~hc/RK356X_SDK_RELEASE.git

..	..	@@ -3,24 +3,32 @@
3	3
4	4	Required properties :
5	5	- compatible : "charger-manager"
6		- - <>-supply : for regulator consumer
7		- - cm-num-chargers : number of chargers
	6	+ - <>-supply : for regulator consumer, named according to cm-regulator-name
8	7	- cm-chargers : name of chargers
9	8	- cm-fuel-gauge : name of battery fuel gauge
10	9	- subnode <regulator> :
11	10	- cm-regulator-name : name of charger regulator
12	11	- subnode <cable> :
13		- - cm-cable-name : name of charger cable
	12	+ - cm-cable-name : name of charger cable - one of USB, USB-HOST,
	13	+ SDP, DCP, CDP, ACA, FAST-CHARGER, SLOW-CHARGER, WPT,
	14	+ PD, DOCK, JIG, or MECHANICAL
14	15	- cm-cable-extcon : name of extcon dev
15	16	(optional) - cm-cable-min : minimum current of cable
16	17	(optional) - cm-cable-max : maximum current of cable
17	18
18	19	Optional properties :
19	20	- cm-name : charger manager's name (default : "battery")
20		- - cm-poll-mode : polling mode (enum polling_modes)
21		- - cm-poll-interval : polling interval
22		- - cm-battery-stat : battery status (enum data_source)
23		- - cm-fullbatt-* : data for full battery checking
	21	+ - cm-poll-mode : polling mode - 0 for disabled, 1 for always, 2 for when
	22	+ external power is connected, or 3 for when charging. If not present,
	23	+ then polling is disabled
	24	+ - cm-poll-interval : polling interval (in ms)
	25	+ - cm-battery-stat : battery status - 0 for battery always present, 1 for no
	26	+ battery, 2 to check presence via fuel gauge, or 3 to check presence
	27	+ via charger
	28	+ - cm-fullbatt-vchkdrop-volt : voltage drop (in uV) before restarting charging
	29	+ - cm-fullbatt-voltage : voltage (in uV) of full battery
	30	+ - cm-fullbatt-soc : state of charge to consider as full battery
	31	+ - cm-fullbatt-capacity : capcity (in uAh) to consider as full battery
24	32	- cm-thermal-zone : name of external thermometer's thermal zone
25	33	- cm-battery-* : threshold battery temperature for charging
26	34	-cold : critical cold temperature of battery for charging
..	..	@@ -28,6 +36,10 @@
28	36	-hot : critical hot temperature of battery for charging
29	37	-temp-diff : temperature difference to allow recharging
30	38	- cm-dis/charging-max = limits of charging duration
	39	+
	40	+Deprecated properties:
	41	+ - cm-num-chargers
	42	+ - cm-fullbatt-vchkdrop-ms
31	43
32	44	Example :
33	45	charger-manager@0 {
..	..	@@ -39,13 +51,11 @@
39	51	cm-poll-mode = <1>;
40	52	cm-poll-interval = <30000>;
41	53
42		- cm-fullbatt-vchkdrop-ms = <30000>;
43	54	cm-fullbatt-vchkdrop-volt = <150000>;
44	55	cm-fullbatt-soc = <100>;
45	56
46	57	cm-battery-stat = <3>;
47	58
48		- cm-num-chargers = <3>;
49	59	cm-chargers = "charger0", "charger1", "charger2";
50	60
51	61	cm-fuel-gauge = "fuelgauge0";
..	..	@@ -71,7 +81,7 @@
71	81	cm-cable-max = <500000>;
72	82	};
73	83	cable@1 {
74		- cm-cable-name = "TA";
	84	+ cm-cable-name = "SDP";
75	85	cm-cable-extcon = "extcon-dev.0";
76	86	cm-cable-min = <650000>;
77	87	cm-cable-max = <675000>;