forked from ~ljy/RK356X_SDK_RELEASE

hc
2024-10-22 8ac6c7a54ed1b98d142dce24b11c6de6a1e239a5
kernel/arch/arm64/boot/dts/rockchip/NK-R36S0.dtsi
....@@ -8,6 +8,7 @@
88
99 #include <dt-bindings/gpio/gpio.h>
1010 #include <dt-bindings/pinctrl/rockchip.h>
11
+#include <dt-bindings/display/media-bus-format.h>
1112 #include "rk3568.dtsi"
1213 #include "rk3568-evb.dtsi"
1314
....@@ -17,7 +18,8 @@
1718
1819 rk_headset: rk-headset {
1920 compatible = "rockchip_headset";
20
- headset_gpio = <&gpio3 RK_PC2 GPIO_ACTIVE_LOW>;
21
+ headset_gpio = <&gpio0 RK_PD5 GPIO_ACTIVE_LOW>;
22
+ spk_ctl_gpio = <&gpio4 RK_PC2 GPIO_ACTIVE_LOW>;//AMP_SD_GPIO4_C2_3V3
2123 pinctrl-names = "default";
2224 pinctrl-0 = <&hp_det>;
2325 };
....@@ -32,15 +34,6 @@
3234 vin-supply = <&vcc3v3_sys>;
3335 };
3436
35
- vcc3v3_vga: vcc3v3-vga {
36
- compatible = "regulator-fixed";
37
- regulator-name = "vcc3v3_vga";
38
- regulator-always-on;
39
- regulator-boot-on;
40
- gpio = <&gpio0 RK_PD5 GPIO_ACTIVE_HIGH>;
41
- enable-active-high;
42
- vin-supply = <&vcc3v3_sys>;
43
- };
4437
4538 pcie30_avdd0v9: pcie30-avdd0v9 {
4639 compatible = "regulator-fixed";
....@@ -67,7 +60,9 @@
6760 regulator-name = "vcc3v3_pcie";
6861 regulator-min-microvolt = <3300000>;
6962 regulator-max-microvolt = <3300000>;
63
+ regulator-always-on;
7064 enable-active-high;
65
+ regulator-boot-on;
7166 gpio = <&gpio0 RK_PD4 GPIO_ACTIVE_HIGH>;
7267 startup-delay-us = <5000>;
7368 vin-supply = <&dc_12v>;
....@@ -95,37 +90,194 @@
9590 };
9691 #endif
9792
93
+#if 0
94
+ leds: leds {
95
+ compatible = "gpio-leds";
96
+ sig_led: sig_led {
97
+ gpios = <&gpio4 RK_PC4 GPIO_ACTIVE_HIGH>;
98
+ default-state = "on";
99
+ };
100
+ };
101
+
102
+ leds: leds {
103
+ compatible = "gpio-leds";
104
+ err_led: err_led {
105
+ gpios = <&gpio4 RK_PD2 GPIO_ACTIVE_HIGH>;
106
+ default-state = "on";
107
+ };
108
+ };
109
+#endif
110
+
111
+ ndj_io_init {
112
+ compatible = "nk_io_control";
113
+ pinctrl-names = "default";
114
+ pinctrl-0 = <&nk_io_gpio>;
115
+
116
+ //gpio_op0 = <&gpio1 RK_PD0 GPIO_ACTIVE_HIGH>;
117
+
118
+ vcc_5v {
119
+ gpio_num = <&gpio1 RK_PA4 GPIO_ACTIVE_HIGH>; //VCC5_IO_EN_GPIO1_A4_3V3
120
+ gpio_function = <0>;
121
+ };
122
+
123
+ vcc_12v {
124
+ gpio_num = <&gpio0 RK_PC7 GPIO_ACTIVE_HIGH>; //VCC12_IO_EN_GPIO0_C7_3V3
125
+ gpio_function = <0>;
126
+ };
127
+
128
+ vcc_3.3v {
129
+ gpio_num = <&gpio0 RK_PC4 GPIO_ACTIVE_HIGH>; //VCC3_IO_EN_GPIO0_C4_3V3
130
+ gpio_function = <0>;
131
+ };
132
+
133
+ ax88772_rst {
134
+ gpio_num = <&gpio3 RK_PB5 GPIO_ACTIVE_HIGH>; //AX88772_RST_GPIO3_B5_3V3
135
+ gpio_function = <3>;
136
+ };
137
+
138
+ ax88631_rst {
139
+ gpio_num = <&gpio3 RK_PB6 GPIO_ACTIVE_HIGH>; //AX88772_RST_GPIO3_B6_3V3
140
+ gpio_function = <3>;
141
+ };
142
+/*
143
+ hub_host3 {
144
+ gpio_num = <&gpio4 RK_PB2 GPIO_ACTIVE_HIGH>; //HOST3_EN_GPIO4_B2_1V8
145
+ gpio_function = <0>;
146
+ };
147
+*/
148
+ wake_4g {
149
+ gpio_num = <&gpio1 RK_PB1 GPIO_ACTIVE_LOW>; //4G_WAKEUP_GPIO01_B1_3V3
150
+ gpio_function = <0>;
151
+ };
152
+
153
+ air_mode_4g {
154
+ gpio_num = <&gpio1 RK_PB0 GPIO_ACTIVE_LOW>; //4G_AIR_MODE_GPIO01_B0_3V3
155
+ gpio_function = <0>;
156
+ };
157
+
158
+ reset_4g {
159
+ gpio_num = <&gpio1 RK_PB2 GPIO_ACTIVE_LOW>; //4G_RST_GPIO01_B2_3V3
160
+ gpio_function = <3>;
161
+ };
162
+
163
+ en_4g {
164
+ gpio_num = <&gpio0 RK_PC6 GPIO_ACTIVE_HIGH>; //4G_PWREN_H_GPIO0_C6
165
+ gpio_function = <0>;
166
+ };
167
+
168
+ //gpio99 {
169
+ // gpio_num = <&gpio3 RK_PA3 GPIO_ACTIVE_LOW>;//HP_EN_GPIO3_A6_3V3
170
+ // gpio_function = <1>;
171
+ //};
172
+
173
+ wifi_power_en {
174
+ gpio_num = <&gpio3 RK_PC6 GPIO_ACTIVE_HIGH>; //WIFI_PWREN_GPIO3_C6_1V8
175
+ gpio_function = <0>;
176
+ };
177
+ #if 0
178
+ do1 {
179
+ gpio_num = <&gpio1 RK_PD0 GPIO_ACTIVE_LOW>;
180
+ gpio_function = <0>;
181
+ };
182
+
183
+ do2 {
184
+ gpio_num = <&gpio1 RK_PD2 GPIO_ACTIVE_HIGH>;
185
+ gpio_function = <0>;
186
+ };
187
+
188
+ do3 {
189
+ gpio_num = <&gpio1 RK_PD1 GPIO_ACTIVE_HIGH>;
190
+ gpio_function = <0>;
191
+ };
192
+
193
+ do4 {
194
+ gpio_num = <&gpio1 RK_PD3 GPIO_ACTIVE_HIGH>;
195
+ gpio_function = <0>;
196
+ };
197
+
198
+ do5 {
199
+ gpio_num = <&gpio2 RK_PD6 GPIO_ACTIVE_LOW>;
200
+ gpio_function = <0>;
201
+ };
202
+
203
+ do6 {
204
+ gpio_num = <&gpio2 RK_PD7 GPIO_ACTIVE_LOW>;
205
+ gpio_function = <0>;
206
+ };
207
+
208
+ do7 {
209
+ gpio_num = <&gpio3 RK_PA0 GPIO_ACTIVE_LOW>;
210
+ gpio_function = <0>;
211
+ };
212
+
213
+ di1 {
214
+ gpio_num = <&gpio2 RK_PD5 GPIO_ACTIVE_HIGH>;
215
+ gpio_function = <1>;
216
+ };
217
+ #endif
218
+ };
219
+#if 0
98220 nk_io_init {
99221 compatible = "nk_io_control";
100
- usb_en_oc_gpio = <&gpio0 RK_PA5 GPIO_ACTIVE_HIGH>; //USB_EN_OC_GPIO0_A5
101
- lcd_bk_en_gpio = <&gpio0 RK_PB0 GPIO_ACTIVE_HIGH>; //LCD0_BKLT_EN_3V3
102
- lcd_pwblk_gpio = <&gpio0 RK_PB7 GPIO_ACTIVE_HIGH>; //LCD0_BKLT_EN_3V3
103
- vcc3_io_en_gpio = <&gpio0 RK_PC4 GPIO_ACTIVE_HIGH>; //VCC3_IO_EN_GPIO0_C4_3V3
222
+// vcc3_io_en_gpio = <&gpio0 RK_PC4 GPIO_ACTIVE_HIGH>; //VCC3_IO_EN_GPIO0_C4_3V3
104223 hub_host2_5V_rest_gpio = <&gpio4 RK_PD2 GPIO_ACTIVE_HIGH>; //HUB_RST_GPIO4_D2_3V3
105224 hub_host3_5v_gpio = <&gpio4 RK_PB2 GPIO_ACTIVE_HIGH>; //HOST3_EN_GPIO4_B2_1V8
106
-// hub_host3_5V_rest_gpio = <&gpio0 RK_PB6 GPIO_ACTIVE_HIGH>;
107225 vcc_5v_io = <&gpio1 RK_PA4 GPIO_ACTIVE_HIGH>; //VCC5_IO_EN_GPIO1_A4_3V3
108226 vcc_12v_io = <&gpio0 RK_PC7 GPIO_ACTIVE_HIGH>; //VCC12_IO_EN_GPIO0_C7_3V3
109227 en_4g_gpio = <&gpio0 RK_PC6 GPIO_ACTIVE_HIGH>; //4G_PWREN_H_GPIO0_C6
110228 reset_4g_gpio = <&gpio1 RK_PB2 GPIO_ACTIVE_HIGH>; //4G_RST_GPIO01_B2_3V3
111229 air_mode_4g_gpio = <&gpio1 RK_PB0 GPIO_ACTIVE_HIGH>; //4G_AIR_MODE_GPIO01_B0_3V3
112230 wake_4g_gpio = <&gpio1 RK_PB1 GPIO_ACTIVE_HIGH>; //4G_WAKEUP_GPIO01_B1_3V3
113
-
114
- edp_enable_gpio = <&gpio0 RK_PC4 GPIO_ACTIVE_HIGH>;
115
- edp_gpio0 = <&gpio3 RK_PD2 GPIO_ACTIVE_LOW>; //7511_GPIO0-GPIO3_D2
116
- edp_gpio1 = <&gpio3 RK_PD3 GPIO_ACTIVE_LOW>; //7511_GPIO1-GPIO3_D3
117
- edp_gpio2 = <&gpio3 RK_PD4 GPIO_ACTIVE_LOW>; //7511_GPIO2-GPIO3_D4
118
- edp_gpio3 = <&gpio3 RK_PD5 GPIO_ACTIVE_LOW>; //7511_GPIO3-GPIO3_D5
119
- edp_reset = <&gpio3 RK_PD1 GPIO_ACTIVE_LOW>; //7511_RST_GPIO3_D1
120
-// tp_reset = <&gpio3 RK_PA7 GPIO_ACTIVE_HIGH>;
121
-// vddio_mipi = <&gpio1 RK_PA4 GPIO_ACTIVE_HIGH>;
122
-
231
+ hp_en_gpio = <&gpio3 RK_PA6 GPIO_ACTIVE_HIGH>;//HP_EN_GPIO3_A6_3V3
232
+// spk_out_gpio = <&gpio4 RK_PC2 GPIO_ACTIVE_HIGH>;//AMP_SD_GPIO4_C2_3V3
123233 wifi_power_en_gpio = <&gpio3 RK_PC6 GPIO_ACTIVE_HIGH>; //WIFI_PWREN_GPIO3_C6_1V8
124
-
234
+// pcie_power_en_gpio = <&gpio0 RK_PD4 GPIO_ACTIVE_HIGH>;//PCIE_PWREN_H_GPIO0_D4
125235 pinctrl-names = "default";
126
- pinctrl-0 = <&nk_io_gpio>;
127
- nodka_lvds = <9>;
236
+ pinctrl-0 = <&nk_io_gpio>;
128237 };
238
+#endif
239
+ panel: panel {
240
+ compatible = "simple-panel";
241
+ backlight = <&backlight>;
242
+ power-supply = <&vcc3v3_lcd0_n>;
243
+ enable-gpios = <&gpio2 RK_PD4 GPIO_ACTIVE_HIGH>; //LCD0_VDD_H_GPIO2_D4
244
+ reset-gpios = <&gpio3 RK_PD1 GPIO_ACTIVE_LOW>; //7511_RST_GPIO3_D1
245
+ edp-bl-gpios = <&gpio0 RK_PB7 GPIO_ACTIVE_HIGH>; //LCD0_BKLT_EN_3V3
246
+ edp-bl-en = <&gpio0 RK_PB0 GPIO_ACTIVE_HIGH>; //LCD0_BKLT_EN_3V3
247
+ bus-format = <MEDIA_BUS_FMT_RGB888_1X24>;
248
+ bpc = <8>;
249
+ prepare-delay-ms = <200>;
250
+ enable-delay-ms = <20>;
251
+ lvds-gpio0 = <&gpio3 RK_PD2 GPIO_ACTIVE_HIGH>; //7511_GPIO0-GPIO3_D2
252
+ lvds-gpio1 = <&gpio3 RK_PD3 GPIO_ACTIVE_HIGH>; //7511_GPIO1-GPIO3_D3
253
+ lvds-gpio2 = <&gpio3 RK_PD4 GPIO_ACTIVE_HIGH>; //7511_GPIO2-GPIO3_D4
254
+ lvds-gpio3 = <&gpio3 RK_PD5 GPIO_ACTIVE_HIGH>; //7511_GPIO3-GPIO3_D5
255
+ nodka-lvds = <15>;
256
+
257
+ display-timings {
258
+ native-mode = <&timing>;
259
+ timing: timing {
260
+ clock-frequency = <72500000>;
261
+ hactive = <1280>;
262
+ vactive = <800>;
263
+ hfront-porch = <70>;
264
+ hsync-len = <2>;
265
+ hback-porch = <88>;
266
+ vfront-porch = <7>;
267
+ vsync-len = <4>;
268
+ vback-porch = <17>;
269
+ hsync-active = <21>;
270
+ vsync-active = <0>;
271
+ de-active = <0>;
272
+ pixelclk-active = <0>;
273
+ };
274
+ };
275
+ ports {
276
+ panel_in_lvds: endpoint {
277
+ remote-endpoint = <&lvds_out>;
278
+ };
279
+ };
280
+ };
129281 };
130282
131283 &combphy0_us {
....@@ -141,11 +293,11 @@
141293 };
142294
143295 &csi2_dphy_hw {
144
- status = "okay";
296
+ status = "disabled";
145297 };
146298
147299 &csi2_dphy0 {
148
- status = "okay";
300
+ status = "disabled";
149301
150302 ports {
151303 #address-cells = <1>;
....@@ -188,8 +340,12 @@
188340 * video_phy0 needs to be enabled
189341 * when dsi0 is enabled
190342 */
343
+&video_phy0 {
344
+ status = "disabled";
345
+};
346
+
191347 &dsi0 {
192
- status = "okay";
348
+ status = "disabled";
193349 };
194350
195351 &dsi0_in_vp0 {
....@@ -197,7 +353,7 @@
197353 };
198354
199355 &dsi0_in_vp1 {
200
- status = "okay";
356
+ status = "disabled";
201357 };
202358
203359 &dsi0_panel {
....@@ -208,6 +364,10 @@
208364 * video_phy1 needs to be enabled
209365 * when dsi1 is enabled
210366 */
367
+
368
+&video_phy1 {
369
+ status = "disabled";
370
+};
211371 &dsi1 {
212372 status = "disabled";
213373 };
....@@ -221,31 +381,117 @@
221381 };
222382
223383 &dsi1_panel {
224
- power-supply = <&vcc3v3_lcd1_n>;
384
+// power-supply = <&vcc3v3_lcd1_n>; //MIPI_3V3EN_GPIO3_A3_d_3V3
385
+ vddio-mipi = <&gpio3 RK_PA4 GPIO_ACTIVE_HIGH>; //MIPI_EN_1V8_GPIO3_A4_d_3V3
386
+ reset-gpios = <&gpio3 RK_PC7 GPIO_ACTIVE_LOW>; //MIPI_RST_L_GPIO3_C7
387
+ vcc-5v-gpio = <&gpio1 RK_PA4 GPIO_ACTIVE_HIGH>; //VCC5_IO_EN_GPIO1_A4_3V3
388
+ pinctrl-names = "default";
389
+ pinctrl-0 = <&lcd1_rst_gpio>;
225390 };
226391
392
+&route_dsi1 {
393
+ status = "disabled";
394
+ connect = <&vp1_out_dsi1>;
395
+};
396
+
397
+
398
+/*
399
+* edp_start
400
+*/
401
+
227402 &edp {
228
- hpd-gpios = <&gpio0 RK_PC2 GPIO_ACTIVE_HIGH>;
229
- status = "okay";
403
+ force-hpd;
404
+ status = "disabled";
230405 };
231406
232407 &edp_phy {
233
- status = "okay";
408
+ status = "disabled";
234409 };
235410
236411 &edp_in_vp0 {
237
- status = "okay";
412
+ status = "disabled";
238413 };
239414
240415 &edp_in_vp1 {
416
+ status = "disabled";
417
+
418
+};
419
+
420
+&route_edp {
421
+ status = "disabled";
422
+ connect = <&vp1_out_edp>;
423
+};
424
+
425
+&route_edp {
241426 status = "disabled";
242427 };
428
+
429
+&lvds {
430
+ status = "disabled";
431
+ ports {
432
+ port@1 {
433
+ reg = <1>;
434
+ lvds_out:endpoint {
435
+ remote-endpoint = <&panel_in_lvds>;
436
+ };
437
+ };
438
+ };
439
+};
440
+
441
+&route_lvds{
442
+ status = "okay";
443
+ connect = <&vp1_out_lvds>;
444
+};
445
+
446
+&lvds_in_vp1 {
447
+ status = "disabled";
448
+};
449
+
450
+/*
451
+* edp_end
452
+*/
453
+
454
+/*
455
+* Hdmi_start
456
+*/
457
+
458
+&hdmi {
459
+ status = "okay";
460
+ rockchip,phy-table =
461
+ <92812500 0x8009 0x0000 0x0270>,
462
+ <165000000 0x800b 0x0000 0x026d>,
463
+ <185625000 0x800b 0x0000 0x01ed>,
464
+ <297000000 0x800b 0x0000 0x01ad>,
465
+ <594000000 0x8029 0x0000 0x0088>,
466
+ <000000000 0x0000 0x0000 0x0000>;
467
+};
468
+
469
+&route_hdmi {
470
+ status = "okay";
471
+ connect = <&vp0_out_hdmi>;
472
+};
473
+
474
+&hdmi_in_vp0 {
475
+ status = "okay";
476
+};
477
+
478
+&hdmi_in_vp1 {
479
+ status = "disabled";
480
+};
481
+
482
+&hdmi_sound {
483
+ status = "okay";
484
+};
485
+
486
+/*
487
+ * Hdmi_END
488
+*/
243489
244490 &gmac0 {
245491 phy-mode = "rgmii";
246492 clock_in_out = "output";
247493
248
- snps,reset-gpio = <&gpio2 RK_PD3 GPIO_ACTIVE_LOW>;
494
+ snps,reset-gpio = <&gpio2 RK_PC6 GPIO_ACTIVE_LOW>;
249495 snps,reset-active-low;
250496 /* Reset time is 20ms, 100ms for rtl8211f */
251497 snps,reset-delays-us = <0 20000 100000>;
....@@ -265,7 +511,9 @@
265511 rx_delay = <0x2f>;
266512
267513 phy-handle = <&rgmii_phy0>;
514
+
268515 status = "disabled";
516
+
269517 };
270518
271519 &gmac1 {
....@@ -299,9 +547,7 @@
299547 * power-supply should switche to vcc3v3_lcd1_n
300548 * when mipi panel is connected to dsi1.
301549 */
302
-&gt1x {
303
- power-supply = <&vcc3v3_lcd0_n>;
304
-};
550
+
305551
306552 &i2c3 {
307553 status = "okay";
....@@ -317,13 +563,10 @@
317563 compatible = "nk_mcu";
318564 reg = <0x15>;
319565 };
320
-
321
-
322
-
323566 };
324567
325568 &i2c4 {
326
- status = "okay";
569
+ status = "disabled";
327570 gc8034: gc8034@37 {
328571 compatible = "galaxycore,gc8034";
329572 status = "okay";
....@@ -335,7 +578,6 @@
335578 reset-gpios = <&gpio3 RK_PB6 GPIO_ACTIVE_LOW>;
336579 pwdn-gpios = <&gpio4 RK_PB4 GPIO_ACTIVE_LOW>;
337580 rockchip,grf = <&grf>;
338
- power-domains = <&power RK3568_PD_VI>;
339581 rockchip,camera-module-index = <0>;
340582 rockchip,camera-module-facing = "back";
341583 rockchip,camera-module-name = "RK-CMK-8M-2-v1";
....@@ -369,7 +611,7 @@
369611 };
370612 };
371613 ov5695: ov5695@36 {
372
- status = "okay";
614
+ status = "disabled";
373615 compatible = "ovti,ov5695";
374616 reg = <0x36>;
375617 clocks = <&cru CLK_CIF_OUT>;
....@@ -392,6 +634,19 @@
392634 };
393635 };
394636
637
+&i2c5 {
638
+ status = "okay";
639
+
640
+ hym8563: hym8563@51 {
641
+ compatible = "haoyu,hym8563";
642
+ reg = <0x51>;
643
+ #clock-cells = <0>;
644
+ clock-frequency = <32768>;
645
+ clock-output-names = "xin32k";
646
+ /* rtc_int is not connected */
647
+ };
648
+};
649
+
395650 &mdio0 {
396651 rgmii_phy0: phy@0 {
397652 compatible = "ethernet-phy-ieee802.3-c22";
....@@ -406,20 +661,14 @@
406661 };
407662 };
408663
409
-&video_phy0 {
410
- status = "okay";
411
-};
412664
413
-&video_phy1 {
665
+
666
+&pcie30phy {
414667 status = "disabled";
415668 };
416669
417
-&pcie30phy {
418
- status = "okay";
419
-};
420
-
421
-&pcie3x2 {
422
- reset-gpios = <&gpio2 RK_PD6 GPIO_ACTIVE_HIGH>;
670
+&pcie2x1 {
671
+ reset-gpios = <&gpio3 RK_PC1 GPIO_ACTIVE_HIGH>;
423672 vpcie3v3-supply = <&vcc3v3_pcie>;
424673 status = "okay";
425674 };
....@@ -434,7 +683,8 @@
434683 // };
435684 headphone {
436685 hp_det: hp-det {
437
- rockchip,pins = <3 RK_PC2 RK_FUNC_GPIO &pcfg_pull_down>;
686
+ rockchip,pins = <0 RK_PD5 RK_FUNC_GPIO &pcfg_pull_down>,
687
+ <4 RK_PC2 RK_FUNC_GPIO &pcfg_pull_down>;
438688 };
439689 };
440690
....@@ -449,23 +699,65 @@
449699 rockchip,pins = <2 RK_PB5 RK_FUNC_GPIO &pcfg_pull_none>;
450700 };
451701 };
702
+
703
+ lcd1 {
704
+ lcd1_rst_gpio: lcd1-rst-gpio {
705
+ rockchip,pins = <3 RK_PC7 RK_FUNC_GPIO &pcfg_pull_none>;
706
+ };
707
+ };
708
+
452709 nk_io_init{
453710 nk_io_gpio: nk-io-gpio{
454
- rockchip,pins = <0 RK_PC6 RK_FUNC_GPIO &pcfg_pull_up>;
711
+ rockchip,pins = <0 RK_PB0 RK_FUNC_GPIO &pcfg_pull_none>,
712
+ <0 RK_PB7 RK_FUNC_GPIO &pcfg_pull_none>,
713
+ <0 RK_PC4 RK_FUNC_GPIO &pcfg_pull_none>,
714
+ <4 RK_PD2 RK_FUNC_GPIO &pcfg_pull_none>,
715
+ <4 RK_PB2 RK_FUNC_GPIO &pcfg_pull_none>,
716
+ <1 RK_PA4 RK_FUNC_GPIO &pcfg_pull_none>,
717
+ <0 RK_PC7 RK_FUNC_GPIO &pcfg_pull_none>,
718
+ <1 RK_PB2 RK_FUNC_GPIO &pcfg_pull_none>,
719
+ <1 RK_PB0 RK_FUNC_GPIO &pcfg_pull_none>,
720
+ <1 RK_PB1 RK_FUNC_GPIO &pcfg_pull_none>,
721
+ <3 RK_PA6 RK_FUNC_GPIO &pcfg_pull_none>,
722
+ <3 RK_PD2 RK_FUNC_GPIO &pcfg_pull_none>,
723
+ <3 RK_PD3 RK_FUNC_GPIO &pcfg_pull_none>,
724
+ <3 RK_PD4 RK_FUNC_GPIO &pcfg_pull_none>,
725
+ <3 RK_PD5 RK_FUNC_GPIO &pcfg_pull_none>,
726
+ <3 RK_PA4 RK_FUNC_GPIO &pcfg_pull_none>,
727
+ <3 RK_PA6 RK_FUNC_GPIO &pcfg_pull_none>,
728
+ <3 RK_PB5 RK_FUNC_GPIO &pcfg_pull_none>,
729
+ <3 RK_PD1 RK_FUNC_GPIO &pcfg_pull_none>,
730
+ <0 RK_PB0 RK_FUNC_GPIO &pcfg_pull_none>,//GPIO0_B0_u_3V3 DO1 8
731
+ <0 RK_PB3 RK_FUNC_GPIO &pcfg_pull_none>,//GPIO0_B3_u_3V3 DO2 11
732
+ <0 RK_PB4 RK_FUNC_GPIO &pcfg_pull_none>,//GPIO0_B4_u_3V3 DO3 12
733
+ <0 RK_PB5 RK_FUNC_GPIO &pcfg_pull_none>,//GPIO0_B5_u_3V3 DO4 13
734
+ <0 RK_PB6 RK_FUNC_GPIO &pcfg_pull_none>,//GPIO0_B6_u_3V3 DO5 14
735
+
736
+ <0 RK_PC0 RK_FUNC_GPIO &pcfg_pull_none>,//GPIO0_C0_d_3V3 DI1 16
737
+ <0 RK_PC1 RK_FUNC_GPIO &pcfg_pull_none>,//GPIO0_C1_d_3V3 DI2 17
738
+ <0 RK_PC2 RK_FUNC_GPIO &pcfg_pull_none>,//GPIO0_C2_d_3V3 DI3 18
739
+ <0 RK_PC3 RK_FUNC_GPIO &pcfg_pull_none>,//GPIO0_C3_d_3V3 DI4 19
740
+ <0 RK_PC5 RK_FUNC_GPIO &pcfg_pull_none>,//GPIO0_C5_d_3V3 DI5 21
741
+ <0 RK_PC6 RK_FUNC_GPIO &pcfg_pull_none>,
742
+ <4 RK_PC4 RK_FUNC_GPIO &pcfg_pull_none>, //sig_led
743
+ <4 RK_PD2 RK_FUNC_GPIO &pcfg_pull_none>, //err_led
744
+ <4 RK_PC2 RK_FUNC_GPIO &pcfg_pull_none>, //run_led
745
+ <4 RK_PB2 RK_FUNC_GPIO &pcfg_pull_none>; //HOST3_EN_GPIO4_B2_1V8
746
+
455747 };
456748 };
457749 };
458750
459751 &rkisp {
460
- status = "okay";
752
+ status = "disabled";
461753 };
462754
463755 &rkisp_mmu {
464
- status = "okay";
756
+ status = "disabled";
465757 };
466758
467759 &rkisp_vir0 {
468
- status = "okay";
760
+ status = "disabled";
469761
470762 port {
471763 #address-cells = <1>;
....@@ -478,15 +770,7 @@
478770 };
479771 };
480772
481
-&route_dsi0 {
482
- status = "okay";
483
- connect = <&vp1_out_dsi0>;
484
-};
485773
486
-&route_edp {
487
- status = "okay";
488
- connect = <&vp0_out_edp>;
489
-};
490774
491775 &sata2 {
492776 status = "okay";
....@@ -524,15 +808,6 @@
524808 pinctrl-0 = <&uart8m0_xfer &uart8m0_ctsn>;
525809 };
526810
527
-&vcc3v3_lcd0_n {
528
- gpio = <&gpio2 RK_PD4 GPIO_ACTIVE_HIGH>;
529
- enable-active-high;
530
-};
531
-
532
-&vcc3v3_lcd1_n {
533
- gpio = <&gpio0 RK_PC5 GPIO_ACTIVE_HIGH>;
534
- enable-active-high;
535
-};
536811
537812 &wireless_wlan {
538813 pinctrl-names = "default";
....@@ -546,18 +821,23 @@
546821 clock-names = "ext_clock";
547822 //wifi-bt-power-toggle;
548823 uart_rts_gpios = <&gpio2 RK_PB5 GPIO_ACTIVE_LOW>;
549
- BT,power_gpio = <&gpio2 RK_PB7 GPIO_ACTIVE_HIGH>;
550824 pinctrl-names = "default", "rts_gpio";
551825 pinctrl-0 = <&uart1m0_rtsn>;
552826 pinctrl-1 = <&uart1_gpios>;
553
- BT,reset_gpio = <&gpio3 RK_PA0 GPIO_ACTIVE_HIGH>;
554
- BT,wake_gpio = <&gpio3 RK_PA2 GPIO_ACTIVE_HIGH>;
555
- BT,wake_host_irq = <&gpio3 RK_PA1 GPIO_ACTIVE_HIGH>;
827
+ BT,reset_gpio = <&gpio2 RK_PB7 GPIO_ACTIVE_HIGH>;
828
+ BT,wake_gpio = <&gpio2 RK_PC0 GPIO_ACTIVE_HIGH>;
829
+ BT,wake_host_irq = <&gpio2 RK_PC1 GPIO_ACTIVE_HIGH>;
556830 status = "disabled";
557831 };
558832
559833 &uart0 {
560
- status = "okay";
834
+ status = "disabled";
835
+};
836
+
837
+&uart1 {
838
+ pinctrl-names = "default";
839
+ pinctrl-0 = <&uart1m0_xfer &uart1m0_ctsn>;
840
+ status = "disabled";
561841 };
562842
563843 &uart3 {
....@@ -566,7 +846,7 @@
566846 };
567847
568848 &uart4 {
569
- status = "okay";
849
+ status = "disabled";
570850 pinctrl-0 = <&uart4m1_xfer>;
571851 };
572852
....@@ -575,12 +855,18 @@
575855 pinctrl-0 = <&uart5m1_xfer>;
576856 };
577857
858
+
578859 &uart7 {
579860 status = "okay";
580861 pinctrl-0 = <&uart7m1_xfer>;
581862 };
582863
864
+&uart8 {
865
+ status = "disabled";
866
+ pinctrl-0 = <&uart8m1_xfer>;
867
+};
868
+
583869 &uart9 {
584
- status = "okay";
870
+ status = "disabled";
585871 pinctrl-0 = <&uart9m1_xfer>;
586872 };