~hc/RK356X_SDK_RELEASE.git

..	..	@@ -7,6 +7,9 @@
7	7	More detailed documentation can be found in
8	8	Documentation/devicetree/bindings/media/video-interfaces.txt .
9	9
	10	+The device node should contain a "port" node which may contain one or more
	11	+endpoint nodes, in accordance with video interface bindings defined in
	12	+Documentation/devicetree/bindings/media/video-interfaces.txt .
10	13
11	14	Mandatory properties
12	15	--------------------
..	..	@@ -24,8 +27,6 @@
24	27	Optional properties
25	28	-------------------
26	29
27		-- nokia,nvm-size: The size of the NVM, in bytes. If the size is not given,
28		- the NVM contents will not be read.
29	30	- reset-gpios: XSHUTDOWN GPIO
30	31	- flash-leds: See ../video-interfaces.txt
31	32	- lens-focus: See ../video-interfaces.txt
..	..	@@ -37,9 +38,7 @@
37	38	Endpoint node mandatory properties
38	39	----------------------------------
39	40
40		-- clock-lanes: <0>
41	41	- data-lanes: <1..n>
42		-- remote-endpoint: A phandle to the bus receiver's endpoint node.
43	42
44	43
45	44	Example
..	..	@@ -48,7 +47,7 @@
48	47	&i2c2 {
49	48	clock-frequency = <400000>;
50	49
51		- smiapp_1: camera@10 {
	50	+ camera-sensor@10 {
52	51	compatible = "nokia,smia";
53	52	reg = <0x10>;
54	53	reset-gpios = <&gpio3 20 0>;
..	..	@@ -58,8 +57,7 @@
58	57	nokia,nvm-size = <512>; /* 8 * 64 */
59	58	link-frequencies = /bits/ 64 <199200000 210000000 499200000>;
60	59	port {
61		- smiapp_1_1: endpoint {
62		- clock-lanes = <0>;
	60	+ smiapp_ep: endpoint {
63	61	data-lanes = <1 2>;
64	62	remote-endpoint = <&csi2a_ep>;
65	63	};