forked from ~ljy/RK356X_SDK_RELEASE
blame | history | patch | commit | commitdiff
hc
2024-10-22 8ac6c7a54ed1b98d142dce24b11c6de6a1e239a5 
 kernel/arch/arm64/boot/dts/rockchip/NK-R36S0.dtsi
....@@ -34,15 +34,6 @@
3434 		vin-supply = <&vcc3v3_sys>;
3535 	};
3636 
37
-	vcc3v3_vga: vcc3v3-vga {
38
-		compatible = "regulator-fixed";
39
-		regulator-name = "vcc3v3_vga";
40
-		regulator-always-on;
41
-		regulator-boot-on;
42
-		gpio = <&gpio0 RK_PD5 GPIO_ACTIVE_HIGH>;
43
-		enable-active-high;
44
-		vin-supply = <&vcc3v3_sys>;
45
-	};
4637 
4738 	pcie30_avdd0v9: pcie30-avdd0v9 {
4839 		compatible = "regulator-fixed";
....@@ -98,6 +89,25 @@
9889 		regulator-boot-on;
9990     	};
10091 #endif
92
+
93
+#if 0
94
+		leds: leds {
95
+		compatible = "gpio-leds";
96
+		sig_led: sig_led {
97
+			gpios = <&gpio4 RK_PC4 GPIO_ACTIVE_HIGH>;
98
+			default-state = "on";
99
+		};
100
+	};
101
+	
102
+		leds: leds {
103
+		compatible = "gpio-leds";	
104
+		err_led: err_led {
105
+			gpios = <&gpio4 RK_PD2 GPIO_ACTIVE_HIGH>;
106
+			default-state = "on";
107
+		};
108
+	};
109
+#endif
110
+
101111 	ndj_io_init {
102112          	compatible = "nk_io_control";	
103113 			pinctrl-names = "default";
....@@ -115,16 +125,26 @@
115125 				gpio_function = <0>;
116126 			};
117127 			
118
-			hub_host2_rst {
119
-				gpio_num = <&gpio4 RK_PD2 GPIO_ACTIVE_HIGH>;  //HUB_RST_GPIO4_D2_3V3
128
+			vcc_3.3v {
129
+				gpio_num = <&gpio0 RK_PC4 GPIO_ACTIVE_HIGH>; //VCC3_IO_EN_GPIO0_C4_3V3
130
+				gpio_function = <0>;
131
+			};
132
+			
133
+			ax88772_rst {
134
+				gpio_num = <&gpio3 RK_PB5 GPIO_ACTIVE_HIGH>;  //AX88772_RST_GPIO3_B5_3V3
120135 				gpio_function = <3>;
121136 			};
122137 			
138
+			ax88631_rst {
139
+				gpio_num = <&gpio3 RK_PB6 GPIO_ACTIVE_HIGH>;  //AX88772_RST_GPIO3_B6_3V3
140
+				gpio_function = <3>;
141
+			};
142
+/*
123143 			hub_host3 {
124144 				gpio_num = <&gpio4 RK_PB2 GPIO_ACTIVE_HIGH>; //HOST3_EN_GPIO4_B2_1V8
125145 				gpio_function = <0>;
126146 			};
127
-			
147
+*/			
128148 			wake_4g {
129149 				gpio_num = <&gpio1 RK_PB1 GPIO_ACTIVE_LOW>; //4G_WAKEUP_GPIO01_B1_3V3
130150 				gpio_function = <0>;
....@@ -145,10 +165,10 @@
145165 				gpio_function = <0>;
146166 			};
147167 			
148
-			hp_en {
149
-				gpio_num = <&gpio3 RK_PA6 GPIO_ACTIVE_HIGH>;//HP_EN_GPIO3_A6_3V3
150
-				gpio_function = <0>;
151
-			};
168
+			//gpio99 {
169
+			//	gpio_num = <&gpio3 RK_PA3 GPIO_ACTIVE_LOW>;//HP_EN_GPIO3_A6_3V3
170
+			//	gpio_function = <1>;
171
+			//};
152172 			
153173 			wifi_power_en {
154174 				gpio_num = <&gpio3 RK_PC6 GPIO_ACTIVE_HIGH>; //WIFI_PWREN_GPIO3_C6_1V8
....@@ -235,8 +255,8 @@
235255 				nodka-lvds = <15>;
236256 
237257 				display-timings {
238
-                native-mode = <&timing0>;
239
-                timing0: timing0 {
258
+                native-mode = <&timing>;
259
+                timing: timing {
240260 					clock-frequency = <72500000>;
241261 					hactive = <1280>;
242262 					vactive = <800>;
....@@ -253,8 +273,8 @@
253273 					};
254274 				};
255275 				ports {
256
-					panel_in: endpoint {
257
-					remote-endpoint = <&edp_out>;
276
+					panel_in_lvds: endpoint {
277
+					remote-endpoint = <&lvds_out>;
258278 						};
259279 					};   
260280 				};
....@@ -346,7 +366,7 @@
346366  */
347367  
348368 &video_phy1 {
349
-	status = "okay";
369
+	status = "disabled";
350370 }; 
351371 &dsi1 {
352372 	status = "disabled";
....@@ -357,11 +377,11 @@
357377 };
358378 
359379 &dsi1_in_vp1 {
360
-	status = "okay";
380
+	status = "disabled";
361381 };
362382 
363383 &dsi1_panel {
364
-	power-supply = <&vcc3v3_lcd1_n>;   //MIPI_3V3EN_GPIO3_A3_d_3V3
384
+//	power-supply = <&vcc3v3_lcd1_n>;   //MIPI_3V3EN_GPIO3_A3_d_3V3
365385     vddio-mipi = <&gpio3 RK_PA4 GPIO_ACTIVE_HIGH>; //MIPI_EN_1V8_GPIO3_A4_d_3V3
366386     reset-gpios = <&gpio3 RK_PC7 GPIO_ACTIVE_LOW>; //MIPI_RST_L_GPIO3_C7
367387     vcc-5v-gpio = <&gpio1 RK_PA4 GPIO_ACTIVE_HIGH>; //VCC5_IO_EN_GPIO1_A4_3V3
....@@ -381,20 +401,11 @@
381401 
382402 &edp {
383403     force-hpd;
384
-    status = "okay";
385
-    ports {
386
-        port@1 {
387
-            reg = <1>;
388
-            edp_out: endpoint {
389
-                remote-endpoint = <&panel_in>;
390
-            };
391
-        };
392
-   
393
-	};
404
+	status = "disabled";
394405 };
395406 
396407 &edp_phy {
397
-	status = "okay";
408
+	status = "disabled";
398409 };
399410 
400411 &edp_in_vp0 {
....@@ -402,18 +413,40 @@
402413 };
403414 
404415 &edp_in_vp1 {
405
-    status = "okay";
416
+    status = "disabled";
406417 
407418 };
408419 
409420 &route_edp {
410
-    status = "okay";
421
+    status = "disabled";
411422     connect = <&vp1_out_edp>;
412423 };
413424 
414425 &route_edp {
415
-	status = "okay";
426
+	status = "disabled";
416427 };
428
+
429
+&lvds {
430
+	status = "disabled";
431
+	ports {
432
+		port@1 {
433
+			reg = <1>;
434
+			lvds_out:endpoint {
435
+				remote-endpoint = <&panel_in_lvds>;
436
+			};
437
+		};
438
+	};
439
+};
440
+
441
+&route_lvds{
442
+	status = "okay";
443
+	connect = <&vp1_out_lvds>;
444
+};
445
+
446
+&lvds_in_vp1 {
447
+	status = "disabled";
448
+};
449
+
417450 /*
418451 *  edp_end
419452 */
....@@ -631,7 +664,7 @@
631664 
632665 
633666 &pcie30phy {
634
-	status = "okay";
667
+	status = "disabled";
635668 };
636669 
637670 &pcie2x1 {
....@@ -690,12 +723,27 @@
690723 							<3 RK_PD3 RK_FUNC_GPIO &pcfg_pull_none>,
691724 							<3 RK_PD4 RK_FUNC_GPIO &pcfg_pull_none>,
692725 							<3 RK_PD5 RK_FUNC_GPIO &pcfg_pull_none>,
726
+							<3 RK_PA4 RK_FUNC_GPIO &pcfg_pull_none>,
727
+							<3 RK_PA6 RK_FUNC_GPIO &pcfg_pull_none>,
728
+							<3 RK_PB5 RK_FUNC_GPIO &pcfg_pull_none>,
693729 							<3 RK_PD1 RK_FUNC_GPIO &pcfg_pull_none>,
694
-							<2 RK_PD5 RK_FUNC_GPIO &pcfg_pull_none>,//93 SPI2_CS0_M1_3V3
695
-							<2 RK_PD6 RK_FUNC_GPIO &pcfg_pull_none>,//94 SPI2_MOSI_M1_3V3
696
-							<2 RK_PD7 RK_FUNC_GPIO &pcfg_pull_none>,//95 SPI2_MISO_M1_3V3
697
-							<3 RK_PA0 RK_FUNC_GPIO &pcfg_pull_none>,//96 SPI2_CLK_M1_3V3
698
-							<0 RK_PC6 RK_FUNC_GPIO &pcfg_pull_none>;
730
+							<0 RK_PB0 RK_FUNC_GPIO &pcfg_pull_none>,//GPIO0_B0_u_3V3  DO1 8
731
+							<0 RK_PB3 RK_FUNC_GPIO &pcfg_pull_none>,//GPIO0_B3_u_3V3  DO2 11
732
+							<0 RK_PB4 RK_FUNC_GPIO &pcfg_pull_none>,//GPIO0_B4_u_3V3  DO3 12
733
+							<0 RK_PB5 RK_FUNC_GPIO &pcfg_pull_none>,//GPIO0_B5_u_3V3  DO4 13
734
+							<0 RK_PB6 RK_FUNC_GPIO &pcfg_pull_none>,//GPIO0_B6_u_3V3  DO5 14
735
+							
736
+							<0 RK_PC0 RK_FUNC_GPIO &pcfg_pull_none>,//GPIO0_C0_d_3V3  DI1 16
737
+							<0 RK_PC1 RK_FUNC_GPIO &pcfg_pull_none>,//GPIO0_C1_d_3V3  DI2 17
738
+							<0 RK_PC2 RK_FUNC_GPIO &pcfg_pull_none>,//GPIO0_C2_d_3V3  DI3 18
739
+							<0 RK_PC3 RK_FUNC_GPIO &pcfg_pull_none>,//GPIO0_C3_d_3V3  DI4 19
740
+							<0 RK_PC5 RK_FUNC_GPIO &pcfg_pull_none>,//GPIO0_C5_d_3V3  DI5 21
741
+							<0 RK_PC6 RK_FUNC_GPIO &pcfg_pull_none>,
742
+							<4 RK_PC4 RK_FUNC_GPIO &pcfg_pull_none>, //sig_led
743
+							<4 RK_PD2 RK_FUNC_GPIO &pcfg_pull_none>, //err_led
744
+							<4 RK_PC2 RK_FUNC_GPIO &pcfg_pull_none>, //run_led
745
+							<4 RK_PB2 RK_FUNC_GPIO &pcfg_pull_none>; //HOST3_EN_GPIO4_B2_1V8
746
+
699747 		};
700748 	};
701749 };
....@@ -760,15 +808,6 @@
760808 	pinctrl-0 = <&uart8m0_xfer &uart8m0_ctsn>;
761809 };
762810 
763
-&vcc3v3_lcd0_n {
764
-	gpio = <&gpio0 RK_PC4 GPIO_ACTIVE_HIGH>; 
765
-	enable-active-high;
766
-};
767
-
768
-&vcc3v3_lcd1_n {
769
-	gpio = <&gpio3 RK_PA3 GPIO_ACTIVE_HIGH>; //MIPI_3V3EN_GPIO3_A3_d_3V3
770
-	enable-active-high;
771
-};
772811 
773812 &wireless_wlan {
774813 	pinctrl-names = "default";
....@@ -788,17 +827,17 @@
788827 	BT,reset_gpio    = <&gpio2 RK_PB7 GPIO_ACTIVE_HIGH>;
789828     BT,wake_gpio     = <&gpio2 RK_PC0 GPIO_ACTIVE_HIGH>;
790829     BT,wake_host_irq = <&gpio2 RK_PC1 GPIO_ACTIVE_HIGH>;
791
-	status = "okay";
830
+	status = "disabled";
792831 };
793832 
794833 &uart0 {
795
-	status = "okay";
834
+	status = "disabled";
796835 };
797836 
798837 &uart1 {	
799838 	pinctrl-names = "default";	
800839 	pinctrl-0 = <&uart1m0_xfer &uart1m0_ctsn>;	
801
-	status = "okay";		
840
+	status = "disabled";		
802841 };
803842 
804843 &uart3 {
....@@ -807,7 +846,7 @@
807846 };
808847 
809848 &uart4 {
810
-	status = "okay";
849
+	status = "disabled";
811850 	pinctrl-0 = <&uart4m1_xfer>;
812851 };
813852 
....@@ -816,12 +855,18 @@
816855 	pinctrl-0 = <&uart5m1_xfer>;
817856 };
818857 
858
+
819859 &uart7 {
820860 	status = "okay";
821861 	pinctrl-0 = <&uart7m1_xfer>;
822862 };
823863 
864
+&uart8 {
865
+	status = "disabled";
866
+	pinctrl-0 = <&uart8m1_xfer>;
867
+};
868
+
824869 &uart9 {
825
-	status = "okay";
870
+	status = "disabled";
826871 	pinctrl-0 = <&uart9m1_xfer>;
827872 };