修改4g拨号为QMI,需要在系统里后台执行quectel-CM

hc

2024-10-22 8ac6c7a54ed1b98d142dce24b11c6de6a1e239a5

 kernel/Documentation/devicetree/bindings/pinctrl/samsung-pinctrl.txt
..
..
@@ -65,7 +65,7 @@
65
65
 
66
66
 - Pin mux/config groups as child nodes: The pin mux (selecting pin function
67
67
   mode) and pin config (pull up/down, driver strength) settings are represented
68
-  as child nodes of the pin-controller node. There should be atleast one
68
+  as child nodes of the pin-controller node. There should be at least one
69
69
   child node and there is no limit on the count of these child nodes. It is
70
70
   also possible for a child node to consist of several further child nodes
71
71
   to allow grouping multiple pinctrl groups into one. The format of second
..
..
@@ -75,7 +75,7 @@
75
75
   The child node should contain a list of pin(s) on which a particular pin
76
76
   function selection or pin configuration (or both) have to applied. This
77
77
   list of pins is specified using the property name "samsung,pins". There
78
-  should be atleast one pin specfied for this property and there is no upper
78
+  should be at least one pin specified for this property and there is no upper
79
79
   limit on the count of pins that can be specified. The pins are specified
80
80
   using pin names which are derived from the hardware manual of the SoC. As
81
81
   an example, the pins in GPA0 bank of the pin controller can be represented
..
..
@@ -107,7 +107,7 @@
107
107
   hardware manual and these values are programmed as-is into the pin
108
108
   pull up/down and driver strength register of the pin-controller.
109
109
 
110
-  Note: A child should include atleast a pin function selection property or
110
+  Note: A child should include at least a pin function selection property or
111
111
   pin configuration property (one or more) or both.
112
112
 
113
113
   The client nodes that require a particular pin function selection and/or