修改4g拨号为QMI,需要在系统里后台执行quectel-CM

hc

2024-10-22 8ac6c7a54ed1b98d142dce24b11c6de6a1e239a5

 kernel/Documentation/devicetree/bindings/spi/fsl-spi.txt
..
..
@@ -15,9 +15,13 @@
15
15
 - clock-frequency : input clock frequency to non FSL_SOC cores
16
16
 
17
17
 Optional properties:
18
-- gpios : specifies the gpio pins to be used for chipselects.
18
+- cs-gpios : specifies the gpio pins to be used for chipselects.
19
19
   The gpios will be referred to as reg = <index> in the SPI child nodes.
20
20
   If unspecified, a single SPI device without a chip select can be used.
21
+- fsl,spisel_boot : for the MPC8306 and MPC8309, specifies that the
22
+  SPISEL_BOOT signal is used as chip select for a slave device. Use
23
+  reg = <number of gpios> in the corresponding child node, i.e. 0 if
24
+  the cs-gpios property is not present.
21
25
 
22
26
 Example:
23
27
 	spi@4c0 {
..
..
@@ -27,8 +31,8 @@
27
31
 		interrupts = <82 0>;
28
32
 		interrupt-parent = <700>;
29
33
 		mode = "cpu";
30
-		gpios = <&gpio 18 1	// device reg=<0>
31
-			 &gpio 19 1>;	// device reg=<1>
34
+		cs-gpios = <&gpio 18 1		// device reg=<0>
35
+			    &gpio 19 1>;	// device reg=<1>
32
36
 	};
33
37
 
34
38