修改4g拨号为QMI,需要在系统里后台执行quectel-CM

hc

2024-10-22 8ac6c7a54ed1b98d142dce24b11c6de6a1e239a5

 kernel/Documentation/devicetree/bindings/phy/rcar-gen2-phy.txt
..
..
@@ -4,8 +4,11 @@
4
4
 2 USB PHY contains.
5
5
 
6
6
 Required properties:
7
-- compatible: "renesas,usb-phy-r8a7743" if the device is a part of R8A7743 SoC.
7
+- compatible: "renesas,usb-phy-r8a7742" if the device is a part of R8A7742 SoC.
8
+	      "renesas,usb-phy-r8a7743" if the device is a part of R8A7743 SoC.
9
+	      "renesas,usb-phy-r8a7744" if the device is a part of R8A7744 SoC.
8
10
 	      "renesas,usb-phy-r8a7745" if the device is a part of R8A7745 SoC.
11
+	      "renesas,usb-phy-r8a77470" if the device is a part of R8A77470 SoC.
9
12
 	      "renesas,usb-phy-r8a7790" if the device is a part of R8A7790 SoC.
10
13
 	      "renesas,usb-phy-r8a7791" if the device is a part of R8A7791 SoC.
11
14
 	      "renesas,usb-phy-r8a7794" if the device is a part of R8A7794 SoC.
..
..
@@ -29,7 +32,7 @@
29
32
 - #phy-cells: see phy-bindings.txt in the same directory, must be <1>.
30
33
 
31
34
 The phandle's argument in the PHY specifier is the USB controller selector for
32
-the USB channel; see the selector meanings below:
35
+the USB channel other than r8a77470 SoC; see the selector meanings below:
33
36
 
34
37
 +-----------+---------------+---------------+
35
38
 |\ Selector |               |               |
..
..
@@ -40,6 +43,16 @@
40
43
 | 2         | PCI EHCI/OHCI | xHCI          |
41
44
 +-----------+---------------+---------------+
42
45
 
46
+For r8a77470 SoC;see the selector meaning below:
47
+
48
++-----------+---------------+---------------+
49
+|\ Selector |               |               |
50
++ --------- +       0       |       1       |
51
+| Channel  \|               |               |
52
++-----------+---------------+---------------+
53
+| 0         | EHCI/OHCI     | HS-USB        |
54
++-----------+---------------+---------------+
55
+
43
56
 Example (Lager board):
44
57
 
45
58
 	usb-phy@e6590100 {
..
..
@@ -47,15 +60,53 @@
47
60
 		reg = <0 0xe6590100 0 0x100>;
48
61
 		#address-cells = <1>;
49
62
 		#size-cells = <0>;
50
-		clocks = <&mstp7_clks R8A7790_CLK_HSUSB>;
63
+		clocks = <&cpg CPG_MOD 704>;
51
64
 		clock-names = "usbhs";
65
+		power-domains = <&sysc R8A7790_PD_ALWAYS_ON>;
66
+		resets = <&cpg 704>;
52
67
 
53
-		usb-channel@0 {
68
+		usb0: usb-channel@0 {
54
69
 			reg = <0>;
55
70
 			#phy-cells = <1>;
56
71
 		};
57
-		usb-channel@2 {
72
+		usb2: usb-channel@2 {
58
73
 			reg = <2>;
59
74
 			#phy-cells = <1>;
60
75
 		};
61
76
 	};
77
+
78
+Example (iWave RZ/G1C sbc):
79
+
80
+	usbphy0: usb-phy0@e6590100 {
81
+		compatible = "renesas,usb-phy-r8a77470",
82
+			     "renesas,rcar-gen2-usb-phy";
83
+		reg = <0 0xe6590100 0 0x100>;
84
+		#address-cells = <1>;
85
+		#size-cells = <0>;
86
+		clocks = <&cpg CPG_MOD 704>;
87
+		clock-names = "usbhs";
88
+		power-domains = <&sysc R8A77470_PD_ALWAYS_ON>;
89
+		resets = <&cpg 704>;
90
+
91
+		usb0: usb-channel@0 {
92
+			reg = <0>;
93
+			#phy-cells = <1>;
94
+		};
95
+	};
96
+
97
+	usbphy1: usb-phy@e6598100 {
98
+		compatible = "renesas,usb-phy-r8a77470",
99
+			     "renesas,rcar-gen2-usb-phy";
100
+		reg = <0 0xe6598100 0 0x100>;
101
+		#address-cells = <1>;
102
+		#size-cells = <0>;
103
+		clocks = <&cpg CPG_MOD 706>;
104
+		clock-names = "usbhs";
105
+		power-domains = <&sysc R8A77470_PD_ALWAYS_ON>;
106
+		resets = <&cpg 706>;
107
+
108
+		usb1: usb-channel@0 {
109
+			reg = <0>;
110
+			#phy-cells = <1>;
111
+		};
112
+	};