forked from ~ljy/RK356X_SDK_RELEASE
blame | history | patch | commit | commitdiff
hc
2024-05-13 9d77db3c730780c8ef5ccd4b66403ff5675cfe4e 
 kernel/Documentation/devicetree/bindings/media/i2c/tvp5150.txt
....@@ -5,38 +5,150 @@
55 with discrete syncs or 8-bit ITU-R BT.656 with embedded syncs output formats.
66 
77 Required Properties:
8
-- compatible: value must be "ti,tvp5150"
9
-- reg: I2C slave address
8
+====================
9
+- compatible:	Value must be "ti,tvp5150".
10
+- reg:		I2C slave address.
1011 
1112 Optional Properties:
12
-- pdn-gpios: phandle for the GPIO connected to the PDN pin, if any.
13
-- reset-gpios: phandle for the GPIO connected to the RESETB pin, if any.
13
+====================
14
+- pdn-gpios:	Phandle for the GPIO connected to the PDN pin, if any.
15
+- reset-gpios:	Phandle for the GPIO connected to the RESETB pin, if any.
1416 
15
-The device node must contain one 'port' child node for its digital output
16
-video port, in accordance with the video interface bindings defined in
17
-Documentation/devicetree/bindings/media/video-interfaces.txt.
17
+The device node must contain one 'port' child node per device physical input
18
+and output port, in accordance with the video interface bindings defined in
19
+Documentation/devicetree/bindings/media/video-interfaces.txt. The port nodes
20
+are numbered as follows
1821 
19
-Required Endpoint Properties for parallel synchronization:
22
+	  Name		Type		Port
23
+	--------------------------------------
24
+	  AIP1A		sink		0
25
+	  AIP1B		sink		1
26
+	  Y-OUT		src		2
2027 
21
-- hsync-active: active state of the HSYNC signal. Must be <1> (HIGH).
22
-- vsync-active: active state of the VSYNC signal. Must be <1> (HIGH).
23
-- field-even-active: field signal level during the even field data
24
-  transmission. Must be <0>.
28
+The device node must contain at least one sink port and the src port. Each input
29
+port must be linked to an endpoint defined in [1]. The port/connector layout is
30
+as follows
2531 
26
-If none of hsync-active, vsync-active and field-even-active is specified,
27
-the endpoint is assumed to use embedded BT.656 synchronization.
32
+tvp-5150 port@0 (AIP1A)
33
+	endpoint@0 -----------> Comp0-Con  port
34
+	endpoint@1 ------+----> Svideo-Con port
35
+tvp-5150 port@1 (AIP1B)  |
36
+	endpoint@1 ------+
37
+	endpoint@0 -----------> Comp1-Con  port
38
+tvp-5150 port@2
39
+	endpoint (video bitstream output at YOUT[0-7] parallel bus)
2840 
29
-Example:
41
+Required Endpoint Properties for parallel synchronization on output port:
42
+=========================================================================
43
+
44
+- hsync-active:		Active state of the HSYNC signal. Must be <1> (HIGH).
45
+- vsync-active:		Active state of the VSYNC signal. Must be <1> (HIGH).
46
+- field-even-active:	Field signal level during the even field data
47
+			transmission. Must be <0>.
48
+
49
+Note: Do not specify any of these properties if you want to use the embedded
50
+      BT.656 synchronization.
51
+
52
+Optional Connector Properties:
53
+==============================
54
+
55
+- sdtv-standards: Set the possible signals to which the hardware tries to lock
56
+                  instead of using the autodetection mechnism. Please look at
57
+                  [1] for more information.
58
+
59
+[1] Documentation/devicetree/bindings/display/connector/analog-tv-connector.yaml.
60
+
61
+Example - three input sources:
62
+#include <dt-bindings/display/sdtv-standards.h>
63
+
64
+comp_connector_0 {
65
+	compatible = "composite-video-connector";
66
+	label = "Composite0";
67
+	sdtv-standards = <SDTV_STD_PAL_M>; /* limit to pal-m signals */
68
+
69
+	port {
70
+		composite0_to_tvp5150: endpoint {
71
+			remote-endpoint = <&tvp5150_to_composite0>;
72
+		};
73
+	};
74
+};
75
+
76
+comp_connector_1 {
77
+	compatible = "composite-video-connector";
78
+	label = "Composite1";
79
+	sdtv-standards = <SDTV_STD_NTSC_M>; /* limit to ntsc-m signals */
80
+
81
+	port {
82
+		composite1_to_tvp5150: endpoint {
83
+			remote-endpoint = <&tvp5150_to_composite1>;
84
+		};
85
+	};
86
+};
87
+
88
+svideo_connector {
89
+	compatible = "svideo-connector";
90
+	label = "S-Video";
91
+
92
+	port {
93
+		#address-cells = <1>;
94
+		#size-cells = <0>;
95
+
96
+		svideo_luma_to_tvp5150: endpoint@0 {
97
+			reg = <0>;
98
+			remote-endpoint = <&tvp5150_to_svideo_luma>;
99
+		};
100
+
101
+		svideo_chroma_to_tvp5150: endpoint@1 {
102
+			reg = <1>;
103
+			remote-endpoint = <&tvp5150_to_svideo_chroma>;
104
+		};
105
+	};
106
+};
30107 
31108 &i2c2 {
32
-	...
33109 	tvp5150@5c {
34110 		compatible = "ti,tvp5150";
35111 		reg = <0x5c>;
36112 		pdn-gpios = <&gpio4 30 GPIO_ACTIVE_LOW>;
37113 		reset-gpios = <&gpio6 7 GPIO_ACTIVE_LOW>;
114
+		#address-cells = <1>;
115
+		#size-cells = <0>;
38116 
39
-		port {
117
+		port@0 {
118
+			#address-cells = <1>;
119
+			#size-cells = <0>;
120
+			reg = <0>;
121
+
122
+			tvp5150_to_composite0: endpoint@0 {
123
+				reg = <0>;
124
+				remote-endpoint = <&composite0_to_tvp5150>;
125
+			};
126
+
127
+			tvp5150_to_svideo_luma: endpoint@1 {
128
+				reg = <1>;
129
+				remote-endpoint = <&svideo_luma_to_tvp5150>;
130
+			};
131
+		};
132
+
133
+		port@1 {
134
+			#address-cells = <1>;
135
+			#size-cells = <0>;
136
+			reg = <1>;
137
+
138
+			tvp5150_to_composite1: endpoint@0 {
139
+				reg = <0>;
140
+                                remote-endpoint = <&composite1_to_tvp5150>;
141
+			};
142
+
143
+			tvp5150_to_svideo_chroma: endpoint@1 {
144
+				reg = <1>;
145
+				remote-endpoint = <&svideo_chroma_to_tvp5150>;
146
+			};
147
+		};
148
+
149
+		port@2 {
150
+			reg = <2>;
151
+
40152 			tvp5150_1: endpoint {
41153 				remote-endpoint = <&ccdc_ep>;
42154 			};