add ip1811 driver

hc

2023-11-22 9ca5fbcb63a8dcaee0527f96afb91dc4b4bd8fa9

 kernel/arch/arm64/boot/dts/rockchip/NK-R36S0.dtsi
..
..
@@ -8,19 +8,13 @@
8
8
 
9
9
 #include <dt-bindings/gpio/gpio.h>
10
10
 #include <dt-bindings/pinctrl/rockchip.h>
11
+#include <dt-bindings/display/media-bus-format.h>
11
12
 #include "rk3568.dtsi"
12
13
 #include "rk3568-evb.dtsi"
13
14
 
14
15
 / {
15
16
 	model = "Rockchip RK3568 EVB1 DDR4 V10 Board";
16
17
 	compatible = "rockchip,rk3568-evb1-ddr4-v10", "rockchip,rk3568";
17
-
18
-	rk_headset: rk-headset {
19
-		compatible = "rockchip_headset";
20
-		headset_gpio = <&gpio3 RK_PC2 GPIO_ACTIVE_LOW>;
21
-		pinctrl-names = "default";
22
-		pinctrl-0 = <&hp_det>;
23
-	};
24
18
 
25
19
 	vcc2v5_sys: vcc2v5-ddr {
26
20
 		compatible = "regulator-fixed";
..
..
@@ -92,40 +86,151 @@
92
86
 		enable-active-high;
93
87
 		regulator-always-on;
94
88
 		regulator-boot-on;
95
-    	};
89
+	};
96
90
 #endif
97
91
 
98
-	    nk_io_init {
99
-                compatible = "nk_io_control";
100
-				usb_en_oc_gpio = <&gpio0 RK_PA5 GPIO_ACTIVE_HIGH>;  //USB_EN_OC_GPIO0_A5
101
-				lcd_bk_en_gpio = <&gpio0 RK_PB0 GPIO_ACTIVE_HIGH>; //LCD0_BKLT_EN_3V3
102
-				lcd_pwblk_gpio = <&gpio0 RK_PB7 GPIO_ACTIVE_HIGH>;  //LCD0_BKLT_EN_3V3
103
-				vcc3_io_en_gpio = <&gpio0 RK_PC4 GPIO_ACTIVE_HIGH>; //VCC3_IO_EN_GPIO0_C4_3V3
104
-                hub_host2_5V_rest_gpio = <&gpio4 RK_PD2 GPIO_ACTIVE_HIGH>; //HUB_RST_GPIO4_D2_3V3
105
-                hub_host3_5v_gpio = <&gpio4 RK_PB2 GPIO_ACTIVE_HIGH>; //HOST3_EN_GPIO4_B2_1V8
106
-//              hub_host3_5V_rest_gpio = <&gpio0 RK_PB6 GPIO_ACTIVE_HIGH>; 
107
-                vcc_5v_io = <&gpio1 RK_PA4 GPIO_ACTIVE_HIGH>;   //VCC5_IO_EN_GPIO1_A4_3V3
108
-                vcc_12v_io = <&gpio0 RK_PC7 GPIO_ACTIVE_HIGH>; //VCC12_IO_EN_GPIO0_C7_3V3
109
-                en_4g_gpio = <&gpio0 RK_PC6 GPIO_ACTIVE_HIGH>; //4G_PWREN_H_GPIO0_C6
110
-                reset_4g_gpio = <&gpio1 RK_PB2 GPIO_ACTIVE_HIGH>; //4G_RST_GPIO01_B2_3V3
111
-                air_mode_4g_gpio = <&gpio1 RK_PB0 GPIO_ACTIVE_HIGH>; //4G_AIR_MODE_GPIO01_B0_3V3
112
-                wake_4g_gpio = <&gpio1 RK_PB1 GPIO_ACTIVE_HIGH>; //4G_WAKEUP_GPIO01_B1_3V3
113
-                
114
-				edp_enable_gpio = <&gpio0 RK_PC4 GPIO_ACTIVE_HIGH>;
115
-                edp_gpio0 = <&gpio3 RK_PD2 GPIO_ACTIVE_LOW>; //7511_GPIO0-GPIO3_D2
116
-				edp_gpio1 = <&gpio3 RK_PD3 GPIO_ACTIVE_LOW>; //7511_GPIO1-GPIO3_D3
117
-				edp_gpio2 = <&gpio3 RK_PD4 GPIO_ACTIVE_LOW>; //7511_GPIO2-GPIO3_D4
118
-				edp_gpio3 = <&gpio3 RK_PD5 GPIO_ACTIVE_LOW>; //7511_GPIO3-GPIO3_D5
119
-                edp_reset = <&gpio3 RK_PD1 GPIO_ACTIVE_LOW>; //7511_RST_GPIO3_D1
120
-//              tp_reset = <&gpio3 RK_PA7 GPIO_ACTIVE_HIGH>;
121
-//              vddio_mipi = <&gpio1 RK_PA4 GPIO_ACTIVE_HIGH>;
122
-		
123
-				wifi_power_en_gpio = <&gpio3 RK_PC6 GPIO_ACTIVE_HIGH>; //WIFI_PWREN_GPIO3_C6_1V8
92
+	ndj_io_init {
93
+         	compatible = "nk_io_control";	
94
+			pinctrl-names = "default";
95
+        	pinctrl-0 = <&nk_io_gpio>;
96
+			
97
+			//gpio_op0 = <&gpio1 RK_PD0 GPIO_ACTIVE_HIGH>;
98
+			
99
+			vcc_5v {
100
+				gpio_num = <&gpio1 RK_PA4 GPIO_ACTIVE_HIGH>; //VCC5_IO_EN_GPIO1_A4_3V3
101
+				gpio_function = <0>;	
102
+			};
103
+			
104
+			vcc_12v {
105
+				gpio_num = <&gpio0 RK_PC7 GPIO_ACTIVE_HIGH>;  //VCC12_IO_EN_GPIO0_C7_3V3
106
+				gpio_function = <0>;
107
+			};
108
+			
109
+			hub_host2_rst {
110
+				gpio_num = <&gpio4 RK_PD2 GPIO_ACTIVE_HIGH>;  //HUB_RST_GPIO4_D2_3V3
111
+				gpio_function = <3>;
112
+			};
113
+			
114
+			hub_host3 {
115
+				gpio_num = <&gpio4 RK_PB2 GPIO_ACTIVE_HIGH>; //HOST3_EN_GPIO4_B2_1V8
116
+				gpio_function = <0>;
117
+			};
118
+			
119
+			wake_4g {
120
+				gpio_num = <&gpio1 RK_PB1 GPIO_ACTIVE_LOW>; //4G_WAKEUP_GPIO01_B1_3V3
121
+				gpio_function = <0>;
122
+			};
123
+			
124
+			air_mode_4g {
125
+				gpio_num = <&gpio1 RK_PB0 GPIO_ACTIVE_LOW>; //4G_AIR_MODE_GPIO01_B0_3V3
126
+				gpio_function = <0>;
127
+			};
128
+			
129
+			reset_4g {
130
+				gpio_num = <&gpio1 RK_PB2 GPIO_ACTIVE_LOW>; //4G_RST_GPIO01_B2_3V3
131
+				gpio_function = <3>;
132
+			};
133
+			
134
+			en_4g {
135
+				gpio_num = <&gpio0 RK_PC6 GPIO_ACTIVE_HIGH>; //4G_PWREN_H_GPIO0_C6
136
+				gpio_function = <0>;
137
+			};
138
+			
139
+			hp_en {
140
+				gpio_num = <&gpio3 RK_PA6 GPIO_ACTIVE_HIGH>;//HP_EN_GPIO3_A6_3V3
141
+				gpio_function = <0>;
142
+			};
143
+			
144
+			usb_ogt {
145
+				gpio_num = <&gpio0 RK_PC2 GPIO_ACTIVE_HIGH>; //OTG_EN_OC_GPIO0_C2
146
+				gpio_function = <0>;
147
+			};
148
+			
149
+			m2_wifi_pwr {
150
+				gpio_num = <&gpio3 RK_PC6 GPIO_ACTIVE_HIGH>;//WIFI_PWREN_GPIO3_C6_1V8
151
+				gpio_function = <0>;
152
+			};
153
+			
154
+			 
155
+	#if 0		
156
+			do1 {
157
+				gpio_num = <&gpio1 RK_PD0 GPIO_ACTIVE_LOW>; 
158
+				gpio_function = <0>;
159
+			};
160
+			
161
+			do2 {
162
+				gpio_num = <&gpio1 RK_PD2 GPIO_ACTIVE_HIGH>;
163
+				gpio_function = <0>;
164
+			};
165
+			
166
+			do3 {
167
+				gpio_num = <&gpio1 RK_PD1 GPIO_ACTIVE_HIGH>;
168
+				gpio_function = <0>;
169
+			};
170
+			
171
+			do4 {
172
+				gpio_num = <&gpio1 RK_PD3 GPIO_ACTIVE_HIGH>;
173
+				gpio_function = <0>;
174
+			};
175
+			
176
+			do5 {
177
+				gpio_num = <&gpio2 RK_PD6 GPIO_ACTIVE_LOW>; 
178
+				gpio_function = <0>;
179
+			};
180
+			
181
+			do6 {
182
+				gpio_num = <&gpio2 RK_PD7 GPIO_ACTIVE_LOW>; 
183
+				gpio_function = <0>;
184
+			};
185
+			
186
+			do7 {
187
+				gpio_num = <&gpio3 RK_PA0 GPIO_ACTIVE_LOW>; 
188
+				gpio_function = <0>;
189
+			};
190
+			
191
+			di1 {
192
+				gpio_num = <&gpio2 RK_PD5 GPIO_ACTIVE_HIGH>;
193
+				gpio_function = <1>;
194
+			};
195
+	#endif
196
+	};
197
+	
198
+			panel: panel {
199
+				compatible = "simple-panel";
200
+				backlight = <&backlight>;
201
+				power-supply = <&vcc3v3_lcd0_n>;
202
+				enable-gpios = <&gpio2 RK_PD4 GPIO_ACTIVE_HIGH>; //LCD0_VDD_H_GPIO2_D4				
203
+				edp-bl-gpios = <&gpio0 RK_PB7 GPIO_ACTIVE_HIGH>;  //LCD0_PWBLK_H_GPIO0_B7
204
+				edp-bl-en = <&gpio0 RK_PB0 GPIO_ACTIVE_HIGH>; //LCD0_BKLT_EN_3V3
205
+				bus-format = <MEDIA_BUS_FMT_RGB888_1X24>;
206
+				bpc = <8>;
207
+				prepare-delay-ms = <200>;
208
+				enable-delay-ms = <20>;
124
209
 
125
-				pinctrl-names = "default";
126
-				pinctrl-0 = <&nk_io_gpio>;
127
-				nodka_lvds = <9>;
128
-        };
210
+				display-timings {
211
+                native-mode = <&timing>;
212
+                timing: timing {
213
+					clock-frequency = <72500000>;
214
+					hactive = <1280>;
215
+					vactive = <800>;
216
+					hfront-porch = <70>;
217
+					hsync-len = <2>;
218
+					hback-porch = <88>;
219
+					vfront-porch = <7>;
220
+					vsync-len = <4>;
221
+					vback-porch = <17>;
222
+					hsync-active = <21>;
223
+					vsync-active = <0>;
224
+					de-active = <0>;
225
+					pixelclk-active = <0>;			
226
+					};
227
+				};
228
+				ports {
229
+					panel_in_lvds: endpoint {
230
+					remote-endpoint = <&lvds_out>;
231
+						};
232
+					};   
233
+				};
129
234
 };
130
235
 
131
236
 &combphy0_us {
..
..
@@ -141,11 +246,11 @@
141
246
 };
142
247
 
143
248
 &csi2_dphy_hw {
144
-	status = "okay";
249
+	status = "disabled";
145
250
 };
146
251
 
147
252
 &csi2_dphy0 {
148
-	status = "okay";
253
+	status = "disabled";
149
254
 
150
255
 	ports {
151
256
 		#address-cells = <1>;
..
..
@@ -189,7 +294,7 @@
189
294
  * when dsi0 is enabled
190
295
  */
191
296
 &dsi0 {
192
-	status = "okay";
297
+	status = "disabled";
193
298
 };
194
299
 
195
300
 &dsi0_in_vp0 {
..
..
@@ -197,7 +302,7 @@
197
302
 };
198
303
 
199
304
 &dsi0_in_vp1 {
200
-	status = "okay";
305
+	status = "disabled";
201
306
 };
202
307
 
203
308
 &dsi0_panel {
..
..
@@ -225,7 +330,30 @@
225
330
 };
226
331
 
227
332
 &edp {
228
-	hpd-gpios = <&gpio0 RK_PC2 GPIO_ACTIVE_HIGH>;
333
+	//hpd-gpios = <&gpio0 RK_PC2 GPIO_ACTIVE_HIGH>;	
334
+    force-hpd;
335
+    status = "disabled";
336
+};
337
+
338
+&lvds {
339
+    status = "okay";
340
+    ports {
341
+        port@1 {
342
+            reg = <1>;
343
+            lvds_out: endpoint {
344
+                remote-endpoint = <&panel_in_lvds>;
345
+            };
346
+        };
347
+   
348
+	};
349
+};
350
+
351
+&route_lvds{
352
+	 status = "okay";
353
+	 connect = <&vp2_out_lvds>;
354
+};
355
+
356
+&lvds_in_vp2 {
229
357
 	status = "okay";
230
358
 };
231
359
 
..
..
@@ -234,18 +362,18 @@
234
362
 };
235
363
 
236
364
 &edp_in_vp0 {
237
-	status = "okay";
365
+	status = "disabled";
238
366
 };
239
367
 
240
368
 &edp_in_vp1 {
241
-	status = "disabled";
369
+	status = "okay";
242
370
 };
243
371
 
244
372
 &gmac0 {
245
373
 	phy-mode = "rgmii";
246
374
 	clock_in_out = "output";
247
375
 
248
-	snps,reset-gpio = <&gpio2 RK_PD3 GPIO_ACTIVE_LOW>;
376
+	snps,reset-gpio = <&gpio2 RK_PC6 GPIO_ACTIVE_LOW>;
249
377
 	snps,reset-active-low;
250
378
 	/* Reset time is 20ms, 100ms for rtl8211f */
251
379
 	snps,reset-delays-us = <0 20000 100000>;
..
..
@@ -265,7 +393,9 @@
265
393
 	rx_delay = <0x2f>;
266
394
 
267
395
 	phy-handle = <&rgmii_phy0>;
268
-	status = "disabled";
396
+	
397
+	status = "okay";
398
+	
269
399
 };
270
400
 
271
401
 &gmac1 {
..
..
@@ -299,9 +429,7 @@
299
429
  * power-supply should switche to vcc3v3_lcd1_n
300
430
  * when mipi panel is connected to dsi1.
301
431
  */
302
-&gt1x {
303
-	power-supply = <&vcc3v3_lcd0_n>;
304
-};
432
+
305
433
 
306
434
 &i2c3 {
307
435
 	status = "okay";
..
..
@@ -317,13 +445,10 @@
317
445
                 compatible = "nk_mcu";
318
446
                 reg = <0x15>;
319
447
         };
320
-
321
-
322
-
323
448
 };
324
449
 
325
450
 &i2c4 {
326
-	status = "okay";
451
+	status = "disabled";
327
452
 	gc8034: gc8034@37 {
328
453
 		compatible = "galaxycore,gc8034";
329
454
 		status = "okay";
..
..
@@ -369,7 +494,7 @@
369
494
 		};
370
495
 	};
371
496
 	ov5695: ov5695@36 {
372
-		status = "okay";
497
+		status = "disabled";
373
498
 		compatible = "ovti,ov5695";
374
499
 		reg = <0x36>;
375
500
 		clocks = <&cru CLK_CIF_OUT>;
..
..
@@ -418,20 +543,27 @@
418
543
 	status = "okay";
419
544
 };
420
545
 
546
+&pcie2x1 {
547
+	reset-gpios = <&gpio3 RK_PC1 GPIO_ACTIVE_HIGH>;
548
+	vpcie3v3-supply = <&vcc3v3_pcie>;
549
+	status = "okay";
550
+};
551
+
421
552
 &pcie3x2 {
422
-	reset-gpios = <&gpio2 RK_PD6 GPIO_ACTIVE_HIGH>;
553
+	reset-gpios = <&gpio3 RK_PA1 GPIO_ACTIVE_HIGH>;
554
+	vpcie3v3-supply = <&vcc3v3_pcie>;
555
+	status = "disabled";
556
+};
557
+
558
+&pcie3x1 {
559
+	rockchip,bifurcation;
560
+	reset-gpios = <&gpio3 RK_PA1 GPIO_ACTIVE_HIGH>;
423
561
 	vpcie3v3-supply = <&vcc3v3_pcie>;
424
562
 	status = "okay";
425
563
 };
426
564
 
427
565
 &pinctrl {
428
-//	cam {
429
-//		camera_pwr: camera-pwr {
430
-//			rockchip,pins =
431
-//				/* camera power en */
432
-//				<0 RK_PC1 RK_FUNC_GPIO &pcfg_pull_none>;
433
-//		};
434
-//	};
566
+
435
567
 	headphone {
436
568
 		hp_det: hp-det {
437
569
 			rockchip,pins = <3 RK_PC2 RK_FUNC_GPIO &pcfg_pull_down>;
..
..
@@ -440,32 +572,51 @@
440
572
 
441
573
 	wireless-wlan {
442
574
 		wifi_host_wake_irq: wifi-host-wake-irq {
443
-			rockchip,pins = <2 RK_PB2 RK_FUNC_GPIO &pcfg_pull_down>;
575
+			rockchip,pins = <3 RK_PD4 RK_FUNC_GPIO &pcfg_pull_down>;
444
576
 		};
445
577
 	};
446
-
447
-	wireless-bluetooth {
448
-		uart1_gpios: uart1-gpios {
449
-			rockchip,pins = <2 RK_PB5 RK_FUNC_GPIO &pcfg_pull_none>;
450
-		};
451
-	};
578
+	
452
579
 	nk_io_init{
453
580
 		nk_io_gpio: nk-io-gpio{
454
-            rockchip,pins = <0 RK_PC6 RK_FUNC_GPIO &pcfg_pull_up>;
581
+			rockchip,pins = <0 RK_PB0 RK_FUNC_GPIO &pcfg_pull_none>,
582
+							<0 RK_PB7 RK_FUNC_GPIO &pcfg_pull_none>,
583
+							<0 RK_PC4 RK_FUNC_GPIO &pcfg_pull_none>,
584
+							<4 RK_PD2 RK_FUNC_GPIO &pcfg_pull_none>,
585
+							<4 RK_PB2 RK_FUNC_GPIO &pcfg_pull_none>,
586
+							<1 RK_PA4 RK_FUNC_GPIO &pcfg_pull_none>,
587
+							<0 RK_PC7 RK_FUNC_GPIO &pcfg_pull_none>,
588
+							<1 RK_PB2 RK_FUNC_GPIO &pcfg_pull_none>, 
589
+							<1 RK_PB0 RK_FUNC_GPIO &pcfg_pull_none>,
590
+							<1 RK_PB1 RK_FUNC_GPIO &pcfg_pull_none>,
591
+							<3 RK_PA6 RK_FUNC_GPIO &pcfg_pull_none>,
592
+							<3 RK_PD2 RK_FUNC_GPIO &pcfg_pull_none>,
593
+							<3 RK_PD3 RK_FUNC_GPIO &pcfg_pull_none>,
594
+							<3 RK_PD4 RK_FUNC_GPIO &pcfg_pull_none>,
595
+							<3 RK_PD5 RK_FUNC_GPIO &pcfg_pull_none>,
596
+							<3 RK_PD1 RK_FUNC_GPIO &pcfg_pull_none>,
597
+							<2 RK_PD5 RK_FUNC_GPIO &pcfg_pull_none>,//93 SPI2_CS0_M1_3V3
598
+							<2 RK_PD6 RK_FUNC_GPIO &pcfg_pull_none>,//94 SPI2_MOSI_M1_3V3
599
+							<2 RK_PD7 RK_FUNC_GPIO &pcfg_pull_none>,//95 SPI2_MISO_M1_3V3
600
+							<3 RK_PA0 RK_FUNC_GPIO &pcfg_pull_none>,//96 SPI2_CLK_M1_3V3
601
+							<0 RK_PC6 RK_FUNC_GPIO &pcfg_pull_none>;
455
602
 		};
456
603
 	};
604
+};
605
+
606
+&rk809_sound {
607
+	hp-det-gpio = <&gpio3 RK_PC2 GPIO_ACTIVE_LOW>;
457
608
 };
458
609
 
459
610
 &rkisp {
460
-	status = "okay";
611
+	status = "disabled";
461
612
 };
462
613
 
463
614
 &rkisp_mmu {
464
-	status = "okay";
615
+	status = "disabled";
465
616
 };
466
617
 
467
618
 &rkisp_vir0 {
468
-	status = "okay";
619
+	status = "disabled";
469
620
 
470
621
 	port {
471
622
 		#address-cells = <1>;
..
..
@@ -479,13 +630,15 @@
479
630
 };
480
631
 
481
632
 &route_dsi0 {
482
-	status = "okay";
633
+	status = "disabled";
483
634
 	connect = <&vp1_out_dsi0>;
484
635
 };
485
636
 
637
+
638
+
486
639
 &route_edp {
487
-	status = "okay";
488
-	connect = <&vp0_out_edp>;
640
+	status = "disabled";
641
+	connect = <&vp1_out_edp>;
489
642
 };
490
643
 
491
644
 &sata2 {
..
..
@@ -493,23 +646,19 @@
493
646
 };
494
647
 
495
648
 &sdmmc2 {
496
-        status = "disabled";
497
-};
498
-
499
-&sdmmc1 {
500
-        max-frequency = <150000000>;
501
-        supports-sdio;
502
-        bus-width = <4>;
503
-        disable-wp;
504
-        cap-sd-highspeed;
505
-        cap-sdio-irq;
506
-        keep-power-in-suspend;
507
-        mmc-pwrseq = <&sdio_pwrseq>;
508
-        non-removable;
509
-        pinctrl-names = "default";
510
-        pinctrl-0 = <&sdmmc1_bus4 &sdmmc1_cmd &sdmmc1_clk>;
511
-        sd-uhs-sdr104;
512
-        status = "okay";
649
+	max-frequency = <150000000>;
650
+	supports-sdio;
651
+	bus-width = <4>;
652
+	disable-wp;
653
+	cap-sd-highspeed;
654
+	cap-sdio-irq;
655
+	keep-power-in-suspend;
656
+	mmc-pwrseq = <&sdio_pwrseq>;
657
+	non-removable;
658
+	pinctrl-names = "default";
659
+	pinctrl-0 = <&sdmmc2m0_bus4 &sdmmc2m0_cmd &sdmmc2m0_clk>;
660
+	sd-uhs-sdr104;
661
+	status = "okay";
513
662
 };
514
663
 
515
664
 &spdif_8ch {
..
..
@@ -525,12 +674,12 @@
525
674
 };
526
675
 
527
676
 &vcc3v3_lcd0_n {
528
-	gpio = <&gpio2 RK_PD4 GPIO_ACTIVE_HIGH>;
677
+	gpio = <&gpio0 RK_PC4 GPIO_ACTIVE_HIGH>; 
529
678
 	enable-active-high;
530
679
 };
531
680
 
532
681
 &vcc3v3_lcd1_n {
533
-	gpio = <&gpio0 RK_PC5 GPIO_ACTIVE_HIGH>;
682
+	gpio = <&gpio3 RK_PA3 GPIO_ACTIVE_HIGH>; //MIPI_3V3EN_GPIO3_A3_d_3V3
534
683
 	enable-active-high;
535
684
 };
536
685
 
..
..
@@ -542,22 +691,17 @@
542
691
 
543
692
 &wireless_bluetooth {
544
693
 	compatible = "bluetooth-platdata";
545
-	clocks = <&rk809 1>;
546
-	clock-names = "ext_clock";
547
-	//wifi-bt-power-toggle;
548
-	uart_rts_gpios = <&gpio2 RK_PB5 GPIO_ACTIVE_LOW>;
549
-	BT,power_gpio = <&gpio2 RK_PB7 GPIO_ACTIVE_HIGH>;
550
-	pinctrl-names = "default", "rts_gpio";
551
-	pinctrl-0 = <&uart1m0_rtsn>;
552
-	pinctrl-1 = <&uart1_gpios>;
553
-	BT,reset_gpio    = <&gpio3 RK_PA0 GPIO_ACTIVE_HIGH>;
554
-	BT,wake_gpio     = <&gpio3 RK_PA2 GPIO_ACTIVE_HIGH>;
555
-	BT,wake_host_irq = <&gpio3 RK_PA1 GPIO_ACTIVE_HIGH>;
556
694
 	status = "disabled";
557
695
 };
558
696
 
559
697
 &uart0 {
560
698
 	status = "okay";
699
+};
700
+
701
+&uart1 {	
702
+	pinctrl-names = "default";	
703
+	pinctrl-0 = <&uart1m0_xfer &uart1m0_ctsn>;	
704
+	status = "disabled";		
561
705
 };
562
706
 
563
707
 &uart3 {
..
..
@@ -583,4 +727,4 @@
583
727
 &uart9 {
584
728
 	status = "okay";
585
729
 	pinctrl-0 = <&uart9m1_xfer>;
586
-};
730
+};