forked from ~ljy/RK356X_SDK_RELEASE

blame | history | patch | commit | commitdiff
hc
2024-10-22 8ac6c7a54ed1b98d142dce24b11c6de6a1e239a5 
 kernel/arch/arm/boot/dts/am437x-sk-evm.dts
....@@ -1,9 +1,6 @@
1
+// SPDX-License-Identifier: GPL-2.0-only
12 /*
2
- * Copyright (C) 2014 Texas Instruments Incorporated - http://www.ti.com/
3
- *
4
- * This program is free software; you can redistribute it and/or modify
5
- * it under the terms of the GNU General Public License version 2 as
6
- * published by the Free Software Foundation.
3
+ * Copyright (C) 2014 Texas Instruments Incorporated - https://www.ti.com/
74  */
85 
96 /* AM437x SK EVM */
....@@ -137,22 +134,6 @@
137134 
138135 		enable-gpios = <&gpio1 7 GPIO_ACTIVE_HIGH>;
139136 
140
-		panel-timing {
141
-			clock-frequency = <9000000>;
142
-			hactive = <480>;
143
-			vactive = <272>;
144
-			hfront-porch = <2>;
145
-			hback-porch = <2>;
146
-			hsync-len = <41>;
147
-			vfront-porch = <2>;
148
-			vback-porch = <2>;
149
-			vsync-len = <10>;
150
-			hsync-active = <0>;
151
-			vsync-active = <0>;
152
-			de-active = <1>;
153
-			pixelclk-active = <1>;
154
-		};
155
-
156137 		port {
157138 			lcd_in: endpoint {
158139 				remote-endpoint = <&dpi_out>;
....@@ -272,6 +253,12 @@
272253 			AM4372_IOPAD(0xa1c, DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE7)
273254 			AM4372_IOPAD(0xa20, DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE7)
274255 			AM4372_IOPAD(0xa24, DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE7)
256
+		>;
257
+	};
258
+
259
+	clkout1_pin: pinmux_clkout1_pin {
260
+		pinctrl-single,pins = <
261
+			0x270 (PIN_OUTPUT_PULLDOWN | MUX_MODE3)	/* XDMA_EVENT_INTR0/CLKOUT1 */
275262 		>;
276263 	};
277264 
....@@ -596,6 +583,25 @@
596583 	pinctrl-0 = <&i2c1_pins>;
597584 	clock-frequency = <400000>;
598585 
586
+	ov2659@30 {
587
+		compatible = "ovti,ov2659";
588
+		reg = <0x30>;
589
+		pinctrl-names = "default";
590
+		pinctrl-0 = <&clkout1_pin>;
591
+
592
+		clocks = <&clkout1_mux_ck>;
593
+		clock-names = "xvclk";
594
+		assigned-clocks = <&clkout1_mux_ck>;
595
+		assigned-clock-parents = <&clkout1_osc_div_ck>;
596
+
597
+		port {
598
+			ov2659_1: endpoint {
599
+				remote-endpoint = <&vpfe0_ep>;
600
+				link-frequencies = /bits/ 64 <70000000>;
601
+			};
602
+		};
603
+	};
604
+
599605 	edt-ft5306@38 {
600606 		status = "okay";
601607 		compatible = "edt,edt-ft5306", "edt,edt-ft5x06";
....@@ -697,7 +703,7 @@
697703 	pinctrl-1 = <&mmc3_pins_sleep>;
698704 	cap-power-off-card;
699705 	keep-power-in-suspend;
700
-	ti,non-removable;
706
+	non-removable;
701707 
702708 	#address-cells = <1>;
703709 	#size-cells = <0>;
....@@ -786,31 +792,37 @@
786792 	};
787793 };
788794 
789
-&mac {
795
+&mac_sw {
790796 	pinctrl-names = "default", "sleep";
791797 	pinctrl-0 = <&cpsw_default>;
792798 	pinctrl-1 = <&cpsw_sleep>;
793
-	dual_emac = <1>;
794799 	status = "okay";
795800 };
796801 
797
-&davinci_mdio {
802
+&davinci_mdio_sw {
798803 	pinctrl-names = "default", "sleep";
799804 	pinctrl-0 = <&davinci_mdio_default>;
800805 	pinctrl-1 = <&davinci_mdio_sleep>;
801
-	status = "okay";
806
+
807
+	ethphy0: ethernet-phy@4 {
808
+		reg = <4>;
809
+	};
810
+
811
+	ethphy1: ethernet-phy@5 {
812
+		reg = <5>;
813
+	};
802814 };
803815 
804
-&cpsw_emac0 {
805
-	phy_id = <&davinci_mdio>, <4>;
806
-	phy-mode = "rgmii";
807
-	dual_emac_res_vlan = <1>;
816
+&cpsw_port1 {
817
+	phy-handle = <&ethphy0>;
818
+	phy-mode = "rgmii-rxid";
819
+	ti,dual-emac-pvid = <1>;
808820 };
809821 
810
-&cpsw_emac1 {
811
-	phy_id = <&davinci_mdio>, <5>;
812
-	phy-mode = "rgmii";
813
-	dual_emac_res_vlan = <2>;
822
+&cpsw_port2 {
823
+	phy-handle = <&ethphy1>;
824
+	phy-mode = "rgmii-rxid";
825
+	ti,dual-emac-pvid = <2>;
814826 };
815827 
816828 &elm {
....@@ -872,7 +884,7 @@
872884 	/* Camera port */
873885 	port {
874886 		vpfe0_ep: endpoint {
875
-			/* remote-endpoint = <&sensor>; add once we have it */
887
+			remote-endpoint = <&ov2659_1>;
876888 			ti,am437x-vpfe-interface = <0>;
877889 			bus-width = <8>;
878890 			hsync-active = <0>;