forked from ~ljy/RK356X_SDK_RELEASE
blame | history | patch | commit | commitdiff
hc
2023-12-09 95099d4622f8cb224d94e314c7a8e0df60b13f87 
 kernel/arch/arm/boot/dts/sun8i-h3-bananapi-m2-plus.dts
....@@ -42,195 +42,9 @@
4242 
4343 /dts-v1/;
4444 #include "sun8i-h3.dtsi"
45
-#include "sunxi-common-regulators.dtsi"
46
-
47
-#include <dt-bindings/gpio/gpio.h>
48
-#include <dt-bindings/input/input.h>
45
+#include "sunxi-bananapi-m2-plus.dtsi"
4946 
5047 / {
51
-	model = "Banana Pi BPI-M2-Plus";
48
+	model = "Banana Pi BPI-M2-Plus H3";
5249 	compatible = "sinovoip,bpi-m2-plus", "allwinner,sun8i-h3";
53
-
54
-	aliases {
55
-		ethernet0 = &emac;
56
-		serial0 = &uart0;
57
-		serial1 = &uart1;
58
-	};
59
-
60
-	chosen {
61
-		stdout-path = "serial0:115200n8";
62
-	};
63
-
64
-	connector {
65
-		compatible = "hdmi-connector";
66
-		type = "a";
67
-
68
-		port {
69
-			hdmi_con_in: endpoint {
70
-				remote-endpoint = <&hdmi_out_con>;
71
-			};
72
-		};
73
-	};
74
-
75
-	leds {
76
-		compatible = "gpio-leds";
77
-		pinctrl-names = "default";
78
-
79
-		pwr_led {
80
-			label = "bananapi-m2-plus:red:pwr";
81
-			gpios = <&r_pio 0 10 GPIO_ACTIVE_HIGH>; /* PL10 */
82
-			default-state = "on";
83
-		};
84
-	};
85
-
86
-	gpio_keys {
87
-		compatible = "gpio-keys";
88
-		pinctrl-names = "default";
89
-
90
-		sw4 {
91
-			label = "power";
92
-			linux,code = <BTN_0>;
93
-			gpios = <&r_pio 0 3 GPIO_ACTIVE_LOW>;
94
-		};
95
-	};
96
-
97
-	reg_gmac_3v3: gmac-3v3 {
98
-		      compatible = "regulator-fixed";
99
-		      regulator-name = "gmac-3v3";
100
-		      regulator-min-microvolt = <3300000>;
101
-		      regulator-max-microvolt = <3300000>;
102
-		      startup-delay-us = <100000>;
103
-		      enable-active-high;
104
-		      gpio = <&pio 3 6 GPIO_ACTIVE_HIGH>;
105
-	};
106
-
107
-	wifi_pwrseq: wifi_pwrseq {
108
-		compatible = "mmc-pwrseq-simple";
109
-		pinctrl-names = "default";
110
-		reset-gpios = <&r_pio 0 7 GPIO_ACTIVE_LOW>; /* PL7 */
111
-	};
112
-};
113
-
114
-&de {
115
-	status = "okay";
116
-};
117
-
118
-&ehci0 {
119
-	status = "okay";
120
-};
121
-
122
-&ehci1 {
123
-	status = "okay";
124
-};
125
-
126
-&ehci2 {
127
-	status = "okay";
128
-};
129
-
130
-&emac {
131
-	pinctrl-names = "default";
132
-	pinctrl-0 = <&emac_rgmii_pins>;
133
-	phy-supply = <&reg_gmac_3v3>;
134
-	phy-handle = <&ext_rgmii_phy>;
135
-	phy-mode = "rgmii";
136
-
137
-	status = "okay";
138
-};
139
-
140
-&external_mdio {
141
-	ext_rgmii_phy: ethernet-phy@1 {
142
-		compatible = "ethernet-phy-ieee802.3-c22";
143
-		reg = <1>;
144
-	};
145
-};
146
-
147
-&hdmi {
148
-	status = "okay";
149
-};
150
-
151
-&hdmi_out {
152
-	hdmi_out_con: endpoint {
153
-		remote-endpoint = <&hdmi_con_in>;
154
-	};
155
-};
156
-
157
-&ir {
158
-	pinctrl-names = "default";
159
-	pinctrl-0 = <&ir_pins_a>;
160
-	status = "okay";
161
-};
162
-
163
-&mmc0 {
164
-	vmmc-supply = <&reg_vcc3v3>;
165
-	bus-width = <4>;
166
-	cd-gpios = <&pio 5 6 GPIO_ACTIVE_LOW>; /* PF6 */
167
-	status = "okay";
168
-};
169
-
170
-&mmc1 {
171
-	vmmc-supply = <&reg_vcc3v3>;
172
-	vqmmc-supply = <&reg_vcc3v3>;
173
-	mmc-pwrseq = <&wifi_pwrseq>;
174
-	bus-width = <4>;
175
-	non-removable;
176
-	status = "okay";
177
-
178
-	brcmf: wifi@1 {
179
-		reg = <1>;
180
-		compatible = "brcm,bcm4329-fmac";
181
-		interrupt-parent = <&pio>;
182
-		interrupts = <6 10 IRQ_TYPE_LEVEL_LOW>; /* PG10 / EINT10 */
183
-		interrupt-names = "host-wake";
184
-	};
185
-};
186
-
187
-&mmc2 {
188
-	pinctrl-names = "default";
189
-	pinctrl-0 = <&mmc2_8bit_pins>;
190
-	vmmc-supply = <&reg_vcc3v3>;
191
-	vqmmc-supply = <&reg_vcc3v3>;
192
-	bus-width = <8>;
193
-	non-removable;
194
-	status = "okay";
195
-};
196
-
197
-&ohci0 {
198
-	status = "okay";
199
-};
200
-
201
-&ohci1 {
202
-	status = "okay";
203
-};
204
-
205
-&ohci2 {
206
-	status = "okay";
207
-};
208
-
209
-&reg_usb0_vbus {
210
-	gpio = <&pio 3 11 GPIO_ACTIVE_HIGH>; /* PD11 */
211
-	status = "okay";
212
-};
213
-
214
-&uart0 {
215
-	pinctrl-names = "default";
216
-	pinctrl-0 = <&uart0_pins_a>;
217
-	status = "okay";
218
-};
219
-
220
-&uart1 {
221
-	pinctrl-names = "default";
222
-	pinctrl-0 = <&uart1_pins>, <&uart1_rts_cts_pins>;
223
-	status = "okay";
224
-};
225
-
226
-&usb_otg {
227
-	dr_mode = "otg";
228
-	status = "okay";
229
-};
230
-
231
-&usbphy {
232
-	usb0_id_det-gpios = <&r_pio 0 6 GPIO_ACTIVE_HIGH>; /* PL6 */
233
-	usb0_vbus-supply = <&reg_usb0_vbus>;
234
-	/* USB host VBUS is on as long as VCC-IO is on */
235
-	status = "okay";
23650 };