add ip1811 driver

hc

2023-11-22 9ca5fbcb63a8dcaee0527f96afb91dc4b4bd8fa9

 kernel/arch/arm64/boot/dts/rockchip/NK-R36S0.dtsi
..
..
@@ -16,13 +16,6 @@
16
16
 	model = "Rockchip RK3568 EVB1 DDR4 V10 Board";
17
17
 	compatible = "rockchip,rk3568-evb1-ddr4-v10", "rockchip,rk3568";
18
18
 
19
-	rk_headset: rk-headset {
20
-		compatible = "rockchip_headset";
21
-		headset_gpio = <&gpio0 RK_PD5 GPIO_ACTIVE_LOW>;
22
-		pinctrl-names = "default";
23
-		pinctrl-0 = <&hp_det>;
24
-	};
25
-
26
19
 	vcc2v5_sys: vcc2v5-ddr {
27
20
 		compatible = "regulator-fixed";
28
21
 		regulator-name = "vcc2v5-sys";
..
..
@@ -33,6 +26,15 @@
33
26
 		vin-supply = <&vcc3v3_sys>;
34
27
 	};
35
28
 
29
+	vcc3v3_vga: vcc3v3-vga {
30
+		compatible = "regulator-fixed";
31
+		regulator-name = "vcc3v3_vga";
32
+		regulator-always-on;
33
+		regulator-boot-on;
34
+		gpio = <&gpio0 RK_PD5 GPIO_ACTIVE_HIGH>;
35
+		enable-active-high;
36
+		vin-supply = <&vcc3v3_sys>;
37
+	};
36
38
 
37
39
 	pcie30_avdd0v9: pcie30-avdd0v9 {
38
40
 		compatible = "regulator-fixed";
..
..
@@ -59,9 +61,7 @@
59
61
 		regulator-name = "vcc3v3_pcie";
60
62
 		regulator-min-microvolt = <3300000>;
61
63
 		regulator-max-microvolt = <3300000>;
62
-		regulator-always-on;
63
64
 		enable-active-high;
64
-		regulator-boot-on;
65
65
 		gpio = <&gpio0 RK_PD4 GPIO_ACTIVE_HIGH>;
66
66
 		startup-delay-us = <5000>;
67
67
 		vin-supply = <&dc_12v>;
..
..
@@ -86,49 +86,130 @@
86
86
 		enable-active-high;
87
87
 		regulator-always-on;
88
88
 		regulator-boot-on;
89
-    	};
89
+	};
90
90
 #endif
91
91
 
92
-	    nk_io_init {
93
-                compatible = "nk_io_control";
94
-				vcc3_io_en_gpio = <&gpio0 RK_PC4 GPIO_ACTIVE_HIGH>; //VCC3_IO_EN_GPIO0_C4_3V3
95
-                hub_host2_5V_rest_gpio = <&gpio4 RK_PD2 GPIO_ACTIVE_HIGH>; //HUB_RST_GPIO4_D2_3V3
96
-                hub_host3_5v_gpio = <&gpio4 RK_PB2 GPIO_ACTIVE_HIGH>; //HOST3_EN_GPIO4_B2_1V8
97
-                vcc_5v_io = <&gpio1 RK_PA4 GPIO_ACTIVE_HIGH>;   //VCC5_IO_EN_GPIO1_A4_3V3
98
-                vcc_12v_io = <&gpio0 RK_PC7 GPIO_ACTIVE_HIGH>; //VCC12_IO_EN_GPIO0_C7_3V3
99
-                en_4g_gpio = <&gpio0 RK_PC6 GPIO_ACTIVE_HIGH>; //4G_PWREN_H_GPIO0_C6
100
-                reset_4g_gpio = <&gpio1 RK_PB2 GPIO_ACTIVE_HIGH>; //4G_RST_GPIO01_B2_3V3
101
-                air_mode_4g_gpio = <&gpio1 RK_PB0 GPIO_ACTIVE_HIGH>; //4G_AIR_MODE_GPIO01_B0_3V3
102
-                wake_4g_gpio = <&gpio1 RK_PB1 GPIO_ACTIVE_HIGH>; //4G_WAKEUP_GPIO01_B1_3V3
103
-				hp_en_gpio = <&gpio3 RK_PA6 GPIO_ACTIVE_HIGH>;//HP_EN_GPIO3_A6_3V3
104
-                spk_out_gpio = <&gpio4 RK_PC2 GPIO_ACTIVE_HIGH>;//AMP_SD_GPIO4_C2_3V3			
105
-				wifi_power_en_gpio = <&gpio3 RK_PC6 GPIO_ACTIVE_HIGH>; //WIFI_PWREN_GPIO3_C6_1V8
106
-//				pcie_power_en_gpio = <&gpio0 RK_PD4 GPIO_ACTIVE_HIGH>;//PCIE_PWREN_H_GPIO0_D4				
107
-				pinctrl-names = "default";
108
-				pinctrl-0 = <&nk_io_gpio>;				
109
-        };
110
-		
111
-		panel: panel {
92
+	ndj_io_init {
93
+         	compatible = "nk_io_control";	
94
+			pinctrl-names = "default";
95
+        	pinctrl-0 = <&nk_io_gpio>;
96
+			
97
+			//gpio_op0 = <&gpio1 RK_PD0 GPIO_ACTIVE_HIGH>;
98
+			
99
+			vcc_5v {
100
+				gpio_num = <&gpio1 RK_PA4 GPIO_ACTIVE_HIGH>; //VCC5_IO_EN_GPIO1_A4_3V3
101
+				gpio_function = <0>;	
102
+			};
103
+			
104
+			vcc_12v {
105
+				gpio_num = <&gpio0 RK_PC7 GPIO_ACTIVE_HIGH>;  //VCC12_IO_EN_GPIO0_C7_3V3
106
+				gpio_function = <0>;
107
+			};
108
+			
109
+			hub_host2_rst {
110
+				gpio_num = <&gpio4 RK_PD2 GPIO_ACTIVE_HIGH>;  //HUB_RST_GPIO4_D2_3V3
111
+				gpio_function = <3>;
112
+			};
113
+			
114
+			hub_host3 {
115
+				gpio_num = <&gpio4 RK_PB2 GPIO_ACTIVE_HIGH>; //HOST3_EN_GPIO4_B2_1V8
116
+				gpio_function = <0>;
117
+			};
118
+			
119
+			wake_4g {
120
+				gpio_num = <&gpio1 RK_PB1 GPIO_ACTIVE_LOW>; //4G_WAKEUP_GPIO01_B1_3V3
121
+				gpio_function = <0>;
122
+			};
123
+			
124
+			air_mode_4g {
125
+				gpio_num = <&gpio1 RK_PB0 GPIO_ACTIVE_LOW>; //4G_AIR_MODE_GPIO01_B0_3V3
126
+				gpio_function = <0>;
127
+			};
128
+			
129
+			reset_4g {
130
+				gpio_num = <&gpio1 RK_PB2 GPIO_ACTIVE_LOW>; //4G_RST_GPIO01_B2_3V3
131
+				gpio_function = <3>;
132
+			};
133
+			
134
+			en_4g {
135
+				gpio_num = <&gpio0 RK_PC6 GPIO_ACTIVE_HIGH>; //4G_PWREN_H_GPIO0_C6
136
+				gpio_function = <0>;
137
+			};
138
+			
139
+			hp_en {
140
+				gpio_num = <&gpio3 RK_PA6 GPIO_ACTIVE_HIGH>;//HP_EN_GPIO3_A6_3V3
141
+				gpio_function = <0>;
142
+			};
143
+			
144
+			usb_ogt {
145
+				gpio_num = <&gpio0 RK_PC2 GPIO_ACTIVE_HIGH>; //OTG_EN_OC_GPIO0_C2
146
+				gpio_function = <0>;
147
+			};
148
+			
149
+			m2_wifi_pwr {
150
+				gpio_num = <&gpio3 RK_PC6 GPIO_ACTIVE_HIGH>;//WIFI_PWREN_GPIO3_C6_1V8
151
+				gpio_function = <0>;
152
+			};
153
+			
154
+			 
155
+	#if 0		
156
+			do1 {
157
+				gpio_num = <&gpio1 RK_PD0 GPIO_ACTIVE_LOW>; 
158
+				gpio_function = <0>;
159
+			};
160
+			
161
+			do2 {
162
+				gpio_num = <&gpio1 RK_PD2 GPIO_ACTIVE_HIGH>;
163
+				gpio_function = <0>;
164
+			};
165
+			
166
+			do3 {
167
+				gpio_num = <&gpio1 RK_PD1 GPIO_ACTIVE_HIGH>;
168
+				gpio_function = <0>;
169
+			};
170
+			
171
+			do4 {
172
+				gpio_num = <&gpio1 RK_PD3 GPIO_ACTIVE_HIGH>;
173
+				gpio_function = <0>;
174
+			};
175
+			
176
+			do5 {
177
+				gpio_num = <&gpio2 RK_PD6 GPIO_ACTIVE_LOW>; 
178
+				gpio_function = <0>;
179
+			};
180
+			
181
+			do6 {
182
+				gpio_num = <&gpio2 RK_PD7 GPIO_ACTIVE_LOW>; 
183
+				gpio_function = <0>;
184
+			};
185
+			
186
+			do7 {
187
+				gpio_num = <&gpio3 RK_PA0 GPIO_ACTIVE_LOW>; 
188
+				gpio_function = <0>;
189
+			};
190
+			
191
+			di1 {
192
+				gpio_num = <&gpio2 RK_PD5 GPIO_ACTIVE_HIGH>;
193
+				gpio_function = <1>;
194
+			};
195
+	#endif
196
+	};
197
+	
198
+			panel: panel {
112
199
 				compatible = "simple-panel";
113
200
 				backlight = <&backlight>;
114
201
 				power-supply = <&vcc3v3_lcd0_n>;
115
-				enable-gpios = <&gpio2 RK_PD4 GPIO_ACTIVE_HIGH>; //LCD0_VDD_H_GPIO2_D4
116
-				reset-gpios = <&gpio3 RK_PD1 GPIO_ACTIVE_LOW>; //7511_RST_GPIO3_D1
117
-				edp-bl-gpios = <&gpio0 RK_PB7 GPIO_ACTIVE_HIGH>;  //LCD0_BKLT_EN_3V3
202
+				enable-gpios = <&gpio2 RK_PD4 GPIO_ACTIVE_HIGH>; //LCD0_VDD_H_GPIO2_D4				
203
+				edp-bl-gpios = <&gpio0 RK_PB7 GPIO_ACTIVE_HIGH>;  //LCD0_PWBLK_H_GPIO0_B7
118
204
 				edp-bl-en = <&gpio0 RK_PB0 GPIO_ACTIVE_HIGH>; //LCD0_BKLT_EN_3V3
119
205
 				bus-format = <MEDIA_BUS_FMT_RGB888_1X24>;
120
206
 				bpc = <8>;
121
207
 				prepare-delay-ms = <200>;
122
208
 				enable-delay-ms = <20>;
123
-				lvds-gpio0 = <&gpio3 RK_PD2 GPIO_ACTIVE_HIGH>; //7511_GPIO0-GPIO3_D2 
124
-				lvds-gpio1 = <&gpio3 RK_PD3 GPIO_ACTIVE_HIGH>; //7511_GPIO1-GPIO3_D3 
125
-				lvds-gpio2 = <&gpio3 RK_PD4 GPIO_ACTIVE_HIGH>; //7511_GPIO2-GPIO3_D4 
126
-				lvds-gpio3 = <&gpio3 RK_PD5 GPIO_ACTIVE_HIGH>; //7511_GPIO3-GPIO3_D5
127
-				nodka-lvds = <15>;
128
209
 
129
210
 				display-timings {
130
-                native-mode = <&timing0>;
131
-                timing0: timing0 {
211
+                native-mode = <&timing>;
212
+                timing: timing {
132
213
 					clock-frequency = <72500000>;
133
214
 					hactive = <1280>;
134
215
 					vactive = <800>;
..
..
@@ -145,8 +226,8 @@
145
226
 					};
146
227
 				};
147
228
 				ports {
148
-					panel_in: endpoint {
149
-					remote-endpoint = <&edp_out>;
229
+					panel_in_lvds: endpoint {
230
+					remote-endpoint = <&lvds_out>;
150
231
 						};
151
232
 					};   
152
233
 				};
..
..
@@ -212,10 +293,6 @@
212
293
  * video_phy0 needs to be enabled
213
294
  * when dsi0 is enabled
214
295
  */
215
-&video_phy0 {
216
-	status = "disabled";
217
-};
218
-
219
296
 &dsi0 {
220
297
 	status = "disabled";
221
298
 };
..
..
@@ -236,10 +313,6 @@
236
313
  * video_phy1 needs to be enabled
237
314
  * when dsi1 is enabled
238
315
  */
239
- 
240
-&video_phy1 {
241
-	status = "disabled";
242
-}; 
243
316
 &dsi1 {
244
317
 	status = "disabled";
245
318
 };
..
..
@@ -256,88 +329,51 @@
256
329
 	power-supply = <&vcc3v3_lcd1_n>;
257
330
 };
258
331
 
259
-/*
260
-*  edp_start
261
-*/
262
-
263
332
 &edp {
333
+	//hpd-gpios = <&gpio0 RK_PC2 GPIO_ACTIVE_HIGH>;	
264
334
     force-hpd;
335
+    status = "disabled";
336
+};
337
+
338
+&lvds {
265
339
     status = "okay";
266
340
     ports {
267
341
         port@1 {
268
342
             reg = <1>;
269
-            edp_out: endpoint {
270
-                remote-endpoint = <&panel_in>;
343
+            lvds_out: endpoint {
344
+                remote-endpoint = <&panel_in_lvds>;
271
345
             };
272
346
         };
273
-    };
347
+   
348
+	};
349
+};
350
+
351
+&route_lvds{
352
+	 status = "okay";
353
+	 connect = <&vp2_out_lvds>;
354
+};
355
+
356
+&lvds_in_vp2 {
357
+	status = "okay";
274
358
 };
275
359
 
276
360
 &edp_phy {
277
-    status = "okay";
361
+	status = "okay";
278
362
 };
279
363
 
280
364
 &edp_in_vp0 {
281
-    status = "disabled";
282
-};
283
-
284
-&edp_in_vp1 {
285
-    status = "okay";
286
-};
287
-
288
-&route_edp {
289
-    status = "okay";
290
-    connect = <&vp1_out_edp>;
291
-};
292
-
293
-&route_edp {
294
-	status = "okay";
295
-};
296
-/*
297
-*  edp_end
298
-*/
299
-
300
-/*
301
-*  Hdmi_start
302
-*/
303
-
304
-&hdmi {
305
-	status = "okay";
306
-	rockchip,phy-table =
307
-		<92812500  0x8009 0x0000 0x0270>,
308
-		<165000000 0x800b 0x0000 0x026d>,
309
-		<185625000 0x800b 0x0000 0x01ed>,
310
-		<297000000 0x800b 0x0000 0x01ad>,
311
-		<594000000 0x8029 0x0000 0x0088>,
312
-		<000000000 0x0000 0x0000 0x0000>;
313
-};
314
-
315
-&route_hdmi {
316
-	status = "okay";
317
-	connect = <&vp0_out_hdmi>;
318
-};
319
-
320
-&hdmi_in_vp0 {
321
-	status = "okay";
322
-};
323
-
324
-&hdmi_in_vp1 {
325
365
 	status = "disabled";
326
366
 };
327
367
 
328
-&hdmi_sound {
368
+&edp_in_vp1 {
329
369
 	status = "okay";
330
370
 };
331
-
332
-/*
333
- *  Hdmi_END
334
-*/
335
371
 
336
372
 &gmac0 {
337
373
 	phy-mode = "rgmii";
338
374
 	clock_in_out = "output";
339
375
 
340
-	snps,reset-gpio = <&gpio2 RK_PD3 GPIO_ACTIVE_LOW>;
376
+	snps,reset-gpio = <&gpio2 RK_PC6 GPIO_ACTIVE_LOW>;
341
377
 	snps,reset-active-low;
342
378
 	/* Reset time is 20ms, 100ms for rtl8211f */
343
379
 	snps,reset-delays-us = <0 20000 100000>;
..
..
@@ -357,7 +393,9 @@
357
393
 	rx_delay = <0x2f>;
358
394
 
359
395
 	phy-handle = <&rgmii_phy0>;
360
-	status = "disabled";
396
+	
397
+	status = "okay";
398
+	
361
399
 };
362
400
 
363
401
 &gmac1 {
..
..
@@ -391,9 +429,7 @@
391
429
  * power-supply should switche to vcc3v3_lcd1_n
392
430
  * when mipi panel is connected to dsi1.
393
431
  */
394
-&gt1x {
395
-	power-supply = <&vcc3v3_lcd0_n>;
396
-};
432
+
397
433
 
398
434
 &i2c3 {
399
435
 	status = "okay";
..
..
@@ -412,7 +448,7 @@
412
448
 };
413
449
 
414
450
 &i2c4 {
415
-	status = "okay";
451
+	status = "disabled";
416
452
 	gc8034: gc8034@37 {
417
453
 		compatible = "galaxycore,gc8034";
418
454
 		status = "okay";
..
..
@@ -458,7 +494,7 @@
458
494
 		};
459
495
 	};
460
496
 	ov5695: ov5695@36 {
461
-		status = "okay";
497
+		status = "disabled";
462
498
 		compatible = "ovti,ov5695";
463
499
 		reg = <0x36>;
464
500
 		clocks = <&cru CLK_CIF_OUT>;
..
..
@@ -481,19 +517,6 @@
481
517
 	};
482
518
 };
483
519
 
484
-&i2c5 {
485
-	status = "okay";
486
-
487
-	hym8563: hym8563@51 {
488
-		compatible = "haoyu,hym8563";
489
-		reg = <0x51>;
490
-		#clock-cells = <0>;
491
-		clock-frequency = <32768>;
492
-		clock-output-names = "xin32k";
493
-		/* rtc_int is not connected */
494
-	};
495
-};
496
-
497
520
 &mdio0 {
498
521
 	rgmii_phy0: phy@0 {
499
522
 		compatible = "ethernet-phy-ieee802.3-c22";
..
..
@@ -508,7 +531,13 @@
508
531
 	};
509
532
 };
510
533
 
534
+&video_phy0 {
535
+	status = "okay";
536
+};
511
537
 
538
+&video_phy1 {
539
+	status = "disabled";
540
+};
512
541
 
513
542
 &pcie30phy {
514
543
 	status = "okay";
..
..
@@ -520,31 +549,33 @@
520
549
 	status = "okay";
521
550
 };
522
551
 
552
+&pcie3x2 {
553
+	reset-gpios = <&gpio3 RK_PA1 GPIO_ACTIVE_HIGH>;
554
+	vpcie3v3-supply = <&vcc3v3_pcie>;
555
+	status = "disabled";
556
+};
557
+
558
+&pcie3x1 {
559
+	rockchip,bifurcation;
560
+	reset-gpios = <&gpio3 RK_PA1 GPIO_ACTIVE_HIGH>;
561
+	vpcie3v3-supply = <&vcc3v3_pcie>;
562
+	status = "okay";
563
+};
564
+
523
565
 &pinctrl {
524
-//	cam {
525
-//		camera_pwr: camera-pwr {
526
-//			rockchip,pins =
527
-//				/* camera power en */
528
-//				<0 RK_PC1 RK_FUNC_GPIO &pcfg_pull_none>;
529
-//		};
530
-//	};
566
+
531
567
 	headphone {
532
568
 		hp_det: hp-det {
533
-			rockchip,pins = <0 RK_PD5 RK_FUNC_GPIO &pcfg_pull_down>;
569
+			rockchip,pins = <3 RK_PC2 RK_FUNC_GPIO &pcfg_pull_down>;
534
570
 		};
535
571
 	};
536
572
 
537
573
 	wireless-wlan {
538
574
 		wifi_host_wake_irq: wifi-host-wake-irq {
539
-			rockchip,pins = <2 RK_PB2 RK_FUNC_GPIO &pcfg_pull_down>;
575
+			rockchip,pins = <3 RK_PD4 RK_FUNC_GPIO &pcfg_pull_down>;
540
576
 		};
541
577
 	};
542
-
543
-	wireless-bluetooth {
544
-		uart1_gpios: uart1-gpios {
545
-			rockchip,pins = <2 RK_PB5 RK_FUNC_GPIO &pcfg_pull_none>;
546
-		};
547
-	};
578
+	
548
579
 	nk_io_init{
549
580
 		nk_io_gpio: nk-io-gpio{
550
581
 			rockchip,pins = <0 RK_PB0 RK_FUNC_GPIO &pcfg_pull_none>,
..
..
@@ -554,19 +585,26 @@
554
585
 							<4 RK_PB2 RK_FUNC_GPIO &pcfg_pull_none>,
555
586
 							<1 RK_PA4 RK_FUNC_GPIO &pcfg_pull_none>,
556
587
 							<0 RK_PC7 RK_FUNC_GPIO &pcfg_pull_none>,
557
-							<1 RK_PB2 RK_FUNC_GPIO &pcfg_pull_none>,
588
+							<1 RK_PB2 RK_FUNC_GPIO &pcfg_pull_none>, 
558
589
 							<1 RK_PB0 RK_FUNC_GPIO &pcfg_pull_none>,
559
590
 							<1 RK_PB1 RK_FUNC_GPIO &pcfg_pull_none>,
560
591
 							<3 RK_PA6 RK_FUNC_GPIO &pcfg_pull_none>,
561
-							<4 RK_PC2 RK_FUNC_GPIO &pcfg_pull_none>,
562
592
 							<3 RK_PD2 RK_FUNC_GPIO &pcfg_pull_none>,
563
593
 							<3 RK_PD3 RK_FUNC_GPIO &pcfg_pull_none>,
564
594
 							<3 RK_PD4 RK_FUNC_GPIO &pcfg_pull_none>,
565
595
 							<3 RK_PD5 RK_FUNC_GPIO &pcfg_pull_none>,
566
596
 							<3 RK_PD1 RK_FUNC_GPIO &pcfg_pull_none>,
597
+							<2 RK_PD5 RK_FUNC_GPIO &pcfg_pull_none>,//93 SPI2_CS0_M1_3V3
598
+							<2 RK_PD6 RK_FUNC_GPIO &pcfg_pull_none>,//94 SPI2_MOSI_M1_3V3
599
+							<2 RK_PD7 RK_FUNC_GPIO &pcfg_pull_none>,//95 SPI2_MISO_M1_3V3
600
+							<3 RK_PA0 RK_FUNC_GPIO &pcfg_pull_none>,//96 SPI2_CLK_M1_3V3
567
601
 							<0 RK_PC6 RK_FUNC_GPIO &pcfg_pull_none>;
568
602
 		};
569
603
 	};
604
+};
605
+
606
+&rk809_sound {
607
+	hp-det-gpio = <&gpio3 RK_PC2 GPIO_ACTIVE_LOW>;
570
608
 };
571
609
 
572
610
 &rkisp {
..
..
@@ -598,28 +636,29 @@
598
636
 
599
637
 
600
638
 
639
+&route_edp {
640
+	status = "disabled";
641
+	connect = <&vp1_out_edp>;
642
+};
643
+
601
644
 &sata2 {
602
645
 	status = "okay";
603
646
 };
604
647
 
605
648
 &sdmmc2 {
606
-        status = "disabled";
607
-};
608
-
609
-&sdmmc1 {
610
-        max-frequency = <150000000>;
611
-        supports-sdio;
612
-        bus-width = <4>;
613
-        disable-wp;
614
-        cap-sd-highspeed;
615
-        cap-sdio-irq;
616
-        keep-power-in-suspend;
617
-        mmc-pwrseq = <&sdio_pwrseq>;
618
-        non-removable;
619
-        pinctrl-names = "default";
620
-        pinctrl-0 = <&sdmmc1_bus4 &sdmmc1_cmd &sdmmc1_clk>;
621
-        sd-uhs-sdr104;
622
-        status = "okay";
649
+	max-frequency = <150000000>;
650
+	supports-sdio;
651
+	bus-width = <4>;
652
+	disable-wp;
653
+	cap-sd-highspeed;
654
+	cap-sdio-irq;
655
+	keep-power-in-suspend;
656
+	mmc-pwrseq = <&sdio_pwrseq>;
657
+	non-removable;
658
+	pinctrl-names = "default";
659
+	pinctrl-0 = <&sdmmc2m0_bus4 &sdmmc2m0_cmd &sdmmc2m0_clk>;
660
+	sd-uhs-sdr104;
661
+	status = "okay";
623
662
 };
624
663
 
625
664
 &spdif_8ch {
..
..
@@ -640,7 +679,7 @@
640
679
 };
641
680
 
642
681
 &vcc3v3_lcd1_n {
643
-	gpio = <&gpio0 RK_PC5 GPIO_ACTIVE_HIGH>;
682
+	gpio = <&gpio3 RK_PA3 GPIO_ACTIVE_HIGH>; //MIPI_3V3EN_GPIO3_A3_d_3V3
644
683
 	enable-active-high;
645
684
 };
646
685
 
..
..
@@ -652,22 +691,17 @@
652
691
 
653
692
 &wireless_bluetooth {
654
693
 	compatible = "bluetooth-platdata";
655
-	clocks = <&rk809 1>;
656
-	clock-names = "ext_clock";
657
-	//wifi-bt-power-toggle;
658
-	uart_rts_gpios = <&gpio2 RK_PB5 GPIO_ACTIVE_LOW>;
659
-	BT,power_gpio = <&gpio2 RK_PB7 GPIO_ACTIVE_HIGH>;
660
-	pinctrl-names = "default", "rts_gpio";
661
-	pinctrl-0 = <&uart1m0_rtsn>;
662
-	pinctrl-1 = <&uart1_gpios>;
663
-	BT,reset_gpio    = <&gpio3 RK_PA0 GPIO_ACTIVE_HIGH>;
664
-	BT,wake_gpio     = <&gpio3 RK_PA2 GPIO_ACTIVE_HIGH>;
665
-	BT,wake_host_irq = <&gpio3 RK_PA1 GPIO_ACTIVE_HIGH>;
666
694
 	status = "disabled";
667
695
 };
668
696
 
669
697
 &uart0 {
670
698
 	status = "okay";
699
+};
700
+
701
+&uart1 {	
702
+	pinctrl-names = "default";	
703
+	pinctrl-0 = <&uart1m0_xfer &uart1m0_ctsn>;	
704
+	status = "disabled";		
671
705
 };
672
706
 
673
707
 &uart3 {
..
..
@@ -693,4 +727,4 @@
693
727
 &uart9 {
694
728
 	status = "okay";
695
729
 	pinctrl-0 = <&uart9m1_xfer>;
696
-};
730
+};