~hc/RK356X_SDK_RELEASE.git

..	..	@@ -1,44 +1,5 @@
1		-/*
2		- * Copyright (C) 2017 Jagan Teki <jteki@openedev.com>
3		- *
4		- * This file is dual-licensed: you can use it either under the terms
5		- * of the GPL or the X11 license, at your option. Note that this dual
6		- * licensing only applies to this file, and not this project as a
7		- * whole.
8		- *
9		- * a) This library is free software; you can redistribute it and/or
10		- * modify it under the terms of the GNU General Public License as
11		- * published by the Free Software Foundation; either version 2 of the
12		- * License, or (at your option) any later version.
13		- *
14		- * This library is distributed in the hope that it will be useful,
15		- * but WITHOUT ANY WARRANTY; without even the implied warranty of
16		- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
17		- * GNU General Public License for more details.
18		- *
19		- * Or, alternatively,
20		- *
21		- * b) Permission is hereby granted, free of charge, to any person
22		- * obtaining a copy of this software and associated documentation
23		- * files (the "Software"), to deal in the Software without
24		- * restriction, including without limitation the rights to use,
25		- * copy, modify, merge, publish, distribute, sublicense, and/or
26		- * sell copies of the Software, and to permit persons to whom the
27		- * Software is furnished to do so, subject to the following
28		- * conditions:
29		- *
30		- * The above copyright notice and this permission notice shall be
31		- * included in all copies or substantial portions of the Software.
32		- *
33		- * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
34		- * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
35		- * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
36		- * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
37		- * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
38		- * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
39		- * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
40		- * OTHER DEALINGS IN THE SOFTWARE.
41		- */
	1	+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
	2	+// Copyright (C) 2017 Jagan Teki <jteki@openedev.com>
42	3
43	4	/dts-v1/;
44	5
..	..	@@ -69,6 +30,21 @@
69	30	};
70	31	};
71	32
	33	+ leds {
	34	+ compatible = "gpio-leds";
	35	+
	36	+ pwr {
	37	+ label = "orangepi:green:pwr";
	38	+ gpios = <&r_pio 0 10 GPIO_ACTIVE_HIGH>;
	39	+ default-state = "on";
	40	+ };
	41	+
	42	+ status {
	43	+ label = "orangepi:red:status";
	44	+ gpios = <&pio 0 17 GPIO_ACTIVE_HIGH>;
	45	+ };
	46	+ };
	47	+
72	48	reg_vcc3v3: vcc3v3 {
73	49	compatible = "regulator-fixed";
74	50	regulator-name = "vcc3v3";
..	..	@@ -78,13 +54,16 @@
78	54
79	55	wifi_pwrseq: wifi_pwrseq {
80	56	compatible = "mmc-pwrseq-simple";
81		- pinctrl-names = "default";
82	57	reset-gpios = <&pio 0 9 GPIO_ACTIVE_LOW>; /* PA9 */
83	58	post-power-on-delay-ms = <200>;
84	59	};
85	60	};
86	61
87	62	&de {
	63	+ status = "okay";
	64	+};
	65	+
	66	+&ehci0 {
88	67	status = "okay";
89	68	};
90	69
..	..	@@ -132,9 +111,13 @@
132	111	status = "okay";
133	112	};
134	113
	114	+&ohci0 {
	115	+ status = "okay";
	116	+};
	117	+
135	118	&uart0 {
136	119	pinctrl-names = "default";
137		- pinctrl-0 = <&uart0_pins_a>;
	120	+ pinctrl-0 = <&uart0_pa_pins>;
138	121	status = "okay";
139	122	};
140	123
..	..	@@ -143,3 +126,18 @@
143	126	pinctrl-0 = <&uart1_pins>, <&uart1_rts_cts_pins>;
144	127	status = "okay";
145	128	};
	129	+
	130	+&usb_otg {
	131	+ /*
	132	+ * According to schematics CN1 MicroUSB port can be used to take
	133	+ * external 5V to power up the board VBUS. On the contrary CN1 MicroUSB
	134	+ * port cannot provide power externally even if the board is powered
	135	+ * via GPIO pins. It thus makes sense to force peripheral mode.
	136	+ */
	137	+ dr_mode = "peripheral";
	138	+ status = "okay";
	139	+};
	140	+
	141	+&usbphy {
	142	+ status = "okay";
	143	+};