修改4g拨号为QMI,需要在系统里后台执行quectel-CM

hc

2024-10-22 8ac6c7a54ed1b98d142dce24b11c6de6a1e239a5

 kernel/Documentation/devicetree/bindings/sound/fsl-sai.txt
..
..
@@ -8,7 +8,9 @@
8
8
 Required properties:
9
9
 
10
10
   - compatible		: Compatible list, contains "fsl,vf610-sai",
11
-			  "fsl,imx6sx-sai" or "fsl,imx6ul-sai"
11
+			  "fsl,imx6sx-sai", "fsl,imx6ul-sai",
12
+			  "fsl,imx7ulp-sai", "fsl,imx8mq-sai" or
13
+			  "fsl,imx8qm-sai".
12
14
 
13
15
   - reg			: Offset and length of the register set for the device.
14
16
 
..
..
@@ -35,13 +37,13 @@
35
37
 
36
38
   - fsl,sai-synchronous-rx: This is a boolean property. If present, indicating
37
39
 			  that SAI will work in the synchronous mode (sync Tx
38
-			  with Rx) which means both the transimitter and the
40
+			  with Rx) which means both the transmitter and the
39
41
 			  receiver will send and receive data by following
40
42
 			  receiver's bit clocks and frame sync clocks.
41
43
 
42
44
   - fsl,sai-asynchronous: This is a boolean property. If present, indicating
43
45
 			  that SAI will work in the asynchronous mode, which
44
-			  means both transimitter and receiver will send and
46
+			  means both transmitter and receiver will send and
45
47
 			  receive data by following their own bit clocks and
46
48
 			  frame sync clocks separately.
47
49
 
..
..
@@ -58,8 +60,8 @@
58
60
 Note:
59
61
 - If both fsl,sai-asynchronous and fsl,sai-synchronous-rx are absent, the
60
62
   default synchronous mode (sync Rx with Tx) will be used, which means both
61
-  transimitter and receiver will send and receive data by following clocks
62
-  of transimitter.
63
+  transmitter and receiver will send and receive data by following clocks
64
+  of transmitter.
63
65
 - fsl,sai-asynchronous and fsl,sai-synchronous-rx are exclusive.
64
66
 
65
67
 Example: