forked from ~ljy/RK356X_SDK_RELEASE
blame | history | patch | commit | commitdiff
hc
2024-10-22 8ac6c7a54ed1b98d142dce24b11c6de6a1e239a5 
 kernel/Documentation/devicetree/bindings/net/dsa/ksz.txt
....@@ -5,8 +5,23 @@
55 
66 - compatible: For external switch chips, compatible string must be exactly one
77   of the following:
8
+  - "microchip,ksz8765"
9
+  - "microchip,ksz8794"
10
+  - "microchip,ksz8795"
811   - "microchip,ksz9477"
912   - "microchip,ksz9897"
13
+  - "microchip,ksz9896"
14
+  - "microchip,ksz9567"
15
+  - "microchip,ksz8565"
16
+  - "microchip,ksz9893"
17
+  - "microchip,ksz9563"
18
+  - "microchip,ksz8563"
19
+
20
+Optional properties:
21
+
22
+- reset-gpios		: Should be a gpio specifier for a reset line
23
+- microchip,synclko-125 : Set if the output SYNCLKO frequency should be set to
24
+			  125MHz instead of 25MHz.
1025 
1126 See Documentation/devicetree/bindings/net/dsa/dsa.txt for a list of additional
1227 required and optional properties.
....@@ -15,58 +30,96 @@
1530 
1631 Ethernet switch connected via SPI to the host, CPU port wired to eth0:
1732 
18
-                             eth0: ethernet@10001000 {
19
-                                             fixed-link {
20
-                                                             speed = <1000>;
21
-                                                             full-duplex;
22
-                                             };
23
-                             };
33
+	eth0: ethernet@10001000 {
34
+		fixed-link {
35
+			speed = <1000>;
36
+			full-duplex;
37
+		};
38
+	};
2439 
25
-                             spi1: spi@f8008000 {
26
-                                             pinctrl-0 = <&pinctrl_spi_ksz>;
27
-                                             cs-gpios = <&pioC 25 0>;
28
-                                             id = <1>;
40
+	spi1: spi@f8008000 {
41
+		pinctrl-0 = <&pinctrl_spi_ksz>;
42
+		cs-gpios = <&pioC 25 0>;
43
+		id = <1>;
2944 
30
-                                             ksz9477: ksz9477@0 {
31
-                                                             compatible = "microchip,ksz9477";
32
-                                                             reg = <0>;
45
+		ksz9477: ksz9477@0 {
46
+			compatible = "microchip,ksz9477";
47
+			reg = <0>;
3348 
34
-                                                             spi-max-frequency = <44000000>;
35
-                                                             spi-cpha;
36
-                                                             spi-cpol;
49
+			spi-max-frequency = <44000000>;
50
+			spi-cpha;
51
+			spi-cpol;
3752 
38
-                                                             ports {
39
-                                                                             #address-cells = <1>;
40
-                                                                             #size-cells = <0>;
41
-                                                                             port@0 {
42
-                                                                                             reg = <0>;
43
-                                                                                             label = "lan1";
44
-                                                                             };
45
-                                                                             port@1 {
46
-                                                                                             reg = <1>;
47
-                                                                                             label = "lan2";
48
-                                                                             };
49
-                                                                             port@2 {
50
-                                                                                             reg = <2>;
51
-                                                                                             label = "lan3";
52
-                                                                             };
53
-                                                                             port@3 {
54
-                                                                                             reg = <3>;
55
-                                                                                             label = "lan4";
56
-                                                                             };
57
-                                                                             port@4 {
58
-                                                                                             reg = <4>;
59
-                                                                                             label = "lan5";
60
-                                                                             };
61
-                                                                             port@5 {
62
-                                                                                             reg = <5>;
63
-                                                                                             label = "cpu";
64
-                                                                                             ethernet = <&eth0>;
65
-                                                                                             fixed-link {
66
-                                                                                                             speed = <1000>;
67
-                                                                                                             full-duplex;
68
-                                                                                             };
69
-                                                                             };
70
-                                                             };
71
-                                             };
72
-                             };
53
+			ports {
54
+				#address-cells = <1>;
55
+				#size-cells = <0>;
56
+				port@0 {
57
+					reg = <0>;
58
+					label = "lan1";
59
+				};
60
+				port@1 {
61
+					reg = <1>;
62
+					label = "lan2";
63
+				};
64
+				port@2 {
65
+					reg = <2>;
66
+					label = "lan3";
67
+				};
68
+				port@3 {
69
+					reg = <3>;
70
+					label = "lan4";
71
+				};
72
+				port@4 {
73
+					reg = <4>;
74
+					label = "lan5";
75
+				};
76
+				port@5 {
77
+					reg = <5>;
78
+					label = "cpu";
79
+					ethernet = <&eth0>;
80
+					fixed-link {
81
+						speed = <1000>;
82
+						full-duplex;
83
+					};
84
+				};
85
+			};
86
+		};
87
+		ksz8565: ksz8565@0 {
88
+			compatible = "microchip,ksz8565";
89
+			reg = <0>;
90
+
91
+			spi-max-frequency = <44000000>;
92
+			spi-cpha;
93
+			spi-cpol;
94
+
95
+			ports {
96
+				#address-cells = <1>;
97
+				#size-cells = <0>;
98
+				port@0 {
99
+					reg = <0>;
100
+					label = "lan1";
101
+				};
102
+				port@1 {
103
+					reg = <1>;
104
+					label = "lan2";
105
+				};
106
+				port@2 {
107
+					reg = <2>;
108
+					label = "lan3";
109
+				};
110
+				port@3 {
111
+					reg = <3>;
112
+					label = "lan4";
113
+				};
114
+				port@6 {
115
+					reg = <6>;
116
+					label = "cpu";
117
+					ethernet = <&eth0>;
118
+					fixed-link {
119
+						speed = <1000>;
120
+						full-duplex;
121
+					};
122
+				};
123
+			};
124
+		};
125
+	};