forked from ~ljy/RK356X_SDK_RELEASE
blame | history | patch | commit | commitdiff
hc
2024-10-22 8ac6c7a54ed1b98d142dce24b11c6de6a1e239a5 
 kernel/arch/arm64/boot/dts/qcom/sdm845-mtp.dts
....@@ -7,11 +7,13 @@
77 
88 /dts-v1/;
99 
10
+#include <dt-bindings/gpio/gpio.h>
11
+#include <dt-bindings/regulator/qcom,rpmh-regulator.h>
1012 #include "sdm845.dtsi"
1113 
1214 / {
1315 	model = "Qualcomm Technologies, Inc. SDM845 MTP";
14
-	compatible = "qcom,sdm845-mtp";
16
+	compatible = "qcom,sdm845-mtp", "qcom,sdm845";
1517 
1618 	aliases {
1719 		serial0 = &uart9;
....@@ -20,6 +22,425 @@
2022 	chosen {
2123 		stdout-path = "serial0:115200n8";
2224 	};
25
+
26
+	vph_pwr: vph-pwr-regulator {
27
+		compatible = "regulator-fixed";
28
+		regulator-name = "vph_pwr";
29
+		regulator-min-microvolt = <3700000>;
30
+		regulator-max-microvolt = <3700000>;
31
+	};
32
+
33
+	/*
34
+	 * Apparently RPMh does not provide support for PM8998 S4 because it
35
+	 * is always-on; model it as a fixed regulator.
36
+	 */
37
+	vreg_s4a_1p8: pm8998-smps4 {
38
+		compatible = "regulator-fixed";
39
+		regulator-name = "vreg_s4a_1p8";
40
+
41
+		regulator-min-microvolt = <1800000>;
42
+		regulator-max-microvolt = <1800000>;
43
+
44
+		regulator-always-on;
45
+		regulator-boot-on;
46
+
47
+		vin-supply = <&vph_pwr>;
48
+	};
49
+};
50
+
51
+&adsp_pas {
52
+	status = "okay";
53
+	firmware-name = "qcom/sdm845/adsp.mdt";
54
+};
55
+
56
+&apps_rsc {
57
+	pm8998-rpmh-regulators {
58
+		compatible = "qcom,pm8998-rpmh-regulators";
59
+		qcom,pmic-id = "a";
60
+
61
+		vdd-s1-supply = <&vph_pwr>;
62
+		vdd-s2-supply = <&vph_pwr>;
63
+		vdd-s3-supply = <&vph_pwr>;
64
+		vdd-s4-supply = <&vph_pwr>;
65
+		vdd-s5-supply = <&vph_pwr>;
66
+		vdd-s6-supply = <&vph_pwr>;
67
+		vdd-s7-supply = <&vph_pwr>;
68
+		vdd-s8-supply = <&vph_pwr>;
69
+		vdd-s9-supply = <&vph_pwr>;
70
+		vdd-s10-supply = <&vph_pwr>;
71
+		vdd-s11-supply = <&vph_pwr>;
72
+		vdd-s12-supply = <&vph_pwr>;
73
+		vdd-s13-supply = <&vph_pwr>;
74
+		vdd-l1-l27-supply = <&vreg_s7a_1p025>;
75
+		vdd-l2-l8-l17-supply = <&vreg_s3a_1p35>;
76
+		vdd-l3-l11-supply = <&vreg_s7a_1p025>;
77
+		vdd-l4-l5-supply = <&vreg_s7a_1p025>;
78
+		vdd-l6-supply = <&vph_pwr>;
79
+		vdd-l7-l12-l14-l15-supply = <&vreg_s5a_2p04>;
80
+		vdd-l9-supply = <&vreg_bob>;
81
+		vdd-l10-l23-l25-supply = <&vreg_bob>;
82
+		vdd-l13-l19-l21-supply = <&vreg_bob>;
83
+		vdd-l16-l28-supply = <&vreg_bob>;
84
+		vdd-l18-l22-supply = <&vreg_bob>;
85
+		vdd-l20-l24-supply = <&vreg_bob>;
86
+		vdd-l26-supply = <&vreg_s3a_1p35>;
87
+		vin-lvs-1-2-supply = <&vreg_s4a_1p8>;
88
+
89
+		vreg_s2a_1p125: smps2 {
90
+			regulator-min-microvolt = <1100000>;
91
+			regulator-max-microvolt = <1100000>;
92
+		};
93
+
94
+		vreg_s3a_1p35: smps3 {
95
+			regulator-min-microvolt = <1352000>;
96
+			regulator-max-microvolt = <1352000>;
97
+		};
98
+
99
+		vreg_s5a_2p04: smps5 {
100
+			regulator-min-microvolt = <1904000>;
101
+			regulator-max-microvolt = <2040000>;
102
+		};
103
+
104
+		vreg_s7a_1p025: smps7 {
105
+			regulator-min-microvolt = <900000>;
106
+			regulator-max-microvolt = <1028000>;
107
+		};
108
+
109
+		vdd_qusb_hs0:
110
+		vdda_hp_pcie_core:
111
+		vdda_mipi_csi0_0p9:
112
+		vdda_mipi_csi1_0p9:
113
+		vdda_mipi_csi2_0p9:
114
+		vdda_mipi_dsi0_pll:
115
+		vdda_mipi_dsi1_pll:
116
+		vdda_qlink_lv:
117
+		vdda_qlink_lv_ck:
118
+		vdda_qrefs_0p875:
119
+		vdda_pcie_core:
120
+		vdda_pll_cc_ebi01:
121
+		vdda_pll_cc_ebi23:
122
+		vdda_sp_sensor:
123
+		vdda_ufs1_core:
124
+		vdda_ufs2_core:
125
+		vdda_usb1_ss_core:
126
+		vdda_usb2_ss_core:
127
+		vreg_l1a_0p875: ldo1 {
128
+			regulator-min-microvolt = <880000>;
129
+			regulator-max-microvolt = <880000>;
130
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
131
+		};
132
+
133
+		vddpx_10:
134
+		vreg_l2a_1p2: ldo2 {
135
+			regulator-min-microvolt = <1200000>;
136
+			regulator-max-microvolt = <1200000>;
137
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
138
+			regulator-always-on;
139
+		};
140
+
141
+		vreg_l3a_1p0: ldo3 {
142
+			regulator-min-microvolt = <1000000>;
143
+			regulator-max-microvolt = <1000000>;
144
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
145
+		};
146
+
147
+		vdd_wcss_cx:
148
+		vdd_wcss_mx:
149
+		vdda_wcss_pll:
150
+		vreg_l5a_0p8: ldo5 {
151
+			regulator-min-microvolt = <800000>;
152
+			regulator-max-microvolt = <800000>;
153
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
154
+		};
155
+
156
+		vddpx_13:
157
+		vreg_l6a_1p8: ldo6 {
158
+			regulator-min-microvolt = <1856000>;
159
+			regulator-max-microvolt = <1856000>;
160
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
161
+		};
162
+
163
+		vreg_l7a_1p8: ldo7 {
164
+			regulator-min-microvolt = <1800000>;
165
+			regulator-max-microvolt = <1800000>;
166
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
167
+		};
168
+
169
+		vreg_l8a_1p2: ldo8 {
170
+			regulator-min-microvolt = <1200000>;
171
+			regulator-max-microvolt = <1248000>;
172
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
173
+		};
174
+
175
+		vreg_l9a_1p8: ldo9 {
176
+			regulator-min-microvolt = <1704000>;
177
+			regulator-max-microvolt = <2928000>;
178
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
179
+		};
180
+
181
+		vreg_l10a_1p8: ldo10 {
182
+			regulator-min-microvolt = <1704000>;
183
+			regulator-max-microvolt = <2928000>;
184
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
185
+		};
186
+
187
+		vreg_l11a_1p0: ldo11 {
188
+			regulator-min-microvolt = <1000000>;
189
+			regulator-max-microvolt = <1048000>;
190
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
191
+		};
192
+
193
+		vdd_qfprom:
194
+		vdd_qfprom_sp:
195
+		vdda_apc1_cs_1p8:
196
+		vdda_gfx_cs_1p8:
197
+		vdda_qrefs_1p8:
198
+		vdda_qusb_hs0_1p8:
199
+		vddpx_11:
200
+		vreg_l12a_1p8: ldo12 {
201
+			regulator-min-microvolt = <1800000>;
202
+			regulator-max-microvolt = <1800000>;
203
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
204
+		};
205
+
206
+		vddpx_2:
207
+		vreg_l13a_2p95: ldo13 {
208
+			regulator-min-microvolt = <1800000>;
209
+			regulator-max-microvolt = <2960000>;
210
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
211
+		};
212
+
213
+		vreg_l14a_1p88: ldo14 {
214
+			regulator-min-microvolt = <1800000>;
215
+			regulator-max-microvolt = <1800000>;
216
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
217
+		};
218
+
219
+		vreg_l15a_1p8: ldo15 {
220
+			regulator-min-microvolt = <1800000>;
221
+			regulator-max-microvolt = <1800000>;
222
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
223
+		};
224
+
225
+		vreg_l16a_2p7: ldo16 {
226
+			regulator-min-microvolt = <2704000>;
227
+			regulator-max-microvolt = <2704000>;
228
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
229
+		};
230
+
231
+		vreg_l17a_1p3: ldo17 {
232
+			regulator-min-microvolt = <1304000>;
233
+			regulator-max-microvolt = <1304000>;
234
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
235
+		};
236
+
237
+		vreg_l18a_2p7: ldo18 {
238
+			regulator-min-microvolt = <2704000>;
239
+			regulator-max-microvolt = <2960000>;
240
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
241
+		};
242
+
243
+		vreg_l19a_3p0: ldo19 {
244
+			regulator-min-microvolt = <2856000>;
245
+			regulator-max-microvolt = <3104000>;
246
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
247
+		};
248
+
249
+		vreg_l20a_2p95: ldo20 {
250
+			regulator-min-microvolt = <2704000>;
251
+			regulator-max-microvolt = <2960000>;
252
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
253
+		};
254
+
255
+		vreg_l21a_2p95: ldo21 {
256
+			regulator-min-microvolt = <2704000>;
257
+			regulator-max-microvolt = <2960000>;
258
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
259
+		};
260
+
261
+		vreg_l22a_2p85: ldo22 {
262
+			regulator-min-microvolt = <2864000>;
263
+			regulator-max-microvolt = <3312000>;
264
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
265
+		};
266
+
267
+		vreg_l23a_3p3: ldo23 {
268
+			regulator-min-microvolt = <3000000>;
269
+			regulator-max-microvolt = <3312000>;
270
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
271
+		};
272
+
273
+		vdda_qusb_hs0_3p1:
274
+		vreg_l24a_3p075: ldo24 {
275
+			regulator-min-microvolt = <3088000>;
276
+			regulator-max-microvolt = <3088000>;
277
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
278
+		};
279
+
280
+		vreg_l25a_3p3: ldo25 {
281
+			regulator-min-microvolt = <3300000>;
282
+			regulator-max-microvolt = <3312000>;
283
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
284
+		};
285
+
286
+		vdda_hp_pcie_1p2:
287
+		vdda_hv_ebi0:
288
+		vdda_hv_ebi1:
289
+		vdda_hv_ebi2:
290
+		vdda_hv_ebi3:
291
+		vdda_mipi_csi_1p25:
292
+		vdda_mipi_dsi0_1p2:
293
+		vdda_mipi_dsi1_1p2:
294
+		vdda_pcie_1p2:
295
+		vdda_ufs1_1p2:
296
+		vdda_ufs2_1p2:
297
+		vdda_usb1_ss_1p2:
298
+		vdda_usb2_ss_1p2:
299
+		vreg_l26a_1p2: ldo26 {
300
+			regulator-min-microvolt = <1200000>;
301
+			regulator-max-microvolt = <1200000>;
302
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
303
+		};
304
+
305
+		vreg_l28a_3p0: ldo28 {
306
+			regulator-min-microvolt = <2856000>;
307
+			regulator-max-microvolt = <3008000>;
308
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
309
+		};
310
+
311
+		vreg_lvs1a_1p8: lvs1 {
312
+			regulator-min-microvolt = <1800000>;
313
+			regulator-max-microvolt = <1800000>;
314
+		};
315
+
316
+		vreg_lvs2a_1p8: lvs2 {
317
+			regulator-min-microvolt = <1800000>;
318
+			regulator-max-microvolt = <1800000>;
319
+		};
320
+	};
321
+
322
+	pmi8998-rpmh-regulators {
323
+		compatible = "qcom,pmi8998-rpmh-regulators";
324
+		qcom,pmic-id = "b";
325
+
326
+		vdd-bob-supply = <&vph_pwr>;
327
+
328
+		vreg_bob: bob {
329
+			regulator-min-microvolt = <3312000>;
330
+			regulator-max-microvolt = <3600000>;
331
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_AUTO>;
332
+			regulator-allow-bypass;
333
+		};
334
+	};
335
+
336
+	pm8005-rpmh-regulators {
337
+		compatible = "qcom,pm8005-rpmh-regulators";
338
+		qcom,pmic-id = "c";
339
+
340
+		vdd-s1-supply = <&vph_pwr>;
341
+		vdd-s2-supply = <&vph_pwr>;
342
+		vdd-s3-supply = <&vph_pwr>;
343
+		vdd-s4-supply = <&vph_pwr>;
344
+
345
+		vreg_s3c_0p6: smps3 {
346
+			regulator-min-microvolt = <600000>;
347
+			regulator-max-microvolt = <600000>;
348
+		};
349
+	};
350
+};
351
+
352
+&cdsp_pas {
353
+	status = "okay";
354
+	firmware-name = "qcom/sdm845/cdsp.mdt";
355
+};
356
+
357
+&dsi0 {
358
+	status = "okay";
359
+	vdda-supply = <&vdda_mipi_dsi0_1p2>;
360
+
361
+	qcom,dual-dsi-mode;
362
+	qcom,master-dsi;
363
+
364
+	#address-cells = <1>;
365
+	#size-cells = <0>;
366
+
367
+	ports {
368
+		port@1 {
369
+			endpoint {
370
+				remote-endpoint = <&truly_in_0>;
371
+				data-lanes = <0 1 2 3>;
372
+			};
373
+		};
374
+	};
375
+
376
+	panel@0 {
377
+		compatible = "truly,nt35597-2K-display";
378
+		reg = <0>;
379
+		vdda-supply = <&vreg_l14a_1p88>;
380
+
381
+		reset-gpios = <&tlmm 6 GPIO_ACTIVE_LOW>;
382
+		mode-gpios = <&tlmm 52 GPIO_ACTIVE_HIGH>;
383
+
384
+		ports {
385
+			#address-cells = <1>;
386
+			#size-cells = <0>;
387
+
388
+			port@0 {
389
+				reg = <0>;
390
+				truly_in_0: endpoint {
391
+					remote-endpoint = <&dsi0_out>;
392
+				};
393
+			};
394
+
395
+			port@1 {
396
+				reg = <1>;
397
+				truly_in_1: endpoint {
398
+					remote-endpoint = <&dsi1_out>;
399
+				};
400
+			};
401
+		};
402
+	};
403
+};
404
+
405
+&dsi0_phy {
406
+	status = "okay";
407
+	vdds-supply = <&vdda_mipi_dsi0_pll>;
408
+};
409
+
410
+&dsi1 {
411
+	status = "okay";
412
+	vdda-supply = <&vdda_mipi_dsi1_1p2>;
413
+
414
+	qcom,dual-dsi-mode;
415
+
416
+	ports {
417
+		port@1 {
418
+			endpoint {
419
+				remote-endpoint = <&truly_in_1>;
420
+				data-lanes = <0 1 2 3>;
421
+			};
422
+		};
423
+	};
424
+};
425
+
426
+&dsi1_phy {
427
+	status = "okay";
428
+	vdds-supply = <&vdda_mipi_dsi1_pll>;
429
+};
430
+
431
+&gcc {
432
+	protected-clocks = <GCC_QSPI_CORE_CLK>,
433
+			   <GCC_QSPI_CORE_CLK_SRC>,
434
+			   <GCC_QSPI_CNOC_PERIPH_AHB_CLK>,
435
+			   <GCC_LPASS_Q6_AXI_CLK>,
436
+			   <GCC_LPASS_SWAY_CLK>;
437
+};
438
+
439
+&gpu {
440
+	zap-shader {
441
+		memory-region = <&gpu_mem>;
442
+		firmware-name = "qcom/sdm845/a630_zap.mbn";
443
+	};
23444 };
24445 
25446 &i2c10 {
....@@ -27,16 +448,122 @@
27448 	clock-frequency = <400000>;
28449 };
29450 
451
+&mdss {
452
+	status = "okay";
453
+};
454
+
455
+&mdss_mdp {
456
+	status = "okay";
457
+};
458
+
459
+&mss_pil {
460
+	status = "okay";
461
+	firmware-name = "qcom/sdm845/mba.mbn", "qcom/sdm845/modem.mbn";
462
+};
463
+
30464 &qupv3_id_1 {
31465 	status = "okay";
32466 };
33467 
34
-&tlmm {
35
-	gpio-reserved-ranges = <0 4>, <81 4>;
468
+&sdhc_2 {
469
+	status = "okay";
470
+
471
+	pinctrl-names = "default";
472
+	pinctrl-0 = <&sdc2_clk &sdc2_cmd &sdc2_data &sd_card_det_n>;
473
+
474
+	vmmc-supply = <&vreg_l21a_2p95>;
475
+	vqmmc-supply = <&vddpx_2>;
476
+
477
+	cd-gpios = <&tlmm 126 GPIO_ACTIVE_LOW>;
36478 };
37479 
38480 &uart9 {
39481 	status = "okay";
482
+};
483
+
484
+&ufs_mem_hc {
485
+	status = "okay";
486
+
487
+	reset-gpios = <&tlmm 150 GPIO_ACTIVE_LOW>;
488
+
489
+	vcc-supply = <&vreg_l20a_2p95>;
490
+	vcc-max-microamp = <600000>;
491
+};
492
+
493
+&ufs_mem_phy {
494
+	status = "okay";
495
+
496
+	vdda-phy-supply = <&vdda_ufs1_core>;
497
+	vdda-pll-supply = <&vdda_ufs1_1p2>;
498
+};
499
+
500
+&usb_1 {
501
+	status = "okay";
502
+};
503
+
504
+&usb_1_dwc3 {
505
+	/* Until we have Type C hooked up we'll force this as peripheral. */
506
+	dr_mode = "peripheral";
507
+};
508
+
509
+&usb_1_hsphy {
510
+	status = "okay";
511
+
512
+	vdd-supply = <&vdda_usb1_ss_core>;
513
+	vdda-pll-supply = <&vdda_qusb_hs0_1p8>;
514
+	vdda-phy-dpdm-supply = <&vdda_qusb_hs0_3p1>;
515
+
516
+	qcom,imp-res-offset-value = <8>;
517
+	qcom,hstx-trim-value = <QUSB2_V2_HSTX_TRIM_21_6_MA>;
518
+	qcom,preemphasis-level = <QUSB2_V2_PREEMPHASIS_5_PERCENT>;
519
+	qcom,preemphasis-width = <QUSB2_V2_PREEMPHASIS_WIDTH_HALF_BIT>;
520
+};
521
+
522
+&usb_1_qmpphy {
523
+	status = "okay";
524
+
525
+	vdda-phy-supply = <&vdda_usb1_ss_1p2>;
526
+	vdda-pll-supply = <&vdda_usb1_ss_core>;
527
+};
528
+
529
+&usb_2 {
530
+	status = "okay";
531
+};
532
+
533
+&usb_2_dwc3 {
534
+	/*
535
+	 * Though the USB block on SDM845 can support host, there's no vbus
536
+	 * signal for this port on MTP.  Thus (unless you have a non-compliant
537
+	 * hub that works without vbus) the only sensible thing is to force
538
+	 * peripheral mode.
539
+	 */
540
+	dr_mode = "peripheral";
541
+};
542
+
543
+&usb_2_hsphy {
544
+	status = "okay";
545
+
546
+	vdd-supply = <&vdda_usb2_ss_core>;
547
+	vdda-pll-supply = <&vdda_qusb_hs0_1p8>;
548
+	vdda-phy-dpdm-supply = <&vdda_qusb_hs0_3p1>;
549
+
550
+	qcom,imp-res-offset-value = <8>;
551
+	qcom,hstx-trim-value = <QUSB2_V2_HSTX_TRIM_22_8_MA>;
552
+};
553
+
554
+&usb_2_qmpphy {
555
+	status = "okay";
556
+
557
+	vdda-phy-supply = <&vdda_usb2_ss_1p2>;
558
+	vdda-pll-supply = <&vdda_usb2_ss_core>;
559
+};
560
+
561
+&wifi {
562
+	status = "okay";
563
+	vdd-0.8-cx-mx-supply = <&vreg_l5a_0p8>;
564
+	vdd-1.8-xo-supply = <&vreg_l7a_1p8>;
565
+	vdd-1.3-rfa-supply = <&vreg_l17a_1p3>;
566
+	vdd-3.3-ch0-supply = <&vreg_l25a_3p3>;
40567 };
41568 
42569 /* PINCTRL - additions to nodes defined in sdm845.dtsi */
....@@ -62,3 +589,48 @@
62589 		bias-pull-up;
63590 	};
64591 };
592
+
593
+&tlmm {
594
+	gpio-reserved-ranges = <0 4>, <81 4>;
595
+
596
+	sdc2_clk: sdc2-clk {
597
+		pinconf {
598
+			pins = "sdc2_clk";
599
+			bias-disable;
600
+
601
+			/*
602
+			 * It seems that mmc_test reports errors if drive
603
+			 * strength is not 16 on clk, cmd, and data pins.
604
+			 */
605
+			drive-strength = <16>;
606
+		};
607
+	};
608
+
609
+	sdc2_cmd: sdc2-cmd {
610
+		pinconf {
611
+			pins = "sdc2_cmd";
612
+			bias-pull-up;
613
+			drive-strength = <16>;
614
+		};
615
+	};
616
+
617
+	sdc2_data: sdc2-data {
618
+		pinconf {
619
+			pins = "sdc2_data";
620
+			bias-pull-up;
621
+			drive-strength = <16>;
622
+		};
623
+	};
624
+
625
+	sd_card_det_n: sd-card-det-n {
626
+		pinmux {
627
+			pins = "gpio126";
628
+			function = "gpio";
629
+		};
630
+
631
+		pinconf {
632
+			pins = "gpio126";
633
+			bias-pull-up;
634
+		};
635
+	};
636
+};