
134
+ gpio_function = <3>;
135
+ };
136
+
137
+ ax88631_rst {
138
+ gpio_num = <&gpio3 RK_PB6 GPIO_ACTIVE_HIGH>; //AX88772_RST_GPIO3_B6_3V3
139
+ gpio_function = <3>;
140
+ };
141
+
142
+ hub_host3 {
143
+ gpio_num = <&gpio4 RK_PB2 GPIO_ACTIVE_HIGH>; //HOST3_EN_GPIO4_B2_1V8
144
+ gpio_function = <0>;
145
+ };
146
+
147
+ wake_4g {
148
+ gpio_num = <&gpio1 RK_PB1 GPIO_ACTIVE_LOW>; //4G_WAKEUP_GPIO01_B1_3V3
149
+ gpio_function = <0>;
150
+ };
151
+
152
+ air_mode_4g {
153
+ gpio_num = <&gpio1 RK_PB0 GPIO_ACTIVE_LOW>; //4G_AIR_MODE_GPIO01_B0_3V3
154
+ gpio_function = <0>;
155
+ };
156
+
157
+ reset_4g {
158
+ gpio_num = <&gpio1 RK_PB2 GPIO_ACTIVE_LOW>; //4G_RST_GPIO01_B2_3V3
159
+ gpio_function = <3>;
160
+ };
161
+
162
+ en_4g {
163
+ gpio_num = <&gpio0 RK_PC6 GPIO_ACTIVE_HIGH>; //4G_PWREN_H_GPIO0_C6
164
+ gpio_function = <0>;
165
+ };
166
+
167
+ //gpio99 {
168
+ // gpio_num = <&gpio3 RK_PA3 GPIO_ACTIVE_LOW>;//HP_EN_GPIO3_A6_3V3
169
+ // gpio_function = <1>;
170
+ //};
171
+
172
+ wifi_power_en {
173
+ gpio_num = <&gpio3 RK_PC6 GPIO_ACTIVE_HIGH>; //WIFI_PWREN_GPIO3_C6_1V8
174
+ gpio_function = <0>;
175
+ };
176
+ #if 0
177
+ do1 {
178
+ gpio_num = <&gpio1 RK_PD0 GPIO_ACTIVE_LOW>;
179
+ gpio_function = <0>;
180
+ };
181
+
182
+ do2 {
183
+ gpio_num = <&gpio1 RK_PD2 GPIO_ACTIVE_HIGH>;
184
+ gpio_function = <0>;
185
+ };
186
+
187
+ do3 {
188
+ gpio_num = <&gpio1 RK_PD1 GPIO_ACTIVE_HIGH>;
189
+ gpio_function = <0>;
190
+ };
191
+
192
+ do4 {
193
+ gpio_num = <&gpio1 RK_PD3 GPIO_ACTIVE_HIGH>;
194
+ gpio_function = <0>;
195
+ };
196
+
197
+ do5 {
198
+ gpio_num = <&gpio2 RK_PD6 GPIO_ACTIVE_LOW>;
199
+ gpio_function = <0>;
200
+ };
201
+
202
+ do6 {
203
+ gpio_num = <&gpio2 RK_PD7 GPIO_ACTIVE_LOW>;
204
+ gpio_function = <0>;
205
+ };
206
+
207
+ do7 {
208
+ gpio_num = <&gpio3 RK_PA0 GPIO_ACTIVE_LOW>;
209
+ gpio_function = <0>;
210
+ };
211
+
212
+ di1 {
213
+ gpio_num = <&gpio2 RK_PD5 GPIO_ACTIVE_HIGH>;
214
+ gpio_function = <1>;
215
+ };
216
+ #endif
217
+ };
218
+#if 0
98219 nk_io_init {
99220 compatible = "nk_io_control";
100
- usb_en_oc_gpio = <&gpio0 RK_PA5 GPIO_ACTIVE_HIGH>; //USB_EN_OC_GPIO0_A5
101
- lcd_bk_en_gpio = <&gpio0 RK_PB0 GPIO_ACTIVE_HIGH>; //LCD0_BKLT_EN_3V3
102
- lcd_pwblk_gpio = <&gpio0 RK_PB7 GPIO_ACTIVE_HIGH>; //LCD0_BKLT_EN_3V3
103
- vcc3_io_en_gpio = <&gpio0 RK_PC4 GPIO_ACTIVE_HIGH>; //VCC3_IO_EN_GPIO0_C4_3V3
221
+// vcc3_io_en_gpio = <&gpio0 RK_PC4 GPIO_ACTIVE_HIGH>; //VCC3_IO_EN_GPIO0_C4_3V3
104222 hub_host2_5V_rest_gpio = <&gpio4 RK_PD2 GPIO_ACTIVE_HIGH>; //HUB_RST_GPIO4_D2_3V3
105223 hub_host3_5v_gpio = <&gpio4 RK_PB2 GPIO_ACTIVE_HIGH>; //HOST3_EN_GPIO4_B2_1V8
106
-// hub_host3_5V_rest_gpio = <&gpio0 RK_PB6 GPIO_ACTIVE_HIGH>;
107224 vcc_5v_io = <&gpio1 RK_PA4 GPIO_ACTIVE_HIGH>; //VCC5_IO_EN_GPIO1_A4_3V3
108225 vcc_12v_io = <&gpio0 RK_PC7 GPIO_ACTIVE_HIGH>; //VCC12_IO_EN_GPIO0_C7_3V3
109226 en_4g_gpio = <&gpio0 RK_PC6 GPIO_ACTIVE_HIGH>; //4G_PWREN_H_GPIO0_C6
110227 reset_4g_gpio = <&gpio1 RK_PB2 GPIO_ACTIVE_HIGH>; //4G_RST_GPIO01_B2_3V3
111228 air_mode_4g_gpio = <&gpio1 RK_PB0 GPIO_ACTIVE_HIGH>; //4G_AIR_MODE_GPIO01_B0_3V3
112229 wake_4g_gpio = <&gpio1 RK_PB1 GPIO_ACTIVE_HIGH>; //4G_WAKEUP_GPIO01_B1_3V3
113
-
114
- edp_enable_gpio = <&gpio0 RK_PC4 GPIO_ACTIVE_HIGH>;
115
- edp_gpio0 = <&gpio3 RK_PD2 GPIO_ACTIVE_LOW>; //7511_GPIO0-GPIO3_D2
116
- edp_gpio1 = <&gpio3 RK_PD3 GPIO_ACTIVE_LOW>; //7511_GPIO1-GPIO3_D3
117
- edp_gpio2 = <&gpio3 RK_PD4 GPIO_ACTIVE_LOW>; //7511_GPIO2-GPIO3_D4
118
- edp_gpio3 = <&gpio3 RK_PD5 GPIO_ACTIVE_LOW>; //7511_GPIO3-GPIO3_D5
119
- edp_reset = <&gpio3 RK_PD1 GPIO_ACTIVE_LOW>; //7511_RST_GPIO3_D1
120
-// tp_reset = <&gpio3 RK_PA7 GPIO_ACTIVE_HIGH>;
121
-// vddio_mipi = <&gpio1 RK_PA4 GPIO_ACTIVE_HIGH>;
122
-
230
+ hp_en_gpio = <&gpio3 RK_PA6 GPIO_ACTIVE_HIGH>;//HP_EN_GPIO3_A6_3V3
231
+// spk_out_gpio = <&gpio4 RK_PC2 GPIO_ACTIVE_HIGH>;//AMP_SD_GPIO4_C2_3V3
123232 wifi_power_en_gpio = <&gpio3 RK_PC6 GPIO_ACTIVE_HIGH>; //WIFI_PWREN_GPIO3_C6_1V8
124
-
233
+// pcie_power_en_gpio = <&gpio0 RK_PD4 GPIO_ACTIVE_HIGH>;//PCIE_PWREN_H_GPIO0_D4
125234 pinctrl-names = "default";
126
- pinctrl-0 = <&nk_io_gpio>;
127
- nodka_lvds = <9>;
235
+ pinctrl-0 = <&nk_io_gpio>;
128236 };
237
+#endif
238
+ panel: panel {
239
+ compatible = "simple-panel";
240
+ backlight = <&backlight>;
241
+ power-supply = <&vcc3v3_lcd0_n>;
242
+ enable-gpios = <&gpio2 RK_PD4 GPIO_ACTIVE_HIGH>; //LCD0_VDD_H_GPIO2_D4
243
+ reset-gpios = <&gpio3 RK_PD1 GPIO_ACTIVE_LOW>; //7511_RST_GPIO3_D1
244
+ edp-bl-gpios = <&gpio0 RK_PB7 GPIO_ACTIVE_HIGH>; //LCD0_BKLT_EN_3V3
245
+ edp-bl-en = <&gpio0 RK_PB0 GPIO_ACTIVE_HIGH>; //LCD0_BKLT_EN_3V3
246
+ bus-format = <MEDIA_BUS_FMT_RGB888_1X24>;
247
+ bpc = <8>;
248
+ prepare-delay-ms = <200>;
249
+ enable-delay-ms = <20>;
250
+ lvds-gpio0 = <&gpio3 RK_PD2 GPIO_ACTIVE_HIGH>; //7511_GPIO0-GPIO3_D2
251
+ lvds-gpio1 = <&gpio3 RK_PD3 GPIO_ACTIVE_HIGH>; //7511_GPIO1-GPIO3_D3
252
+ lvds-gpio2 = <&gpio3 RK_PD4 GPIO_ACTIVE_HIGH>; //7511_GPIO2-GPIO3_D4
253
+ lvds-gpio3 = <&gpio3 RK_PD5 GPIO_ACTIVE_HIGH>; //7511_GPIO3-GPIO3_D5
254
+ nodka-lvds = <15>;
255
+
256
+ display-timings {
257
+ native-mode = <&timing>;
258
+ timing: timing {
259
+ clock-frequency = <72500000>;
260
+ hactive = <1280>;
261
+ vactive = <800>;
262
+ hfront-porch = <70>;
263
+ hsync-len = <2>;
264
+ hback-porch = <88>;
265
+ vfront-porch = <7>;
266
+ vsync-len = <4>;
267
+ vback-porch = <17>;
268
+ hsync-active = <21>;
269
+ vsync-active = <0>;
270
+ de-active = <0>;
271
+ pixelclk-active = <0>;
272
+ };
273
+ };
274
+ ports {
275
+ panel_in_lvds: endpoint {
276
+ remote-endpoint = <&lvds_out>;
277
+ };
278
+ };
279
+ };
129280 };
130281
131282 &combphy0_us {
....@@ -141,11 +292,11 @@
141292 };
142293
143294 &csi2_dphy_hw {
144
- status = "okay";
295
+ status = "disabled";
145296 };
146297
147298 &csi2_dphy0 {
148
- status = "okay";
299
+ status = "disabled";
149300
150301 ports {
151302 #address-cells = <1>;
....@@ -188,8 +339,12 @@
188339 * video_phy0 needs to be enabled
189340 * when dsi0 is enabled
190341 */
342
+&video_phy0 {
343
+ status = "disabled";
344
+};
345
+
191346 &dsi0 {
192
- status = "okay";
347
+ status = "disabled";
193348 };
194349
195350 &dsi0_in_vp0 {
....@@ -197,7 +352,7 @@
197352 };
198353
199354 &dsi0_in_vp1 {
200
- status = "okay";
355
+ status = "disabled";
201356 };
202357
203358 &dsi0_panel {
....@@ -208,6 +363,10 @@
208363 * video_phy1 needs to be enabled
209364 * when dsi1 is enabled
210365 */
366
+
367
+&video_phy1 {
368
+ status = "disabled";
369
+};
211370 &dsi1 {
212371 status = "disabled";
213372 };
....@@ -221,31 +380,117 @@
221380 };
222381
223382 &dsi1_panel {
224
- power-supply = <&vcc3v3_lcd1_n>;
383
+// power-supply = <&vcc3v3_lcd1_n>; //MIPI_3V3EN_GPIO3_A3_d_3V3
384
+ vddio-mipi = <&gpio3 RK_PA4 GPIO_ACTIVE_HIGH>; //MIPI_EN_1V8_GPIO3_A4_d_3V3
385
+ reset-gpios = <&gpio3 RK_PC7 GPIO_ACTIVE_LOW>; //MIPI_RST_L_GPIO3_C7
386
+ vcc-5v-gpio = <&gpio1 RK_PA4 GPIO_ACTIVE_HIGH>; //VCC5_IO_EN_GPIO1_A4_3V3
387
+ pinctrl-names = "default";
388
+ pinctrl-0 = <&lcd1_rst_gpio>;
225389 };
226390
391
+&route_dsi1 {
392
+ status = "disabled";
393
+ connect = <&vp1_out_dsi1>;
394
+};
395
+
396
+
397
+/*
398
+* edp_start
399
+*/
400
+
227401 &edp {
228
- hpd-gpios = <&gpio0 RK_PC2 GPIO_ACTIVE_HIGH>;
229
- status = "okay";
402
+ force-hpd;
403
+ status = "disabled";
230404 };
231405
232406 &edp_phy {
233
- status = "okay";
407
+ status = "disabled";
234408 };
235409
236410 &edp_in_vp0 {
237
- status = "okay";
411
+ status = "disabled";
238412 };
239413
240414 &edp_in_vp1 {
415
+ status = "disabled";
416
+
417
+};
418
+
419
+&route_edp {
420
+ status = "disabled";
421
+ connect = <&vp1_out_edp>;
422
+};
423
+
424
+&route_edp {
241425 status = "disabled";
242426 };
427
+
428
+&lvds {
429
+ status = "disabled";
430
+ ports {
431
+ port@1 {
432
+ reg = <1>;
433
+ lvds_out:endpoint {
434
+ remote-endpoint = <&panel_in_lvds>;
435
+ };
436
+ };
437
+ };
438
+};
439
+
440
+&route_lvds{
441
+ status = "okay";
442
+ connect = <&vp1_out_lvds>;
443
+};
444
+
445
+&lvds_in_vp1 {
446
+ status = "disabled";
447
+};
448
+
449
+/*
450
+* edp_end
451
+*/
452
+
453
+/*
454
+* Hdmi_start
455
+*/
456
+
457
+&hdmi {
458
+ status = "okay";
459
+ rockchip,phy-table =
460
+ <92812500 0x8009 0x0000 0x0270>,
461
+ <165000000 0x800b 0x0000 0x026d>,
462
+ <185625000 0x800b 0x0000 0x01ed>,
463
+ <297000000 0x800b 0x0000 0x01ad>,
464
+ <594000000 0x8029 0x0000 0x0088>,
465
+ <000000000 0x0000 0x0000 0x0000>;
466
+};
467
+
468
+&route_hdmi {
469
+ status = "okay";
470
+ connect = <&vp0_out_hdmi>;
471
+};
472
+
473
+&hdmi_in_vp0 {
474
+ status = "okay";
475
+};
476
+
477
+&hdmi_in_vp1 {
478
+ status = "disabled";
479
+};
480
+
481
+&hdmi_sound {
482
+ status = "okay";
483
+};
484
+
485
+/*
486
+ * Hdmi_END
487
+*/
243488
244489 &gmac0 {
245490 phy-mode = "rgmii";
246491 clock_in_out = "output";
247492
248
- snps,reset-gpio = <&gpio2 RK_PD3 GPIO_ACTIVE_LOW>;
493
+ snps,reset-gpio = <&gpio2 RK_PC6 GPIO_ACTIVE_LOW>;
249494 snps,reset-active-low;
250495 /* Reset time is 20ms, 100ms for rtl8211f */
251496 snps,reset-delays-us = <0 20000 100000>;
....@@ -265,7 +510,9 @@
265510 rx_delay = <0x2f>;
266511
267512 phy-handle = <&rgmii_phy0>;
513
+
268514 status = "disabled";
515
+
269516 };
270517
271518 &gmac1 {
....@@ -299,9 +546,7 @@
299546 * power-supply should switche to vcc3v3_lcd1_n
300547 * when mipi panel is connected to dsi1.
301548 */
302
-&gt1x {
303
- power-supply = <&vcc3v3_lcd0_n>;
304
-};
549
+
305550
306551 &i2c3 {
307552 status = "okay";
....@@ -317,13 +562,10 @@
317562 compatible = "nk_mcu";
318563 reg = <0x15>;
319564 };
320
-
321
-
322
-
323565 };
324566
325567 &i2c4 {
326
- status = "okay";
568
+ status = "disabled";
327569 gc8034: gc8034@37 {
328570 compatible = "galaxycore,gc8034";
329571 status = "okay";
....@@ -335,7 +577,6 @@
335577 reset-gpios = <&gpio3 RK_PB6 GPIO_ACTIVE_LOW>;
336578 pwdn-gpios = <&gpio4 RK_PB4 GPIO_ACTIVE_LOW>;
337579 rockchip,grf = <&grf>;
338
- power-domains = <&power RK3568_PD_VI>;
339580 rockchip,camera-module-index = <0>;
340581 rockchip,camera-module-facing = "back";
341582 rockchip,camera-module-name = "RK-CMK-8M-2-v1";
....@@ -369,7 +610,7 @@
369610 };
370611 };
371612 ov5695: ov5695@36 {
372
- status = "okay";
613
+ status = "disabled";
373614 compatible = "ovti,ov5695";
374615 reg = <0x36>;
375616 clocks = <&cru CLK_CIF_OUT>;
....@@ -392,6 +633,19 @@
392633 };
393634 };
394635
636
+&i2c5 {
637
+ status = "okay";
638
+
639
+ hym8563: hym8563@51 {
640
+ compatible = "haoyu,hym8563";
641
+ reg = <0x51>;
642
+ #clock-cells = <0>;
643
+ clock-frequency = <32768>;
644
+ clock-output-names = "xin32k";
645
+ /* rtc_int is not connected */
646
+ };
647
+};
648
+
395649 &mdio0 {
396650 rgmii_phy0: phy@0 {
397651 compatible = "ethernet-phy-ieee802.3-c22";
....@@ -406,20 +660,14 @@
406660 };
407661 };
408662
409
-&video_phy0 {
410
- status = "okay";
411
-};
412663
413
-&video_phy1 {
664
+
665
+&pcie30phy {
414666 status = "disabled";
415667 };
416668
417
-&pcie30phy {
418
- status = "okay";
419
-};
420
-
421
-&pcie3x2 {
422
- reset-gpios = <&gpio2 RK_PD6 GPIO_ACTIVE_HIGH>;
669
+&pcie2x1 {
670
+ reset-gpios = <&gpio3 RK_PC1 GPIO_ACTIVE_HIGH>;
423671 vpcie3v3-supply = <&vcc3v3_pcie>;
424672 status = "okay";
425673 };
....@@ -434,7 +682,8 @@
434682 // };
435683 headphone {
436684 hp_det: hp-det {
437
- rockchip,pins = <3 RK_PC2 RK_FUNC_GPIO &pcfg_pull_down>;
685
+ rockchip,pins = <0 RK_PD5 RK_FUNC_GPIO &pcfg_pull_down>,
686
+ <4 RK_PC2 RK_FUNC_GPIO &pcfg_pull_down>;
438687 };
439688 };
440689
....@@ -449,23 +698,60 @@
449698 rockchip,pins = <2 RK_PB5 RK_FUNC_GPIO &pcfg_pull_none>;
450699 };
451700 };
701
+
702
+ lcd1 {
703
+ lcd1_rst_gpio: lcd1-rst-gpio {
704
+ rockchip,pins = <3 RK_PC7 RK_FUNC_GPIO &pcfg_pull_none>;
705
+ };
706
+ };
707
+
452708 nk_io_init{
453709 nk_io_gpio: nk-io-gpio{
454
- rockchip,pins = <0 RK_PC6 RK_FUNC_GPIO &pcfg_pull_up>;
710
+ rockchip,pins = <0 RK_PB0 RK_FUNC_GPIO &pcfg_pull_none>,
711
+ <0 RK_PB7 RK_FUNC_GPIO &pcfg_pull_none>,
712
+ <0 RK_PC4 RK_FUNC_GPIO &pcfg_pull_none>,
713
+ <4 RK_PD2 RK_FUNC_GPIO &pcfg_pull_none>,
714
+ <4 RK_PB2 RK_FUNC_GPIO &pcfg_pull_none>,
715
+ <1 RK_PA4 RK_FUNC_GPIO &pcfg_pull_none>,
716
+ <0 RK_PC7 RK_FUNC_GPIO &pcfg_pull_none>,
717
+ <1 RK_PB2 RK_FUNC_GPIO &pcfg_pull_none>,
718
+ <1 RK_PB0 RK_FUNC_GPIO &pcfg_pull_none>,
719
+ <1 RK_PB1 RK_FUNC_GPIO &pcfg_pull_none>,
720
+ <3 RK_PA6 RK_FUNC_GPIO &pcfg_pull_none>,
721
+ <3 RK_PD2 RK_FUNC_GPIO &pcfg_pull_none>,
722
+ <3 RK_PD3 RK_FUNC_GPIO &pcfg_pull_none>,
723
+ <3 RK_PD4 RK_FUNC_GPIO &pcfg_pull_none>,
724
+ <3 RK_PD5 RK_FUNC_GPIO &pcfg_pull_none>,
725
+ <3 RK_PA4 RK_FUNC_GPIO &pcfg_pull_none>,
726
+ <3 RK_PA6 RK_FUNC_GPIO &pcfg_pull_none>,
727
+ <3 RK_PB5 RK_FUNC_GPIO &pcfg_pull_none>,
728
+ <3 RK_PD1 RK_FUNC_GPIO &pcfg_pull_none>,
729
+ <0 RK_PB0 RK_FUNC_GPIO &pcfg_pull_none>,//GPIO0_B0_u_3V3 DO1 8
730
+ <0 RK_PB3 RK_FUNC_GPIO &pcfg_pull_none>,//GPIO0_B3_u_3V3 DO2 11
731
+ <0 RK_PB4 RK_FUNC_GPIO &pcfg_pull_none>,//GPIO0_B4_u_3V3 DO3 12
732
+ <0 RK_PB5 RK_FUNC_GPIO &pcfg_pull_none>,//GPIO0_B5_u_3V3 DO4 13
733
+ <0 RK_PB6 RK_FUNC_GPIO &pcfg_pull_none>,//GPIO0_B6_u_3V3 DO5 14
734
+
735
+ <0 RK_PC0 RK_FUNC_GPIO &pcfg_pull_none>,//GPIO0_C0_d_3V3 DI1 16
736
+ <0 RK_PC1 RK_FUNC_GPIO &pcfg_pull_none>,//GPIO0_C1_d_3V3 DI2 17
737
+ <0 RK_PC2 RK_FUNC_GPIO &pcfg_pull_none>,//GPIO0_C2_d_3V3 DI3 18
738
+ <0 RK_PC3 RK_FUNC_GPIO &pcfg_pull_none>,//GPIO0_C3_d_3V3 DI4 19
739
+ <0 RK_PC5 RK_FUNC_GPIO &pcfg_pull_none>,//GPIO0_C5_d_3V3 DI5 21
740
+ <0 RK_PC6 RK_FUNC_GPIO &pcfg_pull_none>;
455741 };
456742 };
457743 };
458744
459745 &rkisp {
460
- status = "okay";
746
+ status = "disabled";
461747 };
462748
463749 &rkisp_mmu {
464
- status = "okay";
750
+ status = "disabled";
465751 };
466752
467753 &rkisp_vir0 {
468
- status = "okay";
754
+ status = "disabled";
469755
470756 port {
471757 #address-cells = <1>;
....@@ -478,15 +764,7 @@
478764 };
479765 };
480766
481
-&route_dsi0 {
482
- status = "okay";
483
- connect = <&vp1_out_dsi0>;
484
-};
485767
486
-&route_edp {
487
- status = "okay";
488
- connect = <&vp0_out_edp>;
489
-};
490768
491769 &sata2 {
492770 status = "okay";
....@@ -524,15 +802,6 @@
524802 pinctrl-0 = <&uart8m0_xfer &uart8m0_ctsn>;
525803 };
526804
527
-&vcc3v3_lcd0_n {
528
- gpio = <&gpio2 RK_PD4 GPIO_ACTIVE_HIGH>;
529
- enable-active-high;
530
-};
531
-
532
-&vcc3v3_lcd1_n {
533
- gpio = <&gpio0 RK_PC5 GPIO_ACTIVE_HIGH>;
534
- enable-active-high;
535
-};
536805
537806 &wireless_wlan {
538807 pinctrl-names = "default";
....@@ -546,18 +815,23 @@
546815 clock-names = "ext_clock";
547816 //wifi-bt-power-toggle;
548817 uart_rts_gpios = <&gpio2 RK_PB5 GPIO_ACTIVE_LOW>;
549
- BT,power_gpio = <&gpio2 RK_PB7 GPIO_ACTIVE_HIGH>;
550818 pinctrl-names = "default", "rts_gpio";
551819 pinctrl-0 = <&uart1m0_rtsn>;
552820 pinctrl-1 = <&uart1_gpios>;
553
- BT,reset_gpio = <&gpio3 RK_PA0 GPIO_ACTIVE_HIGH>;
554
- BT,wake_gpio = <&gpio3 RK_PA2 GPIO_ACTIVE_HIGH>;
555
- BT,wake_host_irq = <&gpio3 RK_PA1 GPIO_ACTIVE_HIGH>;
821
+ BT,reset_gpio = <&gpio2 RK_PB7 GPIO_ACTIVE_HIGH>;
822
+ BT,wake_gpio = <&gpio2 RK_PC0 GPIO_ACTIVE_HIGH>;
823
+ BT,wake_host_irq = <&gpio2 RK_PC1 GPIO_ACTIVE_HIGH>;
556824 status = "disabled";
557825 };
558826
559827 &uart0 {
560
- status = "okay";
828
+ status = "disabled";
829
+};
830
+
831
+&uart1 {
832
+ pinctrl-names = "default";
833
+ pinctrl-0 = <&uart1m0_xfer &uart1m0_ctsn>;
834
+ status = "disabled";
561835 };
562836
563837 &uart3 {
....@@ -566,7 +840,7 @@
566840 };
567841
568842 &uart4 {
569
- status = "okay";
843
+ status = "disabled";
570844 pinctrl-0 = <&uart4m1_xfer>;
571845 };
572846
....@@ -575,12 +849,18 @@
575849 pinctrl-0 = <&uart5m1_xfer>;
576850 };
577851
852
+
578853 &uart7 {
579854 status = "okay";
580855 pinctrl-0 = <&uart7m1_xfer>;
581856 };
582857
858
+&uart8 {
859
+ status = "disabled";
860
+ pinctrl-0 = <&uart8m1_xfer>;
861
+};
862
+
583863 &uart9 {
584
- status = "okay";
864
+ status = "disabled";
585865 pinctrl-0 = <&uart9m1_xfer>;
586866 };