forked from ~ljy/RK356X_SDK_RELEASE
blame | history | patch | commit | commitdiff
hc
2024-05-13 9d77db3c730780c8ef5ccd4b66403ff5675cfe4e 
 kernel/Documentation/devicetree/bindings/nvmem/nvmem.txt
....@@ -1,80 +1 @@
1
-= NVMEM(Non Volatile Memory) Data Device Tree Bindings =
2
-
3
-This binding is intended to represent the location of hardware
4
-configuration data stored in NVMEMs like eeprom, efuses and so on.
5
-
6
-On a significant proportion of boards, the manufacturer has stored
7
-some data on NVMEM, for the OS to be able to retrieve these information
8
-and act upon it. Obviously, the OS has to know about where to retrieve
9
-these data from, and where they are stored on the storage device.
10
-
11
-This document is here to document this.
12
-
13
-= Data providers =
14
-Contains bindings specific to provider drivers and data cells as children
15
-of this node.
16
-
17
-Optional properties:
18
- read-only: Mark the provider as read only.
19
-
20
-= Data cells =
21
-These are the child nodes of the provider which contain data cell
22
-information like offset and size in nvmem provider.
23
-
24
-Required properties:
25
-reg:	specifies the offset in byte within the storage device.
26
-
27
-Optional properties:
28
-
29
-bits:	Is pair of bit location and number of bits, which specifies offset
30
-	in bit and number of bits within the address range specified by reg property.
31
-	Offset takes values from 0-7.
32
-
33
-For example:
34
-
35
-	/* Provider */
36
-	qfprom: qfprom@700000 {
37
-		...
38
-
39
-		/* Data cells */
40
-		tsens_calibration: calib@404 {
41
-			reg = <0x404 0x10>;
42
-		};
43
-
44
-		tsens_calibration_bckp: calib_bckp@504 {
45
-			reg = <0x504 0x11>;
46
-			bits = <6 128>
47
-		};
48
-
49
-		pvs_version: pvs-version@6 {
50
-			reg = <0x6 0x2>
51
-			bits = <7 2>
52
-		};
53
-
54
-		speed_bin: speed-bin@c{
55
-			reg = <0xc 0x1>;
56
-			bits = <2 3>;
57
-
58
-		};
59
-		...
60
-	};
61
-
62
-= Data consumers =
63
-Are device nodes which consume nvmem data cells/providers.
64
-
65
-Required-properties:
66
-nvmem-cells: list of phandle to the nvmem data cells.
67
-nvmem-cell-names: names for the each nvmem-cells specified. Required if
68
-	nvmem-cells is used.
69
-
70
-Optional-properties:
71
-nvmem	: list of phandles to nvmem providers.
72
-nvmem-names: names for the each nvmem provider. required if nvmem is used.
73
-
74
-For example:
75
-
76
-	tsens {
77
-		...
78
-		nvmem-cells = <&tsens_calibration>;
79
-		nvmem-cell-names = "calibration";
80
-	};
1
+This file has been moved to nvmem.yaml and nvmem-consumer.yaml.