modify sin led gpio

hc

2024-05-13 9d77db3c730780c8ef5ccd4b66403ff5675cfe4e

 kernel/drivers/mfd/rk630.c
..
..
@@ -41,7 +41,7 @@
41
41
 		dev_err(rk630->dev, "Could not write to CRU: %d\n", ret);
42
42
 		return ret;
43
43
 	}
44
-	usleep_range(20, 30);
44
+	udelay(20);
45
45
 
46
46
 	val = BIT(12 + 16);
47
47
 	ret = regmap_write(rk630->cru, CRU_REG(0x50), val);
..
..
@@ -49,7 +49,7 @@
49
49
 		dev_err(rk630->dev, "Could not write to CRU: %d\n", ret);
50
50
 		return ret;
51
51
 	}
52
-	usleep_range(20, 30);
52
+	udelay(20);
53
53
 
54
54
 	/* power up && led*/
55
55
 	val = BIT(1 + 16) | BIT(1) | BIT(2 + 16);
..
..
@@ -113,14 +113,6 @@
113
113
 
114
114
 static const struct mfd_cell rk630_devs[] = {
115
115
 	{
116
-		.name = "rk630-efuse",
117
-		.of_compatible = "rockchip,rk630-efuse",
118
-	},
119
-	{
120
-		.name = "rk630-pinctrl",
121
-		.of_compatible = "rockchip,rk630-pinctrl",
122
-	},
123
-	{
124
116
 		.name = "rk630-tve",
125
117
 		.of_compatible = "rockchip,rk630-tve",
126
118
 	},
..
..
@@ -131,10 +123,6 @@
131
123
 	{
132
124
 		.name = "rk630-macphy",
133
125
 		.of_compatible = "rockchip,rk630-macphy",
134
-	},
135
-	{
136
-		.name = "rk630-codec",
137
-		.of_compatible = "rockchip,rk630-codec",
138
126
 	},
139
127
 };
140
128
 
..
..
@@ -170,27 +158,6 @@
170
158
 };
171
159
 EXPORT_SYMBOL_GPL(rk630_grf_regmap_config);
172
160
 
173
-static const struct regmap_range rk630_pinctrl_readable_ranges[] = {
174
-	regmap_reg_range(GPIO0_BASE, GPIO0_BASE + GPIO_VER_ID),
175
-	regmap_reg_range(GPIO1_BASE, GPIO1_BASE + GPIO_VER_ID),
176
-};
177
-
178
-static const struct regmap_access_table rk630_pinctrl_readable_table = {
179
-	.yes_ranges = rk630_pinctrl_readable_ranges,
180
-	.n_yes_ranges = ARRAY_SIZE(rk630_pinctrl_readable_ranges),
181
-};
182
-
183
-const struct regmap_config rk630_pinctrl_regmap_config = {
184
-	.name = "pinctrl",
185
-	.reg_bits = 32,
186
-	.val_bits = 32,
187
-	.reg_stride = 4,
188
-	.max_register = GPIO_MAX_REGISTER,
189
-	.reg_format_endian = REGMAP_ENDIAN_NATIVE,
190
-	.val_format_endian = REGMAP_ENDIAN_NATIVE,
191
-	.rd_table = &rk630_pinctrl_readable_table,
192
-};
193
-
194
161
 static const struct regmap_range rk630_cru_readable_ranges[] = {
195
162
 	regmap_reg_range(CRU_SPLL_CON0, CRU_SPLL_CON2),
196
163
 	regmap_reg_range(CRU_MODE_CON, CRU_MODE_CON),
..
..
@@ -214,6 +181,7 @@
214
181
 	.val_format_endian = REGMAP_ENDIAN_NATIVE,
215
182
 	.rd_table = &rk630_cru_readable_table,
216
183
 };
184
+EXPORT_SYMBOL_GPL(rk630_cru_regmap_config);
217
185
 
218
186
 static const struct regmap_range rk630_rtc_readable_ranges[] = {
219
187
 	regmap_reg_range(RTC_SET_SECONDS, RTC_CNT_3),
..
..
@@ -234,29 +202,36 @@
234
202
 	.val_format_endian = REGMAP_ENDIAN_NATIVE,
235
203
 	.rd_table = &rk630_rtc_readable_table,
236
204
 };
205
+EXPORT_SYMBOL_GPL(rk630_rtc_regmap_config);
237
206
 
238
207
 int rk630_core_probe(struct rk630 *rk630)
239
208
 {
240
209
 	bool macphy_enabled = false;
210
+	struct clk *ref_clk;
241
211
 	struct device_node *np;
242
212
 	unsigned long rate;
243
213
 	int ret;
244
214
 
245
-	rk630->ref_clk = devm_clk_get(rk630->dev, "ref");
246
-	if (IS_ERR(rk630->ref_clk)) {
247
-		dev_err(rk630->dev, "failed to get ref clk source\n");
248
-		return PTR_ERR(rk630->ref_clk);
215
+	if (!rk630->irq) {
216
+		dev_err(rk630->dev, "No interrupt support, no core IRQ\n");
217
+		return -EINVAL;
249
218
 	}
250
219
 
251
-	ret = clk_prepare_enable(rk630->ref_clk);
220
+	ref_clk = devm_clk_get(rk630->dev, "ref");
221
+	if (IS_ERR(ref_clk)) {
222
+		dev_err(rk630->dev, "failed to get ref clk source\n");
223
+		return PTR_ERR(ref_clk);
224
+	}
225
+
226
+	ret = clk_prepare_enable(ref_clk);
252
227
 	if (ret < 0) {
253
228
 		dev_err(rk630->dev, "failed to enable ref clk - %d\n", ret);
254
229
 		return ret;
255
230
 	}
256
-	rate = clk_get_rate(rk630->ref_clk);
231
+	rate = clk_get_rate(ref_clk);
257
232
 
258
233
 	ret = devm_add_action_or_reset(rk630->dev, (void (*) (void *))clk_disable_unprepare,
259
-				       rk630->ref_clk);
234
+				       ref_clk);
260
235
 	if (ret)
261
236
 		return ret;
262
237
 
..
..
@@ -273,11 +248,10 @@
273
248
 	usleep_range(50000, 60000);
274
249
 	gpiod_direction_output(rk630->reset_gpio, 0);
275
250
 
276
-	if (!rk630->irq) {
277
-		dev_err(rk630->dev, "No interrupt support, no core IRQ\n");
278
-		return -EINVAL;
279
-	}
280
-
251
+	/**
252
+	 * If rtc output clamp is enabled, rtc regs can't be accessed,
253
+	 * RK630 irq add will failed.
254
+	 */
281
255
 	regmap_update_bits(rk630->grf, PLUMAGE_GRF_SOC_CON0,
282
256
 			   RTC_CLAMP_EN_MASK, RTC_CLAMP_EN(1));
283
257